Used Stama Mc 010 for sale (32)

Condition: used, Year of construction: 1987, x-travel 500 mm Bljdjt Hw H Ejpfx Ahvod y-travel 380 mm z-travel 300 mm Control FANUC total power requirement 12 kW weight of the machine ca. 2300 kg dimensions of the machine ca. m

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: KMM526 1506, travel distance X-axis: 1,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, controller model: FANUC SERIES 18i-MB 5, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you are obligated to collect the item within the specified dates, either between 11.05.2026 and 13.05.2026, or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS Travel X-axis: 1,000 mm Travel Y-axis: 400 mm Travel Z-axis: 360 mm Table dimensions: 1,500 x 470 mm Overhang: 350 mm Tool holder: SK 40 Spindle speed: 36 to 12,000 rpm Spindle bearing diameter: 65 mm Max. tool diameter: 125 mm Max. tool length: 250 mm Feed rate X/Y/Z-axis: 1 - 10,000 mm/min Rapid traverse X/Y/Z-axis: 45 m/min MACHINE DETAILS Control: FANUC SERIES 18i-MB 5 Operating voltage: 400 V Frequency: 50 Hz Bledoym Nqkspfx Ahvjd Nominal current: 45 A Dimensions & Weight Dimensions (L x W x H): 2,700 x 2,700 x 3,300 mm Weight: 6,000 kg EQUIPMENT 4th axis 42-position tool changer Chip conveyor Coolant system Note: The clamping devices shown in the photos are not included. External reference: Elos – Lot 1

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, controller manufacturer: SIEMENS, controller model: 840D, overall weight: 6,200 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 18,500 W, tool weight: 5,000 g, number of axes: 4, This 4-axis STAMA MC 326 vertical machining centre was manufactured in 2011. It features a travel of 700 mm in the X-axis, 400 mm in the Y-axis, and 360 mm in the Z-axis. The machine is equipped with a spindle power of 18.5 kW and a tool magazine capacity of 48 tools. If you are looking to get high-quality machining capabilities, consider the STAMA MC 326 machine we have for sale. Contact us for further details. • Rapid traverse (X/Y/Z): 60 m/min • Feed rate: 1–10,000 mm/min • Acceleration: X/Y 5 m/s², Z 12 m/s² • Spindle: up to 300 Nm • Tool magazine: 48 tools; max tool Ø 88 mm; max tool length 300 mm; tool change approx. 2.4 s • Rotary table: diameter 180 mm (NC 4th axis) • Coolant system: tank 900 L; filtration 50 µm; pressure up to 25 bar • Hydraulics: 250 bar • Compressed air supply: 6 bar • Connected load: 28 kVA • Power supply: 3 × 400 V / 50 Hz Additional equipment • Rear chip conveyor • NC rotary table (4th axis), Ø 180 mm Bedpfeymduwox Ahvsld Technical Specification Taper Size SK 40

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, machine/vehicle number: 5301168, travel distance X-axis: 3,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, controller model: SIEMENS SINUMERIK 840 C, number of slots in tool magazine: 42, No reserve price – guaranteed sale to the highest bidder! Placing a bid commits you to collection within the specified timeframe: between 08.04.26 and 16.04.26! No reserve price – guaranteed sale to the highest bidder! Placing a bid commits you to collection within the specified timeframe: between 08.04.26 and 16.04.26! TECHNICAL DETAILS Travel X-axis: 3000 mm Travel Y-axis: 400 mm Travel Z-axis: 350 mm Tool holder: SK 40 Bsdpfoyk Eckex Ahvsld MACHINE DETAILS Control: SIEMENS SINUMERIK 840 C Operating voltage: 400 V Frequency: 50 Hz Rated current: 60 A Dimensions & Weight L x W x H: 8000 x 3500 x 3300 mm Machine weight: 15 t EQUIPMENT Chip conveyor Coolant system The sale does not include the clamping devices visible on the clamping surface in the photos! The machine can be transported on a truck with a maximum width of 3000 mm.

