Used Horizontal Bandsaw Wood for sale (21,420)

Year of construction: 2015, condition: excellent (used), Horizontal conveyor 3000x800mm year 2015 price: €2,450.00 Iedju N Aqcspfx Afiotn contact: Mr. Rainer Eckerle

Condition: new, Year of construction: 2023, Wood gasification technology that converts biomass (wood chips) into wood gas. The obtained wood gas is used in the production of electricity and heat. Gasifiers are reaching electrical efficiency up to 30% and with fuel utilisation rate up to 90%. The capacity of one unit is up to 140 kWel and heat up to 300 kWth. System is modular and can be used both for small project and also larger plants with electrical power up to 2000kWel and heat up to 4000kWth. Energy-producing systems are additionally equipped with wood gas filtration and cooling systems, ash removal, and emergency cooling systems. Offer for one unit include : - Wood chip feed module - Gasifier - Control cabinet for gasifier - Air preheater - Gas filter - Gas cooling module - Safety filter module - Ash discharge module Iedepa Sthopfx Afistn - Cold start module - Waste bunker - Wiring set - Engine unit with generator - Control cabinet for engine - Gasifier chimney for cold start - Chimney for engine

Condition: used, Double edger EG100, year of manufacture 2022, very good condition, max. board thickness 50 mm, max. edge width 300 mm, 7.5 kW, 2 knives Iedovr I Ihopfx Afistn Prices subject to change, errors, printing and typesetting errors reserved

Condition: good (used), Protech Horizontal Collator Model: HC2010 Itsdpfov T D Dujx Afisn Plastic belt, belt width: 250 mm Distance between dividers: 200 mm, divider height: 150 mm Clearance: 140 mm x 150 mm Total dimensions: 2900 mm x 560 mm x 1540 mm.

Condition: refurbished (used), Kolbe stainless steel bandsaws and fixed table machines Roller tables in two sizes In excellent condition Choice of two Kolbe roller table bandsaws. Itsdjvzmm Uepfx Afisn

Condition: used, Woodmizer EG100 double edger, year of manufacture 2019, standard equipment, 8 kW, 2 saw blades, 512 kg Prices subject to change, errors, printing and typesetting errors reserved Iodpjvrvk Rsfx Afijtn

Condition: refurbished (used), Kolbe stainless steel Bandsaws - 7 machines in total Model K430 S Year 2018 Fixed table Itjdpfx Afsvzmmusien Excellent condition

Condition: new, functionality: fully functional, Year of construction: 2025, Product overviews of Waste Industrial Timber Wood Pallet Double Shaft Shredder Shredders can generally be used to shred hard-to-break plastics, rubber, large tires, large nylon materials, large pieces of fishing nets, fibers, paper, wood, electrical devices, cables, PET bottles, cardboard, wood, plastic barrels, etc. Solid objects. The main function of the equipment is to squeeze the bulk materials and large-diameter drum metal materials that are not convenient for transportation through the shear of the shredder, and shred them into sheets that meet the requirements. The main structure of the double-shaft shredder is a feed hopper, a knife roller, a driving device, a bearing, a hydraulic system, and an electric control box system. Working principle: All kinds of waste materials enter the shredding chamber through the feeding hopper. The double-knife rollers do relative rotation to shred and cut the materials, and then the materials are discharged from the shredder to achieve the shredding of large pieces of materials. Applicable materials and fields Double shaft shredder is one of ethential equipment for waste recycling in following fields and materials: +Bulky Waste: Sofa,Mattress,Chair, Funiture,Windows,etc +Industrial Waste: Textiles,Leather,Rubbers, Leathers ,General industrial waste,etc +Hazardous Solid waste: Medical waste,Paint sludge,Radioactive waste,Hazardous waste oil drum,Jumbo bag,etc +Paper waste: Carton,Cardboard,Book,Newspaper,Document,Brochure,Packaging paper,etc +Garden waste: Branch, Wood pallet, Trunks, Boards,etc +Domestic waste +Biomass straw: Straw, Bamboo, Corn, Sorghum straw, Bean straw, Fruit shell, Palm shell, etc +Scrap metal: Car Shell, Aluminum casting, Household appliances, Scrap light metal,Automobile hub,etc +Paper mill waste: Paper mill slag, Paper mill rope, Paper mill offcut,etc +Wood pallet, scrap furniture, waste chair, tree roots recycling, etc. Iedpfjvn D I Nex Afiotn Double shaft shredder main body: The main body is welded with excellent steel plate to ensure the stability of the equipment under heavy load for a long time. Bearing: The bearing seat is split and easy to disassemble, and the movable knife, fixed knife, bearing and other parts can be quickly removed, and it is easy to maintain and replace the knife. The sealing structure can avoid the contact of broken materials and grease, and can also protect bearings and gears when handling liquid materials.

