Used Hsk63 for sale (89)

Condition: like new (used), Year of construction: 2017, operating hours: 1,075 h, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, controller manufacturer: Fanuc, table width: 500 mm, table height: 500 mm, table load: 500 kg, rotational speed (max.): 15,000 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 70 bar, Horizontal Machining Center DMG MORI NHX 5000, 2nd Generation Control: M730UM Celos X: 730mm Y: 730mm Z: 880mm Milling Spindle Interface: HSK63-A Speed: 20-15,000/min Power: 37 kW Lrjdpfx Aijzdllwjisn Torque: 250 Nm Pallets Number: 2 Size: 500x500 Load capacity: max. 500 kg Type: Grid pattern Tool magazine Positions: 60 Type: Rotary Coolant system: Knoll system, 70 bar Mist extractor The machine comes from a research institute and has only run for approximately 1075 spindle hours to date. Condition: as new Availability: short notice

Year of construction: 2002, condition: ready for operation (used), travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 18,000 rpm, tool weight: 10,000 g, number of axes: 4, This 4-axis FPT DINO CNC Gantry Milling Machine was manufactured in 2002. It features an impressive X-axis travel of 2,800 mm, Y-axis travel of 1,600 mm, and Z-axis travel of 800 mm. The machine is equipped with an electrospindle capable of speeds up to 18,000 RPM and a robust gantry type cast-iron construction. If you are looking to get high-quality milling capabilities, consider the FPT DINO machine we have for sale. Contact us for further details. • Rapid feed rate: 35,000 mm/min • Total installed power: 68.7 kW / 93.4 HP • Power supply: 400 V, 50 Hz, 116.1 A • Machine structure: Gantry type cast-iron construction • Spindle: Electrospindle, 5,000 / 10,000 / 15,000 rpm • Spindle speed: 18,000 rpm • Spindle taper: HSK63 • Tool magazine capacity: 40 positions Lodjzbic Aopfx Aiiern • Max tool diameter: 70 mm • Max tool length: 300 mm

Condition: used, Year of construction: 2000, machine/vehicle number: AA1/11510, functionality: fully functional, operating hours: 19,250 h, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, travel distance X-axis: 3,080 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,080 mm, workpiece width (max.): 1,200 mm, number of axes: 3, number of slots in tool magazine: 12, total height: 2,346 mm, overall weight: 4,000 kg, Equipment: CE marking, documentation/manual, We are offering this used SCM Record 130 machining center, year of manufacture 2000. Equipped with a more powerful vacuum pump (2050 m³/h), vector rotary axis, angle gearbox adjustable from 0 to 100 degrees (HSK63), drilling unit with 9 spindles, and low operating hours. If you have any questions or require further information, please feel free to send us a message or call us. Lodpfxeyzadro Aiijrn

Condition: ready for operation (used), Year of construction: 2020, operating hours: 4,726 h, spindle speed (max.): 15,000 rpm, travel distance X-axis: 900 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, spindle motor power: 51,000 W, table load: 500 kg, number of slots in tool magazine: 90, number of axes: 5, This 5-axis Quaser UX630 was manufactured in 2020. It features a powerful HSTec HM-15A spindle with a speed of 15,000 rpm and a robust rotary/tilt table capable of handling workpieces up to Ø630 × 540 mm. The machine is equipped with a 90-position tool magazine and includes advanced options like a Renishaw 3D workpiece probe. If you are looking to get high-quality machining capabilities, consider the Quaser UX630 universal machining centre we have for sale. Contact us for further details. • 5-axis simultaneous machining; B-axis ±120°, C-axis 360° continuous • Spindle: HSTec HM-15A built-in, HSK-A63, 162 Nm • Rotary/tilt table: Peiseler (Germany), Direct Drive, Ø480 mm; max load 500 kg; max workpiece Ø630 × 540 mm • Control: Heidenhain TNC 640 with options DCM, Kinematics Opt, LAC, DNC (Opt. 18) • Tool magazine: 90 positions (HSK-A63) • Through-spindle coolant: 20 bar • Heidenhain linear scales on all axes • Spindle operating hours: 4,726 • Note: Dust extractor shown in images is excluded Additional equipment • Renishaw 3D workpiece probe • Blum laser tool measurement • Schunk Vero-S zero-point clamping system • NP clamping system Lrodpfx Aioza E U Sjijn • BMO robot interface installed and programmed (robot not included) • HSK63 tooling included

