Used Hydraulic Straightening Press for sale (26,026)

Condition: new, Year of construction: 2024, pressure 60 t stroke 400 mm table surface area 800 x 500 mm feed down 4,03 mm/sec feed up 5,82 mm/sec column daylight 820 mm oil pressure max. in the work cylinder 400 bar oil volume 26 l Hedpfx Aasvcrmvohjp voltage 400 V / 50 Hz total power requirement 3 kW weight of the machine ca. 0,55 t dimensions of the machine ca. 1,5 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • Pressure cylinder moveable horizontally, • Working table hydraulical adjustable, • Cylinder Ø 150 mm, piston base Ø 85 mm.

Condition: new, Year of construction: 2024, feed under pressure 2,7 mm/sec pressure 100 t stroke 400 mm table surface area 920 x 560 mm feed down 4,25 mm/sec feed up 8,22 mm/sec oil pressure max. in the work cylinder 385 bar oil volume 26 l diameter of piston 125 mm column daylight 920 mm voltage 400 V/ 50 Hz total power requirement 4 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,7 x 0,9 x 2,1 m • unused workshop press, (Demonstration machine) • manual and hydraulical operation, • pressure cylinder horizontally moveable, • table can be hydraulically adjusted in height, Hjdpjvcrm Aofx Aahop • Cylinder Ø 175 mm, piston base Ø 125 mm.

Condition: ready for operation (used), Jenny ERP-25 straightening press Hsdpfx Aezfx Iujahsp Technical data: 25 tons of straightening force, ram stroke 150 mm Series 86.545 Weight 1,300 kg Note: Fully functional, including straightening unit for shafts.

Condition: used, Year of construction: 1996, Technical details: pressure: 6,3 t throat: 170/180 mm stroke: 310 mm power capacity: 3 kW dayligth: 775 mm weight of the machine ca.: 1,5 t Hodpfxotxdmws Aahep clamping table: 470 x 330 mm table height over floor: 800 mm C-Type 1 Station *

Condition: good (used), Year of construction: 1971, pressing force: 630 t, Manufacturer: Sack & Kiesselbach Model: EP 630 Mode of operation: oil-hydraulic Hjdpfxowxw Amo Aahjp Table height: 1175 mm Stroke: 305 mm Tool installation height: 317 mm Rapid approach descending speed: 6.9 mm/s Pressing speed: 0.3 mm/s Return speed: 6.3 mm/s Drive power: 11 kW Electrics: 550 V / 60 Hz Information without guarantee.

Condition: used, Year of construction: 1952, Type of machine: Down-stroking press Manufacturer: SACK&KIESSELBACH Model: EP500 Year of construction: 1952 Hsdpfswxw H Eox Aahjp Pressing force: 500 t Clear gap: 450 mm Location: In Germany

Condition: good (used), 1 used single-sided press Make: SACK & KIESSELBACH, Hedpeul U Svefx Aahjp year of construction: 1962,74 serial number 31900 Pressing force 630 t, stroke 310 mm Installation height 320 mm Working height 1200 mm Drive power 10 KW

Condition: new, The scope of delivery includes: 1x Top tool, new Tool system: UKB system Trumpf / Wila / LVD with Simple Clamp Type: 15320-500 (15320X) Angle: 28° Radius: R 1.0 mm Length: 500 mm Width: 24 mm Height: 120 mm Load capacity: 800 kN/m max. Material: 42 CrMo4 Weight: ≈ 10 kg Internal reference: DE-KW23-26-03 Explanation: The tool is used in bending presses (also known as die-bending presses) for industrial sheet metal processing. The standardized tool holder, "Simple Clamp safety button," allows the operator to install and remove the segment vertically at any desired point of the press clamping mechanism. Hsdpfozcuqbox Aahop Note: This tool is being sold as part of a customer return (purchase date: April 2026) and is therefore offered at a reduced price. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: excellent (used), functionality: fully functional, Shelf length – 120 cm Shelf width – 45 cm 3 hydraulic cylinders, each with a diameter of 140 mm Ground clearance – 38 cm Hsdpfjzfgptox Aahop Pump motor power – 3 kW Electric heating – 2 x 9 kW Overall length – 180 cm Overall width – 80 cm Height – 215 cm Weight – 2600 kg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Shelf length: 3000 mm Shelf width: 1300 mm 6 hydraulic cylinders, 75 mm Clearance: 400 mm Water heating Year of manufacture: 2001 Hodpfx Aozfgarjahjp Weight: 3200 kg Overall length: 440 cm Overall width: 190 cm

Condition: new, Sicmi PSV 70 M - Hydraulic workshop press with a servomechanical handwheel for cylinder adjustment The PSV model is particularly suitable for sheet metal straightening, inserting bushings, or sheet metal inserts. The lowering and raising of the cylinder is controlled by a handwheel with a servomechanism, which allows for adjustment of the cylinder position to within hundredths of a millimeter, thus ensuring absolute precision. The cylinder stroke is 350 mm and exerts a maximum pressure of 270 bar. Since the approach speed of the cylinder is 10 mm/s or less, the operator can operate the electro-hydraulic press with only one hand. The platform is mobile, and its vertical movement is achieved using the main cylinder, which simplifies sheet metal processing and pressing operations. The hydraulic workshop press with a servomechanical handwheel is also available in a version with a transverse cylinder, which allows for transverse movement of the main cylinder using a handwheel. This solution therefore allows you to always work in the center of the cylinder axis, avoiding processes that could damage the hydraulic press. Correct positioning and locking of the cylinder in the desired position is ensured by a specially designed system. The frame of the PSV hydraulic workshop press is made of an extremely rigid, electro-welded steel construction, which has been specially developed to ensure maximum robustness and stability. Optional equipment: System for preventing cylinder rod torsion Support plates Pair of V-shaped prisms Hsdszcphbspfx Aahjp

Condition: good (used), Description PEM Serter 4, very good condition The machine can process insertion fasteners from all manufacturers up to 53 kN (from M2 to M8 in steel and up to M6 in stainless steel). Quick tool change, ideal for small batch sizes. This machine has an additional manual QX system as special equipment, which enables quick switching between 4 different tools. The QX system is purchased separately as an accessory. The individual price is €2,000. The one-hand operation of this tool allows an operator to install four different types and/or sizes of fasteners with a single setup. The machine includes a laser pointer, stroke counter, and a robust, lockable cabinet for storing tools and accessories. Hsdpfxjzfbu De Aahep Self-collection only, no delivery. If interested, please contact us.

Condition: used, Year of construction: 2001, pressure 70 -800 kN chamfer lenght 2505 mm distance between columns 2125 mm Control OP 2000 controlled axis 7 Hsdpfx Aaeyz Dgwjhop throat 420 mm stroke 200 mm dayligth 470 mm table width 60 mm table height 960 mm ajustment speed 100 mm/sec working feed 10 mm/sec return speed 100 mm/sec weight of the machine ca. 6,3 t Patented Amada technology ensures absolutely correct bending results without bombing device

Year of construction: 1980, operating hours: 7,663 h, condition: used, pressure 320 t throat 800 mm stroke 630 mm distance between table / ram max. 1000 mm ram head dimension 710 x 600 mm Hsdpfx Asd Ih Nroahop table-size 800 x 1200 mm work height max. 1015 mm quantity of oil 1100 l Number of working hours 7663 h weight of the machine ca. 15 t dimensions ca. 1600 x 2200 x 4800 mm dimensions of switch cabinet ca. 1200 x 400 x 1800 mm Tested for function. During the test run it is noticed that the press ram not 100% leak-proof. In addition, the cable for manual operation was mended several times. Upper cover is missing, since this was dismantled by the customer due to crane use. Operating instructions and electrical plans available.

Condition: new, AUTOMATIC DOUBLE SPEED MOTORIZED HYDRAULIC PRESS WITH RAPID POWER 20 TON Max capacity TON 20 Approach speed (in rapid) mm/min 1700 Hedpfervz A Sox Aahsp Working speed (in slow) mm/min 440 Cylinder rod stroke mm 300 Cylinder rod diameter mm 45 Shank diameter mm M14 Tank capacity liters 30 Max pressure bar 350 Voltage V 400 Frequency Hz 50-60 Motor Power kW 1.5 Max absorbed current A 3.8 Weight Kg 200

Condition: reconditioned (used), No. 01 BIGNOZZI 3-cylinder hydraulic press Capacity: 200 tons Completely refurbished Platen size: 1550 x 1050 mm Daylight: 1000 mm Stroke: 500 mm Platen height: 1180 mm Hsdpfx Ashnc R Ijahep Dimensions: 2900 x 1700 x 2900 (h) Weight: 10 tons

Condition: new, Synchronized hydraulic bending press MVD Available in stock, subject to prior sale! Model: I Bend D 4100/320 ESA W660 color video CNC control Number of controlled axes: 7 (Y1-Y2-X-R-Z1-Z2-X5) Motorized WILA back gauge Hjdpofh N Agjfx Aahsp Multi-beam barriers with NEW DSP LASER electronics High-speed motorized rear stop UNIMEC (Made in Italy) GIVI MEASURES optical sensors (Made in Italy) Bending length: 4100 mm Tonnage: 320 tons Throat depth: 510 mm Stroke: 410 mm Opening: 635 mm Includes upper tooling and lower die from ROLLERI

