Used Holzher Cut 1255 for sale (164)

Year of construction: 1989, condition: good (used), - tilting spindle under the account - shaft diameter 50mm - up and down adjustment - pneumatic adjustment of the spindle position Laedogxpilspfx Ab Ujh - 400V power supply - THE FEED IS NOT THE SUBJECT OF THE OFFER

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 985 mm, travel distance Z-axis: 70 mm, feed length X-axis: 1,500 mm, feed length Y-axis: 985 mm, feed length Z-axis: 70 mm, nominal power (apparent): 10 kVA, workpiece length (max.): 3,200 mm, workpiece width (max.): 1,200 mm, workpiece height (max.): 70 mm, Holz-Her Evolution 7405 Connect Ledpsxg Tc Nsfx Ab Uoah

Condition: used, Year of construction: 2014, machine/vehicle number: 194/1-406, Laufrichtung der Platte : vom Bediener nach rechts max. Anleimerstärke : 3 mm min. Werkstückdicke : 8 mm max. Werkstückdicke : 60 mm min. Werkstückbreite : 65 mm min. Werkstücklänge : 160 mm Vorschubgeschwindigkeit : 10 m/min Fügeaggregat : Ja, mit 2 Fräsaggregaten Fügewerkzeug : Diamant- Fräser Durchmesser: 70 mm Höhe: 48 mm Verstellung des Einlauflineals : manuell Kappschere bis : 3 mm Einzelzuführung der Kante : möglich Beleimung : GlueJet Pu- Beleimung : möglich Kappsäge : Ja Kombiaggregat Bündig/Fase/Radius : pneumatisch zustellbar Abrundaggregat : pneumatisch zustellbar Stk Profilziehklinge : ja Flachziehklinge : Ja Aggregatenanzeige : am Display Steuerungsart : Über Endschalter Bedienung : Bedienpult mit Tasten Laedjw R Hirepfx Ab Ujh Fahreinrichtung : Nein Ausziehbare Rollenauflage : Ja Schutzhaube : Ja Arbeitshöhe bzw. Aufgabetischhöhe : 874 mm Gewicht ca. : 1400 kg Absaugdurchmesser : 160 mm

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Lajdpfxjw Rhiyo Ab Uoh Features and technical data: Cutting length: 5300 mm Cutting height: 2200 mm Max. workpiece thickness: 80 mm Motor: 5.5 kW Compressed air connection: 6 bar, 50 NL/min Extraction connection: 2 x 100 mm, 1200 m³/h Pneumatic aggregate locking Pneumatic aggregate penetration Digital horizontal display Availability: by arrangement Location: Flörsheim

Condition: excellent (used), Machining Centre HOLZ-HER Evolution 7405 - used - Through-feed processing, 4-sided edge trimming possible, automatic suction cup positioning, hardened, dust-protected prism guides, ball screw drives on all axes, network card for remote maintenance, integrated control cabinet, control cabinet cooling with heat exchanger, manual control device, saw unit for grooving in the X direction, pick-up tool changer Ljdsxddhkepfx Ab Ueah ----- Technical Data ----- Minimum workpiece length X: 200 mm Minimum workpiece width Y: 70 mm Minimum workpiece thickness: 8 mm Maximum workpiece length X: 3,200 mm Maximum workpiece width Y: 920 mm Maximum workpiece thickness: 70 mm Machine control software: CAMPUS HOPS Main spindle motor power: 6.5 kW Main spindle speed: 1,000 - 18,000 rpm Main spindle mount: HSK-F63 Drilling unit motor power: 1.7 kW Drill spindle mountings: M10, precisely fitted 11 mm Number of vertical drill spindles: 9 pcs Number of horizontal double drill spindles in X direction: 2 pcs Number of horizontal double drill spindles in Y direction: 1 pc Saw blade diameter of saw unit: 120 x 20 mm Number of tools in changer: 6 pcs Extraction connection diameter: 2 x 120 mm + 1 x 140 mm Required air volume flow: 4,100 m³/h Required static negative pressure: 2,500 - 3,000 Pa Required air velocity: 30 m/s Compressed air connection: 6 bar Compressed air requirement: 300 NL/min Dimensions (LxWxH): 3,673 x 1,924 x 2,340 mm Quality info: - Completely basic cleaned - Electrical system checked - Pneumatics checked - Adjusted according to manufacturer specifications - Immediately ready for operation

Condition: used, Panel saw Manufacturer: Holz-Her Model: 1265 Year: 1989 Technical specifications Working dimensions Cutting dimensions (mm) Length x Height 3300/4300 / 5300 x 1900 4300 / 5300 x 2070 4300 / 5300 x 2200 Trimming height = max. Cutting height - 65 mm Cutting depth (mm): 45 (50) Cutting depth depends on the workpiece Dimensions in brackets without Super Cut Saw unit Motor power: 3 kW, 400 V, 50 Hz Saw blade diameter (mm): 220 Saw blade speed (min) at 50 Hz: 5450 Extraction Air consumption (m/h): 2000 Air speed (m/s): 20 Connection (mm): 160 Machine dimensions Floor area Length (mm): 4315 / 5315 / 6315 Depth (mm): 1420 Height (mm): 2500 / 2640 / 2775 Weight (kg): approx. 760 (5300 x 2200mm) Lasdpfx Abow I A Dye Ush Gross weight (kg): approx. 990 (5300 x 2200 mm)

Condition: excellent (used), Edge bander Holzher Streamer 1057 Pre-milling units Glue application, GLUE JET cartridge glue system Laedpsxf H Rdofx Ab Ush Suitable for PUR glue Equipped with glue discharge Pneumatic pre-cut guillotine Pressure rollers Final trimming saws, angle adjustable Top and bottom milling units R1, R2 Corner rounding unit Profile scraper Flat scraper Max edge banding height: 45 mm Max edge thickness in roll: 3 mm Machine length: 460 cm Feed speed: 10 m/min

Condition: used, Holz Her Auriga 1308 FÜ + PU Compact design – edge thickness 0.4 - 6 mm SPS screen control Edge-Control PPC 221 color display Laodpfxsxbf Sxo Ab Ush Pre-milling unit for jointing before the glue application station Fully automatic edge magazine for coil and strip material Gluing station GLU-JET for EVA and PUR adhesives, cartridge or granulate + PU Adhesive application via nozzle technology Workpiece height 6-65 mm automatic glue height adjustment Pressure unit 1912-3 pneumatic End trimming unit 1918 pneumatic for coil and strip material up to 8 mm edge thickness With pneumatic adjustment from 0-10° tilting of the saws Milling unit 1827 MOT 4, flush trimming 8 mm, radius milling – chamfer milling – 15° 1827 MOT NC axes via control panel Corner rounding unit 1832 SPS, rounding of corners up to 3 mm edge thickness in through-feed Scraper unit for chamfer and radius with 2 scraper holders - MOT Flat scraper unit – finish Spray device – PU Complete DIA tool kit included Machine is FACTORY-REFURBISHED in TOP CONDITION Available ex stock Lieboch

Condition: excellent (used), Year of construction: 2015, HOLZ-HER Sprint 1329 - Used edge banding machine in good condition. - Year of manufacture: 2015 - Includes BARBARIC return conveyor (year: 2017) - Available from end of November/beginning of December 2025 Ljdpjxducrsfx Ab Uoah Please feel free to contact us if you have any questions.

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Condition: as new Includes 6 months full warranty! Only 70 operating hours; the machine has not yet been used in production! Equipment and technical data: BASE MACHINE Holz-Her Processing Center DYNESTIC 7535 10.5 Lift Processing length: 3100 mm Machine frame: welded construction with ground and hardened prism guides for the gantry, aggregate head, and consoles. Gantry design. Rack-and-pinion drive, helical gears in X and Y direction, 1 precision ball screw in Z direction for accurate positioning. MATRIX TABLE Fixed, continuous processing table with grid markings and through-slots in X and Y direction, slot spacing 50 mm. Includes 25 meters of sealing cord for fixing the sacrificial plate. 1 work zone with stop rails/stops - stop height 30 mm, pneumatically retractable. 2 stop rails in Y direction and 1 stop in X direction right (as seen from the front of machine). Remote maintenance capability Integrated network card for transfer of control and program data. Data transmission via high-speed internet connection. Requirement: High-speed internet connection at the machine. USB port For data backup and for directly importing processing programs at the control panel. TECHNICAL DATA Working dimensions 7535 10.5: Max. nesting table surface: X = 3100 mm, Y = 1560 mm Max. travel paths: X = 4695 mm, Y = 2305 mm, Z = 565 mm Max. machining height 7535/7735 Classic without pusher: Z = 300 mm from table top (excluding sacrificial plate) Max. pusher clearance height above table for Push/Auto/Lift versions: Z = 250 mm from table top (excluding sacrificial plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min MACHINE OPERATION SOFTWARE Laedpjwxz Uysfx Ab Ush CAMPUS V7 PLUS CAD/CAM software, 1 license incl. material removal simulation BetterSim 1 software license secured via dongle for the machine CAMPUS V7 PLUS software for CNC processing centers: Consisting of: 1. CAMPUS NC-HOPS 2. CAMPUS aCADemy 3. CAMPUS MT-Manager 4. CAMPUS Workcenter V7 PLUS 5. CAMPUS 3D material removal simulation BetterSim CAMPUS NC-HOPS Graphical variant system with conversational programming and CAD/CAM features for creating part variants using macro technology. Hi-Speed USB-Device Network Server Allows use of the CAMPUS single license on the machine or a PC in the same network. Only one license may be used in the network at a time! Additionally: CAMPUS V7 PLUS CAD/CAM software, 1 license incl. material removal simulation BetterSim 1 software license secured via dongle for office or machine CAMPUS V7 PLUS software for CNC processing centers: Consisting of: 1. CAMPUS NC-HOPS 2. CAMPUS aCADemy 3. CAMPUS MT-Manager 4. CAMPUS Workcenter V7 PLUS 5. CAMPUS 3D material removal simulation BetterSim CAMPUS NC-HOPS Graphical variant system with conversational

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, HOLZ-HER Dowel Drilling & Inserting Machine POWER-PIN 7605 • Minimum workpiece length 60 mm, maximum unlimited – limited only when workpieces are positioned against the stop elements. • CAPMUS V7x POWER-PIN software Laedpfx Abjxdlwge Ujh • LED strip for easy orientation • Dowel insertion unit DA102 for pre-glued dowels, as well as use with raw dowels in combination with white glue. The POWER-PIN dowel machine – suitable as a standard dowel inserting machine or the perfect addition to, for example, nesting or console machines. From carcase furniture to high-quality solid wood drawers with a minimum material thickness of 12 mm, the 7605 is the ideal machine for drilling and inserting wooden dowels. The continuous LED strip displays the machine status and indicates to the operator the correct insertion position for the workpiece. A barcode scanner can be used to scan, for example, DataMatrix codes containing the processing instructions for the workpiece. Drilling positions and depths are automatically adjusted and approached by the machine. Also visit our Classic Shop on our homepage.

Condition: excellent (used), Machining center HOLZHER Dynestic 7521 -used- Nesting table, pusher with suction device, unloading unit with conveyor belt, hardened, dust-protected prismatic guides, 2-sided guided portal design, helical rack and pinion drive (X- and Y-axis), Network card for remote maintenance, Control cabinet cooling with heat exchanger, manual control unit, Swivel saw unit, Plate tool changer on the move, incl. step mats, laser, Automatic central lubrication, New industrial PC, incl. nesting software with free-form boxes ----- Technical data ----- Processing length X: 4,600 mm, Processing length Y: 2,100 mm, max. traversing speed X: 80 m/min, max. traversing speed Y: 100 m/min, max. traversing speed Z: 25 m/min, Machine control software: CAMPUS HOPS, Motor power main spindle: 7.5 kW, Main spindle speed: 1,000 to 24,000 rpm, Ledpfju R Tcrjx Ab Usah Main spindle holder: HSK 63F, Spindle cooling: liquid, Motor power drilling unit: 3.0 kW, Mounting of drilling spindles: M10, fit 11 mm, Number of vertical drilling spindles: 18 pcs, No. horiz. Double drilling spindles in X-direction: 2 pcs, No. horiz. Double drilling spindles in Y-direction: 1 piece, Vacuum pump output: 500 m³/h, Suction connection Ø: 250 / 200 + 2x 80 mm, Compressed air connection: 6-8 bar, Compressed air requirement: 300 l/min. Quality info: - Complete basic cleaning - Electrics checked - Pneumatics checked - adjusted according to manufacturer's specifications - ready for immediate use

Condition: excellent (used), Year of construction: 2020, 158.000 running metres BASE MACHINE AURIGA 1308XL TECHNICAL DATA Edge banding machine for edgebanding and finishing of sheet materials Edge thickness of roll material: 0.4-3mm (depending on material) Edge thickness of strip material: 0.4-8mm (depending on material) Edge cross-section: max. 6x42mm Edge height: max. 65mm Workpiece thickness: 8-60mm (restrictions possible for individual units) Workpiece width: min.65mm Workpiece length: min.160mm (without corner copying 1832) Workpiece length: min.180mm Feed speed: 10m/min. MACHINE OPERATION Edge Control 19 with 18.5" touchscreen colour monitor 16:9 Powerful control system with extremely simple operation for efficient machine set-up and changeover. Rotating and swivelling control panel at eye level Motorised pressure bridge adjustment iTronic - Adaptive pressure and adhesive quantity control Automatic, programme-dependent fine adjustment Optimum adaptation to edge thickness, edge materials and adhesive types guarantees the best processing results Automation package consisting of - Automatic glue quantity control - adaptive snipping knife - adaptive printing unit incl. residual adhesive quantity display incl. fully automatic PUR flushing routine Premilling unit FG201 with 2 milling heads for joining the panel edge 1x counter-rotating, 1xsynchronised, Milling cutter, diamond Ø70x64x30 mm,Z2+2 Edge feeder 1903 automatic transport of rolls and strips max. loading capacity: 40 mm Glu Jet GJ301 glue application system (2,3kW,50Hz) Automatic glue height adjustment Glu Jet hybrid technology for EVA and PUR adhesives Adhesives in cartridge and granulate form for neutral and coloured adhesives Lajdpfx Aexayvpsb Uoh Hopper for 1.4 kg cartridges (4 cartridges) Hopper for 1.5 kg granulate Pneumatic pressure unit 1912-3 First roller driven with pneumatic immersion control, 2 conical holding pressure rollers Cutting unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12000 min-1) pneumatic swivelling 0/10° Dust extraction hoods for end trimming unit 1918 Multifunctional trimming unit 1827 MOT4 for trimming the top and bottom longitudinal edge with motorised positioning of the horizontal tracing shoes with motorised positioning of the trimming motors in axial direction incl. pneumatic adjustment (top and bottom separately) for flush-radius routing incl. blow nozzles - Flush cutting unit - Radius - Tilt the chamfer 0 - 15°, manually (with max. edge thickness 6 mm) Pneumatic swivelling device for trimming unit 1827 MOT4 Pneumatic swivelling to bevel 15° from the control unit Pneumatic vertical tracer rollers Adjustment of the vertical tracer roller by 0.1 mm for routing with edge overhang Corner rounding unit (1x0,35kW,200Hz,12000min-1) Corner copying function up to 3 mm edge thickness Workpiece thickness: 12 - 60 mm, with DIA tool R=2mm Scraper unit 1929 MOT4 incl. high-gloss package with motorised adjustment of the horizontal feeler rollers, incl. pneumatic adjustment (separate top and bottom) Surface scraper FK701 With pre- and post-scraping for removing the adhesive residue along the complete panel length for a clean glue joint. Buffing unit 1940 (2 x 0,09 kW, 50 / 60 Hz, 1400 min-1) For finishing and polishing edges, with 2 textile discs, swivelling 0 - 5°

Condition: used, Holz Her Sprint 1317-1 FÜ + PU heavy-duty design – edge thickness 0.4 – 5 mm SPS screen control large LCD display pre-milling unit before gluing area fully automatic edge magazine for coil and strip material glue application station for cartridges + PU gluing Ledpfx Abewtz T Ss Usah maximum edge height 51 mm automatic glue height adjustment press unit 1913, motorized pneumatic trimming unit for coils and strips with pneumatic adjustment for miter saw angle from 0–10° multifunctional milling unit 1942 MOT 2 milling unit with motorized adjustment axes for various radii – chamfering – flush milling via SPS copy milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm scraping unit for chamfers and radii pneumatic infeed and outfeed finish – surface scraper regular maintenance by Holz Her machine is FACTORY SERVICED, in EXCELLENT CONDITION available from stock in Lieboch

Condition: new, Year of construction: 2025, Showroom machine Year of manufacture: 2025 Features and technical specifications: - Base machine DYNESTIC 7507 10.57 push Laedsxc Rmkspfx Ab Ujh - Upgrade from BetterNest rectangular nesting to: CAMPUS BetterNest freeform nesting software - Uninterruptible Power Supply - UPS (ZB27) - Touchtool tool length measurement - 10.3 kW router spindle - Drilling unit with 14 spindles - 1 additional machining field (Field A) at the rear with 1 stop, height 70 mm, pneumatically retractable - 2 electronically monitored side stops at the front, Field A + D, in X-direction for the front stop row (BF8) - 10-position tool changer 7873 - Tool changer 7872, one-position aggregate magazine, pivotable in X and Y direction for Clamex aggregate - 2 x 140 m³/h and 1 x 250 m³/h dry-running vacuum pumps, 400 V - 16-circuit vacuum system (VF16) - software controlled, incl. additional 25 meters sealing cord - Laser pointer - red (one laser pointer) Field D (ZB8) for positioning of vacuum suction cups or tracing the workpiece contour - Automatic central lubrication - Vacuum suction cups for smooth table surfaces, complete, 140x115 mm, height 30 mm with connecting hose - Thin sheet ejector as an addition to the ejector for special materials below 4 mm material thickness and standard wood-based materials under 2 mm - Complete conveyor belt, pusher conveyor belt, pusher table - TouchLabel PRO - touchscreen and label printer mounted on stand - Production control computer NEXTEC 4.0 - Extraction funnel at the end of the pusher conveyor belt - Availability: by arrangement - Location: Flörsheim

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,747 mm, travel distance Y-axis: 1,554 mm, travel distance Z-axis: 325 mm, workpiece length (max.): 3,620 mm, workpiece width (max.): 1,500 mm, workpiece height (max.): 180 mm, Equipment: rotational speed infinitely variable, Holz-Her / Machining Center PRO-MASTER 7017 - 2 software licenses (Office & Machine) Campus V8 CAD / CAM software - Machining area for milling = 3425 x 1287 mm (minus cutter radius) - Maximum workpiece height: 180 mm, measured from the top edge of the vacuum cup: 125 mm. - Maximum pass-through width at hood: 1450 mm (Y-direction) - The milling spindle delivers 10.3 kW (S6) and accepts tools with a maximum diameter of 160 mm via HSK interface. - Vector axis / C-axis can be retrofitted Lsdpsxdlrdefx Ab Usah - Drilling unit with 14 spindles: 10 vertical and 4 horizontal. Maximum drill diameter: 35 mm. Integrated saw unit for a saw blade with a maximum diameter of 125 mm and 4 mm thickness. - 12-position linear pick-up tool changer for HSK 63F holders for tools up to a maximum diameter of 95 or 100 mm. Please also visit our "Classic Shop" on our homepage.

Condition: used, functionality: fully functional, Edge thickness 0.4 – 3 mm SPS screen control Lsdpfx Abew Igg Ss Uoah Fully automatic edge magazine Fully automatic roll magazine – cross-cut shears Cartridge + PU gluing station + automatic dosing nozzle Workpiece height 6 – 45 mm End trimming unit swivels at 0 and 10 degrees Flush, bevel, and radius milling, swivels up to 15 degrees Profile scraper Buffing unit Soundproof cabin CE version Machine is FUNCTION-TESTED and in GOOD CONDITION ex works

Year of construction: 2014, condition: used, Used machine Year of manufacture: 2014 Condition: well maintained Technical data: Processing length in X = 200 - 3200 mm Max. travel without re-clamping 1300 mm in Y = 70 - 920 mm Material thickness Z = 8 - 70 mm Equipment: Milling unit: 6.5 kW (S6-40), air-cooled with HSK-F 63 tool holder Drilling unit: 1.7 kW, 15 spindles Tool changer: 6-way magazine pick-up system, pneumatic 19" flat screen Campus software 1 machine license inc. Cabinet Control light ECO vacuum system, 1-circuit vacuum system 8m³/h Automatic central lubrication combined lubrication points for all linear guides in X, Y and Z directions Milling tools are not included Scope of delivery! Availability: short term Lajdew Nafwepfx Ab Ush Location: Röllbach

Condition: used, Used machine Equipment and technical specifications: Automatic edge feeder Cartridge glue system 4-roll printing unit Cross-cut saw unit Flush trimming unit Combination trimming unit: flush/bevel/radius Radius scraper Buffing unit Lsdsw Nad Hopfx Ab Usah Edge band thickness 0.3 - 20 mm (depending on unit) Edge band height max. 66 mm Edge band length min. 200 mm Feed rate 8/16 or 12/24 m/min With LIGMATECH workpiece return system The return line of this return system is located above the panel processing level. The workpieces move back to the operator on an inclined plane. Special features compared to the ZHR 0x models: Automatic detection and rotation of parts from transverse to longitudinal Automatic adjustment of the rotation speed to the workpiece length Minimum and maximum workpiece dimensions For longitudinal edge processing: 2200 x 1000 For transverse processing with subsequent rotation: 250 x 120/2200 x 800 Maximum workpiece thickness: 60 mm Location: Bavaria Availability: Short-term

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Lajdpfxew I U Rfo Ab Uoh Specifications and technical data: Base machine 1057 XL C with Beckhoff touch-screen control Extendable workpiece support 600 mm Extension for extendable outrigger Standard infeed fence 3 LED lights in the infeed area Jointing unit with two motors DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation Edge feeding system 1903, fully automatic GluJet 301 adhesive application system Automatic reloading function Magazine for 1.4 kg adhesive cartridges (holds 4 cartridges) GluJet collection container Pressure unit 1912-3, pneumatic Spray device GM 201 after pressure unit End trimming unit 1918, pneumatic Extraction hoods for end trimming unit Combined trimming unit FR201 with DIA cutters R=2 mm Contour trimming unit 1832 Shelf program Radius scraper ZK 301 Chip collection box Flat scraper FK 701 Spray device front and rear TR201 Buffing unit 1940 Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2020, Used machine Year of construction: 2020 Equipment and technical data: Extendable workpiece support, spacing 600 mm Jointing milling unit FG201 with 2 milling heads for edge jointing on panels Cutter, diamond 70 x 64 x 30 mm, Z2 + 2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) Cutter, diamond 70 x 64 x 30 mm, Z2 + 2, right-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) Edge feeding 1903 automatic transport for rolled and strip material GJ301 adhesive application system with sensing nozzle Automatic refill function, level monitoring with automatic glue refill Pressure unit 1912-3 pneumatic, first roller is driven with pneumatic immersion control Lodew Nafdspfx Ab Uoah End trimming unit 1918 (60 mm), pneumatic, chamfering 0/10 degrees, pneumatic adjustment Extraction hoods for end trimming unit 1918 Multifunctional milling unit FR201 (2 x 0.6 kW, 18000 min-1) for flush, radius, and radiused exit Corner copying unit 1832 (1 x 0.35 kW, 200 Hz, 12000 min-1), corner copying function up to 3 mm edge thickness Cutter, diamond Ø 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm, with CM technology (LEUCO system) with integrated chip removal, for the contour milling unit 1832 Scraper unit 1929 Chip container HW reversible knives for scraper holder R = 2.0 mm (2 pcs required) FK701 FL-SCRAPER HM Location: Solingen Availability: Short-term

Condition: used, Year of construction: 1989, -Used machine- Year of manufacture: 1989 Condition: Refurbished and operational Fully automatic, vertical design, Cutting area 5,300 x 2,200 mm (cutting width x cutting height), Saw blade diameter 300 mm, Control system for vertical and horizontal cuts, With ALU folding stops and ALU intermediate support, Prepared for Supercut Laedpfx Abjxavq Ns Ueh With completely new housing including: - Pneumatics (plunge function) - Riving knife - Pressure shoe - Cover - V-belt pulley

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Laedpexavr Hjfx Ab Uoh Features and technical data: - Extendable workpiece support - Joint milling unit FG201 with 2 milling heads incl. DIA cutters - Fully automatic edge feed 1903 - Glue application system cartridge GlueJet 301 with automatic glue height adjustment (sensor-controlled nozzle) - Special accessory: pressure regulation of cartridge contact pressure - Pressure section 1912-3 pneumatic, first roller driven with pneumatic plunge control - End trimming unit 1918, pneumatic adjustment - Milling unit FR 201 multifunctional milling unit for flush, radius, and radius run-out incl. DIA cutters - Corner copying unit 1832 up to 3 mm edge thickness incl. DIA cutter - Scraper unit 1929 with 2 scraper holders - Chip collection box - Surface scraper 1964 Minimum workpiece length (mm): 160 Workpiece thickness (mm): 6 - 45 Edge thickness (mm): 0.4 - 3 Feed speed (m/min): 10 Total length (mm): 4630 Weight (kg): 1250 Availability: short notice Location: Flörsheim

Year of construction: 2025, condition: new, Exhibition machine Year of manufacture: 2025 Location: Flörsheim Availability: by arrangement Lodpfjxavtwjx Ab Ueah

Condition: new, Year of construction: 2025, New Machine Year of manufacture: 2025 Equipment and technical specifications: - Base unit: Vertical panel saw SECTOR 1257, cutting height 2200 mm x cutting length 5300 mm Laodpfxew Tfxws Ab Ueh - PowerPackage 400V incl. TRK extraction system, SuperCut scoring unit, digital vertical readout, stepless speed control (9 kW power) - Strip stop for repeat horizontal cuts, millimeter scale, max. strip height 650 mm - Alignment laser - Cut optimization package incl. touchscreen on operator panel Availability: Short-term Location: Flörsheim