Used Horizontal Hydraulic Press for sale (30,858)

Condition: used, Year of construction: 1980, pressure 6,3 t stroke 250 mm throat 150 mm dayligth 450 mm table surface area 330 x 270 mm table height over floor 970 mm ram surface 240 x 100 mm oil volume 30 l power requirement 1,5 kW Lsdpfoy Ig Nbex Aiiern dimensions (WxDxH) 0,9 x 1,3 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light-guard (make Pilz), controllable dependent on pressure/time and way, upper and lower stroke limitation, mechanical depth stop, two-hand operation

Condition: used, Year of construction: 1985, pressure 6,3 t stroke 250 mm throat 150 mm dayligth 440 mm table surface area 330 x 270 mm table height over floor 970 mm ram surface 65 mm oil volume 30 l power requirement 1,5 kW dimensions (WxDxH) 0,8 x 1,3 x 2,4 m with oil-hydraulic drive, light-guard (make Sick C 4000), controllable dependent on pressure/time and way, upper and lower stroke limitation, mechanical depth stop, two-hand operation Lrjdpfx Ajyfwvlsiisn

Condition: as good as new (ex-display), Year of construction: 2024, tool height: 130 mm, pressing force: 12 t, bending force (max.): 12 t, Stierli bender 120HE horizontal press Horizontal bending machine, manual control with angle fine adjustment. Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 12 tons tool height 130 mm Stroke 0-170 mm stepless Bending capacity 130x12 mm S235 Lodpjflc R Defx Aiijrn Straightening performance light straightening work Pipe bending 3/8"-11/2" Demonstration machine year 2024 incl. hand and foot pedal Machine as good as new

Condition: good (used), functionality: fully functional, PYE 160 S/1M hydraulic press. Ljdpfx Aijzdlrqsiern

Year of construction: 2023, condition: used, Pressing force 53 t stroke 300 mm control Siemens Pneumatic system pressure 6 bar Maximum supply pressure of the pneumatic system 10 bar Pressure in the hydraulic system 255 bar Dimensions (HxWxD) 3.200 x 2.500 x 2.350 mm weight 8.000 kg In our assessment, the bushing press is in like-new condition. Technical features: - Bushing pressing including plastic deformation - TOX pneumatic-hydraulic actuator with 53t pressing force at 6 bar - 300mm stroke - Siemens control Accessories, tools, and clamping devices shown are only included if Ljdpfszbvm Ijx Aiisrn specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: ready for operation (used), Hydraulic press PYE 160 S - 2 units available Specifications: Capacity: 160 tons Working pressure: 16 MPa Upward speed: 125 mm/sec Downward speed: 200 mm/sec Slide stroke: 500 mm Daylight: 360 mm Max. distance between table and slide: 800 mm Ejector capacity on the table: 63 tons Max. extraction depth: 200 mm Voltage: 380 V Total required power: 17 kW Nominal current: 35 A Total weight: 7 tons Hydraulic press ERFURT PYE 100 S - 2 units available Capacity: 100 tons Table dimensions: 750x560 mm Ram dimensions: 530x400 mm Ledpfjzdanzsx Aiiern Table height above floor: 710 mm Max. shut height: 800 mm Throat: 360 mm Stroke: 500 mm Downward speed: 320 mm/sec Upward speed: 200 mm/sec Connection power: 17 kW Press weight: 5 tons

Year of construction: 1979, condition: good (used), Hydraulic hose press, crimping tool, crimping machine, crimping jaws, crimping tool, hose press Lodpfx Aijzbirkoiern -Manufacturer: Aeroquip, Hydraulic hose press type SQM 40 -Pressing pliers: size Ø 14 to 35 mm Accessories: see photos -Transport dimensions: 635/420/H220 mm -Weight: 32.8 kg

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, The machine is fully operational and in good condition. Working dimensions: 3200 x 2200 mm Dimension adjustment is electrically controlled from the control panel. Ledpfx Aexmr Rxoiiern Powered by a hydraulic unit.

Condition: new, Year of construction: 2026, TECHNICAL DATA Pressing force 30t Maximum load on prism jaw 7.5t Piston stroke 160mm Piston travel 550mm Dimensions and weights Length (product) approx. 1240mm Width/Depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear opening 790mm Lrsdpsi Amnpefx Aiien Maximum installation height 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot levers Winch for raising and lowering the table Location: Ex works - available for immediate delivery -

Condition: used, Hydraulic press Ludwig Exner Model H4SP 340 Pressing force: 340 tons Electrical system from 2011 Dimensions approx.: Length 1.5 m, Width 1.2 m, Height 2.8 m The machine is connected and can be inspected and tested in Bremen. _____ Our general terms and conditions apply. In addition, the seller is not liable for typographical or data transmission errors. The information and images were provided to us by the owner and released for publication. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Lrjdszcy Sqopfx Aiien Used machines are sold exclusively to businesses and without any warranty.

Condition: used, Hydraulic Press Brake SAGITA BEYELER 200/4000 Slide travel: 150 mm Throat depth: 300 mm Distance between uprights: 3100 mm Motor power: 15 kW Manual Back gear gauge The machine was only used for pre-bending of Hardox sheet Voltage: 380 V Dimensions (L x W x H): 4100 x 1800 x 2700 mm Lredpfx Aijzcxn Djijn Weight: approx 15 T

Condition: ready for operation (used), Year of construction: 1996, pressing force: 85 t, stroke length: 365 mm, overall weight: 9,050 kg, Equipment: documentation/manual, Hydraulic press brake Manufacturer: TRUMPF, Type: TrumaBend V85 Lodpfx Ajza Hxreiisrn Year of manufacture: 1996 Technical data Manufacturer: Trumpf Type: TrumaBend V85 Year of manufacture: 1996 Press force: 85 t Operating hours: 46927 h (metered) Bending length: 2050 mm Stroke: 365 mm Stand distance: 410 mm Motor power: 10 kW Dimensions: approx. L 2.70 x W 2.40 x H 2.40 m Weight: approx. 9050 kg Equipment: • Controlled axes: Y1, Y2, X, R, Z1, Z2 • CNC-controlled crowning system • 2D graphics control DELEM DA • Hydraulic tool clamping, top and bottom • Pneumatic die shifting All information is provided without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: new, Year of construction: 2024, pressing force: 40 t, stroke length: 250 mm, table width: 700 mm, table length: 450 mm, throat depth: 230 mm, installation height: 400 mm, EXNER hydraulic single-column press NEW Series EEX SL 40 - Pressing force: 400 kN Ljdpfx Aijt D Ah Asijrn mech. depth stop Control: Siemens S7 - 1500 Installation height: 400 mm Stroke: 250 mm Tables: 700 x 450 mm

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 80 t, stroke length: 300 mm, table width: 800 mm, table length: 600 mm, throat depth: 330 mm, EXNER hydraulic single-column press, NEW, EEX SL 80 series Pressing force: 800 kN Mechanical depth stop Control system: Siemens S7 - 1500 Installation height: 450 mm Stroke: 300 mm Table dimensions: 800 x 600 mm Lrjdezcwrnepfx Aiijn

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, power: 8.75 kW (11.90 HP), pressing force: 25 t, stroke length: 500 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 360 mm, clearance between the columns: 800 mm, total length: 16,500 mm, total width: 10,500 mm, total height: 27,500 mm, overall weight: 2,200 kg, die cushion stroke: 160 mm, Hydraulic press PYE 25 S1M with ejector. Year of manufacture: 1987. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: Maximum pressing force: 25 tons. Working pressure: 16 MPa. Lsdpfx Aietzwxdoisrn Upper table: 450 x 360 mm. Lower table: 630 x 500 mm. Clearance: 800 mm. Cylinder stroke: 500 mm. Downward speed: 100 mm/sec. Upward speed: 450 mm/sec. Lower ejector force: 10 tons. Lower ejector stroke: 160 mm. Power requirement: 8.75 kW. Weight: 2200 kg. Height: 2750 mm, Length: 1650 mm, Width: 1050 mm. Very good technical condition. The machine has undergone a complete overhaul. Machine can be inspected and tested under power.

Condition: excellent (used), Year of construction: 1984, power: 17 kW (23.11 HP), type of input current: three-phase, pressing force: 160 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 125 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 800 mm, ram plate width: 700 mm, ram plate length: 450 mm, oil tank capacity: 500 l, total length: 22,000 mm, total width: 12,500 mm, total height: 34,500 mm, overall weight: 7,000 kg, operating pressure: 160 bar, installation height: 800 mm, pressure: 250 bar, Hydraulic press PYE 160 S/1M. Year of manufacture: 1984. Manufacturer: VEB Wema Zeulenroda (Germany). The machine has undergone a general overhaul. Specifications: Maximum pressing force: 160 tons. Operating pressure: 16 MPa. Upper table: 700 x 450 mm. Lower table: 900 x 630 mm. Daylight opening: 800 mm. Cylinder stroke: 500 mm. Downward speed: 200 mm/sec. Upward speed: 125 mm/sec. Power requirement: 17 kW. Oil tank capacity: 500 l. Weight: 7000 kg. Height: 3450 mm, Length: 2200 mm, Width: 1250 mm. Machine in very good condition. Inspection and test under power possible. Lredpfjqy E I Rox Aiion

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, power: 12.5 kW (17.00 HP), pressing force: 25 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 360 mm, total length: 16,500 mm, total width: 10,500 mm, total height: 27,500 mm, overall weight: 2,400 kg, distance between stands: 800 mm, PYE 25 SS hydraulic press. Year of manufacture 1977. manufacturer VEB Wema Zeulenroda (Germany). Parameters: Maximum pressing force 25 tons. Working pressure 16 MPa. Upper table 450 x 360 mm. Lower table 630 x 500 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Lredpfotzxvwjx Aiien Down speed 200 mm/sec. Upward speed 450 mm/sec. Power requirement 12,5 kW. Weight 2400kg. Height 2750mm, length 1650mm, width 1050mm. Technical condition of the machine very good. The machine after a general overhaul. It is possible to make a visual inspection and check the machine in motion.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, pressing force: 100 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 200 mm/s, table width: 750 mm, table length: 560 mm, ram plate width: 530 mm, ram plate length: 400 mm, total length: 1,900 mm, total width: 1,200 mm, total height: 3,200 mm, overall weight: 5,040 kg, Equipment: documentation/manual, Hydraulic press PYE 100 S1M with ejector. Manufacturer: Werkzeugmachinen GmbH Zeulenroda (Germany), year 1990. Specifications: Maximum pressing force 100 t. Operating pressure 16 MPa. Maximum ejector force 40 t. Ejector piston stroke 200 mm. Upper table 530x400 mm. Lower table 750x560 mm. Clear opening 800 mm. Cylinder stroke 500 mm. Downward speed 200 mm/s. Upward speed 200 mm/s. Power requirement 17 kW. Weight 5040 kg. Height 3200 mm, length 1900 mm, width 1200 mm. Lsdpfx Aijygtzyeijrn

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, pressing force: 40 t, stroke length: 500 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 380 mm, oil tank capacity: 300 l, total length: 1,150 mm, total width: 1,750 mm, total height: 3,050 mm, overall weight: 3,200 kg, distance between stands: 800 mm, Equipment: documentation/manual, Hydraulic press PYE 40 S1/M with ejector. Year of manufacture 1986. Manufacturer VEB Wema Zeulenroda (Germany). Machine after general overhaul. Piston seal replaced. Parameters: Maximum pressing force 40 tons. Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 630 mm. Clearance 800 mm. Cylinder stroke 500 mm. Down speed 100 mm/sec. Up speed 450 mm/sec. Ejector stroke 200 mm. Ejector force 16 tons. Power demand 13 kW. Weight 3180 kg. Height 3050mm, Length 1750mm, Width 1150mm. Lsdpfx Aowbt Uqjiiern The technical condition of the machine is very good. The machine has been overhauled. It is possible to inspect and check the machine in motion.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 250 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 110 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 800 mm, ram plate width: 750 mm, ram plate length: 450 mm, oil tank capacity: 500 l, total length: 2,200 mm, total width: 1,250 mm, total height: 3,700 mm, overall weight: 8,000 kg, Hydraulic press PYE 250 SS. Manufacturer: WMW VEB Zeulenroda (Germany), year 1985. Specifications: Maximum pressing force 250 tons. Working pressure 18.6 MPa. Upper table 750x450 mm. Lower table 900x630 mm. Clearance 800 mm. Cylinder stroke 500 mm. Downwards speed 200 mm/s. Upwards speed 220 mm/s. Power requirement 24 kW. Weight 8,500 kg. Height 3,680 mm, length 2,200 mm, width 1,250 mm. The machine is in very good technical condition. Fully overhauled. Ledpsvcb Tlsfx Aiiern

Condition: good (used), Year of construction: 1991, We are selling our Hydrap 160-ton press. The system is only available for sale as a complete unit. Lredetu Szljpfx Aiion Operating hours: 20,242 Condition: good Inspection is possible and welcome. Location: Szügy / Hungary

Condition: used, Year of construction: 1981, total length: 1,100 mm, total width: 1,800 mm, total height: 2,850 mm, Empty weight: 6.000 kg - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: 10340 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 160 - Table length [mm]: 630 - Table width [mm]: 550 - Ram length [mm]: 1100 - Transport dimensions: 1100mm x 1800mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lrsdjxywkqopfx Aiien Lukas van Rossum

Condition: used, Year of construction: 1986, total length: 1,350 mm, total width: 2,550 mm, total height: 2,700 mm, Empty weight: 7.000 kg - Year: 1986 - Documentation available: No Ljdpfx Aisx Ad Hkoisrn - CE certificate present: No - Serial number: 5499 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 63 - Max. stroke [mm]: 200 - Table length [mm]: 630 - Table width [mm]: 525 - Ram length [mm]: 1100 - Motor power: 20.0kW - Transport dimensions: 1350mm x 2550mm x 2700mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2000, total length: 1,000 mm, total width: 1,900 mm, total height: 2,000 mm, Colour: Grey Empty weight: 3.000 kg - Year: 2000 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 205570 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 160 - Max. stroke [mm]: 100 - Table length [mm]: 420 - Table width [mm]: 410 - Table bore diameter [mm]: 60 - Ram length [mm]: 120 - Ram width [mm]: 120 - Transport dimensions: 1000mm x 1900mm x 2000mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Lsdpey Ew Euofx Aiiorn Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,300 mm, total height: 2,500 mm, total width: 1,650 mm, overall weight: 9,600 kg, product height (max.): 455 mm, feed force X-axis: 600 N, feed length X-axis: 180 mm, input voltage: 400 V, type of input current: three-phase, warranty duration: 12 months, # Hydraulic CNC Servo Press Brake MTP 160x3200 The Hydraulic CNC Servo Press Brake MTP 160x3200 is a modern machine designed for precise bending of mild steel, stainless steel, and aluminum sheets. With a pressing force of 160 tons and a bending length of 3200 mm, it is suitable for both serial production and custom fabrication. The machine is equipped with the MTP-3212 CNC controller and 4 CNC-controlled axes (Y1, Y2, X, R), ensuring high accuracy, repeatability, and fast positioning. The intuitive controller with a large color touchscreen allows easy programming, automatic bending calculations, and storage of programs and tooling data. The press brake incorporates high-quality components from leading manufacturers, including a Rexroth hydraulic system, Schneider Electric components, and Omron safety devices. Steel hydraulic connections improve reliability and minimize the risk of leaks. For operator convenience, the machine features a mobile control panel, two front support arms, and LED working area illumination. Safety is ensured by a light curtain, side guards, rear safety protection, and easily accessible emergency stop switches. The machine is supplied with a CE Declaration of Conformity and an English user manual. ## Technical Specifications * Pressing force: 160 T * Maximum bending length: 3200 mm * Maximum sheet thickness: up to 8 mm * Control system: MTP-3212 CNC * Number of CNC axes: 4 (Y1, Y2, X, R) * Distance between side frames: 2600 mm * Throat depth: 320 mm * Ram stroke: 180 mm * Maximum opening height: 455 mm * Back gauge travel (X-axis): 600 mm * Tool clamping system: AMADA quick clamping * Motor power: 11 kW * Power supply: 400 V / 50 Hz * Dimensions (L × W × H): 3300 × 1650 × 2500 mm * Weight: 9600 kg ## Additional Information Lrsdpfszcmrdsx Aiijn * Professional technical support included * Assistance with tooling selection and bending parameters * CE Declaration of Conformity included * English user manual supplied * Spare parts support during and after the warranty period * Possibility to extend the warranty beyond the standard warranty period The machine is sold on an EXW basis. Transportation can be arranged upon request and quoted separately depending on the delivery destination. Our team will be pleased to provide a competitive transport quotation to any location within Europe and worldwide. For more information about our company, machines, and services, please visit our website. Metal Technics Polska is a trusted supplier of industrial machinery, offering professional sales support, technical assistance, spare parts availability, and after-sales service for customers throughout Europe.