Used Homag Espana for sale (474)

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine HOMAG KAL370 AMBITION 2474, year 2015: Configuration: Entry fence servomotorical adjustable Premilling pneumatic adjustable Edge banding with preheating tank + AirTec System Material pressure zone servomotorical adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 4-motor pneumatic adjustable Radius R2 + multiradius scrapers servomotorical adjustable Glue scrapers servomotorical adjustable Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Entry magazine for two bands in rolls automatic Working thickness adjustment servomotorical driven Material height 8-60mm Lhsdpfx Abjxnb Uvj Usn Edge thickness 0,4-20mm Feeding speed up to 25m/min. Total length including feeding plate 8365mm Kilometerstatus 1.166.000 Meters edgebanded. Including full documentation and CE. Very good condition, fully working!

Condition: used, functionality: fully functional, machine/vehicle number: 2-017-95-2630, Motor spindle for CNC machine Weeke BOF and BAZ. Lhjdpexnbmfofx Ab Ujn - Available 7 pcs (in that quantity 2 pcs with C axis); - 12000 - 24000 Rpm; - 16kW - HSK 63

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0-200-73-1332, total length: 11,640 mm, type of input current: three-phase, input voltage: 400 V, working height: 950 mm, input frequency: 50 Hz, Equipment: CE marking, NEW PRICE ONLY €185,000!!! Price valid only until October 30, 2025! Don’t miss the opportunity! We invite you to purchase the HOMAG EDGETEQ S-500 edgebander, manufactured in 2021 and delivered to our site. The edgebander was operated for exactly 3 years—from April 2021 to April 2024—in single-shift operation. It has approximately 5,000 operating hours, which for a machine of this class is equivalent to the typical annual use in a professional production facility. The edgebander is in excellent condition and requires only cleaning and routine minor servicing. Single-sided edgebanders for narrow panels, such as the EDGETEQ S-500, provide precise edge banding and flawless edge finishing. Options for PUR adhesive application and airTec technology are available on request. Adjustable feed speeds of 16–20, 25, or 30 m/min allow performance to be matched to the needs of small, medium, or high-capacity production sites. Automation and additional functional upgrades for these models can be configured to individual requirements. The offered machine was purchased from HOMAG in 2021. Its condition can be described as perfect. In the industry, neither the model nor the HOMAG brand needs introduction—they are recognized globally as leaders in the manufacture of advanced, high-quality equipment. This model is highly professional and a perfect complement for any large or modern production facility. Our machine is comprehensively equipped and includes virtually all options. Currently, a new EDGETEQ S-500 with this specification costs €284,959 net (PLN 1,210,000 net). All manuals and technical documentation are included. We maintain support from HOMAG in case installation and commissioning are required for the new owner. In our opinion, the discount offered—over 30% off the new price, amounting to approximately €84,705 net (PLN 360,000 net)—more than covers transportation and commissioning costs through HOMAG, and still results in savings of over €70,000 net (approx. PLN 300,000 net), which could be invested in another production machine. Furthermore, there is no need for the 6-month lead time typical for a new machine: this edgebander can be in your facility less than a week after purchase. General notes regarding this sale: • Although the machine is almost new and was manufactured in 2021, no warranty or guarantee is provided. • No returns will be accepted. • The listed price is exclusive of VAT (23% for buyers in Poland) which will be added to the invoice—please check the ad for price details; Lhsdpow E Npfjfx Ab Uon • Single owner. General note: We are not a furniture, manufacturing, or machinery trading company. We own numerous properties in Poland and are a developer building houses and apartments in Warsaw. The machines listed in this offer are our property. We acquired them as settlements from tenants operating in the furniture industry. We know their histories and conditions, which are as described. We are in contact with the manufacturers for further support (HOMAG, OMC, and FANUM). Since we do not need these machines, our prices are very attractive, especially given that the machines are virtually new. We can assist with transportation anywhere in Poland or the EU. Inspections prior to purchase are welcomed.

