Used Indexing Device for sale (12,262)

Year of construction: 2025, operating hours: 80 h, condition: used, functionality: fully functional, laser power: 200 W, machine/vehicle number: ELXX-25100004, For sale is a professional, pulsed laser cleaning machine (pulse laser) of the type GL-PM-200 from the manufacturer EraserLaser GmbH. The unit dates back to the 2025 model year, has very few operating hours, and is in excellent, fully functional condition. In contrast to continuous CW lasers, this pulsed system is ideally suited for extremely precise and material-friendly cleaning. It is the ideal solution for demanding tasks where the base material (e.g., sensitive molds, historical components, weld seam preparation, or precision tools) must not be subjected to any thermal influence or material removal. Rust, paint, oils, and oxide layers are removed precisely and without leaving any residue. Product benefits & highlights: Maximum precision without heat input: Thanks to the fine adjustment of pulse width (20–500 ns) and frequency, the cleaning can be precisely tailored to sensitive surfaces. Compact & flexible: The laser is housed in a robust enclosure and can be ideally used in mobile applications. Extensive parameter control: Parameters such as laser power, scan speed, frequency, and track density (Spiral Series) can be precisely controlled via the intuitive 7-inch touch display. Quick access to memory locations: Up to 5 user-defined work modes can be saved to allow quick switching between different cleaning requirements in everyday work. Easy maintenance & care: Low maintenance thanks to reliable air cooling. Integrated preview laser for precise alignment of the cleaning area on the workpiece. Technical data at a glance: Model: GL-P-M-200 Laser type: Pulsed fiber laser (pulse laser), Laser Class 4 Wavelength: 1064 nm Laser power: 200 watts (continuously adjustable from 10% to 100%) Laser frequency: 5 kHz – 4000 kHz Pulse width: 20 ns – 500 ns Cleaning area (length x width): Variable, adjustable up to 100 mm x 20 mm Fiber length (hose assembly): 4 to 10 meters Cooling: Air-cooled Power connection: 220V AC (Schuko plug, fuse rating min. 16A) Condition & scope of delivery: Condition: Very well-maintained, used condition, hardly used, visually and technically flawless. The protective lens and optics are clean and fully functional. Scope of delivery: Laser cleaning system GL-P-M-200 including hose assembly and cleaning gun. Itodpfx Ajziww Aehbsn Important safety note: Operating a system of Laser Class 4 requires the mandatory use of approved laser safety goggles (DIN EN 207 for the wavelength range of 1064 nm) as well as compliance with applicable occupational safety regulations (including respiratory protection/extraction).

Year of construction: 2025, operating hours: 80 h, condition: used, functionality: fully functional, laser power: 1,500 W, machine/vehicle number: ELKY-2504021, For sale is a professional, continuous laser cleaning machine (Continuous Wave) of the type GL-C-CWM-1500, manufactured by EraserLaser GmbH. The unit was manufactured in 2025, has very few operating hours, and is in excellent, fully functional condition. This system is ideally suited for the fast, thorough, and non-contact removal of rust, paint, oils, grease, and oxide layers from metallic surfaces. Thanks to its high power of 1500 watts and the particularly long hose package, the unit offers maximum flexibility in professional workshop or industrial environments. The exact, cumulative operating hours can be read transparently directly on the system display. Product advantages & highlights: High flexibility: The 15-meter-long fiber optic hose package enables comfortable working, even on large components, in hard-to-reach areas, or on scaffolding. Precise control: Parameters such as laser power, frequency, and beam width can be set precisely via the intuitive 7-inch touch display and saved as presets. Gentle surface treatment: The variably adjustable pulse rate allows the heat input to be regulated precisely – also ideal for more sensitive workpieces or thin sheets. Reliable cooling: An integrated Hanli water cooling system ensures stable temperature monitoring and enables trouble-free operation in continuous mode. Ergonomic cleaning gun: Equipped with a red preview laser for accurate alignment of the cleaning area and an automatic compressed air control to protect the optics from dirt particles. Technical data at a glance: Model: GL-C-CWM-1500 (mobile steel housing on heavy-duty rollers) Laser type: CW fiber laser (Continuous Wave), laser class 4 Wavelength: 1070 nm Laser power: 1500 watts (continuously adjustable from 10% to 100%) Laser frequency: 1000 Hz – 9000 Hz Cleaning width: 1 mm to 150 mm (variably adjustable) Fiber length (hose package): 15 meters Power connection: 220V AC / 32A connection (protected with 25A) Condition & scope of delivery: Condition: Very well-maintained used condition, low operating hours, optically and technically flawless. Protective lenses and optics are clean and fully operational. Scope of delivery: Laser cleaning system GL-C-CWM-1500 including 15m hose package and cleaning gun. Important safety note: The operation of a system of laser class 4 requires the mandatory wearing of approved laser safety glasses (DIN EN 207 for 1070 nm) as well as compliance with applicable occupational safety regulations (including extraction). Itodpfxsziwwio Ahbsn

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Tool presetting machine / used Manufacturer: Garant Type: VG1 Year of manufacture: 11/2022 Serial number: XXXXX • 15-inch touchscreen, intuitive and user-friendly operation via icons • With calibration equipment on the base plate • Digital camera with 24x magnification • Quick adjustment of both axes (X / Z) individually or simultaneously • Fine adjustment of both axes (X / Z) • Spindle with 4 x 90° indexing and spindle brake Iedpfx Ahez Sb Drobjtn • Roundness and flatness error of the spindle max. 2 µm • With SK50 base adapter + HSK-A63 + VDI-30 adapter Technical data: • H x W x D: 1,060 x 400 x 860 mm • Weight: 150 kg • Measuring range X/Z: 400/500 mm • Includes label printer

Year of construction: 2017, condition: like new (used), machine/vehicle number: 81100543, The machine is ready for operation and has only been in use for 3 years since its purchase. The device was installed in a production line for soups in 220 ml to 360 ml packages. Production series: SC-3000-XXX Scanning width: 320 mm Optical resolution: 1 pixel = 0.16 mm Iedpfx Ahszrh D Sebjtn Rated voltage: L1/N/PE 230V AC Rated frequency: 50 Hz (+/-2%) 1.6 kVA Connected load: 16 A Protection class: IP65 Lamp type: MXR-160HP/20 Operating temperature range: 5°C - 40°C Machine weight: 420 kg Length: 1750 mm Depth: 720 mm Height: 2290 mm EU Declaration of Conformity Option to start the machine on-site.

Condition: like new (used), Year of construction: 2020, FIBRO FIBROTOR EM12 Rotary Indexing Table 6+ units available Manufacturer: FIBRO Model: FIBROTOR EM12 Type: Rotary Indexing Table / Indexing Drive Condition: Installed in IMA line that was never commissioned. Almost new condition Ijdpfx Asz Nahbohbjtn Application: Automated production, assembly, machining, handling and indexing systems EM.12.0220.9.152.08.0.0.3 0008143150-010-01 Description FIBRO FIBROTOR EM12 rotary indexing table, designed for high-precision intermittent rotary positioning in automated manufacturing and production machinery. The FIBROTOR range is widely used in industrial automation applications where accurate, repeatable indexing and positioning of workpieces or tooling is required. The EM12 provides a robust mechanical indexing solution and is suitable for integration into automated assembly lines, machining systems, transfer machines, packaging equipment and other special-purpose machinery. Key Features: FIBRO FIBROTOR EM12 rotary indexing table Precision intermittent rotary indexing Robust industrial construction Suitable for automated production machinery Repeatable positioning Designed for continuous industrial operation Suitable for assembly, machining, handling and transfer applications Compact mechanical indexing solution FIBRO quality engineering Keywords: FIBRO, FIBROTOR, EM12, rotary indexing table, indexing table, rotary indexer, indexing unit, rotary table, indexing drive, automation, industrial automation, machine tool, assembly machine, transfer machine, CNC, manufacturing, production line, industrial machinery, precision indexing, mechanical indexer.

