Used Indexing Device for sale (12,877)

Condition: good (used), Welding rotary device, container rotary device, welding rotary device, welding rotary device, welding device, welding rotary table, welding rotary device, gearbox, spur gear gearbox, bevel gearbox -Manufacturer: Guso, welding rotary device, container rotary device on a solid base frame Hodpjzkfr Dsfx Aa Eefi -Load capacity: kg -Control: with handheld terminal and foot pedal -Three-jaw chuck: Ø 400 mm, three-jaw chuck bore Ø 130 mm -Speed: 0-2 1/4 rpm Right/Left rotation -Axles: 1 piece -tiltable: No -Height adjustment: Yes -Transmission: switchable 2 stages -Manufacturer Sawa- Gearbox Type -Translation: 1:1000, 1:2508 -Input shaft: Ø 28 mm -Output shaft: Ø 135 mm -Transport dimensions: 2070/1430/H1520 mm -Weight: 1880 kg

Condition: excellent (used), Year of construction: 2024, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 111549, air demand: 6 m³/h, operating pressure: 6 bar, total width: 1,300 mm, type of input current: three-phase, inner dimension length: 8,000 mm, I am pleased to present a custom-built Rosler 100-4 HD machine. This machine is used for shot blasting steel parts, where a high surface roughness is required. - Year of manufacture: 2024 - Machine operating time: 4000 hours - Mesh conveyor belt made of manganese steel, 1000 mm wide Hfodpowvgbgofx Aa Eji - Adjustable speed of the conveyor belt - 4 turbines, power 11 kW, Rutten Gamma 330 HD model - Continuously variable turbine speed control - Automatic part detection - Automatic abrasive flow control - Automatic abrasive filling - Automatic part blow-off - Rosler BF 40/40 dust collection system - The machine is additionally equipped with a wet dust collector, which enables the shot blasting of aluminum parts (additional installation fee applies). - Hot Spot chamber made of manganese steel and tool steel - The machine allows operation with media of the highest hardness (GH, sharp-edged) or cut shot, making it an ideal solution for the rubber industry, where high surface roughness is needed during the rubber vulcanization process. - Turbine blades made of cemented carbide guarantee 30,000 hours of operation. - Turbine housings made of cemented carbide provide even greater protection against wear and tear on the machine body.

Condition: good (used), Year of construction: 2013, colortronic Colorblend S metering device Hfedpfozi U Hnex Aa Eoi Stock No.: 503625 Machine type/ Device type: Metering device Manufacturer: colortronic Type: Colorblend S Year of manufacture: 2013 Volumetric metering and mixing device with a stainless steel insert in the mixing neck. The Colorblend S is mounted directly onto the inlet flange of the processing machine. This means it requires very little space. A stainless steel insert in the mixing neck divides the main component into two material streams. These flow together with the additives before entering the machine, forming a homogeneous mixture. Throughput: 0.7 - 12 kg/h Voltage: 230 V / 50 Hz

Condition: new, Year of construction: 2025, pressure: 12 bar, Innovative dust-free sandblasters combine the power of conventional sandblasting with a vacuum system that captures all dust and removed material during work. This not only eliminates the need for extensive cleanup but also protects the operator and those around them from the harmful effects of airborne particles. With a dust-free sandblaster, you can complete cleaning and surface preparation faster and more efficiently. And thanks to the intuitive controls and user-friendly design, these machines are easy to operate, even for sandblasting beginners. Hodjupzn Eepfx Aa Eofi ✅ PR 50 Dust-free Sandblaster With its versatile application capabilities, the PR 50 can handle a wide variety of surfaces, from hard metal to delicate glass. Our PR 50 is an excellent choice for those working in the automotive, construction, or cleaning industries, to name a few. Its compact size and handy design make it easy to operate and transport, even for those new to sandblasting.

Condition: ready for operation (used), Reicherter Wolpert Hardness Testing Machine / Hardness Tester Manufacturer: Reicherter Model: Briro VA II Test Loads: 50 – 100 kgf, 62.5 – 187.5 kgf, 100 – 250 kgf Manufacturer: Wolpert Model: Dia Testor 2n Throat Depth: 150 mm Hfodpfxsx U Tlve Aa Eoi Test Area Height: 300 mm Brinell (ISO 6506): 5 / 10 / 15.625 / 30 / 31.25 / 62.5 / 187.5 / 250 Vickers (ISO 6507): 5 / 10 / 20 / 30 / 40 / 50 / 125 Accessories: See photos for details You are welcome to come for an inspection. We can arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. Requirement: a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers. Stated company names and trademarks are the property of their respective owners and are used only for identification and description purposes. Deviations from technical data as well as errors in the item description may occur and are reserved.