Condition: ready for operation (used), Year of construction: 2012, operating hours: 29,801 h, travel distance X-axis: 729 mm, travel distance Y-axis: 401 mm, travel distance Z-axis: 361 mm, controller manufacturer: FANUC, controller model: Series 31i, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis CHIRON FZ 15 KWM HS vertical machining center was manufactured in 2012. If you are looking to get high-quality milling capabilities, consider the CHIRON FZ 15 KWM HS machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Availability: available from 1/7/25 • Operating voltage: 400 v Lrjdpfx Aex D Nmleiien • Control voltage: 230/23 v • Material processed in the machine: aluminum • Cone type : hsk-63 • 48 tool stations • Tool holder: HSK63 Extra Information Machine still under power

Condition: new, Year of construction: 2025, operating hours: 100 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, nominal power (apparent): 25 kVA, torque: 135 Nm, controller manufacturer: Siemens, controller model: 828D, workpiece weight (max.): 600 kg, total height: 3,000 mm, total length: 2,600 mm, total width: 2,310 mm, table width: 1,000 mm, table length: 550 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 10 h, coolant supply: 30 bar, spindle motor power: 19,000 W, spindle nose: HSK63A, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical Machining Center VM800 - Demonstration Machine - Technical specifications: Control unit: Siemens 828D Milling spindle 12,000 rpm, HSK63 Internal coolant supply (IKZ) 30 bar Bed flushing Renishaw OMP60 touch probe (Heidenhain available on request) Renishaw TS27R tool measurement (Heidenhain or BLUM available on request) Direct measuring systems in X, Y, Z axes by Heidenhain Rotating inspection window SPINVISTA (Black Edition) Automatic door Robot interface Automatic power-off function Lrodpfx Ajyr A T Ajiisn Automatic tool changer (30 positions, HSK63) Centralized automatic lubrication system Telescopic way covers Electronic handwheel for manual operation Signal lamp Machine operating manual Pneumatic air gun Water gun Air blow gun Chip conveyor Coolant tank 286L This and other machines from GEWA Werkzeugmaschinen GmbH are available for viewing at our facility in the Eifel region.

Condition: new, Year of construction: 2026, VIDEO available upon request – Affordable four-axis profile machining center (X, Y, Z + I – rotary axis for the table) for the automatic 3-sided machining of profiles made of aluminum, non-ferrous metals, plastics, and steel up to 3 mm wall thickness – brand new. CNC control system based on Windows® with 3D color graphics and simultaneous machining. Maximum machining length: 3,000 mm Maximum clampable profile length: 3,700 mm Machining of longer profiles possible Maximum profile cross-section: 200 x 180 mm Milling spindle drive power: 4.5 kW (optional 8 kW) Ledpozcnztefx Aiiern Tool holder: SK30 (optional HSK40 / HSK63) Milling spindle speeds: 120 to 24,000 rpm Space requirement, including mobile control panel and rear safety fence: approximately 5.5 m x 3.1 m x H 2 m Weight: approximately 1,500 kg - Covered tool magazine for six tools - Automatic tool length measurement - Automatic front door - Rear work area protection by safety fence with access door - 6 pneumatic clamping bridges - 2 longitudinal stops (left and right) - CNC control system based on Windows® with 3D color graphics and simultaneous machining

