Used Hot Plate for sale (25,900)

Condition: good (used), Year of construction: 1975, Manufacturer: Sagita – Beyeler License Model: 2550 × 10 (Sheet length × Cutting thickness) Cutting length: approx. 2520 mm (effective) Max. cutting thickness (steel): ~10 mm Backgauge: approx. 750 mm, motorized adjustment Ijdpfx Afsw Ecwcsieih Blade gap adjustment: manually adjustable Space requirements: with table supports: 3,200 × 2,800 × 1,600 mm transport-ready: 3,200 × 2,150 × 1,600 mm Weight: approx. 6,300 kg

Condition: used, Electro sinus magnetic chuck, sinus magnet, E-sinus magnetic clamping plate BRAILLON type BJP. Length: 350 mm, width: 150 mm, height: 110 mm. Connection: 110 Volt DC. Power: 0.65 Amp. The magnet is tiltable up to 90° and features a sine table base. Net weight: 45.8 kg. Ijdpjxcimcefx Afijih

Condition: new, sheet width 2050 mm plate thickness 3 mm strokes per minute until 35 cutting angle 2,0 ° table height over floor 870 mm thickness at "Niro-steel" 2 mm total power requirement 4 kW weight of the machine ca. 1550 kg range L-W-H 2,5 x 1,57 x 1,21 m The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Iedpfjvdfmxox Afijih Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, Travel paths Longitudinal movement (X-axis): 5,500 mm Vertical movement (Y-axis): 3,200 mm Spindle movement (Z-axis): 600 mm RAM/Outrigger movement (W-axis): 600 mm Feed rates X, Y, and Z axes: 2,800 mm/min Spindle unit Spindle power: 37 kW Boring spindle diameter: Ø 125 mm Spindle sleeve diameter: Ø 240 mm Spindle taper: SK50 Number of gear stages: 4 Spindle speed range: 3–700 rpm Faceplate diameter: Ø 1,000 mm Faceplate speed range: 1–82 rpm Gear stages Stage I: 3–33 rpm Stage II: 30–85 rpm Stage III: 88–247 rpm Stage IV: 250–700 rpm Connection data Operating voltage: 3 × 400 V Mains frequency: 50 Hz Total connected load: 80 kW Dimensions and weight Machine footprint: approx. 8 × 5 m Total height: approx. 5.5 m Machine weight: approx. 50,000 kg Features and accessories Robust, flat-bed horizontal boring mill in moving column design, in very good condition Retrofit including electrical system in 2014 Refurbished control panel with Heidenhain digital readout Coolant tank with belt filtration system, high and low pressure pumps Counterweight for weight compensation Isdexn Al Aopfx Afioih Conventional control Thread cutting device with change gears Axis drives via intermediate gearbox Swiveling control panel for operation from the front or rear of the machine Telescopic steel cover for X-axis Scope of delivery excludes foundation plates and rotary table Chip conveyor included in delivery

Condition: good (used), Clamping plate, marking-out, welding table, welding table, straightening plate, marking-out plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2000 x 1515 mm -Table height: 800 mm -Plate thickness: 130 mm -Transport dimensions: 2000/1515/H800 mm -Weight: 3250 kg Iijdpfexnxnmox Afijh

Condition: new, Year of construction: 2025, TBS - Manual plate shears Manual plate shears Iiodpfx Ajcnxc Refish Suitable for cutting mild steel, aluminium, copper, zinc, plastics High quality cutting blades made of steel with a hardness of HRC55-60 Equipped with two operating handles With front support surface with scale and adjustable back gauge 800 mm table height Scope of delivery: 2 operating handles Model TBS 2000-12 Article no. 3746020 Technical data working width max. 2000 mm sheet thickness max. - material tensile strength 400N/qmm 1,25 mm backgauge range 0-300 mm weight 511 kg Dimension in mm 2450 x 1100 x 1050 mm