Condition: used, Quantity: More than 10 available Used safety module / fieldbus module for industrial automation and PROFINET applications from Murr Elektronik. Manufacturer: Murr Elektronik Model: MVK-MPNIO F DI8/4 F DO4 7/8" IRT Article number: 5557 Device type: Safety device / safety module Communication: PROFINET IO Hsdpfxozi Dy Dj Aa Eofi IRT compatible: Yes Digital inputs: 8 safe inputs / 4 channels Digital outputs: 4 safe outputs Connection type: 7/8" connector Application area: Industrial automation technology Mounting type: Field mounting Condition: Used

Condition: used, Quantity: More than 10 available Used safety module / fieldbus module for industrial automation and PROFINET applications from Murr Elektronik. Manufacturer: Murr Elektronik Model: MVK-MPNIO F DI16/8 7/8" IRT Article number: 5556 Device type: Safety device / safety module Communication: PROFINET IO IRT-capable: Yes Digital inputs: 16 safe inputs / 8 channels Hfodpszi Dx Hsfx Aa Eoi Connection type: 7/8" connector Application area: Industrial automation technology Mounting type: Field mounting

Year of construction: 2020, operating hours: 50 h, condition: like new (used), functionality: fully functional, machine/vehicle number: BV200219443, 🔥 Pyrolytic Cleaning of Screws – DEMO Unit | up to Ø70 mm | Fully Automatic | 12 months warranty Efficient and safe solution for removing polymer residues from screws used in extrusion and injection molding – no deformation, no manual cleaning required. Completely made in the European Union. _____ Key Features Hodpfey Id Tqjx Aa Eofi • Suitable for all thermoplastic materials • Max. screw diameter: Ø70 mm • Vertical process – no screw deformation • Fully automatic operation (no operator required) • Cleaning time: 3–8 hours (depending on contamination) • Process temperature: 400–500 °C • Integrated gas treatment system with water tank and pump _____ Technical Data (Type PC-70) • Max. screw diameter: 70 mm • Max. screw length: 2,450 mm • Max. working height: 3,200 mm • Total power input: 25 kW _____ Condition • DEMO unit – directly from manufacturer • Excellent condition with full 12 month factory warranty. • Available immediately FCA BOCO price: 27 990,- EUR w/o VAT _____ Manufacturer BOCO Pardubice Machines, s.r.o. (Czech Republic) Over 30 years of experience in plastics processing technology

Condition: good (used), SCHUNK SVP-2 201760 TRIBOS S clamping device SRE reducing inserts Z7 (10 pieces) Hsdpfx Aozizguja Eofi In very good condition SCHUNK Tribos chuck jaws and reducing sleeves are also available.

Condition: good (used), load capacity: 3,000 kg, Protec Reiss welding rotator, optionally with a perforated table, size as desired. 360° rotation. Adjustable axis. Can be used without a perforated table for customer-specific parts or with a perforated table. Hedpfx Asziyh Dja Eefi Table height, top surface: 1.16 m. We have several of these rotators in stock. Additional cost for a new perforated table: €2,600 (2.0 x 1.0 x 0.2 m).

Condition: excellent (used), Mettler Toledo Type: TGA/DSC 1 STAR® Description For sale is a METTLER TOLEDO TGA/DSC 1 STAR® system, a high-quality and precise laboratory instrument for thermal analysis of materials. The device combines thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) in a single system, making it ideal for applications in industry, research, materials testing, and quality assurance. Features & Applications - Thermogravimetric analysis (mass changes) - DSC analysis (heat flow, melting points, Tg) Hsdpfszix Ddox Aa Esfi - Analysis of plastics, polymers, chemicals, pharmaceuticals, and materials - Temperature- and time-dependent measurements - High precision and stability - Network and PC-connectable (STAR® system) Technical Data (approx.): - Dimensions: approx. 500 × 500 × 600 mm - Manufacturer: METTLER TOLEDO - Model: TGA/DSC 1 STAR® - Sensor type: SDTA FRS2 - Power supply: 100–240 V / 50–60 Hz - Power consumption: approx. 300–600 W - Weight: approx. 35–45 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and correction!) Please feel free to contact us by phone for further questions.

