Used Holzher Sprint 1417 for sale (146)

Condition: used, Holz Her UNO 1303 + PU Edge thickness 0.4 -3 mm (6 mm) Control panel with selector switches for setting the units Fully automatic edge magazine for rolls and strips Adhesive application station: cartridges + PU gluing Codpfsxlz Nzex Ab Tjrk Workpiece height 6-55 mm Pneumatic pressure unit Cutting unit for rolls and strips up to 3 mm (6 mm) edge thickness with adjustment of 0-10° angle of the cutting saws Milling unit, flush milling, radius milling, bevel milling - 15° Scraping unit for bevels and radii Surface scraping unit - finish Machine is CHECKED in TOP CONDITION from a very well-maintained craft business from the Lieboch warehouse

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 226/0-206, Max. cutting length 4,300 mm, Max. cutting height (vertical) 2,100 mm, Max. cutting height (horizontal) 2,010 mm, Max. cutting depth 60 mm Motor 4 kW Max. circular saw blade diameter = 250 mm, Cjdpswgm Ihsfx Ab Tork Extraction nozzle diameter = 120 + 100 mm Max. installation dimensions 5,080 x 2,780 x 1,600 mm, Support rails have been replaced! --- Excluding transport and assembly of the machine --- Ex works in Seevetal, as seen, Subject to prior sale

Condition: used, Year of construction: 2019, Used machine Year of construction: 2019 Equipment and technical data: - Designed for classic nesting processing with wear plate - Machine frame in welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry design traveling column - Helical rack and pinion drive in X and Y directions; ball screw drive in Z direction for precise positioning - Processing dimensions: - Max. support area on nesting table: X = 3100 mm Y = 1560 mm - Max. traverse paths: X = 4695 mm Y = 2100 mm Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed: Vector speed: 128 m/min X = 80 m/min Y = 100 m/min Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y direction - Groove spacing: 50 mm - Includes 25 meters sealing cord for clamping the wear plate - Vacuum zones: single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shaped arrangement - 5+4 in X and 4 in Y direction - 32 mm grid Crsdowkbbdspfx Ab Tsk - Max. drill diameter: 35 mm - Total drill length: 70 mm from mounting end (depends on panel thickness) - Spindle stroke: 70 mm - Rotation direction: clockwise/counter-clockwise alternately - n(max): 1000 - 4400 rpm infinitely variable - Holder: M10 thread – 11 mm fit - Without tools and holders - 6 horizontal spindles: - 2 double drilling spindles in X direction - 1 double drilling spindle in Y direction - Holder: M10 thread, 11 mm fit - Max. total drill length: 63 mm from mounting end - Without tools and holders - Milling unit 7842: - Power: 12.0 kW (S6) - n(max) = 1000 - 24000 rpm infinitely variable - Max. power at 12000 to 24000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck with HSK shank - Ceramic ball bearings (hybrid bearings) - Max. tool weight: 6 kg (including holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety guard according to CE standard - Safety fencing at sides and rear - Vacuum pump: 500 m³/h, dry-running - Personnel safety via light barriers in the front machine area - Handheld control unit for remote operation with the following functions: - Start/Stop machining program - Speed control for machining cycles - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license comprising: - CAMPUS NC-HOPS: - Graphic variant system with dialog programming and CAD/CAM functions for creating part variants with macro technique - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional dust protection by overpressure in each guide carriage - Simultaneous lubrication for all linear ... (text evidently continues)

Condition: ready for operation (used), Year of construction: 2007, Brand: Holz Her Model: PRO-MASTER 7123K Serial no: 527/0-705 5010147 Year of manufacture: 2007 - 2 HSK cones included + various drills for drill box - Comes with a number of suction cups and some spare parts Tech. info: 4-axis (c-axis) 6 beams Motor-controlled adjustment of beams Number of vertical boring bits: 24 Number of vertical boring bits in X axis: 10 Number of vertical boring bits in Y axis: 8 Centres distance: 32 mm Horizontal double spindle in X axis: 2 Horizontal double spindle in Y axis: 1 Centres distance: 64 mm Working area: 3200x1260 mm Maximum travel path: X= 3866 mm Y= 1650 mm Z= 325 mm Workpeice pass height for tool change spindle with HSK 63F tool connection: 345 mm Max. machining thickness/ feed-in height (rear stop): 175 mm Max. workpiece size for vertical bores: X=3730R/ 3460L mm Y=1570 mm Max. workpiece size for horizontal bores X: X=3450R/ 3370L mm Y= 1315 mm Max. workpiece size for horizontal bores Y: X=4760R/ 3300L mm Y= 1385 mm Max. workpiece size for edge milling, less cutter radius (tool 25 mmdiameter x 125 mm, HSK): X=3510R/ 3525L mm Y=1445 mm Z=280 mm Max. workpiece size for grooving in X (dim. centre grooving tool approx. 120 mm): X=3300R/ 3760L mm Y=1585 mm Max. workpiece size for grooving in Y (dim. centre grooving tool approx. 120 mm): X=3200R/3860L mm Y=1485 mm Max. travel speed X axis: 100 m/min Max. travel speed Y axis: 100 m/min Max. travel speed Z axis: 25 m/min Max. travel speed C axis: 60 m/min Motor power of boring unit: 3 kW Motor power of saw: 1,5 kW Motor power of electro spindle unit with clamping system: 6 kW Speed electro spindle 1000-18000rpm Power: 22 kW, 50 Hz, 400 V, 3-phase Compressed air: operating pressure 6,0 bar permissible limit pressure 8,0 bar Air requirement: 300 l/min Extraction capacity: approx. 5300 m3/h Dust nozzle diameter: 250 mm Size: Length with control cabinet: 6420 mm Overall width: 3760 mm Crodpfxjrz Irrs Ab Tek Height with extractor hood: 2475 mm Weight: 4200 kg Program Campus NC-HOPS Operating system Microsoft Windows Graphic variants system with HOP and CAD/CAM properties For the creation of parts variants with macro technology Program operation Windows-conform surface configuration and operator guidance Macro / variant programming Indication and simulation modes Export and import facility to the various branch programs Interaction possibilities with a variety of branch programs Stock no: 2002061BXA with reservation for incorrectly presented technical data

Condition: excellent (used), Year of construction: 2012, operating hours: 500 h, functionality: fully functional, Holzher Uno 1302 , Year 2012 , Flat scrapers , Crodpfxjxz Icge Ab Tok Fully functional , Can be tested ,

Condition: used, Year of construction: 1994, Edge thickness 0.3 - 20 mm, edgeband height: max. 66 mm, edgeband length: min. 200 mm, workpiece width min. 60 mm, workpiece length min. 140 mm, workpiece thickness: min. 6 mm, max. 60 mm, feed speed 8 or 16 m/min - Edgebanding with Ultra - Granupress - End trimming with 2 saws, 0 - 15° tiltable - Milling, radius / flush - Corner copying - Scraper - Pneumatic buffing Location: Nattheim Cedpovvkdtofx Ab Tsrk

Condition: used, Year of construction: 1992, functionality: fully functional, saw blade diameter: 300 mm, cutting length (max.): 5,300 mm, cutting height (max.): 2,200 mm, cutting depth: 80 mm, Holz-Her Panel Saw 1211 Year of manufacture: 1992 Fully operational - Automatic retractable support grid - 6 fixed cutting positions - Lowerable support rollers / wood - 4 kW motor Crsdpfx Asxz Dxwob Tjk Installation dimensions (LxHxW): 6.60m x 2.77m x 1.24m Item location: Leipzig The machine can be inspected at any time. However, it must be collected in December 2025.

Condition: excellent (used), Holz-Her power feeder, 3 rollers with stand (rollers are NEW), 8 speeds, in very good condition. Crsdpfswktalox Ab Tok

Condition: new, Year of construction: 2024, New machine Cedpexymd Tjfx Ab Tork Year of manufacture: 2024 (arrived in 2025) MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Technical specifications: Edge thickness for rolls: 0.4 - 3 mm (depending on material) Edge thickness for strips: 0.4 - 8 mm (depending on material) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm (Restrictions may apply to individual units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner rounding) Workpiece length: 180 mm Feed speed: 10 m/min Equipment: Motorized pressure bridge adjustment Extendable workpiece support XL, 600 mm spacing 3-color LED light in the infeed Motorized adjustment of the infeed guide Long infeed guide 1252 mm I-Tronic package Edge Control PPC 322 W IntelliSet: intelligent Tool correction f.a.s.t = fast setting technology ECO mode Energy saving mode Prepared for RETURN connection (third-party manufacturer) BS 501 guide system; right-angled workpiece feeding for front edge banding of narrow parts - Workpiece thickness: min. 10 mm - Workpiece thickness: min. 60 mm - Workpiece length: approx. 140 - 450 mm FG201 jointing unit with 2 64 mm high milling heads MG 301 edge feeder GluJet GJ 725 NC PUR PRO adhesive application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° pivoting for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reactant (water molecules) from the PUR, allowing the PUR adhesive to remain in the system without curing. The vacuum pump operates independently of the machine's power supply and automatically compensates for any vacuum loss. - PUR fully under control! DW 301 printing unit with motorized NC axis; 1st roller driven by pneumatic plunge control, 2 conical pressure rollers GM301 spray unit after printing unit with lubricant for high-gloss edges KA 501 pneumatic trimming unit (60 mm) Extraction hoods for trimming unit FR301 MOT6 multifunctional trimming unit Shelf program FF 301 MOT1 profile trimming unit ZK301 MOT4 scraper unit including high-gloss package FK702 surface scraper Complete spray unit for separating and cleaning agent GM 301 spray unit after printing unit (high-gloss edges) SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: Short-term Storage location: Hochheim

Condition: excellent (used), Edge bander Holzher Streamer 1057 Pre-milling units Glue application, GLUE JET cartridge glue system Suitable for PUR glue Equipped with glue discharge Pneumatic pre-cut guillotine Pressure rollers Final trimming saws, angle adjustable Crsdjxf H Rdjpfx Ab Tek Top and bottom milling units R1, R2 Corner rounding unit Profile scraper Flat scraper Max edge banding height: 45 mm Max edge thickness in roll: 3 mm Machine length: 460 cm Feed speed: 10 m/min

Condition: excellent (used), Horizontal milling machine Spindle diameter: 40 mm Spindle length: 220 mm Credpfxew N Ryro Ab Tjk Maximum spindle diameter: 250 mm

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Crodpfx Aevvkfdeb Tsk

Condition: not inspected (used), Used machine Crjdpoxviuasfx Ab Tsk Used vertical panel saw by Holz-Her, type 1210 Older model; suitable only for coarse cutting Technical data: Cutting length approx. 5300 mm Cutting height approx. 2200 mm Cutting depth approx. 80 mm Maximum saw blade diameter 300 mm Motor power 4 kW Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Holz Her STREAMER 1054 FÜ + PU Edge thickness 0.4 - 6 mm Modern control with selector switch for adjusting the units Pre-milling unit for attaching before the gluing part Fully automatic edge magazine for rolls and strips Glue application station GLU-JET cartridges + PU gluing Glue application using nozzle technology Workpiece height 6-60 mm Automatic glue height adjustment Codpfxjxu E Nwo Ab Tsrk High-quality 3-roller printing unit, 1st roller motorized Cutting unit pneumatic. for rolls and strips up to 6 mm edge thickness with pneumatic adjustment of 0-10° bevel of the mitre saws pneumatic milling unit, flush milling 6 mm, radius milling - chamfer milling - 15°, pneumatic via control panel scraper unit for chamfers and radii with 2 scraper holders pneumatic engagement and disengagement surface scraper unit - finish spraying device - PU machine is WORKSHOP REFURBISHED in TOP CONDITION

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical data: Cutting length 5300 mm Cutting height 2200 mm Max. workpiece thickness 80 mm Motor 5.5 kW Compressed air connection 6 bar, 50 NL/min Codpfexymd Hsx Ab Tsrk Extraction connection 2 x 100 mm, 1200 m³/h Pneumatic unit lock Pneumatic immersion of the unit Digital horizontal display Availability: by arrangement Location: Hochheim

Condition: ready for operation (used), IM Very good condition. Codpfx Abjvunm As Terk

Condition: used, Storage location: Nattheim Cjdpfxevvkrdo Ab Terk

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: Well-maintained (ready for demonstration at customer site) Equipment and technical specifications: Console machine Working size X: 3,200 mm Working size Y: 1,470 mm Max. travel height Z: 325 mm Milling unit 7939, 6 kW (S6) Including laser pointer Including traveling disc tool changer 7996 with 18 positions Including stationary tool changer on the right side Including 7893 magazine for manual tool change position 8 consoles including 12 vacuum suction cups for 4-field machining 4 pneumatically raisable and lowerable loading aids Including hand control unit Including 3-field safety tread mats Including saw unit for sawing/grooving in X Including C axis 7997 Horizontal drilling units: 6 Codoxymfkopfx Ab Tork Vertical drilling units: 16 Double drilling spindle in X Heat exchanger for control cabinet cooling CAMPUS software for CNC machining centers Vacuum pump 100 m³/h Weight: approx. 4,450 kg The tools shown in the tool changer are not included in the scope of delivery! Availability: by arrangement Location: Rhineland-Palatinate

Condition: used, Year of construction: 2011, Weight: approx. 4500 kg Storage location: Nattheim Csdpfxjvvi R Ee Ab Terk

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and Technical Data: - For classic nesting processing with wear plate - Machine frame of welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry-type traveling column - Helical rack and pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Max. support area on nesting table: X = 3100 mm, Y = 1560 mm - Max. traverse paths: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drilling unit 7877: Cjdpfx Aswka Upjb Tjrk - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - Arranged in U-shape - 5+4 in X direction, 4 in Y direction - 32 mm spacing - Max. drill diameter: 35 mm - Total drill length: 70 mm from screw-on end (depending on panel thickness) - Spindle stroke: 70 mm - Rotational direction: alternating clockwise/counterclockwise - Speed (max): 1000 - 4400 rpm, infinitely variable - Tool holder: M10 thread, 11 mm fit - Without tool, without holder - 6 horizontal spindles: - 2 double drill spindles in X direction - 1 double drill spindle in Y direction - Tool holder: M10 thread, 11 mm fit - Max. total drill length: 63 mm from screw-on end - Without tool, without holder - Milling unit 7842: - Power: 12.0 kW (S6) - Max. speed = 1000 - 24,000 rpm, infinitely variable - Max. power at 12,000 to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck for HSK shank - Ceramic ball bearings (hybrid bearings) - Tool weight max. 6 kg (incl. holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety enclosure according to CE standard - Side and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Personnel safety ensured by light barriers in the front machine area - Hand-held control device for remote operation of the machine with the following functions: - Start/stop of the processing program - Control of processing cycle speed - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional sealing against dust via pressurization in each guide carriage

Condition: used, Year of construction: 2006, EVA glueing, 2 pressure rollers, cross-cutting station, pre-milling cutter and rounding cutter, surface scraper, transport device Storage location: Nattheim Credpfx Abevvkg Io Tok

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Condition: Machine completely overhauled and serviced Equipment and technical specifications: Credjwka N Topfx Ab Tsk Infinitely variable feed speed: 10–18 m/min Edge Control 19 control system with 18.5" touchscreen color display Jointing milling unit Edge feeding Cartridge adhesive application station with sensing nozzle and automatic glue height adjustment Pressure unit End trimming unit Multifunctional milling unit Corner copying unit Radius scraper unit Surface scraper Buffing unit Workpiece thickness: 6–60 mm Edge thickness: 0.4–8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: short notice

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Crodpfx Aevvi Speb Tsk Storage location: Nattheim

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Condition: Function tested Equipment and technical data: Milling unit: 4.4 kW Tool holder: HSK 63 F Speed: 1,000 - 18,000 rpm Water-cooled Csdpow I Ug Hsfx Ab Terk Tool changer: 4-position, lateral Drilling head: 9 vertical drilling spindles on a 32 mm pitch Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X-direction Control: Twin CAM 32 Vacuum pump: 40 cbm/h Including vacuum suction cups Travel paths: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Weight: approx. 3,500 kg The machine is completely checked for all mechanical, electrical, and electronic components and overhauled where necessary. All guides checked; console guides replaced New PC control system for the TWIN CAM control All axis modules checked and serviced Location: Flörsheim Availability: by arrangement

Year of construction: 2015, condition: used, Used machine Year of manufacture: 2015 Special feature: was a demonstration unit from Holz-Her and only went into production operation with the machine in 2019 Equipment and technical data: - 30% to 50% space savings - Minimum gap between stacks (from 70 mm) = optimal space utilization - Panel damage excluded, panel separation control with weight measurement - Fully automatic operation (inbound/outbound storage) as well as automatic loading of the machine - Adaptable for all panel formats (1.2 to 5.6 m) depending on options - 90° rotation of panels - Low overall height of the manipulator - External dimensions: - Length: 8.5 m - Width: 7.5 m - Minimum panel size: 1.2 x 0.6 m - Maximum panel size: 3.2 x 2.1 m Codpfjwkbagsx Ab Terk - Maximum lifting weight: 150 kg - Stack height 1.8 m up to max. 2.0 m - Maximum lifting height: 2.1 m - Travel speed: - Horizontal approx. 120 m/min - Vertical approx. 45 m/min - Manipulator suitable for slightly air-permeable, smooth materials such as coated chipboard, blockboard, raw MDF, raw HDF, raw chipboard (good quality) - Upgrade: Vacuum capacity for suction units on the manipulator 100 m³/h for a material mix in the warehouse such as MDF and raw chipboard - Connected load 6 kW - Portal bridge with vibration dampening, manipulator head with lifting device as well as gripper arm made of steel, space-saving due to low design height Articulated arm design with direct drive via steel band thus wear-free and vibration-resistant - Electronic panel position measurement - Panel rotation correction: The panels are measured with sensors and stacked accurately - Separation system for thin panels via integrated weight measurement - Inbound and outbound storage position - Direct loading onto the machine - Warehouse management software Previous list price: €110,000.00 Availability: short-term Stock location: Flörsheim