Condition: used, Year of construction: 2023, New demonstration machine! List price: €86,567 net Base machine complete in standard configuration for drilling and grooving: For detailed technical data, please refer to the ProTec Type 0571 data sheet. Processing unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in through-feed modemax. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg Milling unit Profit HSK63F with 3-position magazine for automatic tool change, motor 5.5 kW (S1), 1000–20,000 rpm with frequency converter, clockwise and counterclockwise rotation, for tool holders HSK63F with collet chuck 462E/OZ25, cutter length up to 130 mm. Information: Machining unit MultiUnit with PowerBlock with 21/23 spindles, grooving saw and optional Profit milling unit. Connected load 12 kVA Rated current 17.5 A Fuse 32 A Voltage 400 V, 50 Hz, 3 Ph (without transformer) Network TN or TT Pneumatic connection 7 bar (102 psi). At the machine: coupling plug (quick coupling) ¼, DN7.2, brass, factory-supplied. For the machine: coupling socket (quick coupling) ¼, DN7.2, brass, customer side. Supply line, inner hose diameter 12 mm (min.). Compressed air consumption continuous operating air consumption approx. 230 L/min (approx. 3.8 L/sec) (compressed air). Extraction connection 3x extraction outlets dia. 80 mm. Extraction air velocity 30 m/sec - measured at the extraction outlet. Extraction requirement min. approx. 2500 m3/h. Machine weight approx. 1650 kg (with options!). Machine installation area: In general, a ProTec fix can be bolted to the floor. A concrete floor (or foundation) is required (at least at the four machine corners/feet). Equipment: Protec 571 Profit HSK63F with 3-position magazine. Roller table 765 mm (Y-axis), foldable, for machine front, width 500 mm. Roller table 765 mm (Y-axis), foldable, for machine rear, width 500 mm. Auxiliary stop 600 mm with integrated rollers for roller tables. Additional safety device with lamella curtain. Prerequisite for horizontal routing for Lamello P-System (without Lamello P-System tools). Drill bit set for Protec shank ø 10 mm with clamping surface (JSO) 1 HW-roof tip drill bit 5x70mm (NL 35mm), LH # 30566-5-05035-L 3 HW-dowel drill bits 5x70mm (NL 35mm), RH #30540-5-05035-R 4 HW-dowel drill bits 5x70mm (NL 35mm), LH #30540-5-05035-L 3 HW-dowel drill bits 8x70mm (NL 35mm), RH #30540-5-08035-R 5 HW-dowel drill bits 8x70mm (NL 35mm), LH #30540-5-08035-L 2 HW-dowel drill bits 10x70mm (NL 35mm), LH #30540-5-10035-L 1 HW-cup drill bit 15x70mm (NL 35mm), LH #30300-5-15070-L 1 HW-cup drill bit 20x70mm (NL 35mm), RH #30300-5-20070-R 1 HW-cup drill bit 35x70mm (NL 35mm), RH #30300-5-35070-R 1 HW-grooving cutter ø 125/30 mm groove width (SB) 4.0 mm, Z=12, LH, Leitz Only for chipboard and MDF, solid wood on request and subject to agreement Tool holder HSK63 F 3.00 pcs For collet 462E/OZ25 Collet 462E/OZ25 for shank 25 mm 3.00 pcs Indexable insert shank cutter Z1+1 1.00 pc HW with indexable insert drill tip ø20, S25, LH 120, L2/L3 58 mm Grooving cutter HW indexable inserts Z1 1.00 pc with indexable insert drill tip, D Ø 10 mm, d Ø 10 mm, L1 75 mm, L2 25 mm, L3 40 mm, RH (adapter 0571WAB10 to be ordered separat Lodpfxow Tfzfo Aiijrn