Condition: ready for operation (used), Table size: 1300x1100mm X: 1300mm Y: 1300mm Spindle stroke 500 mm Itedpfx Afjh E Dnheisn UNDER STRAW !!!

Condition: new, Year of construction: 2025, functionality: fully functional, Purpose and Application Area A horizontal or orbital wrapper is an automatic or semi-automatic packaging machine designed for wrapping long goods, profiles, doors, panels, pipes, furniture parts, or other large-format or elongated products with stretch film, nonwoven material, or similar packaging materials. The aim is to protect the goods from dust, moisture, scratches, and transport damage. Advantages: - All-round protection for products of various shapes and lengths Itodpexd Rgtefx Afion - Saves material and time compared to manual wrapping - Can be integrated into automated packaging lines - Adaptable to different product dimensions and types of film Technical Features: - Ring diameter: approx. 300 mm up to over 2,000 mm, depending on product size - Wrapping speed: up to 100 rpm (model-dependent) - Conveyor speed: adjustable - Wrapping material: PE stretch film - Power supply: Electric (typically 230/400 V, 50 Hz)

Condition: ready for operation (used), Year of construction: 2015, The StyleShoots Horizontal, designed for flatlay product photography, contains a Canon EOS 5D Mark III with a Canon EF 24-105mm f/4L IS USM lens. Length: 2820mm, width: 2160mm, height: 2600mm, very little documentation available, an inspection is possible. Isdpoqpgg Nefx Afijtn

Condition: used, overall weight: 30,000 kg, maximum load weight: 24,200 kg, axle configuration: > 3 axles, first registration: 11/2011, Equipment: ABS, Manufacturer HFR Model 30 t. 4 axles Timber transport / Wood transport Year 2011 Condition Good Serial Number UH9PX301125HF1141 Ref. nr. 7949 Reg. date: 25-11-2011 Last seen: 10-12-2024 Disc brake: ? ABS: ? Rear axles: BPW Iodpfjw N Uuyjx Afijtn Suspension: Air Tire Size: 265 / 70R19,5 Cover% left 100 - 100 - 80 - 100% Total weight: 30000 kg. Net weight: 5800 kg. Load capacity 24200 kg. Inside length: 7400 mm.

Year of construction: 2010, condition: excellent (used), Deflector spray scrubbers are an air pollution control technology. They are very similar to spray towers in design and operation. However, in addition to using the energy provided by the spray nozzles, baffles are added to allow the gas flow to atomize liquid as it passes over them. Isdpfx Aek D Hd Asfijtn

Condition: used, Year of construction: 2003, operating hours: 23,000 h, Liebherr 924 !!! SPECIAL EXCAVATOR FOR FOREST/WOOD !!!! built in 2003 23000h Ijdpfx Asvm N Dtsfijtn New pump with invoice 16200¤ New engine with invoice 17700¤ 16ton winch with RADIO Balloon tires Hiab wood tongs built in 2016 Tel: We do your financing or leasing Sale EU: net after presentation of company documents and tax/VAT number Sale outside EU: deposit 500¤ we speak English govorimo srpsko-hrvatski our service for you:* Export papers and EUR1 * Customs license plate Transport worldwide * Accommodation options Transfer Munich airport or Passau train station Tel:

Condition: excellent (used), Year of construction: 2001, Type: Horizontal / Vertical Serial number: 61937 / 61938 Year of construction: 2001 Diameter: 250 mm Pitch: 190 mm Infeed height: 1000 mm Ijdpfettzfcjx Afietn Outfeed height: 2150 mm Power: 3 x 400V, 50Hz, 15kW Dimensions: 3800 x 1200 x 3200 mm Screw conveyor with turnable outfeed shute

Condition: used, Quills, processing unit, automatic drilling machine, drilling machine, standing drill, multi-spindle drilling machine -2x: quill machining units -1x: Horizontal -1x: vertical -Max. Feed: stroke mm -Speed: rpm -Built-in drill chucks: 1.5-13 mm -Dimensions: 1050/1205/H1550 mm -Weight: 222 kg Iodpfx Afjchnx Uoijtn