Condition: good (used), Year of construction: 1966, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heitze, container rotating device, welding rotating device type 406/2 G -Load capacity: kg -Roller spacing: 290 - 1100 mm -Rollers: Ø 225 x 300 mm -Rolling speed: 0.24 to 1.30 m/min Right/Left rotation -Control unit: with hand control and foot switch -Individual components: see photos -Transport dimensions: 1380/1110/H900 mm / 940/660/H900 mm Iedpfxjz Ruwuj Ahbotn -Weight: 706 kg / 463 kg

Year of construction: 2022, operating hours: 15 h, condition: used, functionality: fully functional, operation weight: 30 kg, feed force X-axis: 20,000 N, pipe diameter (max.): 14 mm, machine/vehicle number: 79000, Lancier Smart Wheel 2022, used very little Very few operating hours (approx. 38 hours) Includes extensive accessories Includes HONDA EU22i generator Includes cable guiding set 2.6 mm - 3.7 mm Includes cable guiding set 6.7 mm - 9.0 mm Includes drive wheel set without groove 0.8 - 3.4 mm Includes drive wheel set with groove 3.5 - 9.0 mm Includes steel transport box Includes compressed air hose with claw coupling, 10 m Itedpfx Aezphdtjhbjn The blowing device Automatic logging For cable diameter 1.5 - 9 mm For outer pipe diameter 7 - 14 mm Blowing speed 0 - 100 m/min Thrust force 20 daN L x W x H 500 x 400 x 400 mm Weight: approx. 30 kg Order no. 79000

Condition: good (used), Year of construction: 2020, functionality: fully functional, The Koch company’s material suction unit is available; the price is for one unit. Isdpjz Nxlmjfx Ahbetn All units are equipped with a level sensor, a material lock, and a funnel. There are 13 units in stock. Voltage: 24 V DC Height: 595 mm Weight: 12 kg Discharge connection: Nominal size: 40 mm Base size: Z5/Z12/Z24 Level sensor Material lock

Condition: excellent (used), Year of construction: 2020, ZOLLER EZset 350 – Professional CNC Tool Setting and Measuring Device – 2020 For sale is a professional ZOLLER EZset 350 measuring device, manufactured in 2020, designed for the precise setting, measurement, and inspection of cutting tools used in CNC machine tools. The ZOLLER EZset 350 is an industrial tool measuring system for offline tool measurement, enabling accurate determination of tool length, diameter, and geometry before machining. The device reduces CNC machine setup times, minimizes setting errors, and increases production efficiency. Technical data * Manufacturer: ZOLLER – Germany * Model: EZset 350 * Year of manufacture: 2020 * Type: CNC tool setting and measuring device (Tool Presetter) * Z-axis measuring range: up to 350 mm * Measuring system: optical, with camera * Control: computer-based with touchscreen * Software: ZOLLER pilot / Drive Snapshot 1.4 – according to the markings visible on the device * Computer panel: MOSTRON PPC3-13 * Device order number: EZS350C1T-00141 * Identification number: PMT0221 * Panel power supply: 12–24 V DC Device functions * Measurement of cutting tool length * Measurement of tool diameters * Inspection of CNC tool geometry * Setting of tool corrections * Optical measurement of cutting edges * Measurement of tools before mounting in the machine tool Itodpfjz Si S Dox Ahben * Support for tool wear monitoring * Reduction of CNC machine downtime * Increased repeatability of settings Equipment shown in the pictures * ZOLLER EZset 350 measuring device * Integrated optical system * Computer panel with touchscreen * Tool holder / spindle for mounting tools * Work table with frame * Pneumatic system with pressure regulator * Label printer * Additional printer located under the table * Power and connection cables shown in the pictures Application The device is intended for use in: * CNC machining centers * CNC milling and turning machines * Tool rooms * Precision manufacturing plants * Automotive and aerospace industries * Tool preparation and quality control departments Technical condition The device is used, manufactured in 2020, and is in good visual condition. The device has a calibration mark dated 29.08.2024, valid until 29.08.2025. The set is equipped with a dedicated computer panel and measuring accessories. Inspection and testing of the device are possible by prior arrangement.

