Used Horizontal Cartoner for sale (6,492)

Condition: used, tank capacity: 16,300 l, GENERAL Equipment: Crane lugs Design: horizontal External diameter: 2,000 mm Internal diameter: 1,800 mm Max. overpressure: 0.50 bar Location: Outdoor storage Technical documentation: drawing, available Nameplate: Njdpfsyci N Sex Ad Nscl Vacuum: 1.0 bar Volume: 16,300 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical length: 6,000 mm VESSEL Max. allowable operating temperature: 50 °C Supporting system: Saddles EQUIPMENT Outlet: available Outlet: 100 mm

Condition: used, tank capacity: 1,600 l, GENERAL INFORMATION Equipment: Crane lugs Design: horizontal Notes: 2 loose bearing shells made of V2A; manhole DN 500 Nedpfxjyci Egs Ad Njcl Internal diameter: 990 mm Total height: 1,700 mm Total length: 2,550 mm Location: Bremen Volume: 1,600 litres Cylinder wall thickness: 5.0 mm Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical length: 2,000 mm TANK Mounting type: saddle supports EQUIPMENT Manhole / dome: on the tank Outlet: flange DN50 TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 3.9 mm

Condition: used, tank capacity: 10,500 l, GENERAL INFORMATION Design: horizontal Remarks: saddles made of painted steel External diameter: 1,800 mm Overall width: 2,500 mm Overall length: 5,000 mm Location: outdoor storage Volume: 10,500 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical length: 4,000 mm TANK Ends: Klöpper head Support type: welded saddles Njdpfx Adoyci Dcs Njcl EQUIPMENT Manhole / inspection opening: in the cylinder Outlet: flange Outlet diameter: 150 mm MATERIAL SPECIFICATION Foot material: steel

Condition: used, tank capacity: 42,000 l, GENERAL Equipment: Level indicator (without guarantee), spray head Design: horizontal External diameter: 3,000 mm Total width: 3,100 mm Total height: 3,650 mm Total length: 6,900 mm Location: Outdoor storage Volume: 42,000 liters Product-contact material: V2A 1.4301 (AISI304) Ncodpfx Aeyci Afed Njl Condition: used Cylindrical length: 5,900 mm Last use: foodstuffs VESSEL Ends: Klöpper head Support type: height-adjustable feet Number of feet: 6 pcs EQUIPMENT Manway / dome: in top head Outlet: present Outlet: 65 mm MATERIAL SPECIFICATION Material of feet: stainless steel

Condition: used, tank capacity: 42,000 l, GENERAL INFORMATION Nsdpfxjyciz Uo Ad Njcl Equipment: Level indicator (no guarantee), spray head Construction: horizontal Speed: 975 rpm External diameter: 3,000 mm Total width: 3,100 mm Total height: 4,050 mm Total length: 6,900 mm Agitator manufacturer: Stelzer Power: 11 kW Agitator: propeller Agitator element: propeller Location: Outdoor storage Volume: 42,000 liters Product contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical length: 5,900 mm Previous application: foodstuffs TANK Ends: dished ends (Klöpperboden) Support type: height-adjustable feet Number of feet: 6 pcs EQUIPMENT Manhole / dome: on upper head Outlet: available Outlet: 65 mm MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR Agitator manufacturer: Stelzer Agitator positioning: on the tank AGITATOR 2 Agitator positioning: on the tank Speed: 975 rpm Power: 11.0 kW

Condition: used, tank capacity: 53,000 l, GENERAL Construction: horizontal Remarks: 3 reinforcement rings made of Fe, each with 2 feet (Note: tank diameter is lower than the tank feet; consider this during installation); 1 manhole in the front dished end Internal diameter: 3,000 mm Total length: 7,900 mm Heating/cooling: available Location: outdoor storage Cylinder temperature control: rectangular half-pipe coil Name plate: Ncjdpfx Adsyciyqo Nel Volume: 53,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical length: 6,750 mm Previous use: brewery TANK Support design: feet Number of feet: 6 pieces EQUIPMENT Outlet: available MATERIAL CHARACTERISTICS Temperature control system material: V2A 1.4301 (AISI304) Feet material: steel