Condition: used, Year of construction: 2003, operating hours: 23,000 h, Liebherr 924 !!! SPECIAL EXCAVATOR FOR FOREST/WOOD !!!! built in 2003 23000h New pump with invoice 16200¤ New engine with invoice 17700¤ 16ton winch with RADIO Balloon tires Hiab wood tongs built in 2016 Tel: We do your financing or leasing Sale EU: net after presentation of company documents and tax/VAT number Sale outside EU: deposit 500¤ we speak English govorimo srpsko-hrvatski our service for you:* Export papers and EUR1 * Customs license plate Transport worldwide * Accommodation options Transfer Munich airport or Passau train station Tel: Itjdpfsvm N Dgox Afien

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,510 h, functionality: fully functional, machine/vehicle number: 11670000823, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 180, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Itjdpfoxf Htxsx Afion Drive: Variable-speed asynchronous motor with liquid cooling Control: Sinumerik 840D powerline Work spindle Tool holder: HSK-A63, hydraulic-mechanical tool clamping Spindle speed: 0 – 10,000 rpm, continuously programmable Feed Drive: AC brake motors on the X, Y, Z, and B axes Feed range on the X, Y, and Z axes: 0 – 60,000 mm/min Rapid traverse on the X, Y, and Z axes: 80 m/min Measuring system Resolution on the X, Y, and Z axes: 0.001 mm Position tolerance on the X, Y, and Z-axis: 0.008 mm Pallet Number: 2 Size: 630 × 630 mm Hole pattern: 108 × bushing Ø 16.02 H6 Centering bushing: Ø 16.02 H6, 38.5 mm deep NC rotary table Max. tabletop rotation: 30 rpm Tabletop holding torque at 40% duty cycle: 5,000 Nm Tabletop holding torque at 100% duty cycle: 3,250 Nm Workpiece weight Per pallet: max. 800 kg Difference with different loads: max. 800 kg Tool magazine Type: Vertical chain magazine HSK-A63 Positions: 180 Tool changing system: Double gripper Max. tool diameter standard: 80 mm Max. tool diameter with free adjacent positions: 160 mm Max. Tool length from spindle nose: 550 mm Max. tool weight: 12 kg Max. magazine load: 630 kg MACHINE DETAILS Space requirement: 6.0 x 6.0 m Height: 3.2 m Weight: 18 t Power requirement: 71 kVA Machine dimensions: approx. 4.7 x 5.6 x 3.2 m EQUIPMENT - Internal coolant supply - Chip conveyor - Belt filter system - Cooling unit - Rotoclear - Tool breakage detection (laser) - Mist separator - Measuring probe - Handheld control unit - Flushing gun - Blow-air cooling system - 4-color signal lamp - Dynamic package

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,756 h, functionality: fully functional, machine/vehicle number: 16252, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: FANUC 30i, workpiece weight (max.): 250 kg, TECHNICAL DETAILS Travel X-axis travel: 500 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Work Table Pallet size: 300 x 300 mm Max. workpiece weight: 250 kg Rotary table: 360° x 0.001° Minimum/maximum spindle to table center distance: 120/620 mm Minimum/maximum spindle to table surface distance: 80/580 mm Max. workpiece size: 500 x 500 mm Spindle speeds: 50 - 15,000 rpm Itedpfx Afoxnwy Ieijn Spindle taper: ISO 40 Spindle drive power: 15/7.5 kW Feed rates X/Y/Z: 1 - 50,000 mm/min Rapid traverse: 50 m/min Rapid traverse B-axis: 33.3 rpm MACHINE DETAILS Control: FANUC 30i Total connected load: 38 kVA Weight: 10,000 kg Operating Hours Running time: 15,756 h Control on-time: 116,776 h

Condition: new, Year of construction: 2025, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. Itsdeq Nfuzspfx Afion 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance.

Condition: ready for operation (used), Year of construction: 2002, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH MULTI-PALLET SYSTEM X-AXIS TRAVEL: 1000 mm Y-AXIS TRAVEL: 850 mm Z-AXIS TRAVEL: 750 mm DISTANCE SPINDLE NOSE-TABLE: 50 - 900 mm RAPID FEEDS X-Y-Z: 30 m/min SPINDLE: 15000 rpm; 30 kW; ISO 50 - BT PALLET: INDEXING ; N.15 ; 630x630 mm HIGH PRESSURE COOLANT: 70 Bar Itjdpfx Afeq Drw Eoion TOOL MAGAZINE: CHAIN-TYPE ; 225 POS MAX TOOL DIAMETER: 120 mm MAX TOOL LENGHT: 500 mm MAX TOOL WEIGHT: 27 Kg CONTROL UNIT: FANUC 16i-M ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER ; TOUCH PROBE