Condition: used, Year of construction: 2005, operating hours: 71,080 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 65,000 m/min, feed rate Y-axis: 65,000 m/min, feed rate Z-axis: 65,000 m/min, total length: 8,000 mm, table length: 4,050 mm, table width: 2,050 mm, total width: 7,500 mm, spindle speed (max.): 22,000 rpm, total height: 6,200 mm, table height: 500 mm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 65 m/min, rapid traverse Z-axis: 65 m/min, position of the milling head: vertikal, torque: 28 Nm, tool weight: 6,000 g, control cabinet length: 600 mm, control cabinet height: 2,600 mm, control cabinet width: 4,200 mm, tool diameter: 100 mm, As the manufacturer, we are pleased to offer this gantry milling machine from FOOKE GmbH. This machine perfectly combines dynamics with precision, making it an ideal choice for machining large components. Key Benefits of Buying Directly from the Manufacturer: Retrofit Options Available: Upon request, we can provide a customized retrofit to perfectly adapt this machine to your future production requirements. Spare Spindle in Stock: Minimize downtime – a matching replacement spindle is currently in stock at our facility and immediately available. Technical Specifications General Information: Machine Type: 5-Axis Gantry Milling Machine Model: ENDURA® 907.2LINEAR Year of Manufacture: 2005 Control Unit: Siemens SINUMERIK 840D Availability: Immediately Travel & Working Range: X-axis travel: 5,000 mm Y-axis travel: 3,000 mm Z-axis travel: 1,500 mm Max. Workpiece Dimensions: 4,000 x 2,000 x 1,000 mm (L x W x H) Milling Head & Main Spindle: Tool Taper: HSK63A Max. Spindle Speed: 22,000 rpm Spindle Power Capacity: 30 kW Max. Torque: 28.6 Nm A-axis (swiveling): 220° (+/- 110°) C-axis (rotating): 365° (+/- 182.5°) Tool Changer & Dynamics: Magazine Capacity: 20 stations (for HSK63 Form A tools) Max. Tool Diameter: 100 mm Lrsdpfx Aezcb D Usiien Max. Tool Weight: 6 kg Rapid Traverse (X/Y/Z): 65 m/min Feed Rates: up to 65,000 mm/min Dimensions & Weight: Total Power Requirement: 150 kW Machine Weight approx.: 78 tons Footprint / Dimensions approx. (L x W x H): 7.5 x 8.0 x 6.2 m Additional Equipment Included: Head Extraction System: Equipped with an integrated head hood, designed for connection to an on-site extraction system. NC4 Laser System: Non-contact laser tool inspection and breakage detection system. RMP60 Wireless Probe: Radio-transmission workpiece measurement system by Renishaw. Roller Blind Covers Contact Us Do you have any questions or require further information regarding a tailored retrofit? Please feel free to send us a message through the platform or give us a call. As the manufacturer, we look forward to assisting you!

Condition: as good as new (ex-display), Year of construction: 2020, machine/vehicle number: VT0341, functionality: fully functional, High-performance machining center SPINNER VC850-5A Travel distances X850, Y510, Z510 mm High-performance milling spindle up to 18,000 rpm Power Pmax 20 kW / Nmax 66 Nm as a built-in hybrid spindle with direct drive, without belt Tool holder on the spindle HSK63 TOOL MAGAZINE with 32 tool stations DIRECT MEASURING SYSTEMS in the X/Y/Z axes In the latest generation of SIEMENS "SINUMERIK ONE" control system - SPINNER - SPIOS 24" touch operating panel for I4.0 applications - Operating panel height-adjustable, rotatable and tiltable for best ergonomics - incl. engraving cycles - 24" liquid crystal flat color screen with multi-touch functionality - User memory 2 GByte - 15 zero-point shifts - 1 free USB interface - Ethernet interface standard SPINNER MULTI-CONTROL WHEEL on the operating panel, integrating the following functions into a single control element: - Handwheel function in jog mode - Feed override in automatic mode - Start button and feed influence in single-block setup mode, automatically resetting to 0% at the end of the sequence -> all important functions of the setup mode integrated into one control element Ledpfx Aioy S Ttzjisrn Electrical preparation for HOWIMAT 2-axis rotary tilting table on VC850/VC1150 2-axis ROTARY TILTING TABLE mounted on the right in the working area particularly rigid and space-saving, suitable for holding chucks or collets TILTING AXIS: - Dividing accuracy +- 0.005 degrees - Swivel range 105 degrees - Maximum tangential moment 1,200 Nm ROTARY AXIS with direct drive via coaxial motor: - Dividing accuracy +- 0.005 degrees - Bore 80mm, spindle nose D=160 mm - Maximum tangential moment 500 Nm UNIVERSAL CHIP CONVEYOR VC850 PREPARATION of the spindle FOR HIGH PRESSURE for using the additional tank up to 70/80 bar HIGH-PRESSURE TANK 70bar with paper band filter for flushing centrally through the spindle Additional compressed air supply at the spindle head Compressed air centrally through the milling spindle Flushing gun in the working area PREPARATION FOR SPINNER STANDARD PROBING SYSTEM Wireless SPINDLE PROBE ADDITIONAL HOOD on top for a closed working area STANDARD DOCUMENTATION in German consisting of machine manual and CNC manuals is delivered in digital form on the control system. Paper manuals available at an additional cost. RING EYES for crane unloading, set consisting of 4 pieces absolutely necessary for crane transport STANDARD PAINTING two-color in light gray RAL7035 and blue-gray RAL5008 Electrical design EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN network (5-conductor) Notes: The price includes warranty services only within Germany. In the case of new and demonstration machines, the images are not necessarily of the individual machine, but of comparable machines. Accessories shown, such as clamping devices or tool holders, are included in the scope of supply only to the extent listed in the technical description. Please request a detailed offer ex works. Visit our factory near Munich or one of our showrooms. We may have other offers for comparable machines. Subject to prior sale.

