Used Horizontal Frame for sale (13,969)

Condition: excellent (used), Year of construction: 2012, operating hours: 5,655 h, functionality: fully functional, overall weight: 2,860 kg, fuel type: diesel, color: yellow, axle configuration: 2 axles, empty load weight: 2,860 kg, fuel consumption (urban): 5 l/100km, fuel: diesel, gearing type: hydrostat, number of seats: 1, drive condition: 80 %, chain condition: 80 %, tire condition: 80 %, Equipment: all wheel drive, gripper hydraulics, hydraulics, rubber tracks, An authorized SUBARU dealer in Łaziska Górne has a Vermeer D9x13 Series 2 horizontal directional drilling rig from 2012 for sale, with 5600 operating hours. We specialize in importing and selling Vermeer and Ditch Witch drilling rigs. A special price is offered for self-collection from Denmark. Once the machine is delivered, refurbished, and fully serviced, the price will be a few thousand euros higher. The machine comes directly from Denmark, from its first owner. It is a compact and efficient HDD drilling rig, ideal for directional drilling for fiber optic, water, gas, power, and sewer installations, even in areas with limited space. Technical specifications of the Vermeer D9x13 Series 2: Engine: Kubota V1505T Diesel, turbocharged Engine power: 47 HP / 35 kW Push/pull force: 40 kN / 9000 lbs Maximum torque: 1763 Nm Spindle speed: up to 220 rpm Maximum carriage speed: 42.7 m/min Drilling fluid pump: 34.1 l/min or 56.8 l/min, depending on the version Maximum drilling fluid pressure: 51.7 bar Drilling fluid tank on the machine: 94.6 l Drill rods: Vermeer Firestick, length 1.8 m, diameter 42 mm Machine length: 3.80 m Transport width: 0.90 m Maximum working width: 1.08 m Height: 1.75 m Weight with drill rods: approximately 2860 kg Thanks to the extendable tracks, the machine is very stable during operation and, at the same time, exceptionally narrow during transport and operation in confined spaces. Additionally, a drilling fluid system is available: We also have a small Ditch Witch FT5 drilling fluid system/mixer from 2021 available for this drilling rig, which is a perfect match for this model and provides a practical set for small to medium-sized drilling projects. Ditch Witch FT5 – basic data: Year of manufacture: 2021 Tank capacity: approximately 757 liters / 200 gallons Maximum flow rate to the drilling rig: approximately 68 l/min Engine: Honda GX160, gasoline Engine power: approximately 5.4 HP Dimensions: approximately 185 × 81 × 136 cm Weight: approximately 182 kg It is possible to purchase the drilling rig alone or as a set with the Ditch Witch FT5 drilling fluid system. We specialize in the professional sale of construction, municipal, and specialized machinery. We are also an Authorized Subaru Dealer. We can arrange transport to the desired address throughout Poland. Nodpfxjzfgt Se Amyjcw For more information, photos, videos, and technical details, please contact our sales representatives. We invite you to contact us.

Condition: used, Year of construction: 1996, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 825 mm, controller model: Mazatrol M Plus, table width: 630 mm, table length: 630 mm, overall weight: 19,800 kg, spindle speed (max.): 10,000 rpm, Mazak FH 680 X • X axis 1100 mm • Y axis 800 mm • Z axis 825 mm • Rotary table 360° – 1° indexing • 2 pallets • Table size 630x630 mm • 10,000 rpm, BT 50 Njdpeyan Diefx Amyecw • Through-spindle coolant (IKZ) • Year of manufacture: 1996 • 19,800 kg Can be inspected under power.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 136722, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol M Plus, table width: 400 mm, table length: 400 mm, overall weight: 9,500 kg, spindle speed (max.): 10,000 rpm, Mazak H415 • X 560 mm • Y 510 mm • Z 510 mm • Rotary table 360° - 1° indexing • 6-pallet magazine • 120-tool magazine • SK 40 • Through spindle coolant (IKZ) • Year of manufacture: 1998 Ncodeyan Axspfx Amysw • 9,150 kg Can be inspected under power.

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t Ncedpfx Ajfxygwemysw cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm Ncsdpfxjxdttie Amyew - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: new, Year of construction: 2026, For sawing, e.g., stainless steel, tool steel, hollow profiles, and solid materials. Two-pole drive motor enables saw blade speeds of 30 and 65 m/min. Monitoring of the saw blade tension electromechanically via microswitches. When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve – additional locking on the cylinder is therefore not required. Saw arm inclined by 25°, resulting in a longer service life of the saw blade. Precise and robust blade guides with adjustable carbide plates. After the cutting process is completed, the saw blade stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With continuously adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/Depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Machine data Saw blade speed(s) 30 / 65 m/min Speed stages 2 Saw blade length 2450 mm Saw blade width 27 mm Saw blade thickness 0.9 mm Material feed Table height, material feed 925 mm Cutting ranges 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular (lying, hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular (lying, hollow profile) 160 x 90 mm Ncjdpfx Ajg U Uv Rsmyew -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular (lying, hollow profile) 90 x 90 mm Art. No.: 3680001 Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Optimum Geared Metal Band Saw OPTIsaw SD 200V For demanding sawing work Item number: 3300205 DESCRIPTION Ncodpfx Amjv Sg T Nsyow Quiet operation Sturdy cast iron construction Saw frame lowering continuously adjustable via hydraulic cylinder with throttle valve Microswitch for automatic limit stop Clearly legible scale for angle adjustment Standard with high-quality bi-metal saw blade Saw blade tension adjustable from the front via handwheel Ball-bearing saw blade guide Robust machine base with large wheels and handy transport handle for easy relocation of the machine Adjustable material stop for series work Safety switch for the saw blade cover Fully equipped, allowing the user to work productively immediately after commissioning TECHNICAL DATA Dimensions and Weights Length (product) approx. 1382 mm Width without material stop approx. 434 mm Width/Depth (product) approx. 533 mm Width with Material stop approx. 533 mm Height (product) approx. 1200 mm Height of lower end position approx. 790 mm Height of upper end position approx. 1200 mm Weight (net) approx. 130 kg Work table height 530 mm Electrical data Drive motor power 0.75 kW Connection voltage 230 V Mains frequency 50 Hz Coolant pump motor power 100 W Machine data Saw blade speed(s) 26 – 80 m/min Saw blade length 2360 mm Saw blade width 19 mm Saw blade thickness 0.9 mm Cutting angle 0 – 45° Feed continuously adjustable Saw frame lift manually Cutting ranges Cutting range 0° round (solid material) 180 mm Cutting range 0° square (solid material) 180mm Cutting range 0° rectangular vertical (solid material) 180 x 240 / 50 x 300mm Cutting range +45° round (solid material) 110mm Cutting range +45° square (solid material) 150mm Cutting range +45° rectangular vertical (solid material) 110 x 170mm SCOPE OF DELIVERY Material stop Bi-metal saw blade Machine base

Condition: new, Year of construction: 2026, For sawing pipes and solid materials made of high-grade and tool steel. Two band speeds via a pole-changeable motor. Robust gearbox with hardened and ground shaft. Precise and robust band guides with adjustable carbide plates. Longer service life of the saw band due to a 25° saw arm inclination. Efficient coolant application to the saw band guides. Electromechanical monitoring of the saw band tension; if deviations occur, a microswitch switches off the machine. Chip removal brush for optimal cleaning and maintenance of the saw band. Operation of the semi-automatic machine: Automatic workpiece clamping after the start of the cutting cycle. Execution of the sawing cut with the selected band speed. Automatic stop of the lowering movement and the saw band in the lower end position. Automatic retraction of the saw arm to its upper end position. Vise opens automatically. The operator only needs to move the material. Equipment: Two band speeds Cutting feeler Coolant system Chip removal brush Saw band tension monitoring Swiveling control panel Length approx. 1860 mm Width/Depth approx. 1045 mm Height approx. 1750 mm Weight approx. 405 kg Drive power Power consumption 1.5 kW Electrical data Connection voltage 400 V Machine data Saw band speed(s) 20 - 100 m/min Speed stages continuously variable Saw band length 2720 mm Saw band width 27 mm Saw band thickness 0.9 mm Cutting angle +60 – -45 ° Cutting ranges 0° round (pipe) 230 mm 0° round (solid material) 150 mm 0° rectangular lying (hollow profile) 280 x 180 mm 0° bundle (pipe) 180 x 120 mm -45° round (pipe) 195 mm -45° round (solid material) 110 mm -45° rectangular lying (hollow profile) 180 x 170 mm -60° round (pipe) 125 mm -60° round (solid material) 80 mm -60° rectangular lying (hollow profile) 120 x 100 mm +45° round (pipe) 185 mm +45° round (solid material) 110 mm Nodod Hx Uqepfx Amyscw +45° rectangular lying (hollow profile) 180 x 120 mm Feed Table height material feed 785 mm Min. remaining workpiece length 22 mm

Condition: new, WRAVOR WRC 1050 AC – Power, Precision, and Reliability in Wood Processing Looking for a band saw that combines power, precision, and efficiency? The WRAVOR WRC 1050 AC delivers all that – and more! This horizontal band saw is designed for serious wood processing professionals, yet it remains a reliable and versatile solution even for smaller workshops. _____ Key Benefits: High Efficiency: Exceptional productivity with cutting capacity of up to 30 m³ in an 8-hour shift, with minimal energy consumption and low maintenance costs. Precise Cutting: Thanks to advanced technology and a stable construction, the WRAVOR WRC 1050 AC ensures clean and accurate cuts – even with the toughest types of wood. User-Friendly: Intuitive controls, fast installation, and easy adjustments make this saw ideal for both industrial applications and individual craftsmen. Versatility and Durability: Built from high-quality materials, this machine is capable of processing various wood types – from soft to hard, solid, or composite. Smart Technology: An innovative control system automatically adapts to different working conditions, saving both time and resources. Ncodpswfq Naefx Amyow Eco and Energy Efficient: Low energy consumption reduces operational costs while being environmentally friendly. _____ Specifications: • Model: WRC 1050 AC • Motor Power: 30 / 37 / 45 kW • Cutting Capacity: up to 30 m³ / 8h • Maximum Log Diameter: Ø 1050 mm • Applications: industrial wood processing, carpentry, cutting of pallets, beams, solid wood, and more _____ WRAVOR WRC 1050 AC – Your Partner in Every Cut! For more information or a quote, contact us today.

Condition: used, functionality: unexamined, Ferwood Code: RU0008932 - Manufacturer Code: DRG4425 - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Ncedpsv Hp Avsfx Amysw

Condition: used, machine/vehicle number: 005107, Stock dimension length: 18800 mm Stock dimension width: 15000 mm Nedpfjiiipusx Amyscw

Condition: used, Year of construction: 1973, machine/vehicle number: 959, Horizontale Trennsäge / Horizontal Band Saw Jllig TS 100 VBaujahr / Year 1973 - Serial-No. 959 Arbeitsbreite / Working width max. 590mm Ersatz Sägeblatt / Spare Saw band Stufenlose Höhenverstellung des Sägebandes / stepless height adjustment of saw band Stufenlos regelbarer Antrieb / stepless adjustment drive Online-Video-Inspection by Skype-Video Ncsdpfxermul Se Amyjw We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1987, machine/vehicle number: 33879, Stehendbogenauslage - Horizontal Stack Delivery with Pressing Stahl SBP 46Year 1987 - Serial-No. 33879/87-134584 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Nedsh Aygfepfx Amyecw

Condition: used, Schließrahmen - Frame SBB Letter Press HeidelbergSBB - 560 x 820mm Nedpfx Ajrffm Njmyocw Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Schließrahmen - Frame OHT Letter Press Heidelberg OHT A4-24 Frame OHT Tiegel Nedjrffmzspfx Amyocw -8 Frame KS Cylinder -1 Frame KSB Cylinder -2 Frame S Cylinder -4 Frame SBG Cylinder -1 Frame Adast GP Tiegel Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Bündelpresse / Bunch Press - horizontal La Fornigrafica BPHydraulische horizontale Bündelpresse / hydraulic horizontal bunch Press Pressdruck stufenlos einstellbar / Pressure steppless 0 – 2.500 kg Ncedjh R Udwjpfx Amyew Einsatzlänge / Infeed length max. 820mm Pressplattengrösse / Press plates size 340 x 260 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Schließrahmen - Frame KSB Letter Press Heidelberg KSB A4-1 Frame KSB Cylinder Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Ncjdsrffmwjpfx Amyow Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Schließrahmen - Letter Press Frame Adast GP Tiegel-1 Frame Adast GP Tiegel Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Ncjdpfx Amorffnioyew On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Schließrahmen - Frame SBG Letter Press Heidelberg SBG A4-4 Frame SBG Cylinder Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Ncjderffm Tspfx Amyew On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1979, machine/vehicle number: 14256, Stehendbogenauslage mit Presswalzenauslage - Horizontal Stack Delivery with Pressing Stahl SBP 40Year 1979 - Serial-No. 14256/79 Size width max. 400mm Vertical press delivery -modified with SELFControl- Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Ncsdpfx Amsrgbz Esyew Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1994, machine/vehicle number: 49504, Stehendbogenauslage mit Markiereinrichtung - Horizontal Stack Delivery with Pressing - Marking Stahl SBP 46.2Year 1994 - Serial-No. 49504/94-218513 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Ncsdpfx Ajh Ax S Dsmyew

Condition: used, Year of construction: 1998, machine/vehicle number: 106026, Horizontal stack delivery with pressing and marking device Heidelberg SBP 46.D + MKE.DYear 1998 - Serial-No. 106026/98-263536 Sheet size min. (width × length) 120 × 100mm Sheet size max. (width × length) 460 × 300mm Product thickness max. 4mm Pile length 800mm Ncsdpfeh Axhdsx Amyjw Pressing force 8,000 N Infeed height 360-960mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Schließrahmen - Frame KS Letter Press Heidelberg KS-8 Frame KS Cylinder Nodpfx Amorffmtjyjcw Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Schließrahmen - Frame S Letter Press Heidelberg S A4-2 Frame S Cylinder Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Ncjdorffm Eepfx Amyjw

Condition: used, Bündelpresse / Bunch Press - horizontal Tränklein BPHydraulische horizontale Bündelpresse / hydraulic horizontal bunch Press Pressdruck stufenlos einstellbar / Pressure steppless 0 – 2.500 kg Nodpfx Asiwg A Ejmyecw Einsatzlänge / Infeed length max. 770mm Pressplattengrösse / Press plates size 290 x 220 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test