Used Hydraulic Press Brake for sale (39,277)

Condition: good (used), functionality: fully functional, control type: CNC control, actuation type: hydraulic, controller manufacturer: Delem, controller model: DA65, bending force (max.): 300 t, working width: 4,300 mm, stroke length: 300 mm, throat depth: 450 mm, distance between stands: 3,700 mm, number of axes: 4, type of crowning: CNC-controlled, number of support arms: 2, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Podpfoydpxvox Ah Hegg Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: good (used), Year of construction: 2012, Condition: 2012 overhauled to the latest UVV Installation height: 800 mm Ram stroke: 500 mm Pgodpfx Aoydlx Ssh Hog Projection: 360 mm Nominal force: 400 kN Hydraulic pressure: 160 bar Operating hours: 1356 Other: new control from Pilz, electrical circuit diagrams available Video about functionality available

Condition: good (used), Maximum pressing force 10 tons. Working pressure 16 MPa Cylinder stroke 400 mm Down speed 100mm/sec Speed up to 450 mm/sec Power requirement 5.2 kW Weight 1.3 tons Pjdjydlvkopfx Ah Hjgg Clamping table changed! Not an original table!

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Safety distance: 100mm Post-travel: max. 10 mm Psdpsydlutofx Ah Hogg Motor power: 3 kW

Year of construction: 1974, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 22258 Specifications: Pjdpfx Ahsydhv Hs Hjgg 1974 model Hour meter is not accurate Used for bending steel plates Fully operational, but has a small leak on one cylinder Ready for delivery

Condition: like new (used), Year of construction: 2007, machine/vehicle number: 31652, pressing force: 80 t, Year 2007 Serial 31652 6 Axis Laser safe Upper attachment Wila hydraulic Pgodpfx Ahovcc Eij Hjg Lower attachment LVD hydraulic Software : CADMAN-B

Condition: ready for operation (used), Year of construction: 1991, Press force: 60 t Max. working width: 2550 mm Pgodpsyda Uzofx Ah Hog Clear distance between uprights: 2550 mm For sheets (at full working width) up to: Throat depth: 250 mm Bending speed: 75 mm/s Return speed: 95 mm/s Backgauge adjustment: 500 mm Hydraulic drive: 380 V, 4 kW Space required: 2920 x 1350 x 2250 mm Weight: 4.7 t Control: CYBELEC

Condition: used, This unicraft hydraulic workshop press, model: WPP 50 E, is being auctioned online in our industrial auction / machinery auction for the closure of Hofer Getriebetechnik – workshop equipment, lifting platforms, tools, machines, forklifts, office furniture, metal cabinets. You will find this and many other items on our platform. Pgjdpfx Asydaqceh Hog

Condition: used, Year of construction: 1991, machine/vehicle number: 041-024/39, Press capacity: 63 ton Throat depth: 360 mm Stroke: 500 mm Daylight: 800 mm Table surface area : 750 x 560 mm Slide area: 630 x 400 Working speed: 60 mm / sec Psdpfxevai R To Ah Hsgg Return speed: 380 mm / sec Electrical connected load: 12,6 kW Dimensions L x W x H: 1.200 x 1.950 x 3080 mm Weight of machine approx.: 4,3 ton

Condition: repair required (used), Hydraulic press machine 6t, HARE 6 HP, 6 Tons, Used machine Manufacturer: Hare Type: 6 HP The pneumatic valves are incomplete Overall dimensions: Pgsdsyc Syaspfx Ah Heg Width: 1120 mm Depth: 1150 mm Height: 1940 mm Table size: 250 x 140 mm Stroke length: 100 mm Throughput: 440 x 80 mm Working pressure: 6.1 tons (60 KN) Year of manufacture: 2006 Electrical data: 400V; 3kW; Air pressure: 5.5 bar Weight: 620 kg

Condition: good (used), functionality: fully functional, Year of construction: 1998, working width: 2,000 mm, pressing force: 35 t, pressure 35to max. bending length 2000mm arrester behind drive capacity 4,5 kW Psdpfx Ahewagyko Hsgg weight 3000kg

Condition: good (used), functionality: fully functional, Year of construction: 2011, control type: CNC control, bending force (max.): 66 t, working width: 2,040 mm, stroke length: 200 mm, distance between stands: 2,364 mm, Delem CNC control controlled arrester 1 set upper and below tools at 2m length Technische Daten / technical details: Pgjdpfsx Tgmksx Ah Hog Druck / pressure 66 to Abkantlänge / bending length 2040 mm Durchgang zwischen den Ständern / distance between columns 2364 mm Hub (Y-Achse) / stroke (Y-axis) 200 mm Verfahrweg X-Achse / travel of X-axis 600 mm Verfahrweg R-Achse / travel of R-axis 150 mm Gewicht / weight 5700 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 1998, Year of manufacture: 1998 Model: HÄMMERLE BM 200 - 4100 Catalog number: 11803-37 Serial number: 590 097 Pressure: 2000 kN Working length: 4100 mm Max. stroke: 400 mm Reach: 250 mm Weight: 18,900 kg + Tools Pjdjwn Hfijpfx Ah Hjgg

