Used Hydraulic Ring for sale (51,042)

Condition: used, machine/vehicle number: WMM000000V004xxxx, Year of construction: 1997, Please contact ATS Norway for more information Please provide reference number upon request: 19250 Specifications: - 3 axle - Turn on 1 - Hydraulic bridges - Good tires - 10 tonne axles - Ready for delivery Description: Mueller Machine towing from 1997. Trailers need a bit of maintenance against rust and dirt. Chsdpsv U S Rrsfx Ab Tof Hydraulic brakes and good tyres. Ready for delivery. Technical approved: no EU-approved until: 31.01.2018 Own weight: 6100 Total Weight: 30000 Payload: 23900 Width: 252 Length: 1045

Condition: ready for operation (used), Year of construction: 2005, operating hours: 79,600 h, General Data Machine weight 22500 kg Clamping Unit Clamping force 4000 kN Injection Unit Shot weight 1860 g Screw diameter 90 mm This Arburg 820S-4000-3200 was manufactured in 2005. It features a clamping force of 4000 kN, a screw diameter of 90 mm, and a shot weight of 1860 g. The machine operates with a SELOGICA control system and has a total installed power of 96.2 kW. Consider the opportunity to buy this Arburg 820S-4000-3200 hydraulic injection moulding machine. Contact us for further details regarding this machine. Chjdpfoxy Anbsx Ab Tsf Application Types Injection Moulding

Condition: like new (used), Year of construction: 2024, pressing force: 200 t, Main Cylinder Press Capacity: 200 t - Max. working pressure: 285 bar - Cylinder stroke: 1500 mm - Clear width/clear height: 1500 mm - Distance between columns: 2050 mm - Max. lateral cylinder displacement: 1450 mm - Max. longitudinal frame displacement: 2800 mm - Table plate dimensions: 4000 x 2000 mm - Hydraulic power unit output: 5.5 kW - Approach speed: 20 mm/s - Working speed: 2 mm/s - Hydraulic oil not included in delivery - Hydraulic power units are mounted on top of the press - Hydraulic block and valves by Rexroth - Air filter brand: FILTREC - Oil filter brand: FILTREC - Air and water (cooler) cooling for hydraulics - Stroke cylinder integrated into the working table Rod Diameter: 25 mm - Stroke: 80 mm - Control via cylinder control or hydraulic unit (lever control) - 10 lift cylinders installed - Digital control with position measurement via encoder and pressure measurement with data output - Siemens touchscreen display KTP 900 – 9" for programming (up to 99 programs): - Maximum up and down travel of the cylinder - Pressure holding time at the lower table - Decompression time - Working pressure adjustment - Piece counter - Pre-stop traverse with 0.1 mm accuracy - Alarm management - Frame-mounted display for real-time process parameters - Wireless remote control with two buttons for simultaneous operation - Control cabinet with Siemens CPU - Hydraulic unit with solenoid valves (replaces suspended control panel) - Air/oil heat exchanger with decompression valve 5. ELECTRICAL INSTALLATION AND SAFETY - The PLC system is by SIEMENS (S7-1200 series) - Siemens touchscreen LCD (9 inch) MTP900 installed in the control cabinet - Electrical devices from brands SIEMENS, ALLEN BRADLEY, and PHOENIX - System pressure of the pressure cylinder is set via LCD touchscreen - Modes (semi-automatic and automatic), power, vertical stroke, and dwell time of the upper cylinder are programmable - 99 recipes can be saved, with all parameters programmable for each recipe - Activation via wireless control - Features dual push-buttons for slow/fast cylinder travel, emergency stop button, and operation confirmation - Touch-sensitive safety edge at the bottom of the portal columns for safety - Control cabinet mounted on the bridge side wall - Anti-twist lock for the cylinder - Oil temperature displayed on LCD touchscreen - Overheating warning for hydraulic oil shown on LCD touchscreen - Filter contamination status displayed on LCD touchscreen - System errors displayed on LCD touchscreen Cjdoxrb Nbjpfx Ab Tjhf - Press status information displayed on LCD touchscreen - Once oil temperature reaches 45°C, the air cooler starts to lower the oil temperature; machine operation stops above 65°C until it cools to operating temperature - Operating manual included - System meets all essential safety and health requirements as per CE regulations

Condition: used, Roller sets for section bending machine, 3-roll ring bending machine HERKULES WETZLAR Csdpfoglaq Isx Ab Tjhf The rollers fit a section bending machine HERKULES WETZLAR type BO 238 N Shaft diameter: 60 mm with 18 mm keyway 2 rollers set No. 1, roller diameter = 110 mm, roller width = 180 mm 2 rollers set No. 2, roller diameter = 160 mm, roller width = 40 mm 3 rollers set No. 3, roller diameter = 150 mm, for tube diameter Ø 33 mm, roller width 87 / 115 mm - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm without keyway The machine had 2 driven rollers Total weight of all rollers: 57 kg Good condition