Condition: good (used), functionality: fully functional, Chain mortiser LS 102 Rated power: 1800 W Rated voltage: 230 V, 50 Hz Rated idle speed: 4050 rpm Mortising depth: 100/150 mm (depending on the chain set) Hjdpfx Aezi A Elea Eofi Adjustable cross stop, steplessly adjustable from 8 to 150 mm Weight of the base unit: approx. 9 kg Slotting machine SG 500: Slotting depth, vertical/horizontal: 500 mm Slot width: 10-17 mm Slot length: 50 mm Weight: approx. 32 kg including guide rail + chain Guide frame FG 150 for mortising depth up to 140 mm

Condition: used, Tank rotating device, roll rotating device, welding rotating device, boiler rotating device Tank rotating device for welding pipes and tanks Manufacturer: PH Maschinenbau Type: PH-RBA 30000-SO AT01H424 Year of manufacture: 2002 Load capacity of the rotating device: 30 tons Rotational speed: 0 to 2 m/min Tank diameter: 500 - 7000 mm Roll spacing: 100 to 2500 mm Center distance between rolls: 500 to 2950 mm Roll diameter: 400 mm Roll width: 540 mm Motor power: 2 x 0.55 kW Power connection: 230 volts, 50 Hz - Infinitely variable speed adjustment via SEW frequency inverter - Cable remote control - Right and left rotation - Both roll pairs are driven - Rolls with 4 rubber tires each - Manual adjustment of the roll spacing via trapezoidal screw spindle Hfsdpezin A Ajfx Aa Eei - Rail-mounted chassis with drive, steel cast wheels with smooth roll surface Space requirement L x W x H: 3750 x 2100 x 1200 mm Weight: 3.2 t Good condition

Condition: used, Airless spraying unit WIWA, type WIWA 10.000 Paint spraying unit Year of manufacture approx. 1980 Flow rate approx. 10 L/min Operating pressure approx. 250 bar Hfjdpfx Ajzinzlea Esi Air inlet approx. 6.5 bar - Paint spraying gun WIWA No. 2, type WIWA 500D - Approx. 14.5 m high-pressure hose with paint spraying gun - Compressed air unit with pressure regulator and oiler - Mobile base frame, pump unit with foldable suction pipe Space requirement L x W x H 700 x 700 x 1000 mm Weight 45 kg Good condition

Condition: ready for operation (used), Year of construction: 2012, operating hours: 75,685 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 85 mm, travel distance Z-axis: 280 mm, spindle motor power: 20,000 W, controller manufacturer: SIEMENS, number of axes: 7, This 7-axis Index ABC horizontal turning machine was manufactured in 2012. It features a main spindle with a maximum speed of 6000 rpm and a sub spindle with a speed of 4500 rpm. The machine includes two turrets, each equipped with X and Z axes, and a powerful tool drive. If you are looking to get high-quality turning capabilities, consider the Index ABC machine we have for sale. Contact us for further details. • Main spindle: D65, spindle interface AD140, ID83, max speed 6000 rpm; max power 20 kW at 100% duty cycle; C-axis; electronic synchronization between spindles • Sub spindle: 7.5" chuck interface, max speed 4500 rpm • Spindle hours: • S1 – 18914h • S2 – 661h • S3 – 3h • S4 – 29211h • S5 – 2413h • S7 – 1250h • The synchronous spindle was renewed in September 2024 • Chuck: 3-jaw KFN95/3, clamping force 480 daN, max 4000 rpm • Turrets: two turrets each with X and Z axis; tool drive on turret 6000 rpm, 3.3 kW • Rear working attachment: without quill, 5 quill positions • Coolant: 80 l/min at 8 bar and 20 l/min at 18 bar; system prepared for emulsion; coolant return at spindle end D60 (without bar feed) • Control: INDEX C200-4D based on Siemens 840D; color display 26 cm; thread cutting without compensating chuck; motor-current-based tool monitoring; internal tool management and setup dialog; extended machining cycles; parts counter and production monitoring • Power/connection data: 400 V, 50 Hz TN network; total connected load 45 kVA; rated power 38 kW; rated current 65 A; max fuse protection 100 A • Hydraulic hollow clamping cylinder D65 Hfodpfxjzim Ecs Aa Esi Additional equipment • Chip conveyor: hinged belt, discharge height 1250 mm • Bar feeder: MBL 65/3700 for spindle height 1010 mm; bar diameters up to 65 mm; bar feeder length 3700 mm; guide channel system with rolling bearings; loading rods (Ø12 mm and Ø20 mm, length 1400 mm); guide sets for 14–18 mm, 18–22 mm, 22–65 mm • Workpiece unloading device for main and sub spindle with part catcher • Teleservice preparation (ISDN) with software • Machine prepared for extraction system 230 V • Working area light • Two electrical cabinet cooling units • Transformer 3 kVA Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Forkardt 2-Jaw Chuck 1629034, Double-Jaw Chuck, Ø 160mm Index G200 Adapter, Ø140mm ZWS140-K5 Index G200 Used, as shown in the pictures, in excellent condition From warehouse stock (may have storage marks) Please refer to the pictures for further technical information. Scope of delivery as shown in the pictures. With invoice. The invoice will be enclosed with the shipment. Hsdpozk Iy Rsfx Aa Eofi

Condition: excellent (used), Weiss Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This equipment tests the ingress of water into housings. In conjunction with a timer, the test cycle can be automated for an adjustable test duration from 3 seconds up to 30 hours. According to DIN VDE 0470 T1 and EN 60529 for testing protection ratings IPX3 and IPX4. Thanks to the integrated recirculation system, water consumption can be minimized. Features: - Glass door with wiper - Pneumatic drive for the oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Swivel and exchangeable nozzle holders - Adjustable and monitored water flow rate - Test duration control Mechanical Load Data: - Max. load with test object (evenly distributed over area) - Permissible test load weight for carrying rack (total): 25 kg - Spray radius: 200 mm / 400 mm Test Data for IP Protection Ratings: - Oscillation speed: approx. 60°/s - Oscillation angle for IPX3: approx. ±60° - Oscillation angle for IPX4: approx. ±180° to -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating Data: - Voltage: 3/N/PE AC 400V ±10% 50 Hz Hfjdpfxszil T Es Aa Eei - Rated power: 1.5 kW - Rated current: 5.0 A - Weight: 375 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: used, Rotating Device Gunter Seibold Rotating Device for HTS Coils – Steplessly Adjustable Drive (Type S05082) Description: Professional rotating device designed for accommodating and rotating HTS coils with a winding core. Developed to ensure even distribution of two-component resin during the curing process. Ideal for development, laboratory, or manufacturing environments working with high-temperature superconductor coils. The winding form is electrically heated, with power supplied directly to the form (not included in the scope of delivery). The machine stands out for its precise control, user-friendly operation, and maintenance-friendly design. Technical Features Solid Machine Base: Welded square tube construction with leveling screws and floor anchors Drive: Three-phase planetary gear motor (11 kW, 400 V, 50 Hz, 3 phases) Steplessly adjustable speed (0.2 – 100 min⁻¹) Soft-start & soft-stop via frequency inverter (4-quadrant controller) Electromagnetic spring-applied brake (safe stop in case of power failure) Hfodpszil R Refx Aa Eji Selectable clockwise/counterclockwise rotation Control Panel: 5.7" touch panel for configuring speed, direction, ramps, time, or total rotations Emergency stop button, ergonomically integrated 2 programmable analog inputs Electrics & Control Cabinet: Control system integrated in the machine base 400 V / 230 V supply, 24 V DC control voltage Circuit breakers, RCD 30 mA Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Control cabinet with climate control unit Complete grounding & static discharge of the main shaft Adjustable workplace lamp, tiltable and height-adjustable Specifications Feature / Value Max. coil diameter: 1,500 mm Coil passage: 1,700 mm Center height above floor: 1,100 mm Max. load on faceplate: 500 kg Faceplate Ø 600 mm, 4 T-slots (DIN 650) Speed range: 0.2 – 100 min⁻¹ (stepless) Torque: 775 – 539 Nm Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Connected load: 11 kW Connection current: 32 A Color scheme (according to RAL): Base machine: Blue (RAL 5010) Moving parts: Yellow (RAL 1021) Control panel / cabinet: Light grey (RAL 7035 / 5010) Weight: approx. 1,800–2,000 kg Condition: used Scope of delivery: (see picture) (Subject to change and error in the technical data and information!) We are happy to answer further questions for you by phone.