Condition: ready for operation (used), Year of construction: 2008, operating hours: 15,289 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 121, TECHNICAL DETAILS Travel Paths X-axis travel: 750 mm Y-axis travel: 800 mm Z-axis travel: 850 mm Work Table (axis operated by AC servo motor) Pallet size: 550 x 550 mm Smallest indexing increment: 0.001 degrees Spindle Tool taper: #50 Drive power: 30/22 kW Spindle speed: 15,000 rpm Tool Magazine Tool stations: 121 tools Magazine type: Chain magazine Specification: BT-50 MACHINE DETAILS Control: FANUC 31i Installation dimensions (L × W × H): approx. 2,780 × 1,500 × 2,300 mm Operating Hours Running time: 15,289 h Control On-Time: 106,856 h EQUIPMENT Coolant system Renishaw infrared tool probe OMP 60 BT 50 Itjdpexnwq Hjfx Afion

Condition: ready for operation (used), No 2 - USED- 4-AXIS HORIZONTAL MACHINING CENTRES WITH MULTIPALLET SYSTEM X-AXIS TRAVEL: 1200 - 1460 mm Y-AXIS TRAVEL: 800 - 1000 mm Z-AXIS TRAVEL: 1200 - 1200 mm RAPID FEEDS X-Y-Z: 36 m/min SPINDLE: 25 - 6000 rpm; 900 - 1130 Nm; ISO 50 - DIN PALLET: N.18+N.12 ; 800X630 + 1000X800 mm; 15 rpm MAX ADMITTED LOAD: 1800 - 4500 Kg MAX MACHINABLE PIECE DIMENSIONS: 1250X1250X1400 - 1700X1350X1400 mm TOOL MAGAZINE: CHAIN-TYPE ; 300 POS MAX TOOL DIAMETER: 125 (250) mm MAX TOOL LENGHT: 650 mm MAX TOOL WEIGHT: 40 Kg CONTROL UNIT: SIEMENS 840 D OVERALL DIMENSIONS: 10000 x 6000 x 3800 mm ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; PAPER FILTER ; Ijdpfon Ny A Dex Afistn TOOL SETTER NOTE: LINEAR MULTI-PALLET SYSTEM LPP WITH No 30 PALLETS AND No 2 LOADING AND UNLOADIND STATIONS; 290 yom 2009, 2.500Kg; 230 yom 2008, 1.200Kg.

Condition: ready for operation (used), Year of construction: 2008, - USED - 5-AXIS HORIZONTAL MACHINING CENTRE WITH MULTI-PALLET SYSTEM X-AXIS TRAVEL: 2000 mm Y-AXIS TRAVEL: 1600 mm Z-AXIS TRAVEL: 1800 mm Itedpfx Afei En Azoien SPINDLE: 4000 rpm; 37 kW; 794 Nm; BIG PLUS ISO 50 PALLET: N.4 ; 1000X1000 mm MAX ADMITTED LOAD: 3000 Kg MAX MACHINABLE PIECE DIMENSIONS: ø 1550 mm HIGH PRESSURE COOLANT: 30 Bar TOOL MAGAZINE: CHAIN-TYPE ; 306 POS MAX TOOL WEIGHT: 35 Kg HEAD: AUTOMATIC 1° ROTARY HEAD CONTROL UNIT: SIEMENS 840 D ACCESSORIES: SWARF CONVEYOR ; LINEAR SCALES ; RENISHAW TOUCH PROBE

Condition: ready for operation (used), Year of construction: 1997, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 1500 mm Y-AXIS TRAVEL: 1200 mm Z-AXIS TRAVEL: 1250 mm Itjdpfx Afsh Hfrnjijn SPINDLE: 10-4000 rpm; 40 kW; HSK-A 100 PALLET: CONTINUOUS ; 1000X1000 mm; 1-500 rpm MAX ADMITTED LOAD: 2000 Kg TOOL MAGAZINE: CHAIN-TYPE ; 161 POS CONTROL UNIT: SIEMENS 840 C OVERALL DIMENSIONS: 8500 x 4800 x 4800 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER NOTE: COMPLETELY OVERHAULED MACHINE; HORIZONTAL AND VERTICAL AUTOMATIC HEAD; TURNING TABLE