Used Hsc Milling Machine for sale (93,090)

Condition: used, Technical specifications: X-axis travel: 700 mm Spindle speed: up to 1500 rpm Feed rate: 12 - 1000 mm/min Table size: 1100 x 250 mm Swiveling head: yes Dimensions, approx.: 1750 x 1600 x 1850 mm Weight, approx.: 1900 kg Bedpfxoxtnn Te Acysww

Condition: good (used), Year of construction: 1995, Travel: X = 600, Y = 400, Z = 420 mm Speed range: 20 – 4000 rpm Gear stages: 3 Taper: SK 40 Quill stroke: 75 mm Spindle motor: 5.9 kW Feed range: 1 – 5000/6000 mm/min (manual/programmed) Rapid traverse x, y: 7 m/min Bedpfxew Uin Se Acyeww Rapid traverse z: 6 m/min Clamping surface: 900 x 458 mm Weight: approx. 2300 kg With coolant system, electronic handwheel, various tools (without cabinet)

Condition: used, Year of construction: 1990, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Dufour milling machine Type 220 Bjdpoxtm Hzefx Acyoww With digital readout

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 6,000 m/min, feed rate Z-axis: 6,000 m/min, table width: 450 mm, table length: 1,530 mm, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Bwedpfx Asxtmqtjcyjw Length: 2300mm Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Technical Data Grinding/Workpiece Diameter: up to approx. 300 mm (partially up to 350 mm) Grinding Length/Stroke: approx. 550 mm (slide travel) Module range (for hobbing cutter resharpening): min. module approx. 0.5 to max. module approx. 25 Number of flutes: typically 1–99 pieces (depending on tool set) Grinding wheel diameter: approx. 150–300 mm Grinding wheel speed: up to about 2,700 rpm Centre distance (workpiece spindle): typical range 400–800 mm Swivel/Pitch range: e.g. grinding wheel head swivel 0–15° Machine weight and space requirement: approx. 4.2–4.9 t weight; space approx. 3 × 2.6 × 2.3 m Electrical data: operating voltage e.g. 380 V three-phase, control 24 V, auxiliary voltage 220 V Bedpfx Asxtiunocyoww

Condition: excellent (used), Year of construction: 2022, Tilting spindle moulder with sliding table FELDER Model F 700 Z Sliding table length: 1000 mm Motor power: 5.5 kW Motor voltage: 3 x 400 V, 50 Hz Spindle tilting range: 90 - 45 degrees Spindle diameter: 30 mm Spindle speed: 3500/6500/8000/10000 rpm Table opening: 230 mm Extraction port diameter: 120/80 mm CE Note for used machines: • Errors in technical specifications and prior sale excepted. • Listed prices are ex-location – free loading! • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any warranty. Buyers are welcome to inspect the machines at the location. • Special agreements only valid in written form. Bwodpfx Aowu D A Escysw (We only respond to inquiries including your address and telephone number!)

Condition: excellent (used), SCM T150 spindle moulder (under-table type) Automatic spindle height adjustment (up/down), tiltable from -10 to +45 degrees, and fence adjustment Interchangeable 50 mm spindle Bwsdpfoxun Uvox Acyjw Pneumatic HSK spindle clamping (same principle as CNC machines) Long tables 250 cm with extension 4-roller power feed 5 spindle speeds 5.5 kW motor Spindle lock Brake Very good condition, machine checked and fully ready for operation.

Condition: used, functionality: unexamined, Copy Milling Machine DECKEL Model: KF 1 Bedpjxunlzsfx Acyoww Machine No.: 61510 Year of manufacture: 1981 Weight approx.: 1 t

Condition: good (used), Year of construction: 2009, functionality: fully functional, Spindle diameter 30 mm Tiltable on both sides from -45.5° to +45.5° Motorized height and tilt adjustment Infinitely variable speed adjustment from 1,500 to 10,000 rpm Table size 1100 x 760 mm Motor power 7.5 kW Control panel on top Cast iron fence jaws Bwedpsxuniysfx Acyjw Height adjustment 125 mm Extraction ports 2 x 120 mm Weight approx. 900 kg WITHOUT power feed unit The machine will be available from approx. January 2026