Condition: defective spare-parts repository (used), Year of construction: 2005, operating hours: 38,534 h, functionality: not functional, machine/vehicle number: 29310001024, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, controller model: Heidenhain iTNC530, rotational speed (max.): 18,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 750 mm Travel Y-axis: 600 mm Travel Z-axis: 560 mm Worktable size: 950 x 650 mm Table load: 1,000 kg Ljdpfey Ib H Iox Aiiern Spindle speed: 18,000 rpm Number of axes: 3 Tool changer: 30 positions Tool holder: HSK63 MACHINE DETAILS CNC control: Heidenhain iTNC530 Dimensions & Weight Dimensions (L x W x H): 3,500 x 3,000 x 3,200 mm Transport dimensions (L x W x H): 3,500 x 3,000 x 3,200 mm Weight: 10.2 t Operating hours Spindle hours: 38,534 h Operating hours: 98,381 h Note: DMG has measured the clamping force on the machine, which is so low that there is a risk of the tool falling out. The machine has suffered spindle damage. There are various leaks, for example at the chip conveyor or in the door area.

Condition: defective spare-parts repository (used), Year of construction: 2003, operating hours: 30,434 h, functionality: not functional, machine/vehicle number: 1114 000402 3, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: Heidenhain iTNC530, rotational speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 1,060 mm Y-axis travel: 710 mm Z-axis travel: 710 mm Working area: Ø800 NC rotary table Spindle speed: 10,000 rpm Number of axes: 5 Tool changer: 30 stations Tool holder: HSK63 MACHINE DETAILS Control: iTNC530 Dimensions & Weight Machine dimensions (L x W x H): 4,080 x 4,490 x 3,117.5 mm Transport dimensions (L x W x H): 3,500 x 2,500 x 2,410 mm Weight: 9.7 t Operating hours Spindle hours: 30,434 h Ljdjy Ib A Njpfx Aiisrn Operating hours: 66,001 h Note: The machine temperature rises immediately, and in the past there has even been smoke. The machine has spindle damage. Various cable insulations are worn.

Condition: ready for operation (used), Projector for optical data capture Electronic digital displays for measuring tool radius and height HSK63 toolholder for PowerLock tools Desktop PC with operating system PC is fully installed, configured, and tested with dedicated PowerCom software for the POWERMAT system Lodpsy Sf Nzsfx Aiiern User manual Year 2010

Condition: used, Year of construction: 2000, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, nominal power (apparent): 48 kVA, torque: 143 Nm, controller manufacturer: SIEMENS, controller model: 840D power line, workpiece height (max.): 800 mm, workpiece diameter (max.): 850 mm, workpiece weight (max.): 500 kg, total height: 3,700 mm, total length: 6,500 mm, total width: 3,300 mm, table width: 500 mm, table length: 400 mm, table load: 500 kg, overall weight: 10,000 kg, spindle speed (min.): 45 rpm, spindle speed (max.): 16,000 rpm, coolant supply: 70 bar, spindle motor power: 30 W, number of slots in tool magazine: 80, tool length: 320 mm, tool diameter: 150 mm, tool weight: 12,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, HELLER MCi16 840Dpl • Year of manufacture: 2000 • Tool holder: HSK63 • Max. tool length: 320 mm • Chip-to-chip time: 2.8 s • Spindle power: 40 kW • Spindle speed: 45 - 16,000 rpm • B-axis: NC axis (360,000 x 0.001) • Travel X, Y, Z: 630 mm • Rapid traverse speed X, Y, Z: 40 m/min • Feed rate X, Y, Z: 40 m/min • Feed forces X, Y, Z: 10,000 N • Acceleration: 7 m/(s²) • Pallet changer: double (change height 800 mm) • Magazine: chain magazine with 80 positions • 2nd control panel at magazine loading station • Hydraulic workpiece clamping • BLUM touch probe receiver • Interface for 5th axis • SIEMENS PCU • KNOLL VFR (vacuum rotary filter) system and chip conveyor • Coolant chiller unit • Oil mist extraction The machine has been used exclusively for finishing aluminum components and is being removed from production due to capacity reasons. Our company specializes in HELLER machine tools, and the above-mentioned machine has been serviced by us in recent years. A condition assessment was performed on-site and can be provided upon request. The spindle’s tool clamping system was replaced in 2025. The result of the machine geometry measurement will be provided as soon as available. The machine can be inspected under power by serious prospective buyers by prior arrangement. Location: 72379 Hechingen, Baden-Württemberg, ex works Ljdpfxjy Rn H Hs Aiijrn

