Used Horizontal Cartoner for sale (6,566)

Condition: used, Year of construction: 2007, operating hours: 20,000 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, nominal power (apparent): 49 kVA, controller manufacturer: Okuma, controller model: OSP-P200M, table width: 400 mm, table length: 400 mm, table load: 400 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 58,000 h, coolant supply: 30 bar, spindle motor power: 22,000 W, spindle nose: SK40 Big Plus, number of spindles: 1, number of slots in tool magazine: 100, input voltage: 400 V, type of input current: three-phase, pallet changer: automatic, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Well-maintained 3-axis Okuma MA-400HA horizontal machining center for sale The Z-axis module requires an overhaul. If more than 30% of the maximum rapid traverse speed is selected, the axis does not move. The machine is still in daily production and can be inspected at any time. The machine is offered including: - 100 SK tool holders (without tools) included - Renishaw OMP60 measuring system incl. probe and module (for tool breakage control and tool length measurement via mechanical touch sensor) - Expanded control options (larger storage for offsets, tool corrections, axis mirroring, manual measurement, scaling up/down) - DNC-DT interface - 30 bar through-spindle coolant supply Dkodpeyvga Usfx Agvon - 6 pallets incl. fixtures for machining round parts. Smallest fixture diameter 160mm, largest fixture diameter 370mm - Mayfran Consep 2000 II chip conveyor including nonwoven-free coolant filtration system

Condition: good (used), Machine number: 2082 Type / Model: F315 Control: conventional travel x-y-z: 820 x 300 x 440 mm Dkjdeh Rawfspfx Agven table: 1250 x 335 mm table clamping area: 1100 x 225 mm speed range: 56 to 2800 rpm spindle mounting: SK 40 Feed rate: 10 to 630 m/min rapid traverse: Connection: 6 kW Accessories/equipment: Condition: good weight: 2 t dimensions: 1700 x 2000 x 1900 mm

Condition: used, Year of construction: 1999, Technical details: x-travel: 690 mm y-travel: 400 mm z-travel: 550 mm B-axis (table): 360° mm control: Siemens 840 D number of spindle speeds: max. 15 000 U/min tool clamping: System nach DIN 69893 tool taper: HSK-A63 tool changer magazine: chain magazine: 12 places Stück traversing speed: x/y/z Axis: 40 total power requirement: 195 kW weight of the machine ca.: 13,0 t Traveling Column Milling Machine - the tool changing unit consist of 3 -NC axis and 1 NC- rotary table axis - ATC ( with magazine) - rotary table Type SKH-NC 4/029, diameter=460mm , table surface plate Ø 500 x20mm, revolution per minute max. 22 rpm - control panel SIEMENS - Spindel-Typ: DRF-WE-255-N-W-15-30, 15000 U/min., Spindelleistung = 30 kW - chip conveyor Make Knoll type 400K-3/280, ejection height 1150mm - cooling system for spindle make SCHIMBKE Type DK 80V, 3,36 kW i.D. Dedpfsu Idl Ssx Agvekn *

Condition: used, Technical details: x-travel: 450 mm y-travel: 150 mm z-travel: 400 mm distance between column - table edge: min./max.: 100 / 250 mm turning speed range: 25, 44, 78, 130, 228, 400 / 6 step U/min Dkedpfx Aou Nc Nlsgvjn feed:: X/Y: 10 - 100 / 8 step mm/min Table dimensions: 990 x 300 mm table surface area: 800 x 195 mm table swivelabel +/-: 30° ° total power requirement: nicht bekannt kW weight approx.: 1200 kg dimension machine xH: 1,5 x 1,3 x 1,5 m Horizontal milling machine, currently a tool clamped milling arbor Ø 32mm with hobbing cutter. Machine vice included. *