Condition: like new (used), STARK Profiling Tool Set Hfsdpfxow Tlrkj Aa Eei 119 pieces, new, some in original packaging Article number: JA_G250801 Description / Parts List 82451 8x 94011 6x 600130 10x 62061 9x 37911 6x 108611 3x 108511 3x 108581 6x 98671 4x 108601 6x 53421 2x 600604 1x 600601 2x 600607 16x 600608 4x 600706 7x 602029 4x 602062 2x 602063 3x 8602034 2x 8602035 2x 8602036 2x 8602037 2x 8602038 2x 8602039 2x 6002.06 5 Note: Used item: • Prices are quoted as pick-up prices (unless otherwise specified!) from our location in Ottendorf-Okrilla/Germany – free loading! (unless otherwise specified) • Subject to prior sale! • You will receive an invoice with VAT (value-added tax) shown. • All items are sold as seen, without any warranty claims. The buyer is free to inspect the items at our location. • Our general terms and conditions apply. • Special agreements are only possible in writing. • Items that may be visible in the background of the image are not included in the scope of delivery. • Saw blades are only for illustrative purposes and are not included in the scope of delivery. Shipping options: • We will gladly provide you with a transport quote. • Pick-up from our location in Ottendorf-Okrilla is possible after consultation and is free of charge. (Assembly and instruction of the machine for demonstration purposes is optional and can be arranged!) • Delivery is partially disassembled. • Our trained service personnel can optionally assemble the machine at your location and provide you with a brief instruction. Travel, transport and service costs will be charged extra.

Condition: excellent (used), Mitutoyo Model: QV-L404Z1L-D Item Description: For sale is a CNC vision measuring machine from the renowned manufacturer MITUTOYO. This is the Quick Vision Active 404 model. The device is ideal for precise optical measurements in production, quality assurance, and research. Technical Data: Brand / Type: Mitutoyo QV-L404Z1L-D (Quick Vision Active 404) Measuring range (X / Y / Z): 400 × 400 × 200 mm Camera: CMOS color camera Software: Mitutoyo QVPAK QVPAK (R) Version: 13.301.0075 Optics: Zoom lens, LED illumination system Worktable: High-precision glass stage Equipment: Control PC with QVPAK measuring software 2 × 22" TFT monitors Keyboard & mouse Control panel Swivel office chair for comfortable operation Scope of delivery: Mitutoyo Quick Vision Active 404 measuring device Control PC with QVPAK 2× TFT monitors (22") Keyboard, mouse Control panel Swivel office chair Condition: used Scope of delivery: (see image) (Specifications and technical data are subject to change and errors reserved!) Hsdpfx Aszii Duoa Eofi Further questions can gladly be answered by phone.

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm Hfjdszii Akepfx Aa Eji - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: excellent (used), White Type: SC/KWT 450 Salt Spray Chamber Technical Specifications: Test chamber capacity: 450 liters Max. load: 100 kg Brine storage tank: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Areas of application: Corrosion tests: Salt spray test: Room temperature up to +50°C Hfedpfx Ajziiy Nja Eei Condensation test: Room temperature Up to +45°C Humidifier +75°C Temperature stability The temperature deviation over time is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power 2.0 kW, Rated current 8.7 A Combination: Salt spray test SS: DIN 50021 Condensation test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Weiss Type: SC/KWT 450 Salt Spray Chamber Technical Data: Test chamber volume: 450 liters Maximum load: 100 kg Brine reservoir: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Applications: Corrosion tests: Salt spray test: Ambient temperature up to +50°C Condensation water test: Ambient temperature up to +45°C Humidifier +75°C Temperature stability The temporal temperature deviation is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Standard climate (ventilation): DIN 50014 Weight: 180 kg Condition: used Scope of delivery: (See picture) (Subject to technical modifications and errors! All provided data are subject to change!) Hfsdpfx Ajziixfea Esi For further questions, please feel free to contact us by phone.

Condition: ready for operation (used), 3x diamond cutting discs (individual sale possible) Hsdpfozkwkfex Aa Eofi

Condition: ready for operation (used),