Condition: excellent (used), Year of manufacture: 2005 Serial number: 8293 Press force: 120 t Bending length: 3100 mm Max. stroke: 260 mm Operating pressure: 240 bar Motor power: 11 kW Power supply: 400 V / 50 Hz / 3 phases Machine weight: 7,500 kg Machine dimensions (L x W x H): 3550 x 1800 x 2800 mm Pjdpfexna S Hsx Ah Hjgg

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 800 kN Stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Control: Delem DA-65R The machine starts, but the control does not respond to commands. The previous user replaced the original AMADA control with a DELEM unit. Psdpfx Ahewq Dpqj Hogg

Condition: good (used), functionality: fully functional, Year of construction: 2008, Expected in approx. 2 months, used 4-meter CNC press brake from Safan Model: H Brake 170 4100 Capacity: 4100 x 170 tons TS1 CNC control Y1, Y2, X, R, Z1 and Z2 CNC controlled CNC crowning Pjdpfjycv Uuox Ah Hogg Wila hydraulic upper clamping 1 set of tooling

Condition: used, functionality: fully functional, Year of construction: 1969, Used press brake Capacity: 3500 x 120 tons Adjustable back gauge Weight: 12 tons Pjdpsycv Tkefx Ah Hogg

Condition: good (used), functionality: fully functional, Year of construction: 2007, Used 3 meter CNC press brake from Boschert Model: SPB 3105 Sonder Capacity: 3100 x 105 tons Psdpfxjycv Rio Ah Hogg Delem DA66w graphical CNC control Y1, Y2, X, and R axes CNC crowning Hydraulic Wila upper clamping Adjustable lower table Year of manufacture: 2007 Automatic AKAS Fiessler laser safety system

Condition: good (used), functionality: fully functional, Year of construction: 2011, Used CNC press brake from Safan Model: E Brake 100 3100 Capacity: 3100 x 100 tons E Control CNC controller (latest software) with additional screen Y1, Y2, X, R, Z1 and Z2 CNC-controlled axes Hydraulic WILA upper clamping Psdpfx Ahoycv Ets Hsgg Year of manufacture: 2011

Condition: good (used), Year of construction: 1990, total height: 7,200 mm, total width: 4,200 mm, total length: 14,500 mm, throat depth: 700 mm, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Pgedpfxoyfmnws Ah Hog Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: good (used), Year of construction: 1988, table width: 900 mm, Pressure: 160 t Stroke: 500 mm Table size: 900 x 630 mm Floor clearance: 800 mm Downward speed: 200 mm/sec Upward speed: 125 mm/sec Podpfx Ahoyfmlvo Hsgg Total power requirement: 17 kW Machine weight approx.: 7 t

Condition: good (used), Year of construction: 1994, throat depth: 360 mm, table width: 630 mm, table length: 1,250 mm, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Pedjyfmlcepfx Ah Hogg Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: as good as new (ex-display), The AHK M 1230 NC is a robust press brake from the renowned KNUTH brand, designed as a modern, cost-effective alternative to traditional CNC press brakes. This versatile machine is well-suited for operators who prefer working without complex CNC programming, featuring a user-friendly touchscreen interface for direct positioning of the back gauge along the X and R axes. The machine's high-precision steel construction and hydraulic design ensure excellent rigidity and durability, accommodating intricate bending sequences. With a pressure force of 30 tons and a bending length of 1,250 mm, it is ideal for processing various materials and contours. Noteworthy standard equipment includes the Weintek 7'' NC control, motorized back gauge, and light curtains, which enhance both safety and productivity. You can confidently order this reliable press brake online to elevate your sheet metal processing capabilities. Pgjdpomf Tilefx Ah Hog

Condition: used, Year of construction: 2012, operating hours: 25,000 h, total length: 5,250 mm, total width: 2,350 mm, total height: 2,750 mm, Weight: 12.500 kg Price: On request - Year: 2012 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 7336127126 - Operating hours: 25000 - Drive system: CNC - Control system brand: Cybelec - Control system type: DNC-880S - Power [kW]: 18.5 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 175 - Max. working width [mm]: 4050 - Column gap [mm]: 3600 Pgodpjwmf Efefx Ah Hjg - Max. stroke [mm]: 255 - Control type: DNC 880S - Control: CNC - Transport dimensions: 5250mm x 2350mm x 2750mm (l x w x h) - Transport weight [kg]: 12500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2017, operating hours: 4,303 h, total length: 4,200 mm, total width: 2,300 mm, total height: 2,970 mm, Weight: 10.000 kg Price: On request Delem DA69T: 3-D control Gestuurde assen: Y1, Y2, X, R, Z1, Z2 + Crowning Pjdswrmwyopfx Ah Hsgg Extra finger Quick-release clamping Including tooling - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 24463 - Operating hours: 4303 - Drive system: CNC - Control system brand: Delem - Control system type: DA-69T - Power [kW]: 18.5 - Number of axes [pcs]: 6: Y1+Y2+X+R+Z1+Z2 - Press force [ton]: 200 - Max. working width [mm]: 3100 - Column gap [mm]: 2550 - Throat depth [mm]: 500 - Backgauge depth [mm]: 800 - Max. stroke [mm]: 350 - Control type: Delem DA-69T - Control: CNC - Transport dimensions: 4200mm x 2300mm x 2970mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum