Used Hot Press Steam for sale (15,884)

Condition: new, Year of construction: 2026, Production time appr. 4 months Our best-selling briquetting press series + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several hundred machines in use with satisfied customers + Good price performance ratio Throughput approx. Up to 200 kg per hour * strongly dependent on the material. - in the last test with aluminum granules smaller than 5 mm - approx. 186 kg per hour + the pressed emulsion. - in the last test with aluminum chips smaller than 18 mm - approx. 120 kg per hour + the pressed emulsion. Technical specifications: Motor: 7.5 KW + 0,55 kW Cooler 400 volts / 50 Hz / 3-phase, Front bush: 125 mm, Briquette stroke max .: 100 mm, Briquette stroke opt .: 80 mm, Pump: 80 liters, Storage container approx. 0.5 qbm content (expandable), Diameter: 1200 mm, with agitator discharge, Hydraulic unit complete with oil tank 220 liters Dimensions approx. 2095 x 1600 x 1310 mm lxwxh, Weight 1370 kg, Automatic on-off switching via level indicator CE compliant. . Nwsdpschqxxjfx Ah Hjb Requirements for the raw material: - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of magnetic metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: used, functionality: fully functional, Hydraulic guillotine shear Brand: Ajial Model: CB-630 Type: Swing beam shear Cutting length: 3,050 mm Maximum cutting thickness: 6 mm Nwodpeydvamofx Ah Hob Cutting angle: 2º Motor power: 15 HP Back gauge: 800 mm Throat depth: 400 mm

Condition: as good as new (ex-display), Year of construction: 2025, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) Demonstration machine with approx. 10 operating hours Your advantages: + Very robust, simple technology + Top price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning / established machine Including control cabinet with timer operation Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off. Technical data: Briquette dimensions: approx. 35 x 35 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity up to 25 kg / h *depending on material Machine dimensions approx. 137 x 75 x 148 cm (length x width x height), Weight of the machine: approx. 250 kg, Capacity of the silo: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: Nodpfx Ahefci D Ae Hjwb -Wood chips and dust smaller than 15 mm in length -Moisture content less than 18 % ATRO -Sand, stones, metals and minerals increase wear --- Options at extra charge: -Timer function + 490 € net Machine is started manually and switches off automatically after a set time X. -Level indicator for automatic operation + 1450 € net Press starts and then stops automatically * NEW !!! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, C7m2mgj Surcharge + 690 € net (delivery time then approx. 8 weeks) ---

Condition: used, Year of construction: 2006, ASAI 200T Die Spotting Press DSP1800M, Year 2006, Table: 1800×1200 mm, 180-degree forward flipping type. Njdoyammvepfx Ah Hewb

Condition: ready for operation (used), Year of construction: 2004, pressing force: 200 t, power: 0.045 kW (0.06 HP), Packing press 30x30 Mercury 120 year of manufacture 2004 Nwedpfx Ahsttat As Heb ready for immediate collection in 8000 Zurich, Switzerland weight: 11 tons Press is ready for use and immediately available

Condition: new, total power requirements: 11column width: 3050pressure: 125bending length: 3050number of axes: 3weight approx.: 9600messurements (LxWxH): 3660 x 1340 x 2400stroke: 200back gauge: 500table height: 900Oil tank capacity: 120 Nodpehutz Sofx Ah Hjwb Press brake control unit: Esa S 630 CNC 10 2D graphic screen - touch screen Control panel control panel: Pivoting pendant arm Optional Hydraulic Brake Brake Valve: With CE safety signals Press Brake Safety PLC : Mcs Plc Safety PLC Press Brake Laser Safety System: Dsp-Ap safety block (laser manual height adjustment) Back gauge for press brake: X axis, 500mm reach, including 2 fingers, manually adjustable height and sideways. Press brake fingers for backgauge: Standard Xf Arka Ve Yan Muhafazalar: Var (Ce'Li Model) Press Brake Upper Tool Clamping: Manual European Type L: 150mm (Promecam) Press Brake Upper Tool: Eurostamp 1260 / Standard (835 mm and 805 mm divided into 595 mm and 210 mm) Press brake die holder: Mechanical European type standard width (Promecam) CNC adjustable motorized CNC crowning (V axis) Press brake lower die: Eurostamp 2067 / Standard (835 mm and 805 mm divided into 100 mm left, 395 mm, 210 mm and 100 mm right) press brake Press brake front support: Xf Ön Destek Front support for press brake: 2 supports, manually adjustable in height and lateral position. Electrical System: 380V-660V, 50-60 Hz, 3 Ph ( I E 3 ) Cooling system for control cabinets: ventilation with fan Number of Foot Pedals: One

Condition: used, Year of construction: 2009, Extraction diameter: 250 mm Rated volumetric flow: 3534 m³/h Filter area: 22.6 m² Motor: 5.5 kW Briquetting: throughput approx.: 30 kg/h Briquette diameter: 65 mm Motor: 3.0 kW Storage location: Nattheim Nwodpfx Ajydql Dsh Hob

Condition: used, Hydraulic Horizontal Straightening Press, Horizontal Press STENHOJ Type 40 Horizontal hydraulic press for straightening work on steel beams or welded structures Serial no. 42615 Year of manufacture: 1984 Refurbished in 2025 Pressing force: 40 tons Nwsdpjydqd Hsfx Ah Hsb Ram stroke: 300 mm Piston rod diameter: 80 mm Working height: 780 mm (floor to center of piston rod) Table size without pressure pads: approx. 1000 x 290 mm Installation dimension, ram + press block to counter bearing: 260 mm (with pressure pads on ram and counter bearing) Installation dimension, ram without press block to counter bearing: 440 mm (without pressure pads on counter bearing) Height of the two adjustable pressure pads: 130 mm Pressure pad width: 220 mm Advance speed: 10 mm/s Return speed: 20 mm/s Hydraulic tank capacity: approx. 60 liters Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Cylinder stroke operated manually via an actuation lever, sensitive control via mechanical control valve - Pressing force readable via pressure gauge - Ram stroke position with actual value display, digitally readable, ideal for precise repeatability of pressure points during straightening - 2 adjustable counter bearings via threaded spindle (centric parallel adjustment from 290 to 890 mm) - Straightening tools with rounded pressure faces - Infeed rollers for material support, centrally height-adjustable via handwheel (roller width = 250 mm) Required space (L x W x H): 170 x 140 x 100 cm Weight: 1250 kg In excellent condition

Condition: good (used), functionality: fully functional, control type: CNC control, actuation type: hydraulic, controller manufacturer: Delem, controller model: DA65, bending force (max.): 300 t, working width: 4,300 mm, stroke length: 300 mm, throat depth: 450 mm, distance between stands: 3,700 mm, number of axes: 4, type of crowning: CNC-controlled, number of support arms: 2, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning Njdpfxeydpxvo Ah Hjwb - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Vemag Robot 500 + Vemag Charging head w. rotary valve and Vemag manual filling head 806. All off the equipment from 2019 and in condition like new! Nwedpfsydnrhox Ah Hsb 2x different screw set including as pictures. The machine line has previously been used for bakery dough.

Condition: good (used), Year of construction: 2012, Condition: 2012 overhauled to the latest UVV Installation height: 800 mm Njdjydlx Sopfx Ah Hjwb Ram stroke: 500 mm Projection: 360 mm Nominal force: 400 kN Hydraulic pressure: 160 bar Operating hours: 1356 Other: new control from Pilz, electrical circuit diagrams available Video about functionality available

Condition: good (used), Year of construction: 1963, stroke = 250 mm Nwsdpoydlxfefx Ah Heb

Condition: good (used), Maximum pressing force 10 tons. Working pressure 16 MPa Cylinder stroke 400 mm Nedeydlvkepfx Ah Hewb Down speed 100mm/sec Speed up to 450 mm/sec Power requirement 5.2 kW Weight 1.3 tons Clamping table changed! Not an original table!

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Safety distance: 100mm Nwjdpfx Ahoydlutj Heb Post-travel: max. 10 mm Motor power: 3 kW

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Nwsdpfx Ajydkgnjh Hjb Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: refurbished (used), HYDRAULIC HOT PLATE PRESS, MODEL LS/L/R 30/13 SP. 150 mm Composition - LOADER - HYDRAULIC PRESS WITH HOT PLATENS, MODEL LS/L/R 30/13 SP. 150 mm - 3000x1300 mm HOT PLATE ROLLERS UNLOADER Press platen dimensions 3000x1300 mm. Press plungers No. 6 Ø 70 mm stroke 200 mm. Press platen thrust 70 t. Nedsn R Dihepfx Ah Hswb

Condition: excellent (used), Xerox Iridesse Including: - OHCF (Oversized High Capacity Feeder) - Finisher for PFIM (without booklet-making functionality) Nwjdpfx Aoydkcpeh Hob - PFIM (Post Fuser Insertion Module) - EFI Fiery EX-P 6 (DFE – Digital Front End) - 6 Colours (including standard 4 colors: CMYK plus specialty dry inks) - Total counter: 5.5 million (For detailed meter readings, see photos) The Xerox Iridesse Production Press is a high-end digital color press designed for ultra-high-definition printing with specialty dry inks. Key product specifications: Print Speed: 120 pages per minute (ppm) for 8.5" x 11" or A4 paper size. Paper Weight Range: Supports media from 52 to 400 gsm (grams per square meter). Resolution: Ultra HD, with RIP resolution at 1200 x 1200 dpi, 10-bit; print resolution at 2400 x 2400 dpi, 1-bit. Monthly Duty Cycle: Up to 2,250,000 impressions per month. Average monthly image volume (AMIV): 225,000–475,000 impressions. Color Capability: 6-color print engine, standard CMYK plus up to two specialty dry inks (gold, silver, clear, or white). Dimensions: Approx. 4,135 mm (W) x 1,835 mm (H) x 1,114 mm (D) / 163" x 72" x 44". Toner: Uses High Definition EA (Emulsion Aggregation) toner. This press is ideal for premium commercial print jobs requiring metallic or clear effects in addition to traditional CMYK colors, making it a versatile solution for creative and high-impact prints.

