Used Horizontal Cnc for sale (13,764)

Condition: used, • Completely refurbished by us • Glass thickness: 2-12 mm • Minimum dimensions: 150 x 150 mm • Maximum glass width: 700 mm • Dimensions: L = 2400 mm, W = 1400 mm, H = 1200 mm • Connection values: 380/50 V, 13 kW • Price available upon request Knodpfjz Snxbsx Albec

Condition: excellent (used), Year of construction: 2018, operating hours: 4,566 h, spindle bore: 80 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 565 mm, spindle motor power: 22,000 W, total height: 1,824 mm, total length: 2,800 mm, total width: 1,790 mm, overall weight: 4,350 kg, Tooling package with Tool Holders Axial driven live tools holders Radial driven live tools holders Kitagawa B210 3 Power Chuck Max. turning Ø: 580mm X-Axis: 260mm Z-Axis: 565mm Spindle bore: 80mm Speedrange: 5000Rpm Spindle power: 22kW ATC / revolver: 12 Speed live tools:6000Rpm Chip conveyor: Yes Tool eye: Yes Hours: 4566H Pinole taper: 5Mk Length: 2800mm Width: 1790mm Height: 1824mm Weight: 4350kg Ksdpfx Aoz Syh Uolbjnc Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2004, functionality: fully functional, IRLE IRD 1600 CNC End finishing machine Manufacturer: IRLE, Type: IRD 1600 CNC Year of manufacture: 2004, Control: Max. workpiece diameter: 1,625 mm Min. workpiece pipe diameter: 406 mm Max. workpiece pipe length: 13,200 mm Min. workpiece pipe length: 6,000 mm Min. pipe wall thickness: 12 mm Max. pipe wall thickness in copying mode: approx. 40 mm Max. pipe wall thickness in CNC mode: 70 mm Max. pipe weight: 250 kN Height between the hall floor and the pipe inlet: 800 mm Overall machine length: approx. 24,000 mm Overall machine width: approx. 4,100 mm Overall height from floor to top of clamping fixture: 5,000 mm Machine weight: approx. 700 kN 01 - Intermediate carriage with travel drive Carriage length: approx. 3,950 mm Carriage width: approx. 1,800 mm Carriage height incl. undercarriage: approx. 600 mm Travel speed on the base rails: 500 - 5,000 mm/min 01 - Intermediate carriage with travel drive Carriage length: approx. 3,950 mm Carriage width: approx. 1,800 mm Carriage height incl. undercarriage: approx. 600 mm Travel speed on the base rails: 500 - 5,000 mm/min 02 - Headstock Rotational speed range of the faceplate: 7 - 27 - 105 min" Motor speeds: 300 - 1,150 - 4,500 min" Motor power: 100 kW Motor power in S1 operation: 14.3 - 129 - 105 kW Max. torque of the faceplate in S1 operation: 33,000 Nm Rated speed: 27 min" Diameter of the main spindle in the front bearing: 300 mm 03 - Faceplate, X-axis Faceplate diameter: approx. 1,950 mm Kjdozqun Uepfx Albonc Travel distance of the NC tool holder: approx. 650 mm Feed rate of the adjustable tool holder: 0.5 - 1,500 mm/min (infinitely adjustable) Max. achievable feed force: 25 kN 04 - Feed drive; Z-axis Feed travel of the headstock on the machine bed: 800 mm, infinitely variable Three-phase controlled servomotor: 0.5 - 200 mm/min Rapid traverse speed: 1,500 mm/min Feed force: 30 kN Torque of the feed motor Mt = 27 Nm 05 - Pipe clamping mandrels Clamping range: 406 - 1,625 mm Pipe weight per mandrel: 150 kN Adjustable clamping force: 10 - 200 kN Max. adjustment speed of the centrally adjustable clamping crossbars: 600 mm/min

Condition: good (used), Year of construction: 2004, functionality: fully functional, overall weight: 13,500 kg, CNC turning and milling center with 9 CNC axes, Okuma MacTurn 350 W, Year of manufacture 2004, OSP-E 100L, Additional magazine, Magazine with 80 tool positions, Main spindle with C-axis, Counter spindle with C-axis, Y-axis slide at the top / milling spindle, HSK 63 tool holder, Stepless B-axis as milling spindle, Distance between centers 1500 mm, Knodpfx Alozt Ihmobjc Spindle bore 80 mm, Max. turning diameter 550 mm, Turning diameter 350 mm, Turret at the bottom with 12 tool positions and driven tools, Interlite compact filter system 900 l, Extraction system, Spindle operating time approximately 18,300 hours, Chip conveyor, Tool changer gripper arm completely renewed, High-pressure coolant, Coordinate measuring machine (CMM) measuring arm, Tool changer overhauled, Main spindle Kitagawa B - 210, Counter spindle Kitagawa B - 208.

Condition: good (used), Year of construction: 2004, functionality: fully functional, CNC turning and milling center with 9 CNC axes, Okuma MacTurn 350 W, Year of manufacture 2004, OSP-E 100L, Additional magazine, Magazine with 80 tool positions, Main spindle with C-axis, Counter spindle with C-axis, Y-axis slide at the top / milling spindle, HSK 63 tool holder, Stepless B-axis as milling spindle, Distance between centers 1500 mm, Spindle bore 80 mm, Max. turning diameter 550 mm, Turning diameter 350 mm, Turret at the bottom with 12 tool positions and driven tools, Interlite compact filter system 900 l, Extraction system, Spindle operating time approximately 18,300 hours, Chip conveyor, Tool changer gripper arm completely renewed, High-pressure coolant, Knedpfxjz Dguds Albec Coordinate measuring machine (CMM) measuring arm, Tool changer overhauled, Main spindle Kitagawa B - 210, Counter spindle Kitagawa B - 208.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Weiler DZ 40, Year of manufacture: 2008, Siemens 840 D control, Travel X/Z: 200/350 mm, Turning diameter: 180 mm, Max. swing diameter: 560 mm, Y-axis: +/-25 mm, Q-axis / programmable tailstock, Q-axis travel: 360 mm, Q-axis measuring system: rotary, Tailstock: MK 4, Main spindle max. bar capacity: 42 mm, Spindle bore: 52 mm, Rapid traverse X/Z/Q: 30/30/20 m/min, Turret: 16 stations – all driven, VDI 25, Shank diameter: 25 mm, Driven tools up to 4,500 rpm, Parts catcher, Kjdpfx Alez Dgvnebjnc Accessories, Driven tool holders, Fixed holders,

Condition: good (used), Year of construction: 2004, functionality: fully functional, Gildemeister GMX 400 Year of manufacture: 2004 Control system: Siemens 840 D Powerline Max. turning diameter: 640 mm Turning length: 1,585 mm Standard turning diameter: 400 mm Control: Sinumerik 840D powerline Siemens Distance between centers: 1,930 mm Main spindle: Type: ISM 90 Max. speed: 4,000 rpm Drive power - main spindle: 36 / 45 kW Max. torque: 600 Nm Spindle diameter front bearing: 150 mm Spindle bore: 107 mm Max. bar diameter: 102 mm C-axis: 0.001° Chuck diameter: 315 (max. 400) mm Milling spindle: Max. speed: 12,000 rpm Drive power - milling spindle: 13.2 / 22 kW Max. torque: 100 Nm Tool holder: HSK-A63 Holding torque: 500 Nm y-axis: +/- 110 mm b-axis: +/- 120° c-axis: 1° x-travel: 550 mm Bearing diameter: 80 / 55 mm Tool magazine: Number of tool slots: 120 positions Tool holder: HSK-A63 Max. tool length: 350 mm Chip conveyor Kedpfxjytpfzs Albonc Feeds: Rapid traverse X1/Z1: 40/60 m/min Total power requirement: 70 kVA Machine weight approx.: 20.0 t

Condition: good (used), Year of construction: 2005, functionality: fully functional, Toyoda FH 550, Year of manufacture 2005, Fanuc 31i MA control system, Travel range X/Y/Z 750/800/850 mm, Pallet size 550 x 500 mm, Spindle speed up to 15,000 rpm, 60-tool automatic tool changer, BT 40, Coolant system, 70 bar, Knodpfey S Rp Tex Albjc Chip conveyor.

Condition: excellent (used), Year of construction: 2023, 400mm swing, 220mm max diameter, 490mm between Centres, Siemens 828 Control, 65mm bar capacity, 12 station VDI30 turret, 17kW Spindle Motor, Knodpjz Srv Dsfx Albsc Spindle Speed 4000rpm, 0.001 degree C axis, +/- 35mm Y axis, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: used, total height: 1,700 mm, total length: 4,900 mm, total width: 1,900 mm, Year of manufacture: 1979 Colour: Green Empty weight: 8.000 kg Metal turning lathe Model: Conventional Manufacturer: TOS Type: SU-100 Centerdistance: 2000mm Ksdpfownhf Rsx Albenc Turningdiameter above bed: 1050mm Spindle-hole: 105mm Motorpower: 22kW Spindle-speed: 2,24-450rpm Max. workpiece weight: 5000kg Including 4-jaw-chuck + lynette Machine-dimensions: 4900x1900x1700mm Machine-weight: 8000kg Machine has been tested, in very good condition Video is available - Year: 1979 - Serial number: 0429412 - Drive system: Conventional - Power [kW]: 22.0 - Swing over bed [mm]: 1050 - Distance between centres [mm]: 2000 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 2.24 - Max. spindle speed [rpm]: 450 - Options: Four-jaw chuck, Fixed steady - Transport dimensions: 4900mm x 1900mm x 1700mm (l x w x h) - Transport weight [kg]: 8000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2010, condition: excellent (used), functionality: fully functional, The Trimmer 2A is a CNC corner cleaning machine for PVC window frames, equipped with 2 interpolated axes and an automatic cycle. When properly configured, it is able to check the dimensions of the workpiece. It is fitted with a 275 mm diameter blade, which allows, through different machining programs, the cleaning of the external corner on various profiles. The Trimmer 2A also features upper and lower units with blades for cleaning the bead seams, as well as upper and lower units with knives for cleaning internal corners. Cleaning of both internal and external corners can be completed using the upper and lower drilling/milling units for cleaning the corners or the gasket seats. The processing units can be programmed independently via a CNC PC, which controls the profile programming and the machine’s operation, in either manual or automatic mode. Knjdpfjw Hk T Usx Albsc

Condition: used, Year of construction: 2018, Müga H 250-5 horizontal CNC machining center" Horizontal CNC machining center Müga Type/Model: H 250-5 Condition: Used New spindle with currently 0 spindle hours Year of construction: 2018 Technical data Travel distances X / Y / Z: 380 mm / 250 mm / 350 mm B-axis: Swiveling round table: Ø 250mm Rated voltage: 400 V, 3 phases 50 Hz Circuit 1: 250 V 50 Hz Knsdjz Syxtepfx Albsc Circuit 2: 24 VDC Installed power: 30 kW Pre-fuse: 50 A Pneumatic connection: 6 bar Weight approx.: 60,000 kg Machine dimensions (L x W x H) approx.: 1.7 m x 4.1 m x 2.5 m Equipment - Siemens Sinumerik S 828 D control system - FMB bar loader - Additional coolant filtration for the internal cooling system - Chip conveyor Inquiry item: Transport costs in a customized offer.

Condition: used, machine/vehicle number: 008319, X axis working area: 6380 mm Y axis working area: 1380 mm Working Table: Pod and Rail Ksdpfx Ajx A Tc Ijlbenc Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Total number of tool changer positions: 32

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 12900 € 247.68 € 40 to 285 mm 200x24 mm 660x1250 mm 250 mm 80 mm 10 mm/s 10 mm/s 4 kW 930 mm 1250 mm 650 mm 1250 mm 1100 kg Stroke adjustment with digital display Knedpfx Aswiq N Ijlbsc Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request

Condition: used, Year of construction: 2015, turning diameter max. 240 mm turning length 470 mm control 840 D sl Operate 4.8 Celos greates pass round over bed 500 mm swing diameter over slide rest 290 mm centre distance 780 mm turning speed range - main spindle max. 6.000 min/-1 Kedpfx Alez S Nyaebjnc power capacity - main spindel 13 / 14 kW max. Torque 171,5 / 192 Nm inner draw tube diameter 52 mm C-Axis 0,001 ° spindle diameter in front bearing 100 mm spindle nose FL 140H5 Spindle speed range subspindle max. 6.000 min/-1 power capacity - Sub spindle 12,6 / 16,2 kW max. Torque 48 / 62 Nm inner draw tube diameter 37 mm C-Axis 0,001 ° spindle diameter in front bearing 90 mm spindle nose FL 140H5 number of toolpositions 12 pos. Number of driven toolspositions 12 pos. tool taper VDI 30 Spindle speed - driven tool stations max. 5.000 min -1 power capacity - driven tool-stations 4,18 kW max. Torque 16 / 20 Nm y-axis 80 (+/- 40) mm x-axis 145 mm y-axis 80 (+/- 40) mm z-axis 520 mm z2-Axis 550 mm rapid traverse ( X / Y / Z ) 30 / 22,5 / 30 m/min Feed force ( X / Y / Z ) 4,5 / 4,5 / 7,5 kN total power requirement 30 kVA weight of the machine ca. 4,3 t dimensions of the machine ca. 7,0 x 3,0 x 2,2 m CNC - Turning- and MillingCenter DMG GILDEMEISTER - CTX alpha 500 V6 - Only approx. 11,139 spindle hours - External chuck flushing system for the main spindle - External chuck flushing system for the counter-spindle Coolant supply through the counter-spindle - Coolant spray gun - Bar machining package Workpiece unloading device with conveyor belt (left-hand side) for parts up to 51 mm in diameter and 185 mm in length, max. 3 kg Hydraulic hollow clamping system Draw tube inner diameter: max. 52 mm 4-color signal light Connection for bar feeder or bar loading magazine - Preparation for external handling Electrical robot interface (Profibus) Automatic work area door Chuck flushing system with coolant (main spindle)

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,416 h, functionality: fully functional, turning diameter over cross slide: 630 mm, turning length: 4,000 mm, turning diameter: 950 mm, spindle bore: 254 mm, spindle speed (max.): 630 rpm, travel distance X-axis: 535 mm, travel distance Z-axis: 3,845 mm, total height: 1,850 mm, total width: 2,105 mm, type of input current: three-phase, spindle nose: A2-15, Equipment: documentation/manual, Hankook Protec 9NC Hollow Spindle Oil Country Lathe Model: Protec 9NC Control: Fanuc 21i-TB Year: 2010 Spindle Bore: 254mm Knodpfez S Ncuex Albjc Capacity: 950 x 4000mm Swing Over Cross Slide: 630mm Spindle Speeds: To 630 RPM (2 Ranges) Main Motor: 37 KW Machine With: Double 4 Jaw Manual Chucks (front or rear) Duplomatic 8 Station Turret 2 x Fixed Steadies

Condition: used, total length: 3,600 mm, total width: 2,150 mm, total height: 220 mm, Year of manufacture: 2002 Colour: Cream Empty weight: 5.000 kg Price: On request - Year: 2002 - CE marking present: Yes - Serial number: - Drive system: Teach-in - Control system brand: Fagor - Control system type: 8055 Kjdszkul Topfx Albsnc - Power [kW]: 15.5 - Centre height [mm]: 275 - Swing over bed [mm]: 550 - Carriage turning diameter [mm]: 310 - Distance between centres [mm]: 1600 - Bed width [mm]: 420 - Spindle bore [mm]: 82 - Min. spindle speed [rpm]: 80 - Max. spindle speed [rpm]: 3500 - Max. workpiece weight [kg]: 2000 - Options: Three-jaw chuck, Travelling steady, Fixed steady, Removable bed - Swing over removable bed [mm]: 790 - Transport dimensions: 3600mm x 2150mm x 220mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 2,000 mm, total width: 1,300 mm, total length: 5,900 mm, Year of manufacture: 1990 Colour: Green Empty weight: 7.500 kg Center-height: 250mm Table-length: 2300mm Travel grinding-spindel: 200mm Gear diameter: 300 mm Kodpozy E Tajfx Albonc Module range: 0.5 mm – 8 mm Helix angle: ±35° Max. workpiece weight: 100 kg - Year: 1990 - Documentation available: No - CE certificate present: No - Serial number: 018.0402 - Drive system: CNC - Control system brand: Optronic - Control system type: CNC D140 - Horizontal/vertical: Horizontal - Model: Gear hobbing machine - Min. module [mm]: 0.5 - Max. module [mm]: 8 - Max. workpiece width [mm]: 2300 - Max. workpiece height [mm]: 500 - Max. workpiece weight [kg]: 100 - Table length [mm]: 2300 - Transport dimensions: 5900mm x 1300mm x 2000mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, STRUERS Metallographic Cutting Machine Struers Magnutom-5000 XYZR NEW / unused – Year of manufacture 2025 Automatic X-table with rotation and accessories New, unused metallographic cutting machine for the automatic cutting of large material samples. Not assembled or put into operation; stored in shipping condition. Technical data: Manufacturer: Struers Type: Magnutom-5000 XYZR Article number: Year of manufacture: 2025 Design: 4 axes with X-table and rotation Electrical data: Mains connection: 3 × 380–480 V / 50–60 Hz Motor power S1: 11 kW Motor power S3: 16 kW Rated current: 34 A Maximum current: 48 A Maximum load current: 31 A Cutting wheel – manufacturer’s specifications: Maximum diameter: 508 mm (20 inches) Cutting wheel thickness: 3.5 mm Inner hole diameter: 32 mm Speed range: 1,000–2,400 rpm Cutting capacity according to the manufacturer: Maximum diameter: 190 mm Other cutting ranges: 190 × 254 mm 184 × 400 mm 114 × 618 mm Kedpfx Alez Tfl Ijbsnc Depending on the workpiece and cutting process Cutting table and axes: Automatic X-table: 524 × 781 mm (W × D, max.) X-axis travel: 370 mm Rotary table: Ø 533 mm T-slots: 12 mm Cutting wheel positioning range Y: 395 mm Cutting wheel positioning range Z: 214 mm Dimensions and weight: Width: 1,758 mm Depth: 1,463 mm Height: 1,882 mm Weight according to nameplate: 2,510 kg Dimensions according to manufacturer’s brochure Cutting chamber – manufacturer’s specifications: Width: 1,000 mm Depth: 1,206 mm Height: 918 mm Equipment and functions: Automatic X-table with rotation Variable cutting wheel speed Direct drive AxioCut and OptiFeed AxioWash – automatic cleaning program Laser for cut positioning Cutting wheel monitoring Programmable cutting sequences and simulation Automatic XYZR movements Areas of application: Metallography, materials testing, sample preparation, Quality assurance, research and industry Scope of delivery according to parts list and original photos: 1 × Struers Magnutom-5000 XYZR – Art.-No. × Coolimat-2000 band filter – Art.-No. × Water level indicator – Art.-No. × COLMF magnetic filter – Art.-No. × Signal lamp – Art.-No. × Collection tray 4,080 × 2,000 × 50 × 3 mm – DE-730200 1 × Service kit Magnutom-5000 – Art.-No. 16582999 Additional accessories according to documented delivery condition. Notes on cooling and commissioning: Coolimat-2000 band filter included according to the parts list. Circulating cooling unit and clamping tools for 12 mm T-slots must be ordered separately according to the sales documentation. Check the scope of the cooling system before commissioning. Condition: NEW / unused, year of manufacture 2025 Not assembled or put into operation Main unit securely packaged for transport Accessories partially in original packaging Original purchase price (net): €140,744.00 Assembly and commissioning are not part of the offer and must be arranged by the buyer. Weight: 3100 kg Shipping by freight forwarder possible upon agreement. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: good (used), Year of construction: 2008, operating hours: 40,781 h, functionality: fully functional, pressing force: 56 t, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 450 kg, type of input current: three-phase, input voltage: 400 V, overall weight: 16,000 kg, power: 22 kW (29.91 HP), input frequency: 50 Hz, Horizontal full automatc press, with conveyor Kedez Tftfopfx Albenc

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Okuma, controller model: OSP E100M, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 1,000 mm, workpiece weight (max.): 1,200 kg, total height: 3,280 mm, total length: 6,495 mm, total width: 3,460 mm, table width: 630 mm, table length: 630 mm, overall weight: 26,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 15 bar, number of slots in tool magazine: 60, Equipment: chip conveyor, We are pleased to offer this very well-maintained Okuma MA-600HB horizontal machining centre. The machine was manufactured in 2004 and is fitted with the OSP E100M control system. Technical specifications: Pallet table size: 630 x 630 mm Number of pallets: 2 Table load: 1200 kg Movement X-axis: 1000 mm Movement Y-axis : 950 mm Movement Z-axis : 1000 mm Table indexing: 360 x1 ° Spindle Taper: MAS BT50 Spindle speed: 12.000 1/min Spindle motor: 37/26 kW Magazin capacity: 60 Ksdjz Tq Tkopfx Albjnc We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you.

Condition: used, total length: 1,800 mm, total width: 110 mm, total height: 1,700 mm, Year of manufacture: 1985 Colour: Grey Empty weight: 1.000 kg - Year: 1985 - Documentation available: No - CE certificate present: No - Serial number: 315.928 - Drive system: Conventional - Centre height [mm]: 750 - Swing over bed [mm]: 1500 - Distance between centres [mm]: 600 - Transport dimensions: 1800mm x 110mm x 1700mm (l x w x h) Ksdjzrxgwopfx Albenc - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, operating hours: 11,562 h, total height: 1,900 mm, total length: 5,600 mm, total width: 2,000 mm, Empty weight: 8.500 kg Price: On request Knedjwp H Efspfx Alboc - Operating hours: 11562 - Drive system: Conventional - Power [kW]: 30.0 - Centre height [mm]: 500 - Swing over bed [mm]: 1000 - Distance between centres [mm]: 3000 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 2.24 - Max. spindle speed [rpm]: 450 - Transport dimensions: 5600mm x 2000mm x 1900mm (l x w x h) - Transport weight [kg]: 8500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 10,560 mm, total width: 1,710 mm, total height: 1,400 mm, Colour: Green Empty weight: 9.000 kg Price: On request - Drive system: Conventional - Power [kW]: 22.0 - Centre height [mm]: 315 - Swing over bed [mm]: 630 - Carriage turning diameter [mm]: 360 Knodpoyg Hi Rsfx Albsc - Distance between centres [mm]: 6000 - Bed width [mm]: 700 - Spindle bore [mm]: 62 - Min. spindle speed [rpm]: 8 - Max. spindle speed [rpm]: 1180 - Options: Digital readout - Type of digital readout: Sony - Transport dimensions: 10560mm x 1710mm x 1400mm (l x w x h) - Transport weight [kg]: 9000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, machine/vehicle number: 008495, X axis working area: 4175 mm Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Knjdjy Edqqspfx Albec Maximum edge height: 45 mm Total number of drilling spindles: 21 Total number of tool changer positions: 12