Used Horizontal Surface Grinding Machine for sale (67,550)

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € 350 mm 300 mm 500x160 mm 350x150 mm 300x150x55 mm 2800 1/min 3,6 kW 1020 mm 820 mm 2170 mm 440 kg Dm. 200x78x78 mm This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, Nkodpfx Ajywcl Rjhvsw with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: not inspected (used), Year of construction: 1993, machine/vehicle number: 101472, ● Terms of delivery: Free loaded onto truck ● Location: 42477 Radevormwald ● Availability: By arrangement – Collection of the goods is scheduled for 06/05/2026. Unfortunately, collection outside this period cannot be considered. ● Payment terms: Advance payment by bank transfer ● Internal no.: DÄ27 ● Inspection under power: Yes Technical data: ● Magnetic chuck approx.: 500 x 250 mm ● Grinding length approx.: 600 mm ● Grinding width approx.: 250 mm ● Grinding height approx.: 500 mm Scope of delivery: ● Various grinding wheels as per pictures Dimensions & weights: ● Installation dimensions L x W x H approx.: 2200 x 1700 x 2000 mm ● Weight approx.: 1500 kg Info: There is a small chipped area on the lower handwheel; however, this does not affect functionality. If you have any questions or would like to arrange a viewing, please feel free to contact us! Additional notes: ►Transport to the destination can be offered upon request Nkedpfx Aoyv Hdujhvew ►The offer price is net plus VAT ►The goods are sold with exclusion of any warranty ►Technical data without guarantee ►Subject to prior sale ❗The sale is strictly to business customers only❗

Year of construction: 1990, condition: ready for operation (used), Table dimensions X/Y: 900mm/350mm, magnet dimensions X/Y: 600mm/350mm, max. workpiece height: 375mm, max. table load: 300kg. Machine dimensions X/Y/Z: 3200mm/2600mm/2400mm, weight: approx. 400kg. Documentation available. An on-site inspection is possible. Nkedpfx Asyxgrqjhvsw

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, grinding length: 500 mm, grinding width: 200 mm, grinding wheel diameter: 255 mm, Machine in very good condition, not refurbished, original. Out of use for 10 years. Has only been a backup machine. Njdpfx Aheyxfv Usvskw

Condition: ready for operation (used), Year of construction: 1988, Horizontal surface grinding machine Okamoto Type PSG 63 – UAN Year of manufacture: 1988 Grinding length: 600 mm Grinding width: 320 mm Max. workpiece height: 500 mm Table travel (longitudinal): 750 mm Table travel (cross): 340 mm Grinding wheel diameter: 350 mm Grinding wheel width: 40 mm Spindle speed: 1500 rpm Rapid vertical feed: 400 mm/min Power: 3.7 kW Automatic feed Nodpfx Aoyxdaxjhvskw Magnetic chuck Coolant system Weight: 2500 kg Price: EUR 2,000—plus VAT, ex location

Condition: excellent (used), Year of construction: 1993, JUNG JF 600 Surface Grinding Machine Jung JF 600, Year of Manufacture 1993, Overhauled in 2018, Excellent Condition The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Specifications: Nedeyxdaljpfx Ahvekw - Year of Manufacture: 1993 / 2018 - Table length: 600 mm - Table width: 250 mm Axis movement: - Longitudinal travel (X-axis): 600 mm - Cross travel (Z-axis): 280 mm - Maximum distance between table and spindle center: 500 mm - Grinding length: 600 mm Table speed: - Infinitely variable: from 1 m/min to 24 m/min - Creep feed: from 0.03 m/min to 0.40 m/min Automatic cross feed: - Infinitely variable: from 0.010 mm/min to 10,000 mm/min Connection 50 Hz 3-phase: 380 Volt Grinding spindle motor: 9.5 kW Total power consumption: 13 kVA Machine weight approx.: 2,500 kg Machine dimensions: - Length: 2,910 mm - Width: 2,320 mm - Height: 1,840 mm Various accessories: - Coolant system About the machine: Offered is a Jung JF 600 surface grinding machine. This universal surface grinder is in very good original condition. It comes from a facility where it was only used sparingly for training purposes. The machine features a very user-friendly control system. The grinding travel of 600 mm on the longitudinal axis and a cross travel of 300 mm make this model ideal for toolmaking, jig manufacturing, and small batch production. A comprehensive standard configuration and straightforward operation are hallmarks of this machine series. The robust design of the spindle head and the double V-guides on both the longitudinal and cross axes ensure long-term precision. The intuitive operation of the controls makes handling easy and significantly increases productivity. The guideways are regularly lubricated via a central lubrication system. The Jung has been mechanically and electrically inspected by us. You are welcome to view and test the Jung while powered at our site. Further surface grinding machines from well-known manufacturers can be found on our website.

Condition: good (used), Year of construction: 1983, operating hours: 15,870 h, functionality: fully functional, grinding length: 600 mm, grinding width: 200 mm, table load: 100 kg, overall weight: 2,000 kg, distance stand to spindle center: 500 mm, input voltage: 400 V, Surface grinding machine Jung JF520 Year of manufacture: 1983 Operating hours: 15,870 h Grinding area: 600x200 mm Distance table to spindle center: 500 mm Max. table load: 100 kg Automatic table cross-feed Automatic grinding head height adjustment Rapid traverse Central lubrication Required space: 3100x1700 mm Weight approx. 2000 kg - Complete documentation Nkedpfx Aheyxcm Rsvsw - Extensive accessories: Grinding wheels Dresser Angle table Balancing scale

Condition: good (used), Year of construction: 2007, Kuehlmittelanlage 2.500l, Haftkraftregelung, halbautom. Wuchtsystem Nksdpodgk H Aefx Ahvjw Schleiflaenge 3150 mm Schleifbreite 800 mm Werkstueckhoehe 650 mm Tischflaeche 3.150 x 600 mm Magnetspannplatte 3.000 x 600 mm Spindeldrehanzahl 1/min Schleifscheibenabmessung 450 x 100 x 127 mm Spindelleistung kW Gesamtleistungsbedarf 22 kW Maschinengewicht ca. t Raumbedarf ca. 11 x 3 x 2,4 m

Condition: like new (used), Year of construction: 2006, operating hours: 10 h, functionality: fully functional, grinding length: 600 mm, grinding width: 280 mm, total height: 1,950 mm, total length: 1,770 mm, total width: 1,500 mm, grinding height: 312 mm, grinding wheel diameter: 355 mm, distance table to spindle center: 490 mm, table speed: 25,000 mm/min, type of input current: three-phase, grinding wheel width: 25 mm, spindle speed (max.): 1,500 rpm, overall weight: 1,350 kg, grinding spindle motor power: 2,200 W, input voltage: 400 V, space requirement height: 1,950 mm, space requirement length: 1,770 mm, space requirement width: 1,500 mm, Equipment: documentation/manual, Proth PSGS 2550 AH Year of manufacture: 2006 The machine has only been used as a demonstration unit and is therefore virtually unused and like new. Complete equipment: - Computer-controlled vertical feed - Magnetic chuck with demagnetizer - Parallel dressing device with micrometer adjustment - Coolant system with magnetic separator - Centralized automatic lubrication - Halogen lamp - Accessories: - 10 pcs balancing grinding wheel flanges - 12 pcs grinding wheels, steel/stainless/universal, 355 x 25 x 127 Tyrolit - Balancing arbor with balancing stand Table clamping surface: 250 x 500 mm Nkedoyw Rbaepfx Ahvow Fine-pole magnetic chuck: 250 x 500 mm Maximum travels (Y/X): 280 x 600 mm Max. distance table to spindle axis: 490 mm Max. distance table to bottom of grinding wheel: 312 mm Standard grinding wheel size: 355 x 25 x 127 mm Hydraulic longitudinal feed: 1 to 25 m/min Spindle speed: 1500 rpm Spindle motor: 2.2 kW Dimensions (LxWxH): 1770 x 1500 x 1950 mm Weight: 1350 kg Accuracy according to DIN 8632 Machine base made of double annealed cast iron High-quality spindle with precision tapered roller bearings, preloaded free of play both radially and axially, with maintenance-free permanent grease lubrication Double prism guides for longitudinal and cross travel Longitudinal and cross guideways coated with TURCITE-B and hand-scraped Table longitudinal movement hydraulic, table cross movement motor-driven Extremely smooth table reversing Separate hydraulic unit for improved hydraulic oil cooling and to prevent vibration transfer to the machine Description of the computer-controlled vertical feed AD 1: - Plunge grinding or surface grinding selectable - Rapid traverse vertically to the workpiece - Transition to rough grinding - Transition to fine grinding - Spark-out - Return to starting position

Condition: good (used), Cup wheel diameter: 175 mm Table clamping surface: 150 x 250 mm Max. installation height without/with magnetic chuck: 250/150 mm Grinding area: 100 x 360 or 150 x 190 mm Nedpoyvfq Eefx Ahvskw Grinding spindle speed: 2800 rpm Drive motor: 380 V, 1.5 kW Required space approx.: 800 x 600 x 1600 mm Weight approx.: 200 kg

Year of construction: 1999, condition: ready for operation (used), Grinding dimensions X/Y: 600mm/305mm, max. workpiece height: 350mm, feed rate X: 24m/min, feed rate Y/Z: 2m/min, machine dimensions X/Y/Z: approx. 3000mm/2700mm/2500mm, weight: approx. 3200kg, control: Siemens Sinumerik. The control has a circuit board defect. Documentation vorhanden. An inspection on site is possible. Njdpfx Asywy Rqehvjkw

Condition: used, Year of construction: 2001, functionality: unexamined, grinding length: 800 mm, grinding width: 600 mm, grinding height: 400 mm, grinding wheel diameter: 400 mm, grinding wheel width: 100 mm, grinding spindle motor power: 20,000 W, Used surface grinding machine and profile grinding machine, year of manufacture 2001, partially overhauled in 2019, ELB-SCHLIFF model PERFEKT-FUTURE BD 8 -F- Schleicher-Unicon CNC Njdsywk Akopfx Ahvekw Electro-magnetic clamping plate 500 x 300 x 4 mm, new pole pitch in 2019 Coolant system featuring combination of permanent magnet and paper band filter Adjustable coolant supply nozzle Grinding wheel flange

Condition: used, Jung F 50 Surface Grinding Machine Condition: Used Njdpfx Asyuy Euehvekw Technical Data Grinding Length: 500 mm Grinding Width: 200 mm Grinding Height to Spindle Center: 285 mm Table Size: 700 x 200 mm Spindle Speed: approx. 3000 rpm Grinding Wheel: 225 x 20 x 51 mm Feed: manual via handwheel Rapid Traverse Wheel Dressing Device Dimensions (L / W / H): approx. 1850 mm / 1300 mm / 1750 mm Weight: approx. 1400 kg

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 208901, grinding length: 2,040 mm, grinding width: 700 mm, total height: 2,600 mm, total length: 6,000 mm, total width: 2,900 mm, distance table to spindle center: 600 mm, table load: 1,300 kg, overall weight: 7,500 kg, SAEILO KENT KGS-715 WM 2 Surface Grinding Machine - Operating voltage: 400 V - Frequency: 50 Hz - Connection: 12.3 kW - Minimum distance from table to spindle center: 120 mm - Separate hydraulic unit to prevent thermal changes in the machine Nsdpfxjyuvvcj Ahvjkw - Infinitely variable longitudinal and cross table motion with automatic table reversal - Rapid vertical adjustment for the grinding head: 300 mm/min (rapid traverse) - Electronic handwheel for precise manual vertical and crossfeed - Adjustable magnetic chuck with clamping force monitoring - Magnetic chuck dimensions: 1500 x 720 mm - Automatic central lubrication with visual inspection - Side chip and splash guards - Grinding wheel dimensions: 355 x 50.8 x 127 mm - Highly precise positioning (cross axis reversal accuracy of 0.02 mm via servo motor) - Including matching workshop cabinet with various grinding wheels Attention: The item must be collected definitively between 05 and 07 May 2026 on a date yet to be agreed. FCA D-74385 Pleidelsheim – loaded onto truck

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 1984, Second hand tangential grinding machine Brand: Txurtxil Model: NX Machine serial number: 1984 All automatic movements, including Z axis. Njdpjrfwzljfx Ahvjkw Characteristics: Grinding capacity: 600x300mm Magnet table dimensions: 500x200mm Power: Three phase 380V Total power: 7CV

Condition: good (used), workpiece weight (max.): 250 kg, distance table to spindle center: 457 mm, overall weight: 2,900 kg, grinding spindle speed: 3,450 rpm, Chevalier FSG-3A818 Surface Grinder – Automatic Z Axis Brand: Chevalier Model: FSG-3A818 Serial No.: M3905002 Automatic Z-axis feed. Table dimensions: 203 × 557 mm Magnetic table: 200 × 450 mm Max. grinding travel (X, Y): 457 × 203 mm Nkedpfx Ahjwwrd Novew Distance from table to wheel center: 457 mm Longitudinal movement: - Speeds: 5 to 25 m/min - Max. manual travel: 530 mm / hydraulic: 500 mm Cross movement: - Max. movement speed: 960 mm/min - Automatic feed increments: 0.4 to 6 mm Vertical movement: - Automatic feed: 0.002 to 0.04 mm Wheel rotation speed: 3450 rpm Total power: approx. 3.7 kW Wheel diameter: 203 mm Maximum workpiece capacity on grinder: 250 kg (including magnetic table weight) Dimensions: 2180 × 1575 × 1900 (H) mm Weight: 2900 kg

Condition: used, Surface grinding machine Brand: Ger Model: RS-75/35 3 automatic axes (X, Y, Z) Technical specifications Low column: - Maximum grinding area: 750x375mm (X, Y) - Table to grinding wheel center distance: 525mm - Table speed: 2 to 32m/min. - Maximum table travel: 800mm - Maximum workpiece weight: 500kg - Magnetic table: 700x250mm Cross travel: - Maximum cross travel: 350mm - Rapid cross feed: 1.5m/min. - Automatic cross feed: 2 to 60mm/rev. - Handwheel revolution: 3mm - Handwheel division: 0.02mm Vertical movement: - Rapid vertical feed: 200mm - Handwheel revolution: 0.24mm - Handwheel division: 0.002mm - Wheel dimensions: 300x50x76.2mm Motors: - Head: 6Hp - Pump: 3Hp - Feeds: 0.75HP - Total: 7.5KVA Weight: 3,700kg Nkjdpfx Ahjwx Nlmsvjw Dimensions: 2,400x1,850x2,300mm

Condition: like new (used), functionality: fully functional, grinding length: 650 mm, grinding width: 300 mm, grinding wheel diameter: 160 mm, overall weight: 2,550 kg, power: 4 kW (5.44 HP), Brand: CCP - STANKOIMPORT Model: 3E711B Dimensions to grind: 650x300mm (X, Y) - 320mm (Z) Magnet table surface: 630x200mm Permissible table weight: 150kg Njdsqy H Dpepfx Ahvjkw Distance spindle axis to table surface: 80 - 445mm Maximum stroke of the grinding head: 365mm Manual table travel: (700mm, 250mm) Table travel speed: 2 - 30 m/mm. Cross traverse speed: 0,01 - 1,5m/mm. Vertical feed rate graduation value: 0,002mm Vertical micro. graduation value: 0,0005mm Transversal feed graduation value: 0,5mm Micro. vertical feed graduation value: 0,001mm Transverse displacement one revolution of the nonius: 5mm Vertical displacement one turn of the vernier: 0.20mm Automatic table traverse feed longitudinal course: 0,2 - 30mm Automatic feed rate for grinding head: 0,002 - 0,08mm Grinding wheel dimensions: 250x76x40mm Minimum grinding wheel diameter: 160mm Spindle motor: 4kw Weight: 2550 kg.

Condition: used, Year of construction: 2002, 1 unit surface grinding machine ELB TEB/BV2 Machine bed cracked, operating voltage 3x400V, frequency 50Hz, total connected load 20kW, control voltage 24V/DC, self-dismantling required. Nkjdsytp Uvjpfx Ahvew Color: as shown, according to photos and inspection Year of manufacture: 2002 Condition: used Storage location: production hall Payment method: advance payment by bank transfer Shipping: collection only from location in Regensburg

Condition: used, Year of construction: 2020, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2020 Control : Sonstige Grinding length : 600 mm Grinding width : 400 mm Spindle: Speed:1.400 rpm Power:3,7 kW Grindingwheel dimensions:300 x 50 x 76,2 mm Workingtable: Clamping surface:Magnettable, 600 x 400 mm Tableloading (max.):600 kg Tabledrive:Hydraulic Tablemovement:200 - 650 mm Rapid travers:28 m/min Grindingarea:600 x 400 x 375 mm Nkedjytlfdjpfx Ahvjw Equipment/Accessory: Measuringsystem:Motormeasuringsystem Dressingunit:Singlecorndiamant Coolingmanagement:Cooling unit with paperbeltfilter, Tank capacity 140 l Further accessory:Workingarea enclosure (partly), Working area lamp

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, grinding length: 400 mm, grinding width: 150 mm, JUNG JF 415 Jung JF 415 Surface Grinding Machine with Flanges and Coolant Belt Filter * Table length: 400 mm * Table width: 150 mm * Maximum grinding length: 400 mm * Maximum grinding width: 150 mm * Maximum workpiece weight: 75 kg * Distance spindle to table: 400 mm * Table speed: 1–24 m/min * Grinding wheel diameter: 25 mm * Spindle speed: 900 – 4500 rpm * Heidenhain digital readout * Year of manufacture: 1990, machine no.: 1566 Nodpfx Aheytfbfovjkw

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 193090635, grinding length: 650 mm, grinding width: 375 mm, grinding height: 375 mm, table load: 320 kg, overall weight: 4,000 kg, No reserve price - guaranteed sale to the highest bidder! Nkjdpfxjyr N Elo Ahvsw Bidding obligates you to collect the item punctually between 04.05.26 and 07.05.26. TECHNICAL DETAILS Grinding area: 650 x 375 x 375 mm Table clamping surface: 1,100 x 370 mm Table longitudinal travel: 100 - 850 mm Table load capacity: 320 kg Table feed: 1 to 30 m/min Table intermittent feed: 3 to 30 m/min Distance from table to spindle center: 525 mm Vertical feed rate: 2 - 180 mm/min Z-axis cross travel: 350 mm Magnet dimensions: 600 x 300 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 2,400 x 2,800 mm Weight: 4,000 kg External reference: 67

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 1051.0158, grinding length: 600 mm, grinding width: 300 mm, table length: 600 mm, table width: 250 mm, overall weight: 2,000 kg, No minimum bid – guaranteed sale to the highest bidder! Placing a bid obliges the buyer to timely collection between 04/05/26 and 07/05/26. TECHNICAL DETAILS Grinding length: 600 mm Nsdpfx Ahjyr Nwhsvekw Grinding width: 300 mm Grinding wheel diameter: 250/300 mm Clamping surface: 600 x 250 mm Magnet dimensions: 550 x 200 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 1,800 x 1,500 x 1,800 mm Weight: 2,000 kg External reference: 65

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, machine/vehicle number: 23220702, grinding wheel diameter: 300 mm, table length: 820 mm, table width: 350 mm, overall weight: 3,500 kg, controller model: SIEMENS SINUMERIK, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine within the specified period between 04.05.26 and 07.05.26. TECHNICAL DETAILS Grinding area: 600 x 350 x 375 mm Max. grinding wheel diameter: 300 mm Table dimensions: 820 x 350 mm Magnet dimensions: 600 x 350 mm MACHINE DETAILS Control system: SIEMENS SINUMERIK Nkjdpfxoyr Nqnj Ahvjw Operating voltage: 3 x 400 V Frequency: 50 Hz Rated current: 35 A Connected load: 7 kW Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,400 x 2,300 mm Weight: 3,500 kg EQUIPMENT Magnetic chuck MPM balancing device External reference: 61

Condition: used, Year of construction: 1988, 1 piece Okamoto PSG84UDX surface grinding machine Max. grinding area: 800 x 400 mm, 380V, 50Hz, with various accessories and storage rack, as per photos and inspection, self-dismantling required Color: grey Year of manufacture: 1988 Condition: used Storage location: production hall / right Nkjdpfx Ahjyr H Nbsvsw Payment method: advance payment via bank transfer Shipping: Collection only – shipping is not offered for this item!