Year of construction: 1974, condition: used, Please contact ATS Norway for more information Nwsdpfjydhv Hox Ah Hob Please provide reference number upon request: 22258 Specifications: 1974 model Hour meter is not accurate Used for bending steel plates Fully operational, but has a small leak on one cylinder Ready for delivery

Condition: used, Year of construction: 1996, Press dimensions: 2550 x 1350 mm Plates: Gold anodized Total pressing force: 80 t Specific pressing pressure: 2.8 - 4.0 kg/cm² Hydraulic cylinders: 4 x 90 mm Opening width and press stroke: 400 mm Safety pull cord Safety frame Button control Total connected load: 19.3 kW Storage location: Supplier Nodpfx Ajxy Tl Rsh Howb

Condition: ready for operation (used), controller manufacturer: 2D Touch, throat depth: 330 mm, installation height: 500 mm, operating speed: 8 mm/s, reverse speed: 100 mm/s, total length: 6,500 mm, total width: 1,980 mm, total height: 3,700 mm, power: 22.5 kW (30.59 HP), travel distance Z-axis: 250 mm, empty load weight: 33,000 kg, passage width: 5,050 mm, 5 assen: Y1 / Y2 / X / Z1 - Z2 synchroon / V Nwjdpfx Ajydf Hceh Hsb bovenste hydraulische klemming CNC-bombering capaciteit: 220 ton per meter laserkluisbeveiliging Capacity: 320 ton x 6100 mm Backgauge: CNC Locking speed: 80 mm/sec

Condition: excellent (used), Year of construction: 1952, Robust workshop machine with character – manufactured in the renowned German factory A. Nothelfer & Söhne Ravensburg. Year of manufacture: 1952, but still fully operational, complete, and ready to work! - Siemens-Schuckert Motor • Power: 0.8 kW • Speed: 1,400 rpm • Power supply: 3-phase 220/380V • Current: 3.5/2 A • Frequency: 50 Hz • Cos φ: 0.8 - Technical condition • Fully mechanically operational • Belt drive with three-phase motor • New supporting frame with mounting holes • Foot pedal control • Electrical inspection recommended (older visible power system) - Additional information • Original nameplates Nwjdsw E I Sfspfx Ah Hjb • Type designation illegible, but identified by factory serial number 134058 • Work table with slots for fixture mounting • Solid, heavy construction – built for decades of use • Weight: 480 kg - Applications: stamping, punching, cutting, bending metal parts – ideal for the workshop, forge, tool production, or for an industrial machinery collection.

Condition: like new (used), Year of construction: 2007, machine/vehicle number: 31652, pressing force: 80 t, Year 2007 Serial 31652 6 Axis Laser safe Upper attachment Wila hydraulic Lower attachment LVD hydraulic Software : CADMAN-B Nwjdpfevcc Eijx Ah Hjb

Condition: used, Year of construction: 2010, Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical data  Capacity: 39,000 bottles per hour (bph) Bottle Formats: 1.5 L Worked Labels: IN REEL two label applicators  Reel Change: Automated Run Time: Approx. 55,000 hours Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Protection Class: IP 54 (main panel and motors) Working Conditions: 5-40 °C, 30-80% humidity, up to 1000 m altitude, no explosive atmosphere working direction: left-right/clockwise  bottle infeed/outfeed parallel on one side of the machine Nodpfx Ahjydctyj Hjwb

Condition: ready for operation (used), Year of construction: 1991, Press force: 60 t Max. working width: 2550 mm Clear distance between uprights: 2550 mm For sheets (at full working width) up to: Throat depth: 250 mm Bending speed: 75 mm/s Return speed: 95 mm/s Backgauge adjustment: 500 mm Hydraulic drive: 380 V, 4 kW Nsdpfeyda Uzox Ah Howb Space required: 2920 x 1350 x 2250 mm Weight: 4.7 t Control: CYBELEC

Condition: used, This unicraft hydraulic workshop press, model: WPP 50 E, is being auctioned online in our industrial auction / machinery auction for the closure of Hofer Getriebetechnik – workshop equipment, lifting platforms, tools, machines, forklifts, office furniture, metal cabinets. You will find this and many other items on our platform. Nsdpfxoydaqcs Ah Hjwb