Used Hydraulic Part for sale (14,916)

Condition: ready for operation (used), Year of construction: 2013, General Data Measurements height 470 mm Dimensions Machine Length 470 mm Clamping Unit Clamping force 1100 kN Fgjdpfx Aox D Ea Ueb Tjk This Krauss Maffei 110-380 CX was manufactured in 2013. It features a clamping force of 1100 kN, mold opening force of 70.0 kN, and a mold opening stroke of up to 600 mm. The machine includes a robot and has internal dimensions of 470 x 470 mm. Consider the opportunity to buy this Krauss Maffei 110-380 CX hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump, universal unit Fgodpov Auxujfx Ab Tjk -Manufacturer: Orsta, universal unit -Engine: 2.2 kW/1410 rpm -Nominal pressure max.: 160 bar -Liter output: 2.5 l/min -Hydraulic tank/filter/valves: see pictures -Dimensions: 750/380/H620 mm -Weight: 110 kg

Condition: good (used), Karl Tranklein ZP Combi hydraulic bookbinding press The device is ready to work. The press has a built-in hydraulic unit. Two independent stations. A single station surface: 325x440mm Irreplaceable in the bookbinding shop when producing books, blocks, etc. The machine is equipped with photocells, additional safety features. Fjdpfx Abswxtd Te Tegk

Condition: used, Year of construction: 2004, operating hours: 5,913 h, machine/vehicle number: 03104313, fuel type: diesel, Weights Fjdpfx Asx Dqpujb Tegk Empty weight: 15.500 kg Functional Mast: articulated arm Lifting capacity: 1.000 kg Working height: 2.300 cm Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: - Max. horizontal reach: 0 m Transport dimensions (LxWxH): 5.75x2.5x3.2 Additional information Please contact PFEIFER GROUP for more information

Year of construction: 2000, condition: good (used), Hydraulic machine vice Fgsdpfx Ajhcipksb Tek Make BUSCH Type:V2 HY 94.

Condition: used, Year of construction: 1985, pressure 40 t stroke 500 mm throat 360 mm dayligth 1000 mm table surface area 630 x 500 mm table height over floor 1060 / 720 mm Fjdpfx Abovzxrpj Togk ram surface 450 x 360 mm feed down 60 mm/s feed up 300 mm/s power requirement 7,5 kW Weight 2,75 t dimensions of the machine ca. 1,0 x 1,8 x 3,05 mxmxm hole in the table 200 mm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive, intermediate plate (height 340 mm) as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: ready for operation (used), Year of construction: 2003, operating hours: 72,069 h, Injection Unit Screw diameter 90 mm Clamping Unit Clamping force 5500 kN Fgjdpfx Ajx D Eblob Tsk This Engel CL 4550/550 was manufactured in 2003. It features a screw diameter of 90mm, a closing force of 5500kN, and an opening distance of 700mm. Mold installation height ranges from 250mm to 850mm, and the plant size is 1200x1200mm. Includes a robot but excludes water temperature control equipment and conveyor belt. Contact us for more information about this machine. Application Types Injection Moulding

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, hydraulic buffers, pressure boosting cylinders -Hydraulic cylinder: from Fischer DHS 12/3000 guillotine shears -Piston rod: Ø 140 mm Fgodpfxjgxcube Ab Tjk -Stroke: 170 mm -Number: 2x cylinders available, 1x left / 1x right -Price per piece -Dimensions .: 270/270 / H565 mm -Weight: 326 kg / pc.

Condition: good (used), Ideal 7260 Hydraulic Paper Guillotine Machine in very good condition, ready for production. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine has a 721 mm knife length and is equipped with infrared safety curtains, a hydraulic hold-down device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable program with 99 steps each, electronic saddle position reading with 1/10 mm accuracy, and a self-diagnostic system with error messages displayed on the screen. The machine’s main work table is made of stainless steel and has a blower. A paper ejection function is included for ease of use. Technical data: Cutting length 721 mm Infeed height 80 mm Infeed depth 720 mm Front table depth 530 mm Minimum final offcut 20 mm Minimum final offcut with beam guard in place 90 mm Power supply 400 V / 50 Hz 1.5 kW Weight 588 kg Dimensions 1335 x 1305 x 1540 mm Key features: Electromechanical knife drive, Hydraulic clamp, Fgjdpfjxmvaqjx Ab Tok Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator (Laser), Air table (on front and rear tables), Pedal for pre-marking the cutting line, Front table made of chrome-nickel steel, Blade made of high-quality HSS steel, Safety features ensured by: safety curtains – photocells transparent safety cover on the rear table safe drive – IDEAL patent two-handed, electronically controlled cutting start automatic knife return from any position main switch equipped with a key switch knife replacement possible with the blade permanently covered

