Used Hot Laminatio Machine for sale (66,617)

Condition: excellent (used), Shot blasting machine, continuous blasting machine, wear plates, blast wheel discs -Spare and wear parts: for shot peening system continuous blasting system Kjdpfx Ahewaiv Uovoww -Baffle plates: 02122 V105 7 pieces dimensions 390/125/H145 mm / 11.7 kg/piece. -Baffle plates: C1315 N517 2 pieces dimensions 480/140/H175 mm / 15 kg/piece. -Spinning wheel discs: 02122 V105 16 pieces, dimensions 350 x 80 mm / 112.5 kg/total. -Accelerator gears: 4 pcs. Ø 250 x 320 mm / 27 kg/pc. -Conveyor shafts: 3 pieces Ø 80 x 1640 mm / 40 kg/piece -Shipping/Price: complete -Total weight: 452.4 kg

Condition: like new (used), Year of construction: 2021, operating hours: 200 h, functionality: unexamined, machine/vehicle number: S/ NOS : 248534, 248535, 248536, clamping force: 3,800 kN, screw diameter: 60 mm, displacement volume: 877 cm³, injection weight: 300 g, ejector stroke: 210 mm, plate length: 1,140 mm, plate width: 1,140 mm, overall weight: 20,400 kg, type of input current: three-phase, input frequency: 60 Hz, input voltage: 480 V, year of last overhaul: 2024, number of digital displays: 1, Equipment: CE marking, documentation/manual, unit sold as is where is Two colors injection molding machine (two shots) Three machines available , price is per machine Manf. : Engel Austria Model : e-Motion 740H / 50MV / 420 T Combi US S/ NOS : 248534, 248535, 248536 Year Built : 12/2021 Condition : very good Material : THERMOPLAST Clamping Force : 420 Ton Injection Unit 1 : 740/. H-arrangement Injection Unit 2 : 50/. MV-arrangement Kwsdex Szwhopfx Ahvsw Machine Net W : 20 400 Kg Gross Dim of crate : 23’ x 8’ 10” x 9’ 7” (H) Capacity : 427 Ton Shot Size : 10.2 oz Second Shot Size : 0.45 oz Tie Bar Spacing : 30.7" x 30.7" Platen Size : 44.89" x 44.89" Min /Max Mold Height : 45.3"/61" Clamp Stroke : 27.55" Ejector Stroke : 8.26" Control : CC300 Voltage : 480 Min/Max Mold Height : 43.3" - 61.02" 2-Shot Injection Molding Press Main Injection Unit: 10.2 oz (45mm) Secondary Vertical Injection Unit: .45 oz. (18mm) Core Pull Pneumatic Valve Gate Including: Engel Viper Robot

Condition: new, Year of construction: 2025, Dump belt blast wheel blast machine 11 kW direct drive indexing turbine with 8 throwing blades. Belt width 1000mm and Ø900mm Ksdpfxehvikus Ahvoww

Condition: new, Year of construction: 2025, Blast wheel rotary table installation D = 1500 mm 2 x 7, 5kW spin wheels Questions about technical specifications, etc. contact us in writing or by telephone. Kjdpedtq Anjfx Ahvoww Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.

Condition: new, Year of construction: 2026, Dump belt blast wheel blast machine 7,5 kW direct driven indexing turbine with 8 throwing blades. Belt width 700mm and Ø600mm Ksdpfog S Rt Eex Ahvsww

Condition: new, Product description: Casting, forging, pressing, heat treatment, finished product, semi-finished product, steel fabrication etc. It is preferred for surface cleaning, pre-coating preparation or revision works. Its distinct advantages are that it enables versatile sandblasting, and that large and small parts with irregular geometry can be sandblasted. With the help of the digital clock we use in our machines, the sandblasting time can be adjusted according to the part type and desired sandblasting surface. Casting sandblasting, forging sandblasting, press - heat treatment workpieces sandblasting, finished product sandblasting, semi-finished sandblasting, steel fabrication sandblasting, etc. used in transactions. Ksdpsgha A Sjfx Ahvjww The machine is designed and manufactured according to the size, weight and daily number of the parts to be sandblasted. It can be designed as a continuous system upon request and can be included in the paint line.