Condition: good (used), Very stable cast iron clamping table with 7 T-slots Dimensions : 1000 x 1000 x 840 mm Thickness of the cast plate incl. ribbing at the bottom approx. 130 mm Was probably originally a machine table T-slots: opening width at top approx. 25 mm Groove width at bottom approx. 43 mm Sturdy substructure with doors and two shelves Iiedpsxnqxkjfx Afijh Condition : Surface hardly damaged ! Grooves not broken out

Condition: good (used), Year of construction: 2021, 1 used motorized plate bending roll Manufacturer: Akyapak Model: ASM 140-12/5 Year of manufacture: 2021 Technical specifications Sheet width: 1250 mm Sheet thickness: 5.5 mm Pre-bending: 5.0 mm Roll length: 1280 mm Minimum diameter: 210 mm Top roll diameter: 140 mm Weight: 1365 kg Dimensions (LxWxH): 2,020 x 900 x 1,200 mm Standard equipment: – Central rolls driven by electric motor, planetary gearbox, and gear drive – Side-opening top roll – Main motor with brake system Isdpfx Aexnpwxofisih – Cone bending device – Mobile control panel and foot pedal – CE mark / Declaration of Conformity

Condition: new, Year of construction: 2019, sheet width 2050 mm plate thickness 2 mm strokes per minute until 38 cutting angle 1,75 ° table height over floor 870 mm total power requirement 3 kW weight of the machine ca. 1520 kg range L-W-H 2,2 x 0,6 x 1,2 m Demo machine at a special price: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Ijdpfx Afsvn Al Hjieih Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille. Plus freight + packaging 270,--. This is a demonstration machine at a special price, so we are selling it without any warranty. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².

Condition: excellent (used), functionality: fully functional, Year of construction: 1993, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 280 mm, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 4,050 mm, working width: 4,000 mm, working height: 1,100 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, overall weight: 11,000 kg, total length: 6,000 mm, total width: 1,450 mm, total height: 1,510 mm, power: 11.03 kW (15.00 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, hardened rollers, 3 roll 4000x8 mm Plate bending machine with pre-pinch Model Famar CPI4/6 CAPACITY plate width 4000 mm plate thickness 8 mm pre-bending 6 mm --- Useful rollers width 4050 mm Top roll d 300 mm Side rollers D 280 mm hardened surface of the 3 rolls position readout of the bending rollers Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on rollers for profile bending Variable speed rolling up to 5 mtr/min power electric motor 15Hp on hydraulic unit Isdpfxoxnmb Ie Afieih 15Hp-Voltage 380/50 safety installations with emergency stop dimension 6000x1450 x H 1510 weight 11 Ton

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table Iedsxnwbljpfx Afieih -Clamping plate: on solid base frame -Clamping surface: 2100 x 1200 mm -Table height: 740 mm -Plate thickness: 130 mm -Transport dimensions: 2100/1200/H740 mm -Weight: 2400 kg

Year of construction: 2025, condition: new, NEW - - Ideal for removing plates from your standing plate storage. - For in-plant transport of the plates to the Iedpfx Aed Tyaajfisih standing or lying panel dividing saw. - The steplessly height-adjustable support surface can be exactly to the height of your panel saw. height of your panel saw. - Panels weighing up to max. 250 kg can be transported or transported or swiveled by one operator alone. Technical data: Support height - standing: approx. 120 - 340 mm - lying: approx. 890 - 1200 mm max. plate size: 5200 × 2100 mm load capacity: 250 kg Location: ex stock 54634 Bitburg - immediately available- Will be shipped for 90,- Euro net within Germany

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, Sahinler round bending machine type IRM 2050x110 working width 2050 mm Iisdpfsxnc N Uox Afioh max sheet thickness 3.0 mm roller diameter 110 mm motor driven

Year of construction: 2000, condition: used, Serial number: 33500xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21274 Specifications: Weight: 510 kg 9.5 kW Year: 2000 model Ready for delivery Works as it should Iisdpfxsxatn Ee Afieh Own weight: 510 Model: Vibroplate

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 1873, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 1,250 rpm, spindle diameter: 50 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid commits you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 400 mm Travel range Z-axis: 1,000 mm Max. spindle speed: 1,250 rpm Spindle diameter: 50 mm Table dimensions: 1,550 x 980 mm With T-slots: 6 MACHINE DETAILS Electrical data Operating voltage: 380 V Rated current: 33.1 A Frequency: 50 Hz Dimensions & Weight Iijdpfoxm S N Ijx Afioh Dimensions (L x W x H): 4,500 x 1,600 x 2,500 mm Total weight: 8,000 kg EQUIPMENT Chuck Various suitable accessories

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, overall weight: 370 kg, pressure: 10 bar, operating pressure: 10 bar, temperature: 110 °C, power: 1,300 kW (1,767.51 HP), heating capacity: 1,300 kW (1,767.51 HP), Plate heat exchanger ALFA LAVAL M10 MFM 11.5lit 7.9nm2 1300kw ALFA LAVAL M10 MFM plate heat exchanger /ct2227/ Manufacturer: ALFA LAVAL M10 MFM Serial number: 30106-07882 Year of manufacture: 2007 Nominal power: ca:1300kw Heat transfer surface:7.8nm2 Width: 480mm Iodpfx Asxppidsfisih Height: 1090mm Connection height: mm Width:800cm Pipe connection DN100 4x Capacity: Primary: 11.5Liter Secondary:11.5Liter Max pressure: 10bar Test pressure 13 bar Nominal temperature: 0-90 °C Weight: ca 340kg

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: surface plate with adjustable feet -Length: 2000 mm -Width: 1515 mm -Plate thickness: 130 mm -Adjustable feet: Ø 300 x 670 mm -Transport dimensions: 2000/1515/H430 mm Iiodpfx Afexnv Ikoieh -Weight: 3150 kg

Condition: good (used), Year of construction: 2005, Marking and surface plate 1000 x 1000 with base frame Location: from stock 54634 Bitburg - available immediately - Iisdjwqx Axjpfx Afish

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20721 Specifications: S70 mount, but a little wider For excavator Works as it should Weight: 645 kg 172 Bar Ready for delivery Isdpfjwrl T Tex Afieih

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table Iiodpfsxm Sagsx Afieh -Clamping plate: on a solid base frame, with vice -Clamping surface: 2000 x 1000 mm -Table height: 925 mm -Plate thickness: 115 mm -Vice: clamping jaws: 150 x 30 mm clamping width 250 mm -Transport dimensions: 2480/1000/H1110 mm -Weight: 1850 kg

Condition: excellent (used), Year of construction: 1995, Schroeder HS 2000/1.0 Manual Guillotine Shear Specifications: Manufacturer: Schröder Model: HS 2000/1.0 Year of Manufacture: 1995 Working Length: 2000 mm Cutting Thickness: 1.25 mm Iedewhf Ntepfx Afioih Collecting Tray Rear Paralleling Device via Handwheel Location: Arrives at Warehouse 54634 Bitburg - Available at Short Notice -

Year of construction: 2018, condition: used, Serial number: 1302xxxx Iiedpfjvgzv Iox Afioh Please contact ATS Norway for more information Please provide reference number upon request: 19196 Description: Ammann 538 kg vibrating plate for sale. It has stood for less than a year since it was new and not used at all. Everything must work as it should Ready for delivery.

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2000 x 1200 mm -Table height: 735 mm -Plate thickness: 125 mm -Transport dimensions: 2000/1400/H735 mm Iodpfx Afoxm R S Ueisih -Weight: 2220 kg

Condition: good (used), Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, -T-slot plate: clamping plate with T-slots, for hydraulic press, eccentric press... -Clamping surface: 630 x 500 mm -Inner diameter: 180 mm -Plate height: 75 mm -Groove width: 19 mm -Dimensions: see drawing in the photos Iijdoxm R Ipopfx Afieh -Dimensions total: 630/500/H75 mm -Weight: 162 kg

Condition: good (used), Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, -T-slot plate: clamping plate with T-slots for hydraulic press, eccentric press -Clamping surface: 705 x 484 mm -Inner diameter: 250/220 mm -Plate height: 65 mm -Groove width: 22 mm -Dimensions: see drawing in the photos -Dimensions total: 705/484/H65 mm Iisdpfotnlz Hox Afish -Weight: 147 kg