Condition: good (used), The ALFRA PSG 5+ profile rail cutting device was manufactured in 2015 and is equipped with a hydraulic attachment. The length stop enables precise, repeatable cutting of profiles. An ALFRA 120 electro-hydraulic pump is connected to the hydraulic attachment and is included in the offer. The workbench is also part of the package. The device has been function-tested and has an electrical inspection performed by an electrical company. Itedpsz N Smdjfx Ahbon

Condition: ready for operation (used), functionality: fully functional, Description: A complete compression testing station, consisting of a 20T hydraulic press from RYS and a professional measuring system from AXIS, including a ZEMIC strain gauge. The equipment comes from a SHILOH production plant that is being decommissioned in Bielsko-Biała. It was used for force insertion tests, strength tests, and quality control. The set includes: RYS FR-5019 hydraulic press – 20T AXIS force meter – PEAK, PRINT functions, units in kg/N/lbs ZEMIC load cell (strain gauge) – range 2000 kg Blocks, fixtures, and tools as shown in the pictures Analog pressure gauge Hydraulics and hoses Iedpfx Asz Rvywehbetn Table height adjustment on bolts Applications: Force insertion tests Laboratory testing Quality control and R&D Assembly and disassembly of components Design workshop / toolroom

Condition: ready for operation (used), Year of construction: 2012, operating hours: 75,685 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 85 mm, travel distance Z-axis: 280 mm, spindle motor power: 20,000 W, controller manufacturer: SIEMENS, number of axes: 7, This 7-axis Index ABC horizontal turning machine was manufactured in 2012. It features a main spindle with a maximum speed of 6000 rpm and a sub spindle with a speed of 4500 rpm. The machine includes two turrets, each equipped with X and Z axes, and a powerful tool drive. If you are looking to get high-quality turning capabilities, consider the Index ABC machine we have for sale. Contact us for further details. • Main spindle: D65, spindle interface AD140, ID83, max speed 6000 rpm; max power 20 kW at 100% duty cycle; C-axis; electronic synchronization between spindles • Sub spindle: 7.5" chuck interface, max speed 4500 rpm • Spindle hours: • S1 – 18914h • S2 – 661h • S3 – 3h Itedpfx Ahozvu Rysbon • S4 – 29211h • S5 – 2413h • S7 – 1250h • The synchronous spindle was renewed in September 2024 • Chuck: 3-jaw KFN95/3, clamping force 480 daN, max 4000 rpm • Turrets: two turrets each with X and Z axis; tool drive on turret 6000 rpm, 3.3 kW • Rear working attachment: without quill, 5 quill positions • Coolant: 80 l/min at 8 bar and 20 l/min at 18 bar; system prepared for emulsion; coolant return at spindle end D60 (without bar feed) • Control: INDEX C200-4D based on Siemens 840D; color display 26 cm; thread cutting without compensating chuck; motor-current-based tool monitoring; internal tool management and setup dialog; extended machining cycles; parts counter and production monitoring • Power/connection data: 400 V, 50 Hz TN network; total connected load 45 kVA; rated power 38 kW; rated current 65 A; max fuse protection 100 A • Hydraulic hollow clamping cylinder D65 Additional equipment • Chip conveyor: hinged belt, discharge height 1250 mm • Bar feeder: MBL 65/3700 for spindle height 1010 mm; bar diameters up to 65 mm; bar feeder length 3700 mm; guide channel system with rolling bearings; loading rods (Ø12 mm and Ø20 mm, length 1400 mm); guide sets for 14–18 mm, 18–22 mm, 22–65 mm • Workpiece unloading device for main and sub spindle with part catcher • Teleservice preparation (ISDN) with software • Machine prepared for extraction system 230 V • Working area light • Two electrical cabinet cooling units • Transformer 3 kVA Technical Specification Counter Spindle Yes Driven Tools Yes

Year of construction: 2004, condition: used, functionality: fully functional, For sale: Peripheral equipment for plastic injection molding. The grinders, mills, and temperature control units were in operation until 03/2026 and have been replaced by a new machine park. 3 units Wanner grinders, Compact series C17.26, year of manufacture 2006 2 units Kurtz grinders, SR 173, year of manufacture 2002 9 units Kurtz K-mills, SR 171, year of manufacture 2003 10 units Wieser mills, WG-SR 170/110, year of manufacture 2003 1 unit Colortronic M102L sprue grinder, year of manufacture 2006 20 units HB-Term temperature control units, HB-CW 90, year of manufacture 1999 1 unit Wittmann temperature control unit, Tempro 1 TP 140, TS001537/001, year of manufacture 2000 1 unit Wittmann temperature control unit, Tempro basic 140, TS002073/001, year of manufacture 2000 3 units Wittmann temperature control unit, Tempro 2, year of manufacture 2000 Conveyor belts as shown in the picture Operating manuals available Isdez Hvgbjpfx Ahbetn Complete purchase of all items preferred; individual purchase possible by agreement.

Condition: good (used), Year of construction: 2020, functionality: fully functional, The conveyor unit from Koch is for sale; 7 units are available. The price is per unit. Supply voltage: 230V Power: 0.65 kW Weight: 3.4 kg Conveyor connection: NW -30mm Itsdpez Nxfajfx Ahbon Minimum air pressure: 4 bar

Condition: good (used), functionality: fully functional, Year of construction: 2016, This is a professional, mobile cleaning device for injection molding machines and temperature control units. It can effectively flush out contaminated and scaled channels. Upon request, an operating manual for the system can be sent by email. Itjdpfx Ahez Szn Nsbon Features of the system: Two-container system made of stainless steel, 1 container for descaling and container 2 for neutralizing agent. Pulsating cleaning through air impulses. Process monitoring. Reduces cooling times in injection molding by up to 40%.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Vacuum lifter from Schmalz for handling flat materials with a suction cup. Maximum lifting capacity: 125 kg. Schmalz model: MOD-VM-BASIC-125/250, BB-VM-BASIC-600-HI Adjustable suction cup, maximum dimensions: 1600 x 750 mm Suction cup diameter: 220 mm Vacuum pump: EVE-TR 4 AC 3 Operating lever Ijdpfx Aoz Nplkohbstn Mounted on a stand with 4 wheels.

Year of construction: 2023, condition: excellent (used), Professional pneumatic device for emptying SEMCO 600 ml cartridges and containers, designed for industrial applications (adhesives, sealants, pastes, high-viscosity materials). Manufacturer data: • Manufacturer: axiss GmbH (Germany) • Type: 9110 / B-SEMCO600-PN-KM-F • Year of production: 2023 • Serial number: 514 • Quality standard: DIN EN ISO 9001:2015 • CE marking Technical description: • Pneumatic emptying of SEMCO 600 ml cartridges • Robust construction on an aluminium profile mounting plate • Piston assembly with transparent sleeve (position control) • Pressure regulator with pressure gauge • Directional control valve • Pneumatic quick couplings • Shut-off valve (safety) Iodpfx Ahsz Slmwobstn • Vertical or horizontal mounting possible • Smooth and controlled operation

Condition: excellent (used), For sale: Professional setting device for internal micrometers SUBITO – Schwenk ESU. Very good condition, complete set in original wooden case with manual. • Model: SUBITO Einstellgerät ESU • Manufacturer: Oskar Schwenk GmbH, Germany • Complete equipment • Stable cast iron base • Precise adjustment and micrometric feed • Ideal for setting SUBITO, ESS, ESU internal micrometers • The whole set is in as-new condition Itodpfjz Slkpsx Ahbjn

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, For sale is a leak testing device from the brand JW Froehlich in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: JW Froehlich • Model: MPS-200 • Testing method: Relative pressure measurement. Optional measurement methods: pressure drop, pressure increase, overpressure, underpressure. • Testing pressure range: approx. -0.8 to 6 bar • 6.5" color monitor with touchscreen and Windows operating system • Year of manufacture: 2014 • Documentation: Leak testing seminar • Condition: Used, functional Shipping costs via freight forwarder: approx. €90 If interested, a leak calibrator LK-20 is also available! International buyers are welcome! You will receive an invoice with VAT shown. Itedpfxoz I Db Ao Ahben Inspection/collection is possible by arrangement in 42855 Remscheid. Sale from the location 42855 Remscheid, free on board. Errors in technical data and prior sale are reserved.

Condition: good (used), Year of construction: 1964, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heitze, Container rotating device, Welding rotating device type H 02.5 -Load capacity: kg -Roller spacing: 320 x 950 mm -Rollers: Ø 240 x 170 mm -Rolling speed: 0.15 to 1.35 m/min Right/Left rotation -Control unit: with manual control -Individual components: see photos -Transport dimensions: 1150/1105/H550 mm / 1100/600/H550 mm -Weight: 607 kg / 365 kg Isdpfx Aezkqt Hjhbetn

Condition: used, - Ideal assessment of the filterability and the quality of the filtrate Itodpoz Sdpwofx Ahbon - Longer total service life of the membrane filter cartridges through pre-filtration and targeted determination of the regeneration intervals - Reduction of downtime during filling due to perfect pre-filtration - Enables optimum choice of cartridge filter systems due to pilot tests - Polluting load analysis of service media (rinse water, steam condensate) - Easy handling and cleaning of the device - Variable filtration pressure - High flexibility due to a separate container for liquid to be filtered - Display of all measured data from archive - Ethernet interface for data download SPECIFICATIONS: Max. volume: 1.43 gal (5.4 l) Operating pressure: 0 – 43.5 psi (0 – 300 kPa, 0 – 3 bar) Membrane diameter: 1.85 in (47 mm) Membrane, pore size: 0.45 µm; 0.65 µm Max. temperature of medium: 176 °F (80 °C) Max. ambient temperature: 33.8 – 122 °F (1 – 50 °C) Weight: 37.5 lb (17 kg) Dimensions (L x W x H): M Measuring device: 13.8 x 11.8 x 17.7 in (350 x 300 x 450 mm) Container: Ø 7.9 in, height: 13.8 in (Ø 200 mm, H: 350 mm) Display: Micro-Panel 3,5" Color-Touch-Display

Condition: used, Mitutoyo   Quick Vision Apex QV-X404P1L-C CNC Image Processing Measuring Machine / Optical Measuring System   Manufacturer: Mitutoyo Corporation Type: QV-X404P1L-C Code No.: 363-131EU Professional CNC image measuring system for non-contact dimensional measurement tasks   For sale is a used Mitutoyo Quick Vision Apex CNC image processing measuring machine, including existing PC system, two monitors, control unit, measuring software, and extensive documentation.   The existing PC system and the installed QVPAK software start up. However, the complete machine and measuring function could not be fully tested.   The Quick Vision series is used for non-contact dimensional measurement of workpieces by means of an optical system, image acquisition, and image processing. Suitable for precise measuring and testing tasks, among others, for components from the fields of electronics, precision mechanics, and industrial manufacturing.   Technical data:   Manufacturer: Mitutoyo Corporation Model: Quick Vision Apex Type: QV-X404P1L-C Code No.: 363-131EU Country of Manufacture: Japan Machine type: CNC image processing measuring machine   Measuring range X / Y / Z: approx. 400 × 400 × 250 mm Measuring principle: non-contact optical image measurement CNC-controlled measuring system   Existing measuring software: Mitutoyo QVPAK QVPAK (R): Version 7.502.0010 QVGEO: Version 7.502.0010 Statistics: Version 7.502.0010   Equipment:   Mitutoyo Quick Vision Apex measuring machine PC workstation Fujitsu Siemens CELSIUS PC system 2 Fujitsu monitors Keyboard and mouse Mitutoyo control unit / joystick with emergency stop QVPAK measuring software Mitutoyo MCOSMOS / MiCAT data carriers GEOPAK documentation QVPAK documentation Other Mitutoyo operating manuals and documents Clamping plate / workpiece fixture as shown in the pictures Connection cables and accessories as shown in the pictures   Application areas:   Optical dimensional inspection Non-contact workpiece measurement Quality assurance Precision metrology Component and contour inspection Manufacturing and process control   Scope of delivery:   Mitutoyo Quick Vision Apex QV-X404P1L-C with PC workstation, monitors, control unit, existing software, documentation, and accessories as shown in the pictures. Scope of delivery is limited to what is shown in the pictures.   Condition:   Used Isdpoztyabefx Ahbetn Optical condition according to pictures PC system and existing QVPAK software start up. Signs of wear and tear due to age and use are present. Visible damage / signs of wear are present on the machine housing, see pictures.   Important note: The machine has not been tested, as it is in a protective mode after being moved. This is also intended by the manufacturer when transporting the machine. The machine must be recommissioned by qualified Mitutoyo personnel.   Shipping by freight forwarder is possible. Subject to changes, errors and prior sale.   We would be happy to answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2019, 1.0 unit, two-component dispensing system with material feed and mixer. Manufacturer: KOCH - Technik Type: GK-65 / 612D / GK65 / Year of manufacture: 2019 Iedpfoz Hn Ecex Ahbotn

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18031539, workpiece weight (max.): 750 kg, workpiece diameter (max.): 600 mm, total width: 650 mm, total length: 704 mm, total height: 585 mm, empty load weight: 334 kg, input voltage: 400 V, type of input current: three-phase, JAVAC POS-750AC welding positioner for sale. Technical specifications: - Manufacturer: JAVAC - Model: POS-750AC - Year: 2018 - Serial Number: 18031539 - Input voltage: AC 400 V / 50 Hz Iedozuyaqjpfx Ahbstn - Permissible welding current: 400 A / 100% - Table diameter: 600 mm - Hollow shaft: 60 mm - Table speed: 0.12–1.2 rpm - Tilting range: 0–135° - Max. vertical load: 750 kg - Weight: approx. 334 kg - Approximate dimensions: 704 x 650 x 585 mm Used equipment, sold as is. Currently available for inspection but not connected to power. Condition and completeness are shown in the photos. Location: Estonia. Loading: Forklift and pallet handling facilities are available on-site. We can load the equipment onto the buyer’s truck. Transportation: Transportation costs are the responsibility of the buyer.

Condition: used, Universal   Shaker angle adapters / adapter devices   Universal shaker accessories Heavy-duty aluminum angle adapters, clamping devices, and adapter elements for vibration testing systems, vibration tests, and special applications   For sale is a used accessory set for an electrodynamic shaker or vibration testing system.   The set consists of various heavy-duty aluminum angle adapters, adapter plates, clamping devices, clamping blocks, and other accessories. Ideal for test specimen mounting, special designs, and vibration tests.   Technical data:   Manufacturer: unknown Type: Accessory set for electrodynamic shaker / vibration testing system Material: predominantly aluminum Design: angle adapters, adapter plates, clamping devices, and fasteners   Components: Several heavy-duty angle adapters Adapter plates of various sizes Clamping and tightening devices Clamping blocks and adapter elements Fastening materials and other accessories as shown in the pictures   Features:   Heavy-duty aluminum construction Threaded and clearance holes Universally applicable Angle adapters for test specimen mounting Adapter plates Clamping and tightening devices Accessories as shown in the pictures   Application areas:   Electrodynamic shakers Vibration testing systems Vibration testing Material testing Itjdpozpx Ucefx Ahbsn Environmental simulation Research and development Automotive industry Test specimen mounting and special designs   Scope of supply:   Complete accessory set as shown in the pictures Angle adapters Adapter plates Clamping devices Clamping blocks Fastening materials Other accessories as shown in the pictures   Weight: 600 kg   Condition:   Used Visual condition as shown in the pictures. Normal signs of wear and tear, scratches, and pressure marks are present.   Only the accessories shown in the pictures are sold.   The table shown in the pictures or other items not explicitly mentioned are not included in the sale.   Shipping on a pallet or collection is possible. Subject to changes, errors, and prior sale.   We will be happy to answer any further questions by telephone.