Year of construction: 2025, condition: new, ASK - 0 Hanger Type Shot Blasting Machine; It is used for polishing sheet and metal parts which have come out of press and heat treatment, cleaning and roughening of castings, preparation before paint and rubber coating, taking forging parts to canvases and revision of old parts. Kwsdpfx Ajvkf Agehvew (Quantity x Diameter): Ø: 800 H: 700 has 2 turbine x Ø 325mm with 6 blades The cabin is made of ST-37 sheet metal and the hot pot area is supported by Brinell or Manganese wear plate. The interior of the cabinet is covered with a rubber sheet to prevent it from being exposed to abrasion due to the sandblasting process. Rubber sheets are fixed to the cabinet with moldings. (Coating with a complete manganese armor is optionally offered to our customers.) The wear plate cladding is screw-in design for future wear-based replacements. It can be easily changed by authorized personnel in your company. Although the cabin door can be pneumatic or manual, it is designed as a winged system and 2 pieces. The cabinet door has a lock system to prevent it from being opened during the blasting process. In addition, there is a sensor or switch on the cabinet that stops sandblasting when the door is open. The system consisting of rail line, suspension gear system and crane (optional) is designed to allow the material to be sanded to move easily inside the machine. Full automation panel is available. Panel materials are Siemens / Schineider brand. Machine control is provided with a 10” PLC screen.

Year of construction: 2025, condition: new, Pipe Shot Blasting Machine A pipe shot blasting machine is a specialized surface treatment system designed for cleaning, roughening, or preparing the inner or outer surfaces of cylindrical (pipe-shaped) metal parts. It removes rust, oxide, scale, burrs, and old paint coatings using high-speed abrasive blasting (with steel shots, grit, or sand). ⚙️ Working Principle Loading: Pipes are placed on a roller or conveyor system for easy movement. Transportation: The pipes are automatically conveyed into the blasting chamber via a roller conveyor or continuous feed line. Blasting Process: Kwjdjxuhrbopfx Ahvjw Inside the chamber, high-speed turbines throw steel shots or abrasive material onto the pipe’s surface. During the process, the pipe rotates and moves forward, ensuring uniform cleaning across the entire surface. Cleaning and Recovery: The used abrasive is automatically collected, filtered, and reused. Dust and impurities are removed through an industrial dust extraction and filtration system. CODE DIMENSIONS TURBINE CBK - 1 Ø 48 – 219 2 x Ø 320 CBK - 2 Ø 219 – 500 2 x Ø 320 CBK - 3 Ø 500 – 1000 2 x Ø 500 CBK - 4 Ø 1000 – 2000 2 x Ø 500

Year of construction: 2025, condition: new, Overhead Continuous Shot Blasting Machine? An overhead continuous shot blasting machine is an automatic surface cleaning system used mainly for removing rust, scale, paint, or other impurities from metal surfaces. Kwodpfoxuhf Ijx Ahvsw In this system, the workpieces are suspended from an overhead conveyor line and pass continuously through a blasting chamber, ensuring high productivity and consistent quality. ⚙️ Working Principle Loading: The parts are hung on rotating hooks or hangers attached to an overhead conveyor line. Transportation: The conveyor automatically carries the parts into the blasting chamber. Blasting Process: Inside the chamber, high-speed turbines throw steel shots or abrasive media onto the surface of the parts. This removes rust, scale, burrs, and old paint layers, leaving a clean, roughened surface. Rotation of the Hanger: The hooks or hangers usually rotate to ensure that all surfaces of the part are evenly blasted. Discharge and Recovery: After blasting, the parts exit the chamber. The used abrasive is collected and recycled, while dust is filtered through an efficient dust collection system. CODE W: x H: Turbine ASK-KON - 1 1.000 x 1.000 4 x F400 ASK-KON - 2 1.000 x 1.500 6 x F400 ASK-KON - 3 1.000 x 2.000 8 x F400 ASK-KON - 4 1.500 x 3.000 12 x F400 ASK-KON - 5 1.500 x 4.000 12 x F500

Year of construction: 2023, condition: new, Machine height : ~4300mm Machine width : ~3400mm Machine length : ~3400mm Kwsdpfx Aji D Digshvow Maximum work piece height : 1400mm Maximum hook capacity : 2 x 500 kg Number of blast wheels : 2 x 7.5kW E-Eco Frequency inverter for turbine : 2 pcs Blasting time : Adjustable PLC : Siemens S7 1200 + TP 4'' Modem : 1 pc Safety fance with fotocell : Yes Automatic abrasive filling : Da Filter : PC4 (4.000m3/h) Total installed power : ~21kW This type of machine has all the electric cables on quick connectors, you only need three days and 2 mechanics.to prepare it for work. The machine is on stock. A test of the machine in our premises is possible with prior notice

Condition: ready for operation (used), Technical characteristics Gooseneck : 650 mm Veneer thickness : 0.4 to 2 mm Feed speed 9 m/min Total electrical power 0.18 kW (0.2 HP) Power and Motors Kwsdpfstx Hx Aex Ahvjw Voltage: 220 V Pluging: Singlephased Power: 0,18 Kw Overall dimensions