Condition: good (used), CNC Machining Center HOMAG OPTIMAT BAZ 222/40/K with Edge Banding Unit and Loading Gantry Lhodpfx Ajxmvtqjb Uen Electronically controlled milling, edge banding, post-processing, and drilling center for the production of furniture parts, solid wood, or similar materials. Two independent Y-axes for the main spindle and edge banding unit Clamping table with 8 clamping consoles Y-1300 mm with hose-free vacuum guidance POWER CONTROL with PC85 controller Software: WoodWOP 5.0 Main spindle: 7.5 kW 12-position carousel tool changer Interface for automatic tool change of machining units with integrated pneumatic/electric/electronic supply and C-axis drive Drill head with 17 spindles Cross-cut saw unit 360-degree edge banding unit / for strip materials: rolls Edge thickness: max. 2 mm with veneer; max. 3 mm with plastic Chip removal conveyor Vacuum pump Busch MM 1322 A, 300/360m3/h (replaced in 2013)

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Equipment and technical data: Working dimensions Workpiece thickness: 8–60 mm Workpiece width: from 70 mm Edge height: up to 8 mm Edge thickness for roll material: up to 3 mm Feed Speed adjustable from 8 to 14 m/min, stepless regulation Gluing technology Glue system for granulate Glue pot located above the feed Interchangeable pot HOMAG QA 65 N Designed for EVA and PUR processing Quick-change function Units Jointing milling unit Pre-heating zone Pressure station, NC-controlled Front and end trimming with two motors Station for flush, radius, and bevel processing Corner rounding unit with two motors Scraper blades: profile and flat scraper Buffing unit Additional equipment and operator features Integrated spraying device Air cushion table for workpiece support PU pressure rollers Mechanical infeed barrier HOMAG powerTouch operator interface Right-hand machine version CE-compliant Dimensions: approx. 6,060 x 950 x 1,150 mm Lsdpsxizulsfx Ab Uohn Weight: approx. 2,200 kg Availability: approx. December 2025 Location: North Rhine-Westphalia (NRW)

Condition: used, machine/vehicle number: 008232, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Lhodpfxexf Dtpj Ab Ujn Premilling Unit: yes Max feed speed: 8 m/min Maximum panel thickness: 40 mm Operating Units: 5 nr

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine HOMAG KAL370 AMBITION 2280, year 2015: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding with preheating tank Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 4-motor manual adjustable Radius R2 scrapers pneumatic adjustable / Second set for R1 included Glue scrapers manual adjustable Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Ljdpfx Aexnbx Ieb Ujhn Working thickness adjustment manual driven Material height 8-60mm Edge thickness 0,4-20mm Feeding speed up to 20m/min. Total length including feeding plate 9365mm Kilometerstatus 2.926.000 Meters edgebanded. Including full documentation and CE. Very good condition, fully working!

Condition: ready for operation (used), working width: 2,600 mm, Double-end profiler Manufacturer: Homag Model: FLO 22 Workpiece width min. approx. 190 mm – 2600 mm Workpiece thickness: 8 – 90 mm Adjustable workpiece overhang: 10 – 120 mm Lsdpfx Aexl Udxeb Uohn Working height from floor: 905 mm Feed speed steplessly adjustable: 5–25 m/min Magnetic braking of the feed motor Electronic width adjustment, positioning in rapid/traverse mode, Adjustment speed max. 3 m/min Transport chain with cams, cam spacing: 900 mm, cam height adjustable up to 20 mm Infeed on the left machine side Equipped with 3 motors per side: Scorer: 1.5 kW, controlled, motor brake, 100 Hz, 6000 rpm, for tool diameter max. 180 mm Planer: 4.5 kW, motor brake, 100 Hz, 6000 rpm, 15° tiltable, for tool diameter max. 250 mm Milling motor: 4.5 kW, electro-pneumatic control for slot milling, motor brake, swiveling range 90 degrees, 100 Hz, 6000 rpm, reversing switch for rotation direction, extraction hood, tool diameter max. 200 mm Free space for the installation of a standard milling aggregate Complete with frequency inverter 30 kVA, 100 Hz, IP 54

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0-240-75-0703, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, NEW PRICE ONLY 105,000 EURO!!! Price valid only until October 30, 2025! Don’t miss the opportunity! We invite you to purchase a NEW, premium panel saw—HOMAG SAW-TEC B-400 Pro Line, extended version for automatic storage integration. The SAWTEQ B-400 is a panel saw from HOMAG equipped with automatic loading for high-speed cutting. This efficient saw is designed for handling large panel volumes and delivers superior-quality finish cuts. It is renowned for reliability, precision, high power, and rapid processing speed. The unit offered here is BRAND NEW. It was bought from HOMAG POLSKA Sp. z o.o. in 2020 and delivered directly to our facility by the manufacturer. The HOMAG POLSKA Sp. z o.o. service team performed only the initial startup; the machine has never been used since. In the woodworking machinery industry, both Homag and this model are benchmarks—Homag is a global leader in modern, top-quality equipment. Ljdpfew Exk Esx Ab Ujhn Our unit is exceptionally well-equipped, offering almost all available options. A similar saw in its standard version costs between 100,000–110,000 EURO net (425,000–467,500 PLN net)*, while our extended model, compatible with automatic storage and equipped with additional features, is valued at around 190,000 EURO net (807,500 PLN net)*. Advantages: - High throughput thanks to automatic loading and extended saw blade reach. - High productivity with relatively low space requirements. - Designed for efficient material flow and precise logistics. - Network-ready for digital production processes. We maintain direct contact and support from HOMAG for installation and commissioning at the buyer’s site if needed. In our view, the discount of over 45% off the new price represents an extremely competitive offer for anyone seeking a modern saw with or without future automatic storage needs—resulting in potential savings of about 90,000 EURO net (approx. 400,000 PLN net)*. The saw can be operated independently without connection to an automatic storage system. General details regarding this sales offer: - The machine is BRAND NEW, but was manufactured in 2020; therefore, no warranty or guarantee is provided. - Returns are not accepted. - The advertised price does not include VAT (23% for Polish buyers), which will be added to the invoice—please check our listed price presentation. - Single owner. * Price in EUR converted at the NBP rate—1 EUR = 4.25 PLN. Welcome to all MachineSeeker users. We are new to MACHINESEEKER. We are not a furniture manufacturer, machinery trader, or production company. We are a developer with extensive property holdings in Poland, constructing homes and apartments in Warsaw. The machines we offer are our property, acquired as settlements from tenants in the furniture industry. We know their full history and confirm their condition as described. We also maintain relations with machine manufacturers—Homag, Otto Martin, OMC Machinery, and FANUM—who can provide further support. As we do not require these machines, our pricing is extremely attractive, especially considering their almost-new state. We can assist with delivery anywhere in Poland or the EU. Prospective buyers are welcome to inspect equipment before purchase. Kind regards.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Single-sided laser and PU edge banding machine including workpiece return system Ligmatech Manufacturer: Homag Edge banding machine type: PROFI KAL 330/10/A6/L Return system type: ZHR05/L/115 Year of manufacture: 2013 - Laser activation unit Performance - PU65 application unit - Balti melting device - Feed rate 18-25 m/min - FK31/20-cycle Powertrim - FK31/F Feed rate: 15 – 25 m/min Workpiece thickness: 8 – 60 mm Minimum workpiece width: 60 mm Edge material (roll): 0.3 – 3 mm Edge material (strip): 0.4 – 20 mm Control: PC22 Control system: Powertouch Units and gluing Jointing cutter unit S2 Automatic horizontal adjustment for jointing cutter Automatic vertical adjustment for jointing cutter LaserTec activation unit Performance Basic gluing station A20, extension module Magazine extension for 6 rolls Freestanding horizontal roll plate Continuously adjustable edge pressure device Vacuum device for strip singulation Servo edge feed Edge thickness measurement for coiled material Quick-change system for application unit QA/PU PU65 application unit (interchangeable) Automatic glue dosage adjustment Balti melting device Automatic pressure zone adjustment Wetting system for pressure zone Release agent spraying unit top/bottom End trimming unit HL86 bevel/straight 0.22 kW servo Pneumatic adjustment for end trimming motor Automatic adjustment for end trimming stop Pre-milling unit BF20 Pneumatic adjustment for pre-milling unit Multi-milling unit MF21 servo Release agent spraying unit top Lodexgrfpjpfx Ab Ushn Profile trimming unit FK31/20-cycle Powertrim Profile trimming unit FK31/F Multi-scraper MN21 servo with chip breaker Finishing unit FA11 top/bottom, consisting of Glue joint scraper Cleaning agent application top/bottom Buffing unit Pneumatic adjustment FA11 Additional equipment Edge banding of solid wood edges Automatic adjustment of infeed fence Infeed extension 500 mm Sliding carriage Scissor-type workpiece support Scissor extension Workpiece thickness 8 mm instead of 12 mm Potential-free contact Flexible edge sequence control software Set-up-in-the-gap Workpiece return system ZHR 05/L/115 Manufacturer: Ligmatech Year of manufacture: 2013 Workpiece parameters Length: min. 300 – max. 2500 mm Width: min. 60 – max. 1100 mm Thickness: min. 8 – max. 60 mm Weight: max. 50 kg Feed rate: 8 – 30 m/min

Condition: good (used), Year of construction: 2024, Automation for HOMAG Drillteq V-310 - immediately available - 2024 For sale: automation, return system for workpieces. Lhjdpexl Ertjfx Ab Uon

Condition: used, machine/vehicle number: 008228, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Max feed speed: 8 m/min Maximum panel thickness: 40 mm Operating Units: 4 nr Lsdpfx Aboxfhvzj Uehn

Condition: used, Year of construction: 2009, Condition: Very good | *Machine description:* I am offering an industrial, single-sided edge banding machine from the renowned brand Homag, model Optimat KAL 210/6/A3/S2, year of manufacture 2009. The machine is fully operational, regularly serviced, and ready for immediate operation. *Technical parameters and equipment:* Year of manufacture: 2009 Model: KAL 210/6/A3/S2 Type: Single-sided edge banding machine for furniture panels Edging thickness: up to 3 mm Panel thickness: adjustable from 10 mm *Units:* - End trimming - Milling - Corner rounding - Scraping - Buffing/Polishing Control: Electronic / automatic Technical condition: Very good – all functions operate correctly *Additional information:* Lodoxlpa Ijpfx Ab Uehn - Machine in continuous operation - Regularly serviced - Ready for immediate use Inspection possible on site by prior arrangement. Location: Jasin / Wielkopolskie region

Condition: new, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 0-256-25-0756, total width: 1,850 mm, total height: 2,290 mm, total length: 2,390 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 4,000 kg, grinding height: 200 mm, working height: 200 mm, power: 33 kW (44.87 HP), grinding belt speed: 1,600 mm/s, conveyor belt speed: 1,500 mm/s, grinding belt length: 2,150 mm, workpiece height (max.): 200 mm, pass-through height: 200 mm, Homag SWT 225 CH OPTIMAT, wide belt sander, new, opportunity! Lhjdpexlgfzefx Ab Usn

Condition: excellent (used), HOMAG BOF 211 – CNC Machining Center with 4-Axis Technology Reliable CNC machining center featuring robust engineering, ideal for industrial use in furniture manufacturing and interior fit-out. ⸻ Technical Specifications • Machine type: CNC machining center • Axes: 4-axis technology (including C-axis) • Travel paths X/Y/Z: approx. 6,000 × 1,400 × 150 mm • Controller: HOMAG powerControl • Vertical main spindle: HKS • Tool changer: for multiple tools • Drilling heads: for vertical and horizontal operations • Aggregate interface: milling, drilling, grooving, sawing etc. • Vacuum clamping system: grid nesting or console table • Optional: edge banding and labelling ⸻ Special Features • Dimensional accuracy and repeat precision • Robust construction, well-maintained condition • Software support via HOMAG powerTouch / woodWOP • Suitable for furniture and interior construction ⸻ The machine is available immediately. Disassembly and transport can be arranged by our service team upon request. ⸻ Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus VAT, subject to change and errors excepted. Lhjdpfx Aoxk Tumsb Uon