Condition: used, tank capacity: 72,500 l, GENERAL Equipment: Spray head Design: horizontal Remarks: 6 reinforcement rings Fe with 2 feet each (Note: tank diameter lower than tank feet; consider when positioning); manhole in front end Internal diameter: 2,800 mm Total length: 13,100 mm Heating/cooling: available Location: outdoor storage Austria Cylinder temperature control: rectangular half-pipe coil Volume: 72,500 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical length: 12,000 mm Last application: brewery TANK Support type: feet Number of feet: 12 units MATERIAL SPECIFICATIONS Ncsdpfxsyciyks Ad Nel Temperature control system material: V2A 1.4301 (AISI304) Feet material: steel

Condition: used, tank capacity: 715 l, GENERAL Equipment: Level indicator (without guarantee) Design: horizontal Remarks: 1 manhole with a 400 mm diameter in the front end Internal diameter: 790 mm Total height: 1,750 mm Total length: 2,100 mm Nodpsyciwvofx Ad Nocl Max. overpressure: 2.0 bar Location: Bremen Nameplate: Volume: 715 litres Product-contact material: V4A 1.4429 (AISI316) Condition: used Cylindrical length: 1,230 mm Last application: Biochemistry TANK Max. permitted operating temperature: 200 °C Support type: feet Number of feet: 3 pcs EQUIPMENT Outlet: 43 mm Note: light residues, manhole cover plated MATERIAL SPECIFICATION Foot material: steel

Condition: used, total height: 2,500 mm, total length: 5,000 mm, total width: 2,200 mm, Empty weight: 5.500 kg Price: On request - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 12598 - Drive system: Teach-in - Power [kW]: 15.0 - Centre height [mm]: 350 - Swing over bed [mm]: 700 - Carriage turning diameter [mm]: 425 - Distance between centres [mm]: 2000 - Bed width [mm]: 450 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 310 - Max. spindle speed [rpm]: 2000 - Max. workpiece weight [kg]: 4000 - Options: Digital readout, Removable bed - Type of digital readout: Heidenhain Manualplus - Transport dimensions: 5000mm x 2200mm x 2500mm (l x w x h) Nodpfx Ajwnhm Isd Nocl - Transport weight [kg]: 5500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 1,600 mm, total length: 5,000 mm, total width: 1,600 mm, Empty weight: 3.190 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 315 - Swing over bed [mm]: 630 - Distance between centres [mm]: 3000 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 10 - Max. spindle speed [rpm]: 1000 - Options: Digital readout, Removable bed - Swing over removable bed [mm]: 900 - Type of digital readout: 2 assen - Transport dimensions: 5000mm x 1600mm x 1600mm (l x w x h) - Transport weight [kg]: 3190kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ncsdswnitiopfx Ad Njl Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2013, total height: 2,240 mm, total length: 5,240 mm, total width: 2,500 mm, Empty weight: 2.700 kg Price: On request - Year: 2013 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: AA1/017355 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 9.5 - Drilling unit present: No - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Working range X [mm]: 3050 - Working range Y [mm]: 1250 Nedpfxownii Re Ad Nscl - Z-axis working range [mm]: 1810 - Y-axis maximum stroke [mm]: 1550 - Voltage [V]: 400 - Current consumption [A]: 31 - Transport dimensions: 5240mm x 2500mm x 2244mm (l x w x h) - Transport weight [kg]: 2700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2012, CNC machining centre SCM Morbidelli M-600 5-axis machine Year of construction 2012 Machine no. AA2/002032 Working distance X-axis 5020 mm Working distance Y-axis 1680 mm Working distance Z-axis 250 mm Tool positions 36 Vertical drilling spindles 24  Software SCM XILOG MAESTRO SCM PRISMA K SCM TTS system Milling spindle liquid-cooled SCM TecPad MORBIDELLI TV Matic SCM PRO-SPACE SCM RAPID 12 SCM RAPID 24 Including vacuum pump Capacity 250 m3/h Disassembled for transport Weight 7450kg - Year: 2012 - Documentation available: No - CE certificate present: No - Serial number: AA2/002032 - Drilling unit present: Yes - └ Vertical drilling spindles [pcs.]: 24 Ncjdpfxjwnhcco Ad Njl - Tool changer positions [pcs.]: 36 - System/software: SCM Maestro - Vacuum pump present: Yes - └ Capacity [m³/h]: 250 - Working range X [mm]: 5020 - Working range Y [mm]: 1680 - Z-axis working range [mm]: 250 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Control: SIEMENS 840D Number of pallets: 2 Number of axes: 5 Number of spindles: 2 Tool holder: HSK63 Spindle drive power: 15.5 kW Spindle speed: 17500 rpm Spindle clearance (distance): 300 mm LINEAR AXES Travel X/Y/Z: 300 x 650 x 400 mm Rapid traverse rate (X/Y/Z): 75,000 mm/min ROTARY AXIS A Travel: 360 degrees Minimum resolution: 0.001 degrees ROTARY AXIS C Travel: 360 degrees Minimum resolution: 0.001 degrees Number of tools in magazine: 2 x 32 PALLET CHANGER Max. table load: 300 kg Electrical Power Supply Power supply: 400 V Total connected load: 70 kVA Weight and Dimensions Floor space requirements: 3900 x 3260 mm Machine height: 3100 mm Machine weight: 8800 kgs Accessories / Equipment Interface: Ethernet / RS232 / PCMCIA Coolant tank: 400 l With high-pressure pump: 70 bar With paper belt filter: KNOLL PF160/800 With coolant cooling system Internal Coolant Supply (ICS) Chip discharge: Rear Oil mist extractor: LOSMA Darwin 1200 Spindle cooler Ncsdpfx Adoycg R Ho Nel The machine is in good used condition. Available under power in Hungary.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 3,300 h, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 1050 mm Y-AXIS TRAVEL: 900 mm Ncedpfx Aoxvfuvjd Nol Z-AXIS TRAVEL: 1000 mm DISTANCE SPINDLE NOSE-TABLE: 100 - 1100 mm RAPID FEEDS X-Y-Z: 60 m/min SPINDLE: 10000 rpm; 25-45 kW; 600 Nm; ISO 50 - BT PALLET: N.2 ; CONTINUOUS ; 630x630 mm MAX ADMITTED LOAD: 1500 Kg MAX MACHINABLE PIECE DIMENSIONS: ø1050 x 1350 mm TOOL MAGAZINE: CHAIN-TYPE ; 90 POS CONTROL UNIT: FANUC 31i WEIGHT: 18000 Kg OVERALL DIMENSIONS: 6520 x 3930 x 3495 mm ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER

Condition: ready for operation (used), Year of construction: 1997, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 1500 mm Y-AXIS TRAVEL: 1200 mm Z-AXIS TRAVEL: 1250 mm SPINDLE: 10-4000 rpm; 40 kW; HSK-A 100 PALLET: CONTINUOUS ; 1000X1000 mm; 1-500 rpm MAX ADMITTED LOAD: 2000 Kg TOOL MAGAZINE: CHAIN-TYPE ; 161 POS CONTROL UNIT: SIEMENS 840 C OVERALL DIMENSIONS: 8500 x 4800 x 4800 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER NOTE: COMPLETELY OVERHAULED MACHINE; HORIZONTAL AND VERTICAL AUTOMATIC HEAD; TURNING TABLE Ncjdpfxoh Hfrno Ad Nel

Condition: used, Year of construction: 2001, Cutting width: 3300 mm Cutting length: 3350 mm Weight: approx. 4000 kg Saw blade projection: 100-(115) mm Saw carriage: Feed speed: 100-(130) m/min. Return speed: 100-(130) m/min. Main saw blade: 400-(430) mm Motor: 7.5-(11-13.2) kW Scoring unit: 215 mm Motor: 2.2 kW Pusher: Rapid feed: 160 m/min. Return speed: 60 m/min. Extraction: Air speed: 30-35 m/sec. Extraction nozzle: 200 mm / 115 mm Compressed air: Pressure: 5-6 bar Consumption: 20-30 l/min. Storage location: Nattheim Ncsdevvkqgspfx Ad Nol

Condition: excellent (used), Year of construction: 1992, max. wheel diameter 130 mm gear width 400 mm max. module 3 Ncsdpsyb S R Asfx Ad Nsl min. module 0,5 Control Bosch CC 220 milling spindle speeds (infinitely variable) 300 - 1200 U/min clamping length max. 1160 mm swivel angle for work spindle +/- 45 ° x-travel 230 mm y-travel 170 mm z-travel 400 mm spindle speeds 1 - 125 mm total power requirement 52 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 4,8 x 3,8 x 2,5 m Machine in very nice condition!

