Wood shredder

Robust Reuser HD1500/45kW

Condition: excellent (used), Fully automatic line for poles/stakes production, Infeed conveyor, step feeder, chain conveyor , 2 head rounding machine, separation unit, cross cut sizing saw, pointing/chamfering unit, also possible to make chamfer/chamfer or 2 poles same time pointing chamfer and chamfer/chamfer. max diameter 120 mm Nlsdpfx Afjtyv S Iorji

Condition: new, AVAILABLE EX STOCK ! Subject to prior sale. OD tube deburring machines clean and remove sharp edges on tubes and profiles caused by sawing. Enables simultaneous outside and inside burrs removal without rotating the tube. Nlodpjd Ixbzjfx Afrei Deburrs round, square, rectangular and many different tube and profile shapes deburring in few seconds.

Year of construction: 2024, condition: new, The flattest wooden frame construction table in the world = 3 cm! Delivery without wooden boards. Text line break with the following data: Included components: 1 double rail (zero stop) - 10 perforated rails - 10 rack and pinion clamps - 14 adjustable stop blocks - 14 interchangeable pressure plates outer wall - Battery impact screwdriver - Bit adapter - 50 MMS 10x70/5 dowel - Hammer drill 8x165 dimensions: Clamping length from 0 to 3.550 mm hole grid 140 mm with plate width 1.250 mm = table length 12.350 mm max. clamping force approx. 250 kg Nsdpfxsb Nrbns Afrjli stroke length clamp 340 mm height of stop blocks 100/160 mm The frame building aid was developed in order to precise production of timber frame elements. elements. Special attention was paid to the space requirements and the price. Due to the extremely flat it is now possible to change the surface by removing the the space by removing the clamps and stops. used in a different way. This is not only for small, but for all but for all company sizes a special advantage. After creating a flat surface, the tensioning rails are rails are aligned and anchored to the anchored to the floor. The intermediate spaces are covered with a 30 mm thick wooden panel to be mounted on site. filled. The same plate can be used to attach ramps to the edges. can be attached to the edges with the same plate. The level created in this way level can also be driven on with heavy vehicles vehicles, or can be used as a storage area. Thus the place can be activated only if necessary for the timber frame construction. be activated. The steel parts are galvanized. The entire assembly takes place on site. After adjusting the T [...]

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: SK-K-24001, Optimizing cross-cut saw line with scanner Manufacturer: Dimter Type: OptiCut 450 Year of manufacture: 2015 Item no.: SK-K-24001 DIMTER cross-cut saw line with 1 x OptiCut 450 and F 100 feeding system with LuxScan CombiScan+ C 200 and curvature measurement Nlodpfx Afewya Syorsi The line was in operation until 2024, has been professionally dismantled and can be viewed.

Condition: ready for operation (used), Pressing force 60s tons Dixi 60s baler, year 2006-2012 costs 4,000 EUR YEAR 2018-2020 costs 5,500 EUR Bale dimensions: 120 x 80 x 110 cm Press dimensions: 1900 x 1400 x 2200 mm (height) Press weight approx. 2,430 kg Bale weight up to 500 kg Oil heating Motor 7.5 kW Nodpfx Afera Nqhersli Brand new exhibition unit costs 11,000 EUR

Condition: used, machine/vehicle number: 12599, Rotor diameter: 600 mm Nodpek N Iy Nofx Afrsli Rotor width: 1450 mm 12-knife rotor 3 rows stator knives Inlet cross section approx. 780 x 1490 mm Drive motor: 132 kW

Condition: new, Year of construction: 2025, Fast adjustment of mitre, stepless from 30°-150°. With indication to accuracy on scale. The swivel is directly above the intersection of the saw blade and the fixed vice jaw so that there is a datum measuring point which does no change with the mitre angle. Positive stops at 30° + 45° left and right hand Nljdpfx Afsbi S Diorei Fast material clamping. Material is always clamped at 90° (parallel) regardless of angle to be cut. Stepless cutting pressure regulation through weight of the heavy and rigid saw frame and the fine tuning depending on cross-section by hydraulic damping cylinder Environmentally-friendly micro spray lubrication system Chip box inside Saw blade drive with end of cut stop Precise saw blade carbide-roller guidance Colour silver grey / blue grey (RAL 7001 / RAL 7031) 1 bandsaw blade 4/6 tpi Instruction manual and spare parts list on CD-ROM Additional standard equipment Hydraulic lift up of saw frame Model Manual Miter 30° left Ø 130mm; square 120x120mm 45° left Ø 200mm; square 180x180mm 90° Ø 260mm; square 300x260mm 45° right Ø 200mm; square 180x180mm 30° right Ø 130mm; square 120x120mm Motor:[kW] 1,8 Saw blade: [mm]3350x27x0,9 Speed: 35/75 m/min Working heigt:[mm] 900

Year of construction: 2024, condition: new, ♻ Universal use (various wood, pallets with nails, chipboard Nedpfon Nwxfsx Afrsli boards, waste and scrap, veneer, MDF boards, cardboard boxes, plastics, textiles, tires, etc.). ✔ Power: 55/75/90/110 kW ✔ Shaft length: 1400 mm ✔ Shaft diameter: 315 mm ✔ Shaft RPM: adjustable ✔ Number of cutting knives: 60 ✔ Granulation: 15-90 mm ✔ Capacity: up to 17 m3/h* ✔ Filling opening: 1400 x 1800 mm ✔ Dimensions L/W/H: 2,20/3,10/2,80 m ✔ Weight: 7000 kg 2 years warranty or 2000 working hours

Condition: new, Working width: 381 mm Working height: 150 mm Main engine 7,5 HP 3P Feed motor 1/4 hp Feed speed 6.2 m/min grinding belt dimension 405 x 1372 mm Machine size 1000 x 730 x 1680 mm Packing size 750 x 830 x 1900 mm N.W./G.W. 450/500 kg You can call or write us. We can speak and write German and Russian. You can also send messages in English. Nlodpfx Afok Rit Njroi 34.4.4.

Condition: reconditioned (used), Year of construction: 2020, operating hours: 3,300 h, functionality: fully functional, overall weight: 28,000 kg, total width: 2,500 mm, VZ 850 DK, Volvo Penta TAD16 L 770 HP, 3,300 operating hours - Conveyor belt as new, rollers replaced Nsdew S Iiijpfx Afrjli - Fine shredding shafts 12-9 as new - Counter-blade as new - Two hoppers - Long discharge conveyor - Magnetic belt - Track undercarriage guard - Cleanfix reversible fan