Condition: excellent (used), Hydraulic Guillotine Shear (used) Manufacturer: VOLZ Euro-Cut Model: 6.5 x 3050 Year of manufacture: 2002 Max. cutting length: 3050 mm Max. plate thickness (ST 45): 6.5 mm Distance between side frames: 3050 mm Motorized back gauge adjustment: 20 – 1000 mm Cutting angle adjustment: hydraulic Hold-down clamps: 18 pieces Motor power: 11 kW Machine weight: approx. 5100 kg Required space: Width 3830 mm, Depth 2865 mm, Height 1700 mm Foot switch Angle stop Front support arms Motorized back gauge adjustment Cutting edge illumination Chsdpsx Ag Scsfx Ab Tjf The machine is in very well-maintained condition and is immediately ready for operation. Forklift available, free loading onto truck Low-cost shipping available Machine location: 59510 Lippetal

Condition: used, Cincinnati 5FL12 Hydraulic Shear with Elgo Electric P8511 Control Panel DRO, Rear Haul Off Conveyor, Powered Back Gauge, 5/8" Capacity Mild Steel (16m), Bed Width 3800mm. S/No. 33K27 Cedpfx Aox Agibob Tehf Location: These lots are located in Dudley, West Midlands, UK. Unfortunately, there are no loading facilities, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Hydraulic station Chsdjx Affnjpfx Ab Tef Motor power: 10 kW

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,642 h, General Data Measurements width 1810 mm Measurements depth 6950 mm Measurements height 2213 mm Machine weight 15750 kg Injection Unit Screw diameter 45 mm Clamping Unit Clamping force 350 ton Media Internal cooling Yes Additional Equipment Fanuc Robot This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information. Chjdpfxexy Anuo Ab Tef Application Types Injection Moulding

Condition: used, Year of construction: 1981, total height: 2,850 mm, total width: 1,800 mm, total length: 1,100 mm, Empty weight: 6.000 kg - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: 10340 - Control: Conventional - Table width: 550mm - Table length: 630mm Csdpfxoxywkqe Ab Tjhf - Ram width: 500mm - Ram length: 1100mm - Model: Hydraulic - Max. stroke: 160mm - Power: 100.0ton - Transport dimensions: 1100mm x 1800mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), motorized limit stop behind foot switch Technische Daten / technical details: Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Ständerweite / distance between columns 2000 Mm Antriebsleistung / drive capacity 11 kW Gewicht der Maschine / weight 3500 kg Csdpfehtq N Nex Ab Tjhf Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Year of construction: 1997, condition: used, Technical details: pressure: 250 t stroke: ca. 400 mm pass through width: 640 mm table above floor: 900 mm ram stroke speed: regulierbar/adjustable passage between the side columns: 470 mm table clamping surface LxW: 570x550 mm clamping area of ram: 570x550 mm total power requirement: 56 kW weight of the machine ca.: ca. 9,0 t dimension machine xH: 2,5x1,8x3,8 m transport dimensions LxWxH: 2,6x1,8x3,1 m - control manual and via automatic via SPS Allen Bradley - one hand and two hand control Csdpfxju Nfn Rs Ab Tjhf - ram guidance column, zero backlash - set up mode and automatic mode via SPS controlled - light curtain type "Sick" and safety curtains installed - no CE certification available i.D. *

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Chjdpfx Ajhfwqzeb Tef Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: used, Hydraulic station Chsdpfox Ad Egsx Ab Tsf Motor power: 11 kW

Year of construction: 2007, condition: ready for operation (used), This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking to get high-quality injection molding capabilities, consider the Arburg 420A 1000-400 machine we have for sale. Contact us for more information about this machine. Cjdoxy An Iopfx Ab Tshf Application Types Injection Moulding

Condition: used, machine/vehicle number: WFDFLT3305100xxxx, Year of construction: 2005, Please contact ATS Norway for more information Please provide reference number upon request: 21651 Specifications: Chjdpfsxq Dc Ujx Ab Tof 2005 model Tires (see pictures) Spring ring: steel spring ring Shift brakes Hydraulic driving bridge Lashing parties Ready for delivery Description: We have a 2005 Damm 3-axle machine trailer w/ hydraulic axles for sale. The machine trailer is EU-approved and functions as it should, according to the owner. Cosmetic damage may be present as it is from 2005. Ready for delivery Technical approved: Yes EU-approved until: 15.07.2026 Own weight: 6680 Model: 3 akslet maskinhenger m/ hydrauliske kjørebroer