Condition: used, Year of construction: 1978, Technical details: table surface area: 1970 x 400 mm distance between table/spindle: min./max. 150 / 250 mm rapid traverse: 1 / 2 m/min revolution per minute: Frässpindel: 112 ... 1400 / 12 step U/min milling spindle taper: DIN 2019 = Nr. 40 (SK40) Dsdpfx Asu Ndhiogvokn axial adjustment: manuell = 150 mm quill feed: 0,012 / 0,025 / 0,05 mm/U feed range - horizontal: Frässchlitten: 8...100 / 12 step mm/min total power requirement: ca. 8,4 (10,5 kVA) kW machine weight approx.: 3000 kg dimension machine xH: 3,05 x 2,7 x 2,0 m wedge-groove milling machine Application: Milling of straight and helical grooves. Multiple groove milling with automatic program sequence. Further features: - distance spindle axis / lower edge counterholder: 55 mm - axial movement of the counter bearing sleeve 50 mm - milling carriage movement horizontal 1000 mm (automatic + manual by hand) and vertical 100 mm by hand + max. 5mm automatic/hydraulic Equipment: - chip container 470x300x300mm - 2x oil collecting basins (3200x1500x70 and 3200x800x60mm) - some accessories/tools *

Condition: used, Year of construction: 1986, Technical details: cutting diameter: 320 mm saw band length: 5320 mm saw band width: 32 mm cutting range 90 degrees: round: 320 mm cutting range 90 degrees: flat: 320 x 320 mm control: Serie P 9521 height over floor: 730 mm band speed: 15 - 110 m/min total power requirement: 4,9 kW machine weight approx.: 2200 kg dimension machine xH: 1,9 x 2,95 x 1,8 m Heavy-duty hydraulic production band saw in 2-column design - fully automatic Application for: Solid and profile materials made of steel as well as cast iron, light and non-ferrous metal Hydraulic material feed, hydraulic clamping of the clamping jaws Length measurement via precision glass measuring rod length 400mm Max. cut-off length preselectable 9999.9mm Automatic multiple stroke Saw band cleaning brush + 1x spare brush Dkjdpfx Agsu Nii Soven Chip conveyor Coolant device *

Condition: used, Year of construction: 2022, Technical details: cutting diameter: 128 mm saw band length: 1640 x 13 mm saw band width: 0,64 mm Dkedpfx Agou Nig Revsn cutting range 90 degrees: round: 128 mm cutting range 90 degrees: flat: 100 x 150 mm cutting range 45 degrees: round: 90 mm cutting range 45 degrees: square: 90 x 75 mm band speed: 24 - 35 - 55 m/min electrical connection: 220 V / Hz. total power requirement: 500 Watt machine weight approx.: 80 kg dimension machine xH: 0,95 x 0,52 x 1,1 m The machine is unused-new, in the original box. The band saw can be moved manually. Application for steel, cast iron and non-ferrous metals. Workpiece clamping by means of clamping jaws by hand wheel, 1x fixed and once movable, clamping range 165mm, swivel range 60°. limit stop for length adjustment max. 85mm i.D. *

Condition: used, Technical details: Dsdsv Sz Dispfx Agvokn x-travel: 1000 mm y-travel: 350 mm z-travel: 400 mm distance between column - table edge: min.150 / max. 550 mm turning speed range: 28 - 1400 / 18 step U/min tool taper: SK40 spindle head swivable left - right: 90° und vor/zurück: 45° ° feed:: X/Y-Achse: 16 - 800 / 18 step mm/min Table dimensions: 1600 x 400 mm table surface area: 1400 x 330 mm total power requirement: 14,5 kW weight approx.: 4000 kg dimension machine xH: ca. 2,0 x 2,4 x 1,85 m

Condition: used, Technical details: Dkodpfsv T Tcmjx Agvjn cutting diameter: 260 mm saw band length: 2925 mm saw band width: 0,9 mm cutting range 90 degrees: round: 270 mm cutting range 90 degrees: flat: 350x240 mm cutting speed: 35/72 m/min height over floor: 1,050 mm total power requirement: 1,9 kW machine weight approx.: 660 kg dimension machine xH: 1,2 x 0,75 x 1,05 m Bandsäge - Halbautomat schwere Industriebandsäge mit Rollenbahn Gehrungsschnitt möglich hydr. Werkstückklemmung i.D. *

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 27 mm saw band length: 2910 mm Dsdpjy E Hynjfx Agvskn saw band width: 0,9 mm span width: 320 mm dimensions of saw-band: 2910 x 27 x 0,9 mm band speed: 20 - 120 m/min electrical connection: 400/50/60 V / Hz. total power requirement: 1,5 kW machine weight approx.: 390 kg dimension machine xH: 1480 x 1700 x 2000 m

Condition: used, Technical details: cutting diameter: 310 mm cutting width: 360 mm Dksdpfsu Niifex Agvsn total power requirement: ca. 1,8 kW Miter cutting possible Workpiece clamping hydraulic bracket lowering hydraulic incl. roller conveyor entrance approx. 2100mm and exit approx. 2700mm *

Condition: used, Technical details: cutting diameter: 260 mm saw band length: 4310 mm saw band width: 27 mm cutting range 90 degrees: round: 260 mm cutting range 90 degrees: square: 260 x 260 mm band speed: 17 - 110 m/min electrical connection: 400/50 V / Hz. total power requirement: 3,5 kW machine weight approx.: 1000 kg dimension machine xH: 2,3 x 1,0 x 1,4 m Dksdpfxjy Dc N Ae Agven dimensions L x W x H: 3,0 x 0,4 x 0,8 m

Condition: used, Technical details: pressure: 160 t table surface area: 1.260 x 600 (vertical) mm table plate diameter: 1260 x 600 x 70 (vertical) mm ram surface area: 700 x 360 mm throat: 300 mm weight of the machine approx.: 9000 kg dimensions L x W x H: 3,7 x 1,5 x 2,2 m distance base - ram: 1.000mm mounted ram construction: L:660 x W:300 x H:370mm rollers 1x on the right and 1x on the left with vertical adjustment 250mm. (Ø 80x300mm) Dkjdpfxou Nfpuj Agvsn *

Condition: used, Year of construction: 1984, Technical details: x-travel: 400 mm y-travel: 100 mm z-travel: 100 mm electrics - voltage/frequency: 380/50 V/Hz total power requirement: 0,8 kW machine weight approx.: 132 kg space requirements of the machine approx.: 1,6 x 0,6 x 1,4 m This milling machine is ideally suited for window. - long hole milling machine for aluminium Dksdpfju Nc Nxsx Agvjn - pneumatic tool clamping - feeder: hand lever operation - safety device: 2,2 V *

Condition: used, Technical details: pressure: 200 t stroke: ca. 200mm mm table surface area: L:1200xH:450 mm jaw width: 1000x200 mm total power requirement: 18 kW weight of the machine ca.: 15 t dimension machine xH: 4,5x1,5x2,2 m Beam - Straight Bending Machine - electric box (LxWxH:0,85x0,8x2,7m) Dsdpfeu Nfrpox Agvokn - chuck intake: LxW 1200x220mm - chuck adjustment 200mm moveable - opening width of chucks 300mm - manual control accessories: - div. limit stops, tools, try square and marking gauges i.D. *

Condition: used, Year of construction: 1991, Technical details: cutting diameter: 240 mm saw band length: 3000 mm saw band width: 20 x 0,8 mm cutting range 90 degrees: round: 240 mm band speed: 20; 35; 50; 70 m/min total power requirement: 1,8 kW machine weight approx.: 330 kg dimension machine xH: 1,9 x 1,1 x 1,1 m hydraulic operation clamping jaw size 150 x 100mm, manual clamping (hand wheel) 1 transport roller each before and after vice support incl. 4 pieces band saw blades Dksdpfju Nihujx Agvsn incl. 2 pieces roller tables (2000 x 520 x 750mm and 1000 x 520 x 750mm) incl. limit 3000mm *

Condition: used, Technical details: cutting diameter: 460 mm saw band length: 4670 mm saw band width: 45 mm cutting range 90 degrees: round: 460 mm cutting range 90 degrees: square: 320 x 500 mm band speed: 16...160 m/min feed stepless: ja / jes / Sí mm/min Dsdpsu Niixefx Agvokn electrical connection: 380 V / Hz. total power requirement: ca. 7,5 kW machine weight approx.: 2900 kg dimension machine xH: 2,8 x 2,45 x 1,7 m dimensions L x W x H: Rollenbahn: 1,1 x 0,6 x 0,3 m FULLY AUTOMATIC BANDSAW Manual and automatic operation Multiple stroke = single up to 580mm and multiple up to 5220mm Tension via clamping jaws WxH: 100 x 250mm motorized band tensioning Saw blade cooling piece counter Lubrication of the saw blade guide Accessories: Infeed track, motor-driven, LxW: 1300mm x 530mm Outfeed track LxW: approx. 1000mm x 750mm *

Condition: good (used), Year of construction: 2011, travel distance X-axis: 1,200 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,200 mm, Travel path B: 0-360° Dkedpsza Dzwofx Agvjn Travel path A: +45° to -90° Spindle interface: HSK 100 Rotary spindle diameter: 200 mm Spindle speed: 15,000 rpm Chain magazine: 60 positions Pallet changer Chip conveyor High-pressure coolant through spindle Coolant filtration system

Condition: good (used), Year of construction: 2011, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, Tool holder: HSK 63 Turning spindle: 85 Spindle speeds: 20,000 rpm Chain magazine: 60 positions Chip conveyor Pallet changer Coolant filter unit High-pressure coolant through spindle Djdpsza Drvjfx Agvekn

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 14023, travel distance X-axis: 1,140 mm, travel distance Y-axis: 910 mm, travel distance Z-axis: 875 mm, rapid traverse X-axis: 60 m/min, torque: 1,000 Nm, controller manufacturer: Siemens, controller model: 840 D, spindle speed (min.): 6,000 rpm, coolant supply: 60 bar, distance table center to spindle nose: 240 mm, Equipment: chip conveyor, documentation/manual, Siemens 840 D with network connection SK50 DIN69871 - pull stud DIN69872 6000 rpm, 2 gearbox speeds, max. torque 1000 Nm Tool changer chain with 80 positions 2 pallets 800x800, M16 hole grid High-pressure coolant through spindle, 50 bar Knoll paper band filter and chip scraper conveyor Djdpfx Asv Npm Hegvekn Year of manufacture Dec. 1999 (maximum single-shift operation)

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (max.): 800 rpm, spindle speed (min.): 4 rpm, table length: 1,800 mm, table width: 1,600 mm, table load: 10,000 kg, total height: 3,800 mm, total length: 7,030 mm, total width: 4,665 mm, spindle diameter: 130 mm, spindle motor power: 15,000 W, MTP TPX6113-2 HORIZONTAL BORING MACHINE Horizontal Boring Machine TPX6113/2 – Precision and Power for Heavy Machining The TPX6113/2 horizontal boring machine is a robust and efficient solution designed for precise machining of large and heavy workpieces. Thanks to its rigid construction and high technical performance, it is ideally suited for use in the mechanical, energy, and steel structure industries. The machine is equipped with a Ø130 mm spindle, ensuring high stability and enabling demanding machining operations. A powerful 15 kW main motor and high torque guarantee efficient performance even under heavy loads. The large worktable (1800 × 1600 mm) with a maximum load capacity of 10,000 kg allows machining of heavy components without compromise. The full table rotation (B axis – 360°) increases flexibility and enables multi-side machining without repositioning the workpiece. Technical Specifications: Spindle diameter: Ø130 mm Max spindle torque: 3136 Nm Max spindle feed force: 31,360 N Number of spindle speeds: 24 Djdpfx Agoy Eyg Uovjkn Spindle speed range: 4–800 rpm Main motor power: 15 kW Max facing head torque: 4900 Nm Facing head diameter: 750 mm Facing head speed range: 2.5–125 rpm Number of facing head speeds: 18 Table size: 1800 × 1600 mm Max table load: 10,000 kg T-slots: 28 mm × 10 Axis travels (X/Y/Z/W/U): 2000 / 1800 / 2000 / 900 / 250 mm Table rotation (B axis): 360° Rapid feed (X/Y/Z/W): 2500 mm/min Feed per spindle revolution (X/Y/Z/U): 0.05–8 / 0.01–2 mm/rev Measurement system accuracy (X/Y/Z): 0.005 mm (Z optional) Measurement system accuracy (B axis): 0.001 mm (optional) Dimensions: 7030 × 4665 × 3800 mm Machine weight: 29,300 kg

Condition: ready for operation (used), Year of construction: 1997, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 1500 mm Dkedpfx Ajh Hfrnsgven Y-AXIS TRAVEL: 1200 mm Z-AXIS TRAVEL: 1250 mm SPINDLE: 10-4000 rpm; 40 kW; HSK-A 100 PALLET: CONTINUOUS ; 1000X1000 mm; 1-500 rpm MAX ADMITTED LOAD: 2000 Kg TOOL MAGAZINE: CHAIN-TYPE ; 161 POS CONTROL UNIT: SIEMENS 840 C OVERALL DIMENSIONS: 8500 x 4800 x 4800 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER NOTE: COMPLETELY OVERHAULED MACHINE; HORIZONTAL AND VERTICAL AUTOMATIC HEAD; TURNING TABLE

Condition: used, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 800 mm, controller model: Fanuc 6M, spindle motor power: 15 W, Technical Specifications Manufacturer: OKK Model: MCH-800 Year: 1989 Axis Travels (X/Y/Z) X-axis: 2006 mm Y-axis: 1000 mm Z-axis: 800 mm Table & Rotary Index Table Table size: 2202 × 800 mm Rotary indexing table: 800 × 800 mm Table load capacity: - Indexing load: 1,500 kg - Flat load: 3,000 kg Spindle Speed range: 30 – 3,000 rpm Taper: BT50 Main motor power: 15 / 11 kW (20 / 15 HP equivalent) Equipment - 50-station Automatic Tool Changer (ATC) - FANUC 6M CNC control - Extremely rigid Japanese construction - Large travels and robust rotary table Hsbnjxyzzyoz T Rm Don Weight Total machine weight: 16,500 kg Column: 8,500 kg Table section: 8,000 kg Dkedpfx Ajxyzzyjgvjn Description This OKK MCH-800 is a classic Japanese horizontal machining center from the era when OKK machines were engineered for maximum rigidity and long-term mechanical reliability. Featuring a BT50 spindle, generous travel dimensions, and an 800 mm rotary table, it is particularly suitable for machining steel components, heavy-duty roughing, and demanding production cycles. The Fanuc 11M control is reliable, easy to maintain, and still fully supported with spare parts.

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats Dsdpezaqlcefx Agvekn and other compressible materials. Press force: 400 kN Transport width: 1,767 m Transport height: 2,489 m Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg Bale length x width x height: 750 x 1200 x 750

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 5 rpm, feed length X-axis: 1,200 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 700 mm, feed rate X-axis: 1,000 m/min, feed rate Y-axis: 1,000 m/min, feed rate Z-axis: 1,000 m/min, total width: 4,000 mm, San Rocco Horizontal Boring Machine Fully overhauled San Rocco horizontal boring machine, originating from a high-end aerospace manufacturing facility. The machine is equipped with a Siemens SINUMERIK 840D CNC control system with SIMODRIVE 611 drive technology. The machine is fitted with modern digital drive systems and is designed for high-precision multi-axis machining in continuous operation. It was fully overhauled in 2024, including brand-new telescopic covers on all axes, as well as numerous additional essential refurbishments to the hydraulic system, CNC components, hoses, seals, and related assemblies. Travels X-axis (longitudinal): 1,200 mm Y-axis (cross): 2,000 mm Z-axis (vertical / spindle axis): 700 mm Spindle Data Boring spindle diameter: 100 mm Tool interface: ISO 50 Milling spindle diameter: 185 mm Spindle axial travel: 700 mm Feeds and Rapid Traverses Automatic feeds (spindle and vertical axis): 2 × 1,000 mm/min Rapid traverse (spindle and vertical axis): 5,500 mm/min Distances Minimum spindle height above table: 0 mm Maximum spindle height above table: 1,500 mm Maximum distance from spindle nose to table center: 1,850 mm Spindle Speeds Torque range: 5 to 14 rpm Continuous power range: 15 to 1,450 rpm Number of gearbox ranges: 4 Speed ranges: 6–51 / 49–160 / 140–460 / 440–1,450 rpm Table Data Rotary table size: 1,100 × 1,300 mm Longitudinal travel: 1,200 mm Cross travel: 2,000 mm Table Feeds Automatic feeds X and Y: 1,000 mm/min Rapid traverse X and Y: 5,500 mm/min Table Rotation Continuous rotation: 30 to 100 degrees per minute Rapid rotation: 5,000 degrees per minute Drive System Djdpfx Agsx Rhlcovskn Siemens SIMODRIVE 611 E/R module 36/47 kW LT modules 108 A and 2 × 25 A Lifting and Transport Data Group 1 Steel bar Ø 70 mm, length 1,600 mm Steel bar Ø 70 mm, length 2,400 mm Four spacer rings for lifting slings Four steel slings Ø 22 mm Weight approx. 12,500 kg Group 2 Two steel slings, minimum Ø 18 mm Weight approx. 3,500 kg Group 3 Manual lifting Weight approx. 1,300 kg Condition The machine is in very good technical condition and can be inspected and tested under power by appointment.