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, table width: 450 mm, table length: 1,530 mm, table load: 350 kg, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Bedpfxjxtbkuj Acyjww Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, The VHF 2.2 is a powerful Conventional Vertical Milling Machine from the renowned KNUTH brand, designed for versatility in Universal Milling Machines. This machine features large travels and a vertical and horizontal spindle, each with separate drives, providing robust machining capabilities. The vertical head swivels ±45° and includes a movable quill, making it ideal for various tasks in repair or training shops. It boasts a high-strength cast-iron machine bed, precision-ground guideways, and a sizable milling table setup area of 1,270x280 mm. With an automatic feed system on the X and Y axes, operators can maneuver effortlessly. The standard equipment includes an outer arbor support, coolant system, and work lamp, ensuring a comprehensive setup for efficiency and comfort. With its excellent price/performance ratio, the VHF 2.2 stands out as a precise and reliable choice in the Conventional Vertical Milling Machines category. Don't miss the opportunity to enhance your machining capabilities; request a quote today. Bsdpfeuzll Hsx Acyjww

Condition: used, Motor 6 / 7.5 kW Bedpfx Ajw Enw Iecyoww Location: Supplier

Condition: good (used), Year of construction: 1998, dia. of draw-in collets 17,5 mm internal taper of cone draw-in collets MK 1 , Mk 2, Ga speeds of grinding spindle 2800 U/min total power requirement 0,25 kW weight of the machine ca. 67 kg Bwodpfsxr Raisx Acyow dimensions of the machine ca. 510 x 565 x 290 mm Milling cutter grinder with a base cabinet for grinding milling cutters or styli in a central and offset position. The dividing head holder allows for circular movements in all directions, as well as longitudinal and transverse movements of the tool axis. The tool holder has a 40 mm longitudinal adjustment, a 10 mm lateral adjustment, and a 15 mm fine adjustment of the dividing head holder relative to the grinding spindle. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 2018, x-travel 1.800 mm y-travel 700 mm z-travel 700 mm control 840 D sl op. ( CELOS ) Siemens turning speed range - main spindle 20 - 20.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 130 / 86 Nm tool taper HSK-A63 swivellable B: +/- 100 ° table surface area 2.100 x 700 mm max. table load (1.500) kg number of T-slots 7 table diameter 750 mm Bjdpfx Aexr Racecyjww max. table load 500 kg number of T-slots 7 T-slot - distance 63 mm table height 255 mm rotatable C: 360 ° turning speeds 16 1/min resolution 0,001 ° number of toolpositions 60 pos. tool taper HSK-A63 max. tool weight 6,0 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm change-time chip to chip 7,6 sec rapid traverse ( X / Y / Z ) 40 m/min Accelaration 4 m/s² feed speeds max. 40.000 mm/min Feed force ( X / Y / Z ) 8 kN total power requirement 73 kVA weight of the machine ca. 13,7 t dimensions of the machine ca. 7,5 x 6,5 x 3,0 m 5-Axis CNC - Travel Column Milling Machine DMG MORI - DMF 180-7 - Motorspindle SpeedMaster - Swivel-Head (B-Axis) - rotary-table included in working-table - internal coolant system - Spindle, Y-axis and B-axis clamping overhauled in 04/2025

Condition: good (used), functionality: fully functional, CNC tool milling machine MIKRON WF 21 C CNC control Heidenhain TNC 155 Bjdpfx Aoxr Dy Aocyeww year of construction 1988 Technical data X: 450 mm Y: 400 mm Z: 400 mm Table size 700 x 350 mm Spindle holder ISO 40 Spindle speed 40-4000 rpm 21 steps Feed 2-3000 mm/min. Rapid traverse X and Y 6000 mm/min. Rapid traverse Z 5000 mm/min. Pinol displacement 90 mm Distance table - spindle nose max. 450 mm Main spindle drive 3.3 and 4 kW Space requirement L x W x H 3000 x 2700 x 2000 mm Weight 2400 kg

Condition: good (used), Year of construction: 1986, CNC universal milling machine Make DECKEL Type: FP5NC Bj.1986 control DIALOG 4 Traverse paths: X710mm Y600mm Z500mm Clamping table : 1000mm x 550mm Tool clamp: SK40 Feed speed programmable: 2 ... 3600 mm / min Speed: 18 ... 6300 rpm Spindle power: 7.5KW Bwodpfxsxr A A Ao Acyjw machine in stock.

Condition: excellent (used), Brand: CORREA Model CF-17 Cnc : HEIDENHAIN 360 Table size : 2000 x 700 mm Number of T-slots: 5 x 22 Distance between T-Slots: 125 mm X axis Travel : 2000 mm Y axis travel : 800 mm Z axis travel : 800 mm Rapid traverse: 12.000 mm Spindle nose: ISO 50 Diameter of front bearing : 85 mm Turning ranges : 20-2750 rpm Range : 5-5000 Spindle power : 17 kw Bwodpfx Acoxcy D Sjysw Max. Weight carrying on table : 3.500 kg Machine weight: 9.000 kg

Condition: used, Year of construction: 2004, profile grinder for cutterheads Bwjdpfx Acsxuiatsyjw