Condition: used, Year of construction: 2008, operating hours: 15,498 h, 2008 | Sennebogen 850R with hydraulic rotating grapple | Used Material Handling Excavator | 15498 hours 📍Location: France, Revel 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 165000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Chsdpfxoxyvg Dj Ab Tjf 👷‍♂️ Inspected by an independent expert 57 inspection points 47 approved ✅ 9 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Machine is operational with normal wear for 15,000 hours, some minor oil leaks. Turret brake needs inspection. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "32948 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2005, pressure 25 t stroke 145 mm daylight between the columns 600 x 160 mm weight of the machine ca. 0,15 t dimensions of the machine ca. 0,8 x 0,6 x 1,8 m Chodpfx Aoxz Sbyob Tjf Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - 2 press documents

Condition: new, New hydraulic high speed press from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Cedpfof Rt Irox Ab Tjhf

Condition: used, Hydraulic station Codpjx Adm Defx Ab Tjhf Motor power: 15 kW

Condition: good (used), mileage: 499,000 km, power: 397 kW (539.77 HP), first registration: 03/2021, fuel type: diesel, wheelbase: 3,200 mm, fuel: diesel, fuel tank capacity: 500 l, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: AdBlue, = Additional options and accessories = - Tipping hydraulics - Power take-off (PTO) = Further information = Transmission: I-SHIFT, automatic Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 9,602 kg Payload: 19,398 kg gross vehicle weight (GVW): 29,000 kg Body brand: VOLVO Technical condition: good Visual condition: good VOLVO FH 540 6X4 Tractor Unit EURO 6 L PACKAGE 460 HP DRIVE 6X4 AIR SUSPENSION WHEELBASE 320 CM FH CABIN OPTIONS: -AIR CONDITIONING (CLIMA) -NAVIGATION -FRIDGE I-SHIFT AUTOMATIC TRANSMISSION LED HYDRAULIC CONNECTIONS LARGE FUEL TANK 500 LITERS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL Cjdpfx Ajxz Rvcob Tohf WE SPEAK ENGLISH

Condition: used, machine/vehicle number: F1BA0xxxx, Year of construction: 2021, operating hours: 272 h, fuel type: diesel, Please contact ATS Norway for more information Please provide reference number upon request: 21549 Specifications: Chjdpfexpdmkox Ab Tef 2021 model 272 hours 85 kW 14500 kg Lifting capacity of 12000 kg Lifting height: 3000 mm Hydraulic forks Side shift Tires (see pictures) Radio Light Air conditioning/ac Ready for delivery     Description: We have a 021 Hangcha CPCD120 Forklift w/ hydraulic forks, side shift and low hours for sale. The truck is like new and has few hours. Everything works as it should and services have been taken care of. Ready for delivery Hours: 272 Own weight: 14500 Lifting heigth: 3000 Lifting capacity: 12000 Kw: 87 Model: CPCD120 Gaffeltruck m/ hydrauliske gafler, sideforskyvning og lite timer

Condition: new, CNC Hydraulic guillotine shear New machine Manufacturer:UMS Type : PRO. 3100 x 13 CNC Technical data: Cutting length 3100 mm Csdpfjnl D Tfox Ab Tehf sheet thickness (42 kgf/mm) 13 mm sheet thickness (70 kgf/mm) 8 mm cutting angle: 0,5 - 3 mm 15 pcs. blank holder Cybelec Cybtouch 8 monoblock: steel welded construction Automatic cutting gap adjustment Table with ball rollers High quality, hardened and ground upper and lower knives Light sensor for front side (sheet guide) Adjustable cutting stroke 1 m support arm with scale 1 m support arms ( 2 pieces ) Rear light sensor ( 10-16 mm sensor distance) Cutting line illumination Motor 30 kW throat 180 mm Cutting speed 7/13 Original Rexroth valves Rexroth hydraulic system Rexroth pump, original Eckerle Electrical parts from Siemens Operating instructions German Table height 900 mm Overall dimensions 3840x2830x2180 (WxLxH) Total weight 11.000 kg plus commissioning, training and transport Delivery time from order approx. 70 days

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Chedehtaaqspfx Ab Tof Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: used, Hydraulic station Chjdex Adbbspfx Ab Tjf Motor power 11 kW

Condition: good (used), Year of construction: 1991, 1 piece Hydr. hole punch MUBEA type HP 1000 / 760. Year of manufacture 1991 Punching force 100 tons With punching saddle for K 60-K260 and various tools, manually operated linear punching unit (raster rail 4 m) swiveling and digital display, carriage clamping and foot switch Dimensions L x W X H 1930 x 780 x 1980 mm Projection 760 mm Working height 1135 mm Hole 40 in 22 mm Stroke 0 - 70 strokes Number of strokes at full stroke 11 strokes Cjdpfxotv Hzvs Ab Tohf Drive power 8.5 kW Weight 3800 kg 3600 kg Used, ready for operation