Condition: excellent (used), Year of construction: 2020, HOMAG Centateq N-500 -BHP 100 / VANTAGE 710 #0-250-71-6275 -Year of manufacture: 2020 Ljdpfxjxfkdzj Ab Ushn -Table size: 3100 x 2250 mm -Stop system: front right, front left, rear -2x vacuum system 580/690 m3/h -Tool spindle 10 kW, air-cooled -Aggregate interface for main spindle, C-axis -Tool changer magazine, rear, fixed -Milling unit with feeler ring

Condition: excellent (used), Year of construction: 2009, HOMAG OPTIMAT BMG 511 /60/12/F/K - CNC processing centre in moving gantry construction for trimming and drilling of wood or MDF panels Thanks to 5-axis technology, all machining operations are possible without the use of additional angle agregates. The free design of all possible shapes of stairs, doors, and windows is possible, and their production is fully automated. Thanks to 5-axis centers, production times are drastically reduced. This CNC is equipped with a new type of 5-axis electrospindle from the top producer OMLAT, which operates using cardan joint. This electrospindle is liquid-cooled, enabling continuous operation without downtime. The machine bed is made of SORB TECH material patented by Homag instead of steel in the machine frame, the vibration-damping capacity is 80 percent higher than that of steel castings. It is stress-free and has a high vibration damping coefficient, which improves machining quality and extends tool life. The HOMAG BMG 500 series machining center is characterized by high-quality, which is due to the components that influence processing quality and durability. The machine features a gantry design and a dual drive system, meaning the gantry moves on two independent linear bearings powred by two engines. This eliminates stress and ensures high precision and stability during processing, while also reducing vibrations unlike standard machining centers. The machine is ideal for precision machining in industrial environments at high speed and without downtime, where standard CNC machines fails. CNC WORKING CENTER (POINT TO POINT) 5 AXIS (DRIVE 5C +) Ledetg Nquopfx Ab Uehn Prepared for 1 main spindle, mounted on the right side of the gantry beam. Numerical Control PC85 Software WoodWOP Safety cabin (enclosure) of the working head Working table with pods and rails Mod. K-Table Support rails (No.) 10 Table dimensions 1250 mm Clamps for workpieces fixing Pneumatic Kit powerClamp - clamping element - K Table Automatic Tools Changing System Tools storage plate (No. of folds-positions) 14 Max. useful working area (X-Y-Z) mm 6175 x 1550 x 300 No 2 Working areas Vacuum pump capacity m3/h 2 x 100 Separate electric and command cabinet Motorized carpet to evacuate chips and wastes. Total installed power (50 A) WORKING GROUPS (TOP) No 9 Independent vertical boring spindles (High Speed 7500) No 4 Independent horizontal boring spindles (No. 2 in Xaxe + No. 2 in Y-axe) Drilling head motor-power 1,5 Kw No 1 Vertical electro-spindles HSKF63 DRIVE 5C +. Vertical electrospindles motor power (KW 10)

Condition: used, machine/vehicle number: 007877, Max. panel width: 1100 mm Lsdpfswkf Hqex Ab Ujhn Max. panel length: 2500 mm Panel return for edgebander: Left

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0-201-15-4101, travel distance X-axis: 535 mm, travel distance Y-axis: 535 mm, travel distance Z-axis: 535 mm, spindle speed (max.): 24,000 rpm, tool diameter: 280 mm, Equipment: chip conveyor, 5-Axis Machining Center with Chip Conveyor! Bidding obligates the buyer to collect the item by 14.10.2025 at the latest! TECHNICAL DETAILS Travel paths Travel range X-axis: 535 mm Travel range Y-axis: 535 mm Travel range Z-axis: 535 mm Feed speed X/Y direction: up to 60 m/min Feed speed Z direction: 30 m/min Spindle Head Spindle power: 12 kW Spindle speed: 1,500 - 24,000 rpm C-axis swivel range: -220 - +220 ° A-axis swivel range: ° Coolant temperature: 15 - 45 °C Tool Magazine Tool holder: HSK-F63 Interface: HOMAG Interface 9-002-04-3360 Number of tool positions: 18 Pitch circle diameter: 760 mm Max. total toolholder weight: 90 kg Max. weight per tool: 10 kg Tool diameter: 280 mm Max. tool height: 320 mm Clamping Cylinder Lower clamping plates: 70 × 90 mm Upper clamping plates: 77 × 100 mm Piston rod diameter: 25 mm Clamping height above console: 100 mm Lift – support cylinder: 55 mm Clamping force: 1,300 N Max. workpiece height: 80 mm Return: manual Drilling Unit with Slotting Tool Drill tool speed: max. 6,000 rpm C-axis swivel range: ± 360° Tool holder for drill tool (rotating): Ø 11.55 mm Tool holder for slotting tool (fixed): Ø 18.95 mm Weight (mounted): 3.5 kg Lhedsxhgpfspfx Ab Uen Chip Conveyor Discharge height with incline conveyor: 1.3 m Discharge height without incline conveyor: 0.3 m Max. scrap piece size: 300 × 300 mm EQUIPMENT Chip conveyor Eagle Eye laser projector 40 tools Numerous additional accessories

Condition: good (used), Year of construction: 2007, Used edge banding machine - Model KAL 310 - Year of manufacture 2007 - Including return conveyor - In good and fully operational condition - Photos & video available Lhsdpfx Aboxhc Sie Usn

Condition: excellent (used), Year of construction: 2010, operating hours: 2,560 h, functionality: fully functional, total length: 5,760 mm, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, height adjustment type: electric, plate height: 60 mm, Brandt 1650 Highflex with return conveyor and PU glue box, top condition Year of manufacture: 2010 Operating hours: 2,560 h Total edge length: 211,844 m Lhodjvnwf Uepfx Ab Ujn Edgebanding thickness max: 12 mm Panel thickness max: 60 mm Coiled material thickness max: 3 mm Minimum workpiece width: 70 mm Feed speed max: 18 m/min Infinitely variable feed speed Motorized height adjustment Granulate glue system Premelting tank BRANDT QUICKMELT KD glue system 2 x PU glue tanks Strip magazine Joint milling aggregate End trimming unit with 2 motors Flush/radius/chamfer stations: 1 Corner copying unit with 2 motors Scraper unit Profile scraper, flat scraper Buffing station Aggregates synchronized NC axis/axes Design: right-hand machine Machine length: 5,760 mm Conformity marking: CE mark Ligmatech Boomerang return system PU glue box The machine is still in operation; inspection encouraged; available by arrangement No warranty Collection only, forklift available Net price plus VAT Price negotiable

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available Lhodpfxjxg Ix Sj Ab Ujn MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: used, machine/vehicle number: 008016, X axis working area: 3300 mm Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 10 KW Number of controlled axes: 5 axes Total number of drilling spindles: 35 Total number of tool changer positions: 14 Ledpew Idhmsfx Ab Uehn

Condition: used, machine/vehicle number: 005939, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1500 mm Max feed speed: 40 m/min Operating Units Right Side: 11 nr Operating Units Left Side: 11 nr Ledpfx Abowcyaij Uohn

Condition: used, machine/vehicle number: 006252, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Lhedpfewcyckjx Ab Uen Max feed speed: 40 m/min Maximum panel thickness: 60 mm Operating Units: 10 nr