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, AXA ELECTRO-HYDRAULIC PRESS WITH MOVING CYLINDER. Capacity: 150 tons. Dual automatic speed with rapid traverse. Hodpolruhdefx Aahop Special electrical panel with fast/slow switch for one-hand operation. Moving cylinder with 816 mm traverse stroke. Internal daylight from shoulder to shoulder: 1500 mm. Ram stroke: 300 mm. No. 01 AXA PM150/15 ELECTRO-HYDRAULIC PRESS WITH MOVING PISTON – NEW CONDITION “CE” MARKED. -DUAL AUTOMATIC SPEED WITH RAPID TRAVERSE. -COMPLETE WITH A SPECIAL ELECTRICAL PANEL FOR FAST/SLOW SWITCH FOR ONE-HAND OPERATION. -TECHNICAL DATA SHEET ATTACHED. -Applied force: 150 tons -Cylinder stroke: 300 mm -Internal daylight: 1504 mm -Approach speed (rapid traverse): 1450 mm/minute -Working speed (slow): 105 mm/minute -Cylinder ram stroke: 300 mm -Cylinder ram diameter: 110 mm -Stem diameter: M30 -Tank capacity: 50 liters -Max. pressure: 350 bar -Voltage: 400 V, Frequency: 50-60 Hz -Power: 3 kW motor -Max. current consumption: 7.3 A -Weight: 1500 kg GALTECH distributors. • 2MP block. • No. 2 VIVOIL external gear unidirectional pumps. One for rapid approach and return (calibrated at 20 bar), and one with adjustable pressure controlled by a handwheel to set the required power. • Maximum pressure valve with mechanical lock to prevent overpressure. • Standard pressure gauge to display the applied force. • INTECH electrical panel certified according to current regulations and with independent CE marking.

Condition: new, Year of construction: 2025, OMCN 100-ton electro-hydraulic press, Model 164/R Made in Italy DOUBLE-SPEED ELECTRO-HYDRAULIC PRESS AUTOMATIC, COMPLETE WITH PRESSURE GAUGE Hydraulic press with rapid-action motor, pressure gauge, and double-speed hydraulic power unit achieved with a vane pump for rapid approach and return, and with an axial piston pump for the working phase. Equipped with a calibration valve and a three-position control distributor (forward, idle, return). The machine is complete with oil. Supplied with a winch for lifting the worktable. Hjdsfh R Nyepfx Aahjp The ram is made of special steel, treated, and chrome-plated. The machine is equipped with two-hand control and synchronization as per current regulations. Complete with protective panels, rear and side. CE approval, including electromagnetic compatibility. Ram stroke: 310 mm Internal width: 1,010 mm

Condition: new, Year of construction: 2025, OMCN P30/SA hydraulic press with a 2-speed hand pump, 30 tons. OMCN P30/SA hydraulic press with manual operation via a two-speed hand pump and a robust base frame that provides maximum stability and minimal footprint. Thanks to the perforated frame, the support base is height-adjustable in 9 different positions, allowing the press to be adapted for working with parts of various sizes. The winch allows for convenient and quick lifting of the worktable. + faster approach + precision Essential in workshops and in the industrial sector, perfect for pressing metal objects, for example, during the assembly of mechanical components, the fitting of bearings or pulleys onto shafts. Made in Italy and CE certified, this press is manufactured with robust materials that guarantee reliability over time and is capable of generating a force of 30,000 kg. Footprint: 2180 x 1300 x 600 mm Weight: 280 kg Hedpfoklyvtex Aahjp Pressure: 30 tons Distance between uprights: 695 mm Piston stroke: 190 mm Piston diameter: 60 mm

Condition: new, Year of construction: 2025, functionality: fully functional, The motorized hydraulic press P50MR guarantees high performance and maximum precision thanks to its robust structure, entirely laser-cut without welds in the areas of greatest stress. It is equipped with an immersion motor power unit 400 [V] 50-60 [Hz], a rapid approach and return pump calibrated to 20 [bar], plus an adjustable pressure pump with a handwheel to achieve the required power. Hedpfjfvhqgjx Aahsp It is also equipped with a maximum pressure valve with mechanical locking to prevent overpressure, and the pressure gauge (standard) allows for extremely precise calibration of the power output. Power: 50 tons Distance between inner uprights: 800 mm Approach speed: 1800 mm/min Working speed: 350 mm/min Rapid return flow rate: 26 l/min Slow return flow rate: 5 l/min Cylinder stroke: 300 mm Cylinder bore: 135 mm Rod diameter: 70 mm Rod thread diameter: M30 Tank capacity: 50 liters Maximum pressure: 350 bar Voltage: 400 V Frequency: 50-60 Hz Motor power: 3 kW Maximum absorbed current: 5.5 A Weight: 500 kg Dimensions: 1550 x 800 x 1965 (h)

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, input current: 7 A, pressing force: 150 t, stroke length: 300 mm, Equipment: CE marking, documentation/manual, MOTORIZED HYDRAULIC PRESS WITH AUTOMATIC DOUBLE SPEED AND RAPID ADVANCE CAPACITY: 150 TONS The monolithic frame is entirely laser-cut and securely bolted in package form. This characteristic makes all our presses deformation-resistant, even in areas subject to the highest stress. All components are manufactured in Italy. Hydraulic power unit with ICME submerged motor 400 V, 50/60 Hz; cylinders and frames made in Italy. GALTECH monobloc distributor. No. 2 single-direction external gear pumps in aluminium by VIVOIL: one dedicated to fast approach and return (set at 20 bar), and one with pressure adjustable via handwheel to set the required force. Maximum pressure valve with mechanical lock to prevent overpressure. 2 MP CETOP high-range modular block. Standard pressure gauge for displaying delivered power. Hodpfx Aaoy E Rr Iehep INTECH electrical control panel, certified to current standards and independently CE marked. Maximum capacity: 150 tons Rapid approach speed: 1,450 mm/min Working speed (slow): 105 mm/min Cylinder rod stroke: 300 mm Cylinder rod diameter: 110 mm Shaft diameter: M30 Tank capacity: 50 L Maximum pressure: 350 bar Voltage: 400 V Motor power: 3 kW Weight: 1,300 kg

Condition: new, Year of construction: 2024, 110-ton electro-hydraulic press Made in Italy The P110 MR is equipped with: Immersed motor power unit, 400 V, 50-60 Hz. Rapid approach and return pump, calibrated to 20 bar. Adjustable pressure pump with handwheel for achieving the required power. Maximum pressure valve with mechanical lock to prevent overpressure. Manometer (standard) that allows for extremely precise calibration of the delivered power. The P110 MR is the only hydraulic press composed of 2 columns in a monolithic structure made of FE 510 steel, laser-cut without welding in the areas of greatest stress. This feature gives it exceptional robustness. It is non-deformable and guarantees tight working tolerances. The P110 MR is equipped with a 30-liter tank and has a rapid descent speed of 1,400 mm/min. Weight: 1,100 kg Maximum pressure: 350 bar Maximum capacity: 110 tons Rapid flow rate: 34 l/min Slow flow rate: 5 l/min Inner width between columns: 1004 mm Rapid stroke advance: 1,400 mm/min Slow stroke advance: 130 mm/min Voltage: 400 V Frequency: 50-60 Hz Power: 3 kW Hodpjfh R N Dsfx Aahsp Maximum absorbed current: 7.3 A Cylinder stroke: 300 mm Cylinder diameter: 200 mm Rod diameter: 110 mm Piston descent speed: 23 mm/sec Tank capacity: 30 liters

Condition: used, functionality: fully functional, ---IMAL hydraulic press brake, 3000 x 85 tons (red and white), 4 axes, 500 mm throat depth. Dimensions: 400 x 180 x 260 (H) cm, weight 7,000 kg (70 cwt). Hjdpewyndwofx Aahsp

Condition: used, Year of construction: 1987, machine/vehicle number: 10064, functionality: fully functional, operating hours: 90,041 h, input voltage: 380 V, type of input current: three-phase, pressing force: 200 t, stroke length: 300 mm, table width: 800 mm, table length: 1,290 mm, table height: 1,000 mm, ram plate width: 800 mm, ram plate length: 1,300 mm, oil tank capacity: 1,300 l, total length: 2,330 mm, total width: 1,600 mm, total height: 4,150 mm, overall weight: 21,000 kg, control cabinet height: 2,070 mm, control cabinet length: 1,500 mm, control cabinet width: 400 mm, DGUV certified until: 06/2026, die cushion stroke: 70 mm, distance between side stands: 420 mm, installation height: 600 mm, Equipment: safety light barrier, 1x tool safety input Two-hand control panel with emergency stop 8x hydraulic clamps Electrically adjustable depth stop Cut stroke damping Ejector - draw cushion for ram and press table Hjdpfx Aaoyvgrhshop Electronic stroke and pressure measurement system Hydraulic main drive pump completely overhauled with a new drive motor