Condition: used, Empty weight: 1.000 kg Dimensions (LxBxH): 176 x 77 x 183 cm - Documentation available: No - CE certificate present: No - Transport dimensions: 1760mm x 770mm x 1830mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Fodsx Dkiuspfx Ab Tsgk

Year of construction: 2001, condition: good (used), Hydraulic punching machine Fgsdpfx Abeqwg Acs Tjk Fabr.EDEL Type: POWERPROFI 205 Bj.2001 with many accessories In good condition . Punching force 200 kN throat 560 mm Tools up to 100 mm Die thickness: 0.5 to approx. 10 mm. Further data see data sheet .

Condition: used, pressure 25 t stroke 500 mm throat 355 mm dayligth 800 mm table surface area 500 x 500 mm table height over floor 700 mm ram surface 250 x 250 mm power requirement 7,5 kW Weight 2,1 t Fgodpevzxq Sefx Ab Tek dimensions of the machine ca. 1,45 x 0,9 x 2,55 mxmxm hole in the table 180 mm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive as is where is, WITHOUT putting into operation, in given condition

Condition: ready for operation (used), Year of construction: 2018, operating hours: 58 h, General Data Measurements width 4360 mm Measurements depth 1718 mm Measurements height 3910 mm Machine weight 7600 kg Fjdpex D Nc Hsfx Ab Togk Injection Unit Screw diameter 35 mm Injection pressure 2500 bar Clamping Unit Clamping force 1000 kN This Arburg ALLROUNDER 1200 t 1000 - 400 Injection moulding machine was manufactured in the year 2018 in Germany. It has 58 production hours. The machine has a clamping force of 1000 kN, machine like new, used only for testing. Machine needs to be CE certified by the customer, we have a quote from a third party starting at 2.000€. Application Types Injection Moulding

Condition: good (used), mileage: 562,300 km, power: 397 kW (539.77 HP), first registration: 02/2021, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: yellow, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: air, Year of construction: 2021, Equipment: AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, onboard computer, parking air conditioner, parking heater, retarder, spoiler, = Additional Options and Equipment = - Rear work lights - Front work lights - High beam - Windscreen - Enclosed cab - Cab - Tipping hydraulics - Sleeper cab - Sideskirts - Auxiliary heater - Pre-heating system - Power Take-Off (PTO) = Notes = Scania S540 Highline 4x2 – PTO/Hydraulic – Night climate control – Retarder – Full specification MY: 16-02-2021 Mileage: 562,300 km YS2S4X20005609705 Full spec truck PTO & hydraulics 2x tanks Night climate control Full air suspension LED Navigation Leather Etc. = Further Information = Technical Information Number of cylinders: 6 Transmission Gearbox: Opti Cruise, 12-speed, automatic Axle Configuration Fedpfxox E Sl Aj Ab Togk Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Max. axle load: 8,000 kg; Steered; Tire tread left: 50%; Tire tread right: 50% Rear axle: Tire size: 315/70R22.5; Twin tires; Max. axle load: 11,500 kg; Tire tread left inner: 60%; Tire tread left outer: 60%; Tire tread right inner: 60%; Tire tread right outer: 60% Weights Unladen weight: 8,962 kg Payload: 10,538 kg Gross vehicle weight (GVW): 19,500 kg Functional Body brand: Scania Condition Technical condition: good Optical condition: good

Year of construction: 1997, condition: excellent (used), Hydraulic system - clamping hydraulics Fodpfjmx Slzex Ab Tsgk For tool clamping - Clamping device Make:BACHOFEN HYDRAULIK Type:HA3B-L1/90 Year.15/1997 Tank : 3 L Clamping pressure :90 Bar In very good condition .

Condition: ready for operation (used), Year of construction: 2001, Injection Unit Screw diameter 55 mm Clamping Unit Clamping force 2500 kN Fedpfxjx D Ecvj Ab Tsgk This Engel ES 1050/250 HL-V was manufactured in 2001. It features a screw diameter of 55 mm, clamping force of 2500 kN, and an opening stroke of 850 mm. The tool mounting platen measures 1050 x 650 mm, and it includes a robot. Consider the opportunity to buy this Engel ES 1050/250 HL-V hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2001, General Data Measurements height 405 mm Dimensions Machine Length 405 mm Clamping Unit Clamping force 800 kN This Krauss Maffei 80-220 C1 was manufactured in 2001. It features a clamping force of 800kN and a mold opening force of 55kN. The machine includes a robot, although it has a vacuum malfunction. Ideal for those looking to enhance their production capabilities in injection moulding. Contact us for more information about this machine. Application Types Injection Moulding Fjdpfx Aox D Ea Ieb Tsgk