Year of construction: 2025, condition: new, Drum Shot Blasting Machine; The system consists of a Cabin, Turbine System, Recycling System, Filtration System, Control Panel, Platform, Hydraulic Loading-Unloading Unit, and Vibrating Screen. Shot blasting is performed by having a rubber belt wound over three drums rotate the virtual barrel-shaped chamber while the turbine propels steel shot onto the workpieces. The blasting cabin is manufactured from ST-37 steel plate. Areas directly targeted by turbines (hot points) are reinforced with manganese wear-resistant plates, while other areas are supported with Hardox plates. (Complete manganese plate cladding is optional.) Kjdevliucjpfx Ahvsww Wear-resistant claddings are designed with bolts to facilitate future part replacements due to wear. Replacement can easily be carried out by your company's authorized personnel. The wear-resistant plates are bolted for easy future servicing. Dimensions of the TK - 6 PREMIUM machine: Drum diameter Ø: 1000 mm, Length between discs L: 1200 mm, with a loading capacity of 800 kg. Turbine specifications: 2 x F300 model Ø 320 mm, 7.5 kW motors. Equipped with a rubber belt conveyor.

Condition: like new (used), functionality: fully functional, machine/vehicle number: 27324-1/1, input voltage: 400 V, Shot Blasting Machine Parts Kedpfx Aowrp Nfshvoww Three new Gostol tst turbines for shot blasting machines/surface treatment of metal elements.

Condition: excellent (used), Year of construction: 2017, We offer a table shot blasting machine TZS 1 Manufacturer: KOVO Staněk Table diameter: 1,100 mm Kjdpfx Ajwurhiohvoww Year of manufacture: 2017 Weight: 2,500 kg Very good condition.

Condition: used, functionality: fully functional, compressed air connection: 4 bar, inner dimension width: 800 mm, inner dimension length: 800 mm, inner dimension height: 1,200 mm, workpiece weight (max.): 500 kg, For sale: used overhead rail shot blasting machine from manufacturer Berger. Good used condition appropriate for its age. 2 blast wheels, connected load approx. 30 kW. Internal lining made of manganese steel. Bucket elevator belt has been replaced. Central lubrication. Circuit diagram and operating manual available. Machine can be inspected under power at location, 66802 Überherrn. Kjdpfx Ajwphb Uohvoww

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine CM S 3370 Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Mechanical and electrical systems have been completely refurbished to specification: Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits Kedpfxsxqzmke Ahveww The machine is fully operational and available for immediate sale. The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1902038, grinding length: 1,000 mm, grinding width: 500 mm, total height: 400 mm, The machine is working perfectly, currently the system is not in operation. Kedpfx Aovyf H Rehvjww

Condition: used, Year of construction: 2014, Technical details: max. turning diameter: 350 mm turning length: 540 mm control: 0i-TD swing dia.: 510 mm bar material dia.: 66 mm spindle bore diameter: 76 mm travel -x axis: 200 mm travel -z axis: 560 mm Spindle 1 RPM: 4000 1/min Spindle 1 Power: 18,5 kW turret stations / rotary tool stations: 12/0 BMT 55 Rapid traverse feeds x/z: 24/ 24 m/min tailstock quill taper MT: MK4 (Live) Tailstock Travel: 490 mm Ksdpfx Ahjyv Erdoveww tailstock quill stroke: 80 mm tailstock quill diameter: 75 mm dimensions of the machine ca.: 3500 x 1400 x 1850 mm total power requirement: 32 kW weight of the machine ca.: 4 t Accerories Chip conveyor Parts catcher Spindle 1 Chuck 200 mm manual tool eye Samsung turning center in excellent condition with rotary tools, y-axis and subspindle for complete manufacturing of components. *

Condition: used, Year of construction: 2015, Technical details: max. turning diameter: 350 mm turning length: 540 mm control: 0i-TD swing dia.: 510 mm bar material dia.: 52 (66) mm spindle bore diameter: 61 (76) mm travel -x axis: 200 mm travel -z axis: 560 mm Spindle 1 RPM: 4000 1/min Spindle 1 Power: 18,5 kW turret stations / rotary tool stations: 12/12 BMT 55 Power rotary tools: 3,7 /2,2 kW RPM of rotary tools: 6000 1/min torque rotary tools: 26,2 Rapid traverse feeds x/z: 24/ 24 m/min tailstock quill taper MT: MK4 (Live) Tailstock Travel: 400 mm tailstock quill stroke: 80 mm tailstock quill diameter: 75 mm dimensions of the machine ca.: 3500 x 1400 x 1850 mm Kjdsyv En Sepfx Ahvjww total power requirement: 32 kW weight of the machine ca.: 4 t Accerories Chip conveyor Parts catcher Spindle 1 Chuck 200 mm manual tool eye Samsung turning center in excellent condition with rotary tools, y-axis and subspindle for complete manufacturing of components. *