Condition: good (used), Year of construction: 2008, Spindle taper ISO 40 Longitudinal table travel/automatic 700/680 mm Cross table travel/automatic 270/250 mm Bwsdpfx Acjxuh Dkeysw Vertical table travel/automatic 440/400 mm Automatic feed, 18 steps Feed rate 15–1200 mm/min Quill stroke vertical spindle 80 mm Motor power 4 kW Dimensions 1800x1770x2043 mm Weight 2150 kg

Condition: good (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, feed length X-axis: 1,600 mm, feed length Y-axis: 700 mm, feed length Z-axis: 700 mm, rapid traverse X-axis: 6 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, position of the milling head: horizontaal/verticaal verstelbaar, spindle speed (max.): 3,000 rpm, spindle speed (min.): 400 rpm, table width: 600 mm, table load: 1,500 kg, table length: 2,000 mm, Technical specifications: Model: Kiheung Combi U6 X-axis: 1600 mm | Y-axis: 700 mm | Z-axis: 700 mm Bwsdpfx Aju Szziscysw Table dimensions: 2000 × 600 mm Spindle taper: ISO 50 | Speed: up to 3,000 rpm Feed rates: up to 6,000 mm/min Control: Heidenhain TNC 355 (2½-D CNC) Machine weight: approx. 7,000 kg | Power supply: 400 V / 50 Hz Condition: In working order, can be demonstrated. Location: Venlo, Netherlands (inspection by appointment). Price: €17,500 – negotiable Availability: Immediately, ready for loading – loading and transport can be arranged.

Condition: ready for operation (used), functionality: fully functional, BOHNER & KÖHLE (BOKO) MF1 is a reliable and precise universal milling machine, designed for a wide range of milling operations such as grooves, holes, surfaces, contours, and shaping workpieces. Thanks to its solid construction and ergonomic controls, it is suitable for workshops, repair shops, toolmaking, and small to medium-scale production. ⚙️ Technical Specifications* Model: BOKO MF1 Table size: approx. 1270 × 250 mm Travel (X / Y / Z): approx. 850 × 370 × 400 mm Bwedpfxoxdnxgo Acysw Spindle speed: 60 – 4200 rpm (stepless or step-controlled) Max. milling cutter diameter: up to ~125 mm Spindle taper: ISO 40 / R8 (depending on version) Motor power: approx. 2.2 – 3 kW Power supply: 400 V, 3-phase Weight: approx. 1200 – 1400 kg ✅ Key Features Universal design – versatile milling applications. Large working table for various workpieces. Accurate and stable performance. Solid German build quality – BOKO brand. Suitable for both workshop and industrial use. Used, in good working condition. 🎯 Applications Metalworking workshops Tool and part manufacturing Repair and maintenance shops Prototyping and small-batch production

Condition: good (used), Year of construction: 2009, with Heidenhain iTNC 530 control 18-speed milling gearbox Clamping surface 560 x 1600 mm 7 clamping slots Top width of T-slots 18 mm Distance between T-slots 80 mm Infinitely variable feed longitudinal/transverse 10 - 5000 mm/min Vertical feed 10 - 2500 mm/min Adjustable via Overdrive from 0 to 150% Rapid traverse longitudinal/transverse 10 m/min Bedpfx Acexr Aq Hjyoww Rapid traverse vertical 4 m/min Operating voltage 400 V / 50 Hz

Condition: excellent (used), Brand: CORREA Model: CF-22 PLUS Cnc: HEINDENHAIN 530 Bedpjxr A Iljfx Acyoww Table dimensions : 2.500 x 700 mm Number of slot: 5 Slot dimensions: 22 mm Axis travels (X,Y,Z) : 2.000 x 800 x 800 mm Head type : Universal manual Tool camping : Hydraulic Taper : ISO 50 (DIN 69871) Speed range : 4.000 rpm Spinale power : 22 kw Rapid feeds : 12.000 mm/min Maximum weight on table : 4.000 kg Machine dimensions : 6.605 x 3.315 x 2.730 mm Machine weight : 10 tn Machine equipped with : Fairing Chip conveyor Electronica hadwheel

Condition: used, functionality: fully functional, Metba MB1 Tool milling machine Metba MB-1 Bwodov H Ukropfx Acyow €6,900,-- / net Location: 86928 Hofstetten

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, space requirement width: 1,975 mm, space requirement length: 1,800 mm, space requirement height: 1,900 mm, Equipment: documentation/manual, Machine is in very good condition - used as a training machine until 2018; since then, the machine has hardly been in operation. Operating voltage 400 V Spindle mount ISO 40 Bwsdpfxjw U Aahj Acysw Quill stroke 100 mm Spindle speeds 63 – 3150 rpm Fixed table