Condition: ready for operation (used), Year of construction: 2011, - USED - TWIN-SPINDLE HEAD 3-AXIS VERTICAL MACHINING CENTRE WITH ROTOPALLET X-AXIS TRAVEL: 520 mm Y-AXIS TRAVEL: 360 mm Z-AXIS TRAVEL: 360 mm DISTANCE SPINDLE NOSE-TABLE: 200-560 mm RAPID FEEDS X-Y-Z: 60 m/min SPINDLE: 36 - 10500 rpm; 30 - 35 kW; HSK A63 PALLET: N.2 MAX ADMITTED LOAD: 450 Kg TOOL MAGAZINE: 21X2 POS MAX TOOL DIAMETER: 88 (125) mm MAX TOOL LENGHT: 250 mm CONTROL UNIT: FANUC 31i A5 WEIGHT: 5300 Kg OVERALL DIMENSIONS: 3200 x 3250 x 3245 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; HIGH PRESSURE COOLANT PUMP ; TOOL SETTER NOTE: WITH No 1 4th AXIS TABLE Blsdpfxsx U E Szo Ahved

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: KMM 326-2510, Used CNC Vertical Machining Center Make: Stama Model: MC 326 – Twin-Plus Year of manufacture: 2004 Machine type: Vertical Double-Spindle Machining Center Control system: Siemens Sinumerik 840D Powerline Travel paths (working area) X-axis: approx. 520 mm Y-axis: approx. 300 mm Z-axis: approx. 360 mm Spindle & Tooling Number of spindles: 2 (twin/double spindle) Spindle taper: HSK-A63 Max. spindle speed: approx. 10,000 – 12,000 rpm Spindle distance: approx. 200 mm Blsdpfxoyklycs Ahvod Tool magazine: Chain magazine with 2 × 30 positions Table & Workpiece Worktable: Stationary, suitable for clamping devices or additional units Weight & Dimensions (approx.) Machine weight: approx. 6,500 kg Footprint: approx. 3.0 × 4.2 × 2.8 m (L×W×H, without auxiliary units)

Condition: used, Year of construction: 2013, functionality: fully functional, Operating hours: Machine runtime 33,520 h, Axes in motion 22,595 h List of clamping devices: - Main spindle Hainbuch SK80 Axzug - Hainbuch SK80 Axfix with various smooth and serrated collets Bsdsxlcbropfx Ahvsld Equipment: - 6-sided turning and milling center - Main spindle with swiveling rotary table - Counter spindle with swiveling rotary table and tailstock function - HSK63 spindle 10,000 rpm - 120 magazine positions - IRCO ILS MUK short bar loader - Hinged belt conveyor - High-pressure coolant system (with cooler) Sale only within the EU.

Condition: used, Year of construction: 1999, Technical details: x-axis: 800 mm y-axis: 500 mm z-axis: 510 mm control: Siemens 840D number of spindle speeds: 36 - 10000 U/min. tool changer with: 42 tools tool clamping: 12000 N tool taper: SK40 max. torque on the spindle: 102 Nm feed continuous: X/Y/Z: min./max.: 1/10000 / 1/10000 / 1-10000 mm rapid traverse: X/Y/Z: 40/40/40 m/min voltage: 400 / 50 V / Hz total power requirement: 70 kW HIGH PERFORMANCE DRIVING COLUMN - MACHINING CENTER Coolant system with paper band conveyor chip conveyor make Flender MC535/x=800 hydraulic aggregate make HAWE Loading system Promo cutting values: max. milling capacity=400mm max. drilling Ø 50mm Bledpfx Aju Id Rbshved max. thread Ø M30 1 motor each for main spindle 1 + 2: make Kessler; 21 kW; speed 15.000 rpm. 1 motor each for X / Y / and Z-axis: Make Siemens; for X/Y axis 14.0 Nm and Z axis 17.6 Nm torque; speed 3000 rpm. *

Condition: ready for operation (used), Year of construction: 1994, A CNC 3-axis machining center Stama is available. Travel X/Y/Z: 1000mm/400mm/350mm, table dimensions X/Y: 1500mm/430mm, max. table load: 1200kg. Spindle power: 5.5kW, spindle taper: SK30, tool positions: 12, torque: 47Nm, spindle bearing diameter: 60mm, speed: 6000rpm. Positioning resolution: 0.001mm, positioning tolerance: +/-0.01mm, repeatability: 0.005mm, rapid traverse: 20m/min, feed rate: 5m/min. Drilling capacity (steel): 25mm, tapping capacity (steel): M24, milling capacity (steel) SK30/SK40/aluminum: 150cm³/180cm³/500cm³. Machine dimensions X/Y/Z: approx. 3200mm/2300mm/2500mm, weight: approx. 5500kg, control: Fanuc Series 0-M. Including C-axis and floppy disk drive. Without vises and tool holders (SK30). The cover of the Y-axis ball screw is missing. Documentation available. An on-site inspection is possible. Bjdpfxsxl Upus Ahvold

Year of construction: 2009, condition: ready for operation (used), Travel X/Y/Z: 2200mm/520mm/510mm, rapid traverse X/Y/Z: 40m/min, number of spindles: 2, speed: 10000rpm, spindle power: 22kW, spindle bearing: 95mm, max. torque: 300Nm, tool holder: HSK A100, max. milling capacity: 500cm³, max. drilling diameter: 50mm, max. thread diameter: M36. Table dimensions X/Y: 2x 1250mm/250mm, spindle table distance min./max.: 250mm/760mm, max. workpiece weight: 2x 1500kg, max. tool length: 320mm, tool positions: 2x 21, tool clamping: 45000N. Dimensions X/Y/Z: approx. 4000mm/6500mm/3800mm, weight: approx. 11000kg, operating hours: 37771h. Including sheet metal technology SHA KMB 900, volume: 900l, and magnetic plate. Documentation available. Bjdpjt E Tp Tjfx Ahvjld

Condition: used, Year of construction: 2004, operating hours: 77,366 h, STAMA MC 326/TWIN-Plus – Technical Specifications General Information: Manufacturer: STAMA Maschinenfabrik Model: MC 326 / TWIN-Plus Year of Manufacture: 2004 Control Unit: Siemens Sinumerik (840D Powerline) Machine Type: Twin-Spindle Vertical Machining Center Working Range / Travels: X-axis: 520 mm (Standard for MC 326) Y-axis: 300 mm (Standard for MC 326) Z-axis: 360 mm (Standard for MC 326) Spindle Distance: 200 mm (Distance between the two spindles) Milling Spindles (Twin Setup): Bljdpfxjyh Nruo Ahvjd Number of Spindles: 2 (Simultaneous operation) Max. Spindle Speed: 10,000 / 12,000 RPM (Typical for this model) Tool Taper: HSK-A63 Tool Changer: Type: Chain magazine Magazine Positions: 2 x 20 or 2 x 30 slots (Independent magazine for each spindle) Performance & Electrical: Connection Voltage: 400V / 3~ / 50 Hz Nominal Current: 72 A Operating Hours: 77,366 hours (Shown on meter) Dimensions & Weight: Machine Weight: approx. 6,500 kg Footprint: approx. 3.0 m x 4.2 m x 2.8 m (Excluding chip conveyor) Equipment & Features: Twin-Spindle Technology: Massive productivity boost by machining two workpieces at once. Control: Siemens 840D with full alphanumeric keyboard. Table: Stationary table for mounting fixtures or rotary units. Chip Management: Integrated bed flushing and chip disposal area.

Condition: good (used), Year of construction: 2017, operating hours: 35,000 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller model: SIEMENS 840 D Solution Line, number of spindles: 2, number of slots in tool magazine: 32, Equipment: chip conveyor, rotational speed infinitely variable, - Twin-spindle machining centre - 5 axes Bljdpfsx E Sr Nox Ahvsd - Automatic tool changer with 2x 16 tool positions Further details available on request.

Condition: ready for operation (used), Year of construction: 1994, Main Drive Number of axis 5 Additional Equipment Tool Magazine: 60 SK40 positions with vertical chain and double gripper / Drilling Capacity in Steel: 25 mm / Tapping Capacity in Steel: M24 / Milling Capacity in Steel (SK 30): 150 cm³/min / Milling Capacity in Steel (SK 40): 180 cm³/min / Milling Capacity in Aluminum: 500 cm³/min Bedex D Sqgepfx Ahvsld Chip Conveyor: Scraper belt / Flushing Gun for Chip Flushing / Coolant/Air Blast Switching: External via M function / Infrared Measuring Probe: Heidenhain TS 649 DMG / 3D quickSET: Toolkit for checking and correction of kinematic accuracy This 5 axis STAMA MC 520 was manufactured in 1994. It features a robust vertical machining centre with a clamping area up to 3000 x 430 mm and a permissible table load of 1600 kp. Equipped with a high-speed spindle capable of 6000 rpm and optional 10000 rpm, it ensures efficient machining. The machine includes a 60-position SK40 tool magazine and a scraper belt chip conveyor. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand FANUC Model 18i-MB5 Main Drive Number of axis 3 Spindle Speed 12000 RPM Spindle motor power 21 kW Blodpfx Ahsx D E Rmevjd Tool taper HSK 63 Movement X-Axis Movement 1000 mm Z-Axis Movement 360 mm Y-Axis Movement 400 mm This 3-axis STAMA MC 526 vertical machining center was manufactured in 2008. It features a Fanuc 18i-MB5 CNC, twin-spindle with double tool changer, and a high-pressure coolant system. The machine offers a spindle speed of 12,000 rpm, spindle power of 21 kW, and a tool capacity of 60. X/Y/Z travels are 1000/400/360 mm respectively. If you are looking to get high-quality milling capabilities consider the STAMA MC 526 machine we have for tact us for more information. Application Types Milling

Condition: ready for operation (used), Stama MC 734 MT (Machine Number 5) Tool magazine: 48 stations on chain and 90 stations in additional magazine Milling spindle: 12,000 rpm Tool holder: Capto C6 Control: Fanuc Series 31i-Model A5 Coolant system and chip conveyor Operating hours: approx. 48,974 h Machining time: 19,357 h Travel paths: X: 800 mm, Y: 520 mm, Z: 510 mm Bledpfx Aovw Supohvjd Rapid traverse: 60 m/min Coolant system Clara extraction system not included in scope of delivery! More photos available upon request. You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. The specified company names and trademarks are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the item description may occur and are reserved.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: KMM5352002, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 42, Robot loading unit is untested. TECHNICAL DETAILS X-axis: 800 mm Y-axis: 500 mm Z-axis: 510 mm Control: Siemens 840D Spindle and Drive Spindle speed: 36 - 10,000 rpm Spindle torque: max. 102 Nm Tool clamping: max. 12,000 N Tool holder: SK40 Number of tool positions: 42 Feeds Feed rate x/y/z-axis: 1 - 10,000 mm/min Rapid traverse x/y/z-axis: 40 m/min Cutting capacity Milling capacity: max. 400 mm Drilling diameter: max. 50 mm Thread diameter: max. M30 Motors Main spindle motor 1 + 2: Make Kessler Power: 21 kW Speed: 15,000 rpm Servo motor x/y-axis: Siemens Torque: 14.0 Nm Speed: 3,000 rpm Servo motor z-axis: Siemens Torque: 17.6 Nm Speed: 3,000 rpm MACHINE DETAILS Voltage: 400 V / 50 Hz Total power requirement: 70 kW EQUIPMENT Bodpfxowlphno Ahveld - Coolant system with paper belt conveyor - Chip conveyor: Flender MC535/x=800 - Hydraulic unit: HAWE - Promo loading system - untested

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: KMM3312510, travel distance X-axis: 800 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, table width: 530 mm, table length: 350 mm, spindle speed (max.): 10,500 rpm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item by 31.07. at the latest! CNC machining center with 2 spindles and 2 swiveling tables! TECHNICAL DETAILS Travel X: 800 mm Travel Y: 400 mm Travel Z: 350 mm Spindle Spindle interface: HSK A63 Spindle speed: max. 10,500 rpm Table Table dimensions: approx. 530 × 350 mm Control Control system: SIEMENS SINUMERIC 840 D MACHINE DETAILS Connection voltage: 400 V 3~ Frequency: 50 Hz Rated current: 87 A Main fuse: 3 × 100 A Min. cable cross-section: 4 × 25 mm² Blsdpfx Aewyli Rjhvsd Dimensions & Weight Dimensions (L × W × H): 4,800 × 4,200 × 4,000 mm Weight: 8,800 kg Transport will most likely be carried out using a truck with a width of over 3,000 mm. Further information is available during dismantling and loading.