Condition: new, Year of construction: 2026, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: 1. Portable Sand Making Machine: - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. - Consider modular screening units that are easy to transport and set up. 3. Conveyor Systems: - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. 7. Control System: - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. - Consider automation features that enhance control and reduce the need for constant manual intervention. 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. Kedpfx Ajq N Ud Ijhvoww - Explore environmentally friendly features to align with sustainability goals. 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Condition: not inspected (used), Year of construction: 2014, machine/vehicle number: 12097, CNC Milling Machine XYZ SMX3500 The machine is in very well-maintained condition. ● Condition: Not inspected ● Delivery terms: Free on truck (FOT) ● Location: 42477 Radevormwald, Germany ● Availability: By arrangement – Collection date for the item is set for 06.05.2026. Unfortunately, collection outside of this timeframe cannot be accommodated. ● Payment terms: Advance payment by bank transfer ● Internal ID: DÄ10 ● Power-on demonstration possible: Yes Technical specifications: ● Control: PROTO TRAK SMX ● Table dimensions: 1200 x 300 mm ● Spindle speed: 5,000 rpm ● Main drive power: 3.75 kW Kwedpfsyvi Enox Ahvjw ● 400 V ● 50 Hz Scope of delivery: ● Available manuals (completeness not guaranteed) ● Hoffmann vice, jaw width: 125 mm ● Machine lamp Dimensions & weights: ● Installation dimensions (L x W x H approx.): 2000 x 2000 x 2500 mm ● Weight approx.: 2,500 kg If you have any questions or would like to arrange an inspection, please feel free to contact us! Additional notes: ► On request, we can offer transport to the destination ► The quoted price is net, plus VAT ► The goods are sold under exclusion of any warranty ► Technical data provided without guarantee ► Subject to prior sale ❗Sale of the item is exclusively to businesses❗

Condition: not inspected (used), Year of construction: 2014, machine/vehicle number: SL375, CNC Lathe XYZ SLX355 ● Condition: Unchecked ● Delivery terms: Free loaded on truck Kjdpfjyvi A Tsx Ahvsww ● Location: 42477 Radevormwald, Germany ● Availability: By arrangement – The pickup period for the equipment is set for 06/05/2026 and 07/05/2026. Unfortunately, collection outside this timeframe cannot be accommodated. ● Payment terms: Advance payment – by bank transfer ● Internal reference number: DÄ5 ● Inspection under power: Yes Technical specifications: ● Control system: PROTO TRAK SLX ● Drive power: 5.5 kW ● Spindle speed: max. 4000 rpm ● Turning length approx.: 750 mm ● Swing over bed approx.: 400 mm ● Swing over cross slide approx.: 180-200 mm Equipment: ● Three-jaw chuck (diameter: 200 mm) ● Tailstock ● Quick-change tool post Scope of delivery: ● Available manuals ● Set of quick-change tool holders with turning tools ● Four-jaw chuck (Röhm, diameter: 160 mm) ● Toolbox with accessories as shown in the images Dimensions & weight: ● Footprint (L x W x H) approx.: 2300 x 1400 x 1900 mm ● Weight approx.: 2000 kg If you have any questions or wish to arrange an inspection, please do not hesitate to contact us! Additional notes: ►Transport to the destination can be offered upon request ►The offer price is net plus VAT ►The equipment is sold with exclusion of any warranty ►Technical data provided without guarantee ►Subject to prior sale ❗Sale exclusively to business customers❗

Condition: used, Year of construction: 1995, functionality: limited functionality, bar diameter (max.): 75 mm, cnc old machine spindle hole 75 mm Ksdpfjyv Uplsx Ahveww

Condition: good (used), Laminating Machine Komfi Delta 76 Stacker Kwodpfoyur Nlsx Ahvew Manufactured in 2016/2017. The machine is 100% operational and ready for operation. This is an advanced, high-performance machine, ideal for commercial laminating. The machine is in very good condition and ready for production. Technical specifications: Max sheet size: 760mm x 1120mm Min sheet size: 300mm x 220mm Min grammage: 115 gsm Max grammage: 600 gsm Operating temperature: 80-145°C Max operating speed: 35m/min Built-in Becker compressor Weight: 2800kg 380V power supply Additional air supply: 6 bar Power consumption: 18kW Pneumatic clamping, separation, and automatic feeding from a high stack, automatic stacker. Touch panel for easy operation. Sheet straightening module. Tool kit and foil included.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Kodpfx Aoxdmgvohveww Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm