Used Holzher Sprint 1417 for sale (163)

Condition: good (used), Year of construction: 2003, functionality: fully functional, power: 5.5 kW (7.48 HP), Max. cutting length: 5300 mm Max. edging height: 2100 mm Max. cutting depth: 80 mm Kodpfxeyucmho Ahvodi Digital display for horizontal and vertical cuts Saw unit: 5.5 kW Saw blade diameter: 300 mm Unit pneumatically tiltable Dimensions (LxHxW): 6620 x 2948 x 1480 mm

Condition: excellent (used), functionality: fully functional, Edge banding milling machine with Holz Her 3-roller feed unit, 30 mm spindle, 50 mm milling width. Machine dimensions: 1000 x 1000 x 1300 mm, weight: 250 kg, in good condition, fully functional. Shipping available at additional cost. Kodsvkgdrjpfx Ahvjdi

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Kjdpfjyq T Insx Ahvedi Condition: unchecked Equipment and technical data: - Edgebanding thickness: 0.3-5 mm - Workpiece thickness: 6-45 mm - Minimum workpiece width: 60 mm - Minimum edge length: 200 mm - Feed rate: 11 m/min - Electrical connected load: 3.4 kW - Extraction port: 100 mm - Air requirement: 550 m³/h - Glue system: cartridge 1906 - Trim saws, front and rear: 1975 - Radius milling unit, top and bottom: 1942M - Radius scraper, top and bottom: 1929 - Buffing unit: 1941 K - Machine length: 3675 mm - Machine width: 1470 mm - Machine height: 1200 mm Weight: 950 kg Availability: short-term Location: 63934 Röllbach

Condition: excellent (used), functionality: fully functional, saw drive: 3,000 W, Holz-her 1220 automatic vertical panel saw. Kjdpfx Ahox Eyqyevedi Multiple settings, half or whole board cutting. You can try it, it works well.

Condition: good (used), Year of construction: 1997, functionality: fully functional, - PVC Primus, 3 mm PVC cartridge system - Gluing, flush trimming, flush milling, chamfer milling, radius milling - Scraper blade, buffing unit Kdodpewv Uq Aefx Ahvsi - Dimensions: 4700 x 1400 x 1650 mm - Weight: 1300 kg - Working dimensions: Length: 4500 mm Depth: 1020 mm Height: 1630 mm - Connection nozzle: 140 mm Ø - Workpiece width: min. 60 mm - Feed rate: 11 m/min - 6 bar - 400 Volt compressed air - Edge thickness: 8 mm for strip material, 2 mm for roll material - WITHOUT pre-milling unit - New pneumatic cylinder Shipping possible at additional cost

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 252 / 0 - 701, functionality: fully functional, Availability: Immediate - End of March Year of manufacture: 2007 Working area: 3866 x 1260 mm Max. traverse path: X = 3268 mm, Y = 1650 mm, Z = 325 mm Workpiece passage height: 345 mm Max. machining thickness: 175 mm Max. workpiece size for edge routing: 3510 x 1445 x 280 mm Kdodpfx Ajyt Ehljhvji Max. traverse speed X-axis/Y-axis: 100 m/min Max. traverse speed Z-axis: 25 m/min Drilling unit motor power: 3 kW Saw unit motor power: 1.5 kW Milling spindle motor power: 9 kW Milling spindle speed: 1000 - 24000 rpm Vacuum pump: 140 m³/h 6 consoles Tool changer: 14 positions Front and rear stop row Crosshair laser for vacuum cup positioning

Condition: ready for operation (used), Holzher PK 1220 automatic Super Cut - automatic feed with 2 speeds (selectable over the full or half length, with or without automatic return) - strip stop - still under power, inspection possible Kdjdpfeyatdhjx Ahvoi Cutting width: 5300 mm Edging height: 2100 mm Passage height: 2200 mm Cutting depth: 80 mm Saw unit tiltable: 90° Motor power: 4.6 kW Saw blade: 300 mm Weight: approx. 1000 kg Required room height: 2895 mm Length: 6555 mm Ex location Dismantling and loading available at extra charge

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, input voltage: 380 V, workpiece height (max.): 60 mm, edge thickness (max.): 8 mm, actuation type: electric, total height: 1,774 mm, total length: 4,580 mm, overall weight: 1,450 kg, Equipment: CE marking, documentation/manual, Workpiece thickness for edgebanding: between 8 and 60 mm, Edge thickness up to 8 mm depending on the unit Configuration: -calibrating, -edge feeding, -glue application, -end trimming, -milling group; flat or profile milling of upper or lower edges, -profile milling unit, -scraping group, -polishing station Pressure beam, feed stop, control panel Year: 2017 Ksdpfxoytp Hro Ahvodi

Condition: used, Year of construction: 1990, Used machine Kdjdpfoyncpvsx Ahvji Year of manufacture: 1990 Equipment and technical data: - Automatic edge feeding - Cartridge glue system - Pressure unit with 4 rollers - Cross-cut saw unit - Flush trimming unit - Combination trimming unit (flush/chamfer/radius) - Radius scraper - Buffing unit - Edgeband thickness: 0.3 - 20 mm - Maximum edgeband height: 66 mm - Minimum edgeband length: 200 mm - Feed speed: 8/16 or 12/24 m/min Availability: short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Condition: Function tested Equipment and technical data: Max. edge thickness: 20 mm Max. edge height: 51 mm Max. thickness of coil material: 3 mm Min. workpiece length: 140 mm Min. workpiece width: 60 mm Glue system: 1906 cartridge Pressure unit Milling unit 1920 for flush milling up to 20 mm and chamfer milling Required space (LxWxH): 3150x1800x1375 mm Kdsdpfxsw I U E Ae Ahvsi Weight approx.: 800 kg Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Machine is completely workshop overhauled! Automatic horizontal and vertical positioning for absolute and incremental dimensions Digital readout for horizontal cuts PLC control with a 2-line display and plain-text error diagnosis for operation mode and fault diagnosis Infinitely variable feed speed up to 24 m/min Automatic workpiece end detection Calculator function integrated in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm Max. trimming height: 2100 mm Max. scoring height, vertical: 2100 mm Max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4,500 rpm Saw blade diameter: 300 mm Air requirement: 1,200 m³/h Air velocity: 20 m/s Static negative pressure: 1,200 Pa Extraction connection: 2 x 120 mm Kdjdpfx Ahow Nac Aovji Dimensions (L x W x H): 5,620 (plus extraction nozzle) x 1,480 x 2,948 mm Room height: 2,990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connection load: 5.7 kW With Supercut pre-scoring unit With pneumatically swiveling saw unit With longitudinal stop for lower workpiece support With short folding rail, complete Availability: by arrangement Location: Flörsheim

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, operating hours: 500 h, Holzher Uno 1302 , Year 2012 , Flat scrapers , Fully functional , Kdedpfoxz Icgjx Ahvei Can be tested ,

Condition: ready for operation (used), Year of construction: 2016, Numerically adjustable infeed fence Air flotation infeed table Anti-adhesive liquid spray system Pre-milling unit with diamond cutters Edge feeder for edge banding from coil or strips Glue station for GlueJet cartridges or L-Tronic laser technology 4 pressure rollers with pneumatic pressure adjustment Edge lubricant spray system Dual-motor precision end trimming unit with pneumatic angle adjustment Top and bottom edge surplus trimming unit (straight trimming) Numerically adjustable profile edge milling unit Flat scraper Kedpfjyrniiox Ahvjdi Profile scraper – two profiles Cleaning liquid spray system Pneumatically activated buffing units Pneumatically activated edge buffing unit Feed speed continuously adjustable from 10 to 25 m/min Automatic lubrication of the feed chain Frame support Minimum workpiece length: 140 mm Workpiece thickness: 8–60 mm Minimum workpiece width: 60 mm Year of manufacture: 2016

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Kjdpjvvkfdsfx Ahvjdi

Condition: used, Storage location: Nattheim Ksdpfevvkrdox Ahvodi

Condition: used, Year of construction: 2011, Weight: approx. 4500 kg Storage location: Nattheim Kdjdpfevvi R Eox Ahvei

Condition: used, Year of construction: 2006, EVA glueing, 2 pressure rollers, cross-cutting station, pre-milling cutter and rounding cutter, surface scraper, transport device Kdodpfx Ahevvkg Iovoi Storage location: Nattheim

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Storage location: Nattheim Kdjdpfx Aevvi Spshvoi

Condition: excellent (used), Year of construction: 2008, Nabízíme k prodeji velmi zachovalé CNC obráběcí centrum HOLZ-HER EASY-MASTER 7018K. Stroj je zkontrolovaný, pravidelně servisovaný a připravený k okamžitému použití. 🔧 Výbava a přednosti stroje: • Výkonné hlavní frézovací vřeteno 6,5 kW (HSK 63 F) • Vrtací agregát: - 10 vertikálních vřeten pro vrtání do plochy - 4 horizontální vřetena pro vrtání do hran (2× osa X, 2× osa Y) • Drážkovací agregát s pilou • Silná vakuová vývěva BECKER • Zásobník nástrojů: 8 pozic + paměť na 6 nástrojů mimo stroj • Přehledný ovládací sloupek, dálkové ovládání • Intuitivní řídicí software CAMPUS • Sada vakuových přísavek + Bonus - otočné přísavky ⚙️ Konstrukce • Vysoce přesné zakryté lineární vedení, chráněné proti prachu a nečistotám • Dlouhodobě stabilní přesnost, vysoká tuhost a dlouhá životnost 🚚 Dodání a servis • Zajistíme dodání stroje na klíč: • doprava • instalace • seřízení • zaškolení obsluhy • Samozřejmostí je zajištění náhradních dílů, spotřebního materiálu, maziv a pravidelný servis. Kdedpsyc Ullofx Ahvsi 💰 Cena: dohodou 🧾 Možnost odpočtu DPH 📦 Dostupné ihned

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Equipment: documentation/manual, We offer for sale a very well-maintained HOLZ-HER 6210 panel saw center. The machine has been inspected, regularly serviced, and is in very good technical condition. Kdjdpfxeydn Rqo Ahvsi 🔧 Basic parameters: • Working cut dimensions: 4250 × 3850 mm • Overall machine dimensions: 6636 × 4420 × 1980 mm • Main motor: 11 kW • Scoring motor: 2.2 kW • Manual mode, EasyPlan, cutting optimization ⚙️ Construction: • Robust frame and precise guides • Stable and accurate operation even with larger panel sizes

Condition: new, Edgebanding Machine HOLZ-HER 1308 XL AURIGA POWER -Showroom machine- Innovation: GLUJET GJ725 This offer concerns an equipment package. The following components and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W control system - ECO MODE energy-saving mode - Jointing cutting unit FG201 with 2 milling heads - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feed 1903 - Glue application system Glu Jet GJ725 NC PUR PRO - Pressure unit 1912-3 pneumatic Ksdju R Sy Aepfx Ahvsdi - End trimming unit 1918 pneumatic 60 mm - Multifunctional milling unit FR301 MOT6 - Diamond milling cutter Ø 56/60 mm, left-hand rotation - Diamond milling cutter Ø 56/60 mm, right-hand rotation - Corner rounding unit FF301 MOT1 - Scraper unit ZK301 MOT4 incl. high-gloss package - Carbide reversible knives for scraper carrier - Chip collection box for scraper unit - Buffing unit 1940 - Spray device TR301 for infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic-adaptive pressure and glue quantity control - Extended infeed fence 1,252 mm - Motorized adjustment for infeed fence - Pressure unit DW301 with motorized NC axis - Extraction hoods for end trimming unit 1918 - Shelving program - Surface scraper FK701 - Spray device GM301 after the pressure unit - new showroom machine -

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, cutting width (max.): 3,100 mm, saw blade diameter: 300 mm, section length (max.): 3,100 mm, Equipment: CE marking, scorer, HOLZ-HER Pressure Beam Saw LINEA 6015 Cutting length 3100 mm x cutting width 3100 mm Saw blade projection 68 mm Grooves up to 25 mm (bi-directional) 7.5 kW main saw motor 2.2 kW scoring saw motor 3 air-cushion tables 1800 mm with feed rollers Cut-out & recess device (for window cut-outs and insertion grooves) Side pressure, program-controlled Kjdpfxeyngt Sj Ahvodi Eco mode Handheld control device Label printer and software Easy-Plan optimization (upgrade and office version available) and much more... 12-month warranty Delivery, installation, and operator training of the machine can be arranged directly through us for an additional charge. The machine is currently located at our distribution warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign-language version, only the German version is legally binding. Our General Terms and Conditions can be found on our website at holzher.de/en/terms-and-conditions.

Condition: used, functionality: unexamined, machine/vehicle number: 1205, input voltage: 380 V, Used Holz-Her 1205 Vertical Panel Saw – Wall Saw – Panel Saw with Saw Blade Manufacturer: HolzHer Model: 1205 Kdsdpfxjxiwvlj Ahvei Cutting range: 445 cm width, 175 cm height Voltage: 380 volts.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Working area X: 4520 mm Working area Y: 1600 mm Working area Z: 300 mm 5-axis electrospindle unit, 12 kW power, liquid-cooled, HSK 63F interface Vertical drilling heads: 18 Horizontal drilling bits X: 4 Horizontal drilling bits Y: 2 Slotting saw in X direction 18-position tool changer (carousel) 1-position tool changer for saw blade Kodpfx Aheyl Uw Hevjdi Worktable with 8 bars WS8 clamping device, 200 mm Software: Campus V7 Plus CAD/CAM Vacuum pumps Safety platforms Red laser push button Remote control panel PC-based control system Automatic centralized lubrication

Condition: used, Holz Her Auriga 1308 XL Compact design – Edge thickness 0.4 - 8 mm SPS screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor iTronic adaptive pressure and glue quantity control with flushing routine Pre-milling unit for jointing before gluing Fully automatic edge magazine for coil and strip material Glue application station GLU JET cartridges + PU gluing, with tracing nozzle Workpiece height 8-60 mm High gloss package Pneumatic pressure unit Pneumatic end trimming unit for coil and strip material up to 8 mm edge thickness, with pneumatic swivel from 0-10° angle of the end trimming saws Multifunctional milling unit 1827 MOT4 for flush trimming up to 8 mm, radius milling and 15° chamfer milling via NC axes Corner rounding unit – rounding corners up to 3 mm edge thickness, working height 12–60 mm, postforming possible Scraper unit 1929 MOT4, for chamfers and radii with 2 scraper holders via NC axes Surface scraper unit FK701 with pre- and post-sensing – finish Buffing unit – polishing Spraying device at infeed and outfeed Spraying unit with lubricant for high-gloss edges Kdsdpfx Asyh Ilyshvji Complete DIA tool set included First delivery in 2021 Machine is in TOP CONDITION from business closure – small company Available from stock in Lieboch