Condition: ready for operation (used), Year of construction: 2009, Injection Unit Screw diameter 180 mm Clamping Unit Clamping force 3300 kN Fgedpfxjx D I R As Ab Tjk This OiMA SACMI 3300-180 was manufactured in 2009. It features a robust electric-hydraulic hybrid drive and an integrated cooling system. The machine is equipped with a GDNet communication interface for real-time monitoring and diagnostics, ideal for producing medium-to-large plastic components. Consider the opportunity to buy this OiMA SACMI 3300-180 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Year of construction: 2003, condition: ready for operation (used), Control Unit Brand SIEMENS Fjdpfx Abex D Rx No Togk Model SIMATIC OP7 This MILLUTENSIL MIL163 hydraulic press was manufactured in 2003. Ideal for various pressing applications, it offers robust performance and reliability. Consider the opportunity to buy this MILLUTENSIL MIL163 hydraulic press. Contact us for more information. Application Types Stamping

Condition: ready for operation (used), Year of construction: 2011, Injection Unit Screw diameter 90 mm Screw speed 180 r/min Fodpjx D Sxqofx Ab Togk Clamping Unit Clamping force 6500 kN Opening stroke 1650 mm Max open daylight 3650 mm Distance between bars 1160 × 960 mm Mould height min 400 mm Mould height max 2000 mm Ejector stroke 210 mm Ejector force for / back 150 kN This Engel DUO 4550/650 was manufactured in 2011. It features a clamping force of 6500 kN and a maximum opening stroke of 1650 mm. The machine supports a mold height ranging from 400 mm to 2000 mm and a platen size of 1510 × 1440 mm. The screw diameter is 90 mm, enhancing its injection capabilities. Consider the opportunity to buy this Engel DUO 4550/650 hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Year of construction: 1995, condition: ready for operation (used), General Data Machine weight 13500 kg Measurements height 2300 mm Dimensions Machine Length 6400 mm This DEMAG Ergotech System 250 - 1450 was manufactured in 1995. A robust hydraulic injection moulding machine, it features a clamping force of 2500 kN and a screw diameter of 70 mm. It's equipped with a Sepro robot, energy-saving DFE hydraulic control pump, and a modular design for versatile applications. The machine dimensions are 6.4 × 1.9 × 2.3 m, and it includes a comprehensive operator terminal with a 10-inch LCD display. Contact us for more information about this machine. Fgsdpfsx D Dn Rex Ab Tek Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2008, operating hours: 98,000 h, Clamping Unit Clamping force 240 ton This Netstal SynErgy 2400-900 was manufactured in 2008. An hydraulic injection moulding machine with 98,000 hours of service and a clamping force of 240 tons. Consider the opportunity to buy this Netstal SynErgy 2400-900 injection moulding machine. Contact us for more information. Application Types Fjdpfox D Nrbex Ab Togk Injection Moulding

Condition: ready for operation (used), Year of construction: 2004, Injection Unit Screw diameter 80 mm Shot weight 1212 cm³ Stroke volume 1212 cm³ Injection pressure 1877 bars Fgjdpox D N E Iofx Ab Tok Clamping Unit Clamping force 420 kN Ejector stroke 230 mm Additional Equipment SEPRO Robot Included This DEMAG Ergotech System 420-1450 was manufactured in 2004. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this DEMAG Ergotech System 420-1450 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Year of construction: 2018, condition: ready for operation (used), This MILLUTENSIL MIL 163 was manufactured in 2018. A robust hydraulic press with a table size of 2000 mm by 1200 mm, it can handle a maximum load of 5000 kg and exerts up to 163 tons of pressure. Ideal for applications like mold adjustment, injection molding, and die casting. Control is manual or semi-automatic. Contact us for more information. Fgjdox D Rliopfx Ab Tok Application Types Bending

Condition: ready for operation (used), Year of construction: 2000, operating hours: 3,688 h, General Data Measurements width 1160 mm Measurements depth 5146 mm Measurements height 2365 mm Machine weight 9800 kg Injection Unit Screw diameter 60 mm Fgsdox D Rg Tepfx Ab Tok Shot weight 644 g Stroke volume 678 cm³ Clamping Unit Clamping force 250 T Opening stroke 580 mm Max open daylight 1130 mm Mould height min 250 mm Mould height max 550 mm Additional Equipment Core Pull: 2 Air Circuit: 1 This Victor VS-250 hydraulic injection moulding machine was manufactured in 2000. It is ideal for precision plastic processing tasks. Contact us for more information about this machine. Application Types Injection Moulding