Year of construction: 2005, condition: used, CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production. Accessories: Total enclosure Software path management Software P- System for peeling cutters, Software shaft endmills (207/208) Software discoid tools face (221/222/223/224) Software profiled workpieces (233/234/239/240) Software hoggers, profiled hoggers (255/256/257/258/260/261/262/263) Software discoid tools (264/265) Software shaft and jointing cutters (267/268/277/278) Software step tools (271) Software scoring saws (299) Software saws flat tooth (301) Software saws single sided with chamfer (302/303) Software saws alternate tooth (304) Software saws triple chip (309) Software saws flat top tooth (310) Software saws flat trapezoid tooth (311) Software saws alternate tooth with chamfer (312) Lsdjw S I Dgspfx Aiiern Software shaft and jointing cutters (7/8) Software shaft and jointing cutters profiled (33/34) Software hoggers, profiled hoggers (53/54/55/56/57/58) Software discoid tools (64/65) Software shaft and jointing cutters (67/68/77/78) Software compensation (90) Software saws flat tooth (101) Software saws single sided with chamfer (102/103) Software saws alternate tooth (104) Software saws triple chip tooth (109) Software saws flat top tooth (110) Software saws triple chip tooth (111) Software saws alternate tooth with chamfer (112) Software for polishing of profiled hoggers (757/758/760/761) Filter system with chiller for dielectric fluid Automatic fire extinguishing system DIN 14497 Standard programs for measuring, eroding etc. Program for chamfering of workpiece cutting edges, Automatic Diagnosis program for machine operational status with text output on screen Loader for workpieces, with CNC-controlled pivot for loading and unloading to a magazine, 6 sided erosion wheel changer, Workhead SK 50 with adapter to 12 HSK 63 A, Turntable workpiece magazine for 12 workpieces SK 50, Turntable workpiece magazine for 4 workpieces SK 50, 6 flush sets QXD250 CAD/CAM for external PC workstation including ARES drawing program, Industrial PC external PC workstation with desktop PC, monitor, keyboard, and mouse, 1 HSK63 F adapter for measuring the machine. X axis travel: 730 mm B axis travel: +/- 30 ° Y-axis travel: 840 mm Z axis travel: 500 mm E-axis: 330° A-axis: 360° Workpiece carrier: SK50 workpiece length max.: 400 mm Workpiece diameter max.: 400 mm workpiece weight max.: 15 kg Connected load approx.: 6.7 kW (400 V / 50 Hz Dimensions W x D x H approx.: 2160 x 3435 x 2190 mm Weight approx.: 7800 kg colour: RAL 7047 Telegray 4, color RAL 7045 Telegray 1