Condition: used, Year of construction: 2006, x-travel 800 mm y-travel 800 mm z-travel 800 mm Control Siemens 840 D total power requirement --- kW weight of the machine ca. 19,0 t Ncodpoyb S H Rsfx Ad Njl dimensions of the machine ca. --- m

Condition: used, Year of construction: 1997, - Year: 1997 - Documentation available: Yes - CE marking present: Yes Ncsdpfewnh I Sex Ad Nsl - CE certificate present: No - Serial number: 270 - Drive system: Teach-in - Centre height [mm]: 210 - Swing over bed [mm]: 420 - Distance between centres [mm]: 900 - Spindle bore [mm]: 55 - Min. spindle speed [rpm]: 4 - Max. spindle speed [rpm]: 3000 - Options: Digital readout - Type of digital readout: Weiler - Control: CNC Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2018, total height: 2,200 mm, total length: 4,550 mm, total width: 2,200 mm, Empty weight: 3.000 kg Price: On request - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AH00000267 - Drilling unit present: Yes - Saw unit present: Yes - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Main motor power [kW]: 2.2 - └ Connection diameter [mm]: 33 - Working range X [mm]: 3050 - Working range Y [mm]: 1250 - Z-axis working range [mm]: 130 - Transport dimensions: 4550mm x 2200mm x 2200mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ncodpsxn S H Njfx Ad Nel Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2014, CNC Machining Center Biesse skill 12 24 G FT Year of construction 2014 Machine no. 60961 Recording HSK F63 10x vertical drilling 12 switch positions Software: BiesseWorks X axis 2465 mm Y-axis 1260 mm Z axis 324 mm Disassembled for transport on normal trailer; 4500x2200x2400mm; Own weight 2000kg Ncedownhanspfx Ad Nel - Year: 2014 - Documentation available: Yes - CE certificate present: No - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 12 - Working range X [mm]: 2465 - Working range Y [mm]: 1260 - Z-axis working range [mm]: 324 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2006, total height: 1,750 mm, total length: 2,790 mm, total width: 1,570 mm, Empty weight: 4.300 kg Price: On request - Year: 2006 - Documentation available: Yes - CE certificate present: No - Serial number: GN08201038G - Drive system: CNC - Control system brand: Fanuc - Control system type: 0i-Mate TO - Power [kW]: 15.0 - Swing over bed [mm]: 250 - Distance between centres [mm]: 460 - Spindle bore [mm]: 62 - Max. spindle speed [rpm]: 4500 - Options: Removable bed - Swing over removable bed [mm]: 460 - Transport dimensions: 2790mm x 1570mm x 1750mm (l x w x h) Ncjdpfx Adswfpaqj Nsl - Transport weight [kg]: 4300kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1990, condition: used, total length: 4,800 mm, total width: 1,700 mm, total height: 2,000 mm, Empty weight: 5.500 kg Price: On request - Year: 1990 - Documentation available: Yes - CE certificate present: No - Serial number: 3242 - Drive system: CNC - Swing over bed [mm]: 520 - Carriage turning diameter [mm]: 350 - Distance between centres [mm]: 1125 - Spindle bore [mm]: 50 - Min. spindle speed [rpm]: 42 Nedjx Ivnyjpfx Ad Necl - Max. spindle speed [rpm]: 4200 - Options: Chip conveyor, Turret - └ Tool magazine [pcs.]: 10 - X-axis travel [mm]: 1090 - Y-axis travel [mm]: 160 - Transport dimensions: 4800mm x 1700mm x 2000mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2014, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Machine available from: 2026-03-30 - Year: 2014 Ncjdpfsx Hwhxox Ad Nel - Documentation available: No - CE certificate present: Yes - Serial number: AA1/017825 - Number of milling spindles [pcs.]: 1 - Type milling table: Beam table - Drilling unit present: Yes - Tool changer positions [pcs.]: 12 - CNC documentation available: USB stick - Table length [mm]: 5200 - Table width [mm]: 1550 - Z-axis working range [mm]: 160 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: ready for operation (used), Model: JUNGHEINRICH Type: ECE 220 Year of manufacture: 2005 Lifting height: 150mm Load capacity: 2000 kg Operating hours: 17495h Nsdpfx Adjwqdfls Njcl Fork length: 2400mm