Year of construction: 2004, condition: good (used), functionality: fully functional, including robot arm FANUC Robot ARC Mate 120iB TECHNICAL DETAILS Bledpfx Ajl Eykgehvod X-axis: 700 mm Y-axis: 400 mm Z-axis: 360 mm speed: 10.000 rpm Control: Fanuc 16i MB Table diameter: 1400 mm feed X-axis: 10000 mm/min. feed Y-axis: 10000 mm/min. feed Z-axis: 10000 mm/min. rapid traverse: 70 m/min tool holder: Big Plus ISO/Bt/Mk Spindle power: 21 kW Torque (Twin / Single): 120 / 155 Nm number of tools: 2 x 30 tool diameter: 140 mm tool length: 280 mm milling capacity: max. 350 ccm Drill diameter: max. 40 mm Thread diameter: max. M27 MACHINE DETAILS length: 6000 mm width: 6000 mm height: 2800 mm weight: 12000 kg Total connected load: 55 kVA Total power consumption: 44 kW Voltage: 400 V Frequency: 50 Hz

Year of construction: 1990, condition: used, table mounting size: 700 x 1200 mm movements x/y/z: 600/300/350 mm spindle taper: SK 40 ISA min./max. distance table/spindle: 150/540 mm spindle turning speed range: 45 - 6000 rpm number of tool positions: 12 pieces carriages: 5000 - 20000 mm/min Bledoda S Nvopfx Ahved rapid move: 5000 - 20000 m/min spindle drive: 5,5 kW electrical connection: 380 V, 12 kVA kW space needed: 2350 x 2100 x 2500 mm weight: 3800 kg

Condition: used, Year of construction: 1990, x-travel 500 mm y-travel 300 mm z-travel 350 mm total power requirement 12 kW weight of the machine ca. 3800 kg Bledpfxst Hwy Eo Ahvod dimensions of the machine ca. m

Condition: used, Year of construction: 1998, x-travel 800 mm y-travel 500 mm z-travel 510 mm total power requirement 60 kW weight of the machine ca. 10 t dimensions of the machine ca. m Bsdpfxst Hwtfe Ahvjld

Condition: used, Year of construction: 1997, x-travel 800 mm y-travel 400 mm z-travel 350 mm total power requirement 40 kW weight of the machine ca. 8 t dimensions of the machine ca. m Bsdpst Hwx Iofx Ahvsld

Condition: used, Year of construction: 2000, x-travel 800 mm y-travel 500 mm z-travel 510 mm total power requirement 60 kW Bljdpfx Ahjt Hwyrsvod weight of the machine ca. 10 t dimensions of the machine ca. m

Condition: refurbished (used), Year of construction: 1999, machine/vehicle number: KMM3312068, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, number of slots in tool magazine: 21, controller manufacturer: SIEMENS, controller model: 840d pl, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, rapid traverse Z-axis: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, distance between spindles: 266 mm, Equipment: chip conveyor, Vertical double head machining center, partially reconditioned, and fully operational. Blodpfx Aotzy Egohvjd

Condition: used, Year of construction: 1998, operating hours: 95,000 h, machine/vehicle number: KMH 014110, Technical Data CNC control: FANUC 16iM - 16i Operating hours: 95,000 h Travel (X × Y × Z): approx. 500 × 380 × 300 mm Table size: 650 × 380 mm Spindle taper: ISO/BT 30 Spindle power: approx. 5.5 kW Spindle speed: up to 8,000 rpm Rapid traverse: approx. 48 m/min Bjdpfx Ahoyn Nv Noveld Tool magazine: approx. 14 positions (ISO30 - BT30) Chip and coolant tank with pump Integrated fluid lubrication system The machine can be inspected under power by prior appointment. Technical data and specifications are subject to change and correction. Prior sale reserved!