Condition: used, Year of construction: 2013, Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as saws, milling cutters etc. using the wire-electro-erosion process. Accessories: Lrjdpfx Ajylkvleiion Total enclosure, Adaptation to A-axis on HSK63-A,E incl. test mandrel Ø 25 mm System HSK63 A,E Integrated loading system and workpiece magazine for automated processing of up to 12 workpieces. Probe, Automatic central lubrication, Coolant system for dielectric fluid, Automatic fire extinguishing system, Mist extractor, Machine lamp. Cutter outside diameter: Max. 320 mm Shank tool diameter: 10-320 mm Outside diameter disc-shaped tools: Max. 320 mm Cutting length: max. 480 mm Tool weight: max. 20 kg X axis travel: 500 mm Y-axis travel: 300 mm W-axis travel: 200 mm A-axis rotation range: 360 ° E-axis swivel range: 180 ° Required space for the machine: 2535 x 2200 x 2280 mm Weight approx.: 4800 kg Connected load: 5,4 kW colour: gray RAL 7035/7043

Year of construction: 2017, condition: excellent (used), With B + C axis Working travels 800 x 900 x 620 mm Table diameter 800 mm Spindle taper HSK63 Spindle speeds -15'000 rpm Tool changer 64 Pos. Control HEIDENHAIN iTNC 640 Lrsdpfjlhqz Uex Aiien Coolant through spindle Misc.accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2003, Technical details: x-travel: 800 mm y-travel: 400 mm z-travel: 350 mm total power requirement: 44 kW Lsdpeuqq Uqsfx Aiiorn weight of the machine ca.: 8,8 t dimensions of the machine ca.: 6,1 x 4,1 x 3,3 m tool taper: HSK63 number of spindle speeds: 36-12.000 Number of tools: 2 x 21 St. rotary table diameter: 1340 mm

Condition: new, Year of construction: 2025, Z-MaT UA650, 5-Axis Simultaneous Machining Center Siemens ONE, 15" LCD display Dual torque direct drive Travel (X/Y/Z): 800/800/550 mm Rapid traverse (X/Y/Z): 48/48/48 m/min Cutting feed: 1-10,000 mm/min Spindle Spindle speed: 18,000 rpm, built-in Spindle taper: HSK63 (HSK100) Spindle motor: 30 kW, Siemens Air blast through spindle Spindle air curtain Spindle oil cooler Double arm tool changer, 30 tools (40/60/200 optional) Max. tool weight: 8 kg Lredpfx Aiewku Evoien Max. tool length: 300 mm Max. tool diameter: 75/120 mm Table Table diameter: Ø 630 mm Max. workpiece diameter: 650 mm Max. table load: 850 kg T-slot (width x number x spacing): 18H8 x 7 x 80 mm Distance from spindle center to table surface: 120–670 mm A-axis swivel range (tilt): ±120° C-axis rotation: 360° Max. rapid traverse A/C axes: 60/100 rpm A/C-axis encoders Standard Equipment End-of-operation light, 3-color status light Electronic handwheel (MPG) Work area lighting Roller linear guides Automatic lubrication system (grease) 3-axis glass scales, air pressurized (XYZ) Automatic tool changer Air blow gun Coolant gun Coolant tank Coolant flush system (chip flushing) Full splash guard Transformer: 400V, 50Hz Control cabinet heat exchanger Automatic shutdown Leveling bolts and blocks Toolbox CE compliance Hinged belt chip conveyor Machine Size and Weight Machine dimensions (L x W x H): 2728 x 3760 x 3726 mm Machine weight: approx. 16,500 kg Errors and prior sale excepted A wide range of automation options available

Condition: excellent (used), Year of construction: 2011, 4-AXIS ROUTER MILLING CENTER TOOL CHANGER FOR 9 TOOLS Brand: POUWELS Model: DEF 1000 Type: SPEEDO Serial number: 135 Year: 2011 (Machine available for viewing in our workshop by appointment) The DEF 1000 router is designed for routing parts of all kinds, exclusively in wood. It is specialized for the manufacture of staircases. MACHINING CAPABILITIES: Movements (machining strokes): - X-axis travel: 6000 mm (installed option) - Y-axis travel: 1000 mm - Vertical movement (Z-axis): 380 mm Lrsdslc Hzwjpfx Aiien - Maximum travel speeds: - X-axis: 75 m/min - Y-axis: 75 m/min - Z-axis: 30 m/min - C-axis rotation: -90 +90° MACHINE COMPOSITION - Control panel: Windows 7 Pro computer - Ethernet hub - Manual or programmed control mode: - Pouwels Prostair program, direct link to Autocad 2008 - Control system: Num 1050 Digital Drive - 3-axis routing heads 7.5 kw - 0 to 24000 rpm - Horizontal routing head with rotation (C-axis) 7.5 kw – 24000 rpm - Fixed lateral tool changer for 9 tools HSK63 F ER32 collets OTHER FEATURES: - Power supply: 400v Three-phase + N + T - Installed power: 15 kW Max 37.5A - Suction cups Ø180mm and Ø120 h.70mm - One vacuum pump 170 m3/h - Pneumatic supply: 8 bars - CE standards - Extraction: centralized outlet Ø 250 mm - Recommended flow rate: 8000 m3/h (minimum 5500) Dimensions: 8300 x 3500 x 2050 mm Weight: 8560 kg We invite you to contact us for the supply of consumables, accessories and/or extraction systems. Machine offered as is. Price EXW (Ex Works). Delivery and additional services available upon request.

Condition: like new (used), Year of construction: 2008, I sell the throughfeed nesting CNC working centre Biesse Excel NBC 712 X1-S Year 2008. Very productive and fast. Automatic infeed table. Lrjdpfx Aiefwvppeisn Working area 3730x2200mm Configuration: Milling head HSK63 12kW, 1000-24000 rpm, independend Z-axis liquid cooling with the 8 position HSK63 magazine 16+8+4 Drilling heads 1 Grooving saw D.150mm 2-position X/Y 1 Revolving electrospindle with cutting aggregate liquid cooling Software BiesseWorks Advanced + Biesse Nest. CD included. Pumps 3pcs. BUSCH 3x 300/360 m3/hr. Condition like new ! Fully working. Automatic system of central lubrication and dust collection connections. Complete with safety barriers, Transport elements and CE-points. CE-certyficate and full documents included.

Condition: good (used), Year of construction: 2001, I sell the 3-axis CNC working centre HOLZ-HER UNI-MASTER 7226 with beam table Year 2001. Configuration: 3-axis main spindle recently full reconditioned / Water cooled Tool magazine 6 positions HSK63 on working head 1 grooving saw X-direction Drilling head 16+4 spindles Useful working area 3100x1360mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. 2x Pump SIEMENS ELMO-L S22 2,35KW. Ledei U Dxuopfx Aiiern Good condition. Available immediately.

Condition: good (used), Year of construction: 2009, I sell the 3-axis CNC working centre HOLZ-HER PRO-MASTER 7023 with beam table Year 2009. Configuration: 3-axis main spindle 6 KW Tool magazine 8 positions HSK63 1 grooving saw X-direction Drilling head 16+4+2 spindles Useful working area 3200 x 1060 x 378mm. Lodpfjtt S D Rsx Aiijrn 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. Pump BECKER 250 m3/hr. Good condition. Available immediately.

Condition: good (used), Year of construction: 2000, I sell the 3-axis CNC working centre HOLZ-HER ECO-MASTER 7113 with beam table Year 2000. Configuration: 3-axis main spindle 7,5 KW Tool magazine 4 positions HSK63 1 grooving saw X-direction Drilling head 9+2 spindles Useful working area 2300 x 1000 x 130mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Lredstt Sy Hopfx Aiien Holzher software controller with full instructions. Pump RIETSCHLE 2,2 KW Good condition. Available immediately.

Condition: new, functionality: fully functional, Warehouse clearance of industrial accessories Specialized in spare parts for machine tools, CNC machining centers Siemens 8m, 850, 840C, 840D, Siemens NC motors Rexroth hydraulics and linear motion technology Festo pneumatics, Herion pneumatics Parker hydraulics Brinkmann pumps, pumps from various manufacturers Heidenhain measurement systems, ROD and linear measurement systems Coax coolant valves and sensors Balluff switches and sensors Phoenix Contact Römheld clamping devices Gerwah couplings HSK100, HSK63 tool holders Renishaw ABB Round sealing rings, Turcon Glyde seals Wickmann + Siemens fuses Euchner switches, Honeywell limit switches And much more... (not everything is shown in the pictures) Workbenches, drawer cabinets, heavy-duty shelving Ledpfsy Ibgzjx Aiisrn Final sale price with moderate asking: €950,000 Collection only