Used Holzher Cut 1255 for sale (160)

Condition: used, Year of construction: 2001, Used machine Year of construction: 2001 Condition: Function tested Ksdsw I Ug Hepfx Afiedu Equipment and technical data: Milling aggregate 4.4 kW HSK 63 F tool holder Speed 1,000 - 18,000 rpm water-cooled Tool changer: 4-fold lateral Drilling head: 9 vertical drilling spindles in 32 mm increments Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X-direction Control: Twin CAm 32 Vacuum pump 40 cbm/h Incl. vacuum cups Travel distances: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Weight: approx. 3,500 kg Machine is delivered complete in all mechanical, electrical and electronic components and overhauled where necessary All guides checked; console guides replaced New PC control unit for the TWIN CAM control system All axis modules checked and serviced Location: Hochheim Availability: by arrangement

Condition: ready for operation (used), IM Very good condition. Kdodpfxsvunm Aj Afieu

Condition: used, Year of construction: 2022, operating hours: 107,577 h, functionality: fully functional, machine/vehicle number: 249/2-205 15516760, workpiece height (max.): 60 mm, height adjustment type: mechanical, pneumatic connection: 6 bar, chip removal for surfacing (max.): 3 mm, product height (max.): 60 mm, I am selling an edgebanding machine, HOLZ-HER STREAMER 1057 XL Classic, year of manufacture 07/2022; in very good technical condition, inspected by authorized service KRAL WOOD TECHNOLOGY, s.r.o. Žilina, Slovakia. Operating hours: 2,060 hrs. Total running meters: 107,577 Equipment: 1. Control panel with touchscreen and Vi.se function 2. Pre-milling unit – 2x with tooling, max. workpiece height 60 mm 3. GluJet – glue application system (for PUR and EVA cartridges) 4. Pressure unit – pneumatic 5. End trimming unit – top/bottom – twin motorized, pneumatic swivel 0–10 degrees for thin edging 6. Milling unit – manual adjustment – level 6 mm/radius 2/chamfer (radius run-out) 7. Corner rounding unit – single motor, up to max. workpiece height 60 mm 8. Radius scraper, radius 2 mm 9. Surface scraper Feed rate: 10 m/min The machine is equipped with a touchscreen display for machine parameters and a system to support machine setup. Vi.Se system Price of the offered machine: €29,500.00 excluding VAT, transport, and assembly/commissioning. Delivery: Immediately after receipt of payment A machine demonstration is possible by appointment in Žilina or online. Kedpfxjw Skuhs Afiodu Samuel Faško CEO / Managing Director / Commercial and Technical Consultant KRAL WOOD TECHNOLOGY, s. r. o. Predmestská 83 010 01 Žilina, Slovakia

Year of construction: 2006, condition: ready for operation (used), Glue type: PUR glue, glue application system: cartridges, max. edge thickness: 25mm, max. workpiece thickness: 60mm, feed rate: 16m/min, min. workpiece length: 140mm, min. workpiece width: 60mm. Including various spare parts and Ligmatec return. Documentation available. On-site inspection is possible. Kdsdpfx Asugmw Esfisu

Condition: good (used), Year of construction: 2001, I sell the 3-axis CNC working centre HOLZ-HER UNI-MASTER 7226 with beam table Year 2004. Configuration: 3-axis main spindle recently full reconditioned / Water cooled Kdsdpfx Aei U Dxujfiju Tool magazine 6 positions HSK63 on working head 1 grooving saw X-direction Drilling head 16+4 spindles Useful working area 3100x1360mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. 2x Pump SIEMENS ELMO-L S22 2,35KW. Good condition. Available immediately.

Condition: used, Year of construction: 1999, Holz-Her SPRINT 1411 edgebander Description Workpiece thickness min./max. 6/45mm Automatic edge feeder (coil up to 5mm) Workpiece min. 60mm Workpiece length min. 180mm Cartridge glue system (short heat up time 2-3 min.) End trimming unit Flush trimming unit Scraping unit (flat) Buffing (brushing) unit CE Kdjdpfxsw Ebrxe Afieu (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf).

Year of construction: 1994, condition: used, Used machine Year of manufacture: 1994 Condition: age-appropriate Equipment and technical data: Edging thickness max. 8 mm Workpiece thickness max. 60 mm Workpiece width min. 90 mm Operation via foot pedal Incl. extendable workpiece support Incl. chassis Incl. buffing unit Dimensions: approx. 700 x 600 x 1300 mm Weight: approx. 140 kg Kdjdpfxsw I Urve Afiju Suction nozzle: 70mm Availability: short term Location: Flörsheim

Condition: excellent (used), Horizontal milling machine Kodpow N Ryrsfx Afisdu Spindle diameter: 40 mm Spindle length: 220 mm Maximum spindle diameter: 250 mm

Year of construction: 1994, condition: used, functionality: fully functional, Available immediately! Kodeiffpmspfx Afijdu

Condition: used, Year of construction: 1997, HolzHer Edge Bander 1436SE Year of manufacture: 1997 - PVC Primus, 3mm PVC cartridge system - Edgebanding, flush trimming saw, flush trimming, bevel milling, radius milling - Scraper blade, buffing unit - Dimensions: 4700mm x 1400mm; Height: 1650mm - Weight: 1300kg - Working dimensions: Length 4500mm Depth 1020mm Height 1630mm - Connection socket: 140mm Ø - Workpiece width: min. 60mm - Feed speed: 11m/min Ksdpfxowv Uq As Afiedu - 6 bar - 400 Volt compressed air - Edge thickness: 8mm for strips, 2mm for rolls

Condition: good (used), Year of construction: 2000, I sell the edge banding machine Holz-Her Sprint 1417 year 2000: Premilling Edge banding patron glue End cutting saws Kdsdpfxjd Nukqj Afiou Strong flat milling Tilting radius milling Radius scrapers Corner rounding 1-motor Glue scrapers Polishing brushes New sharpened tools, new display, fully working. CE Mark. Good condition. With full documentation.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 558/0-112, Weight approx. 1950 kg control panel 1888 Pre-milling unit 1961 edge feeding unit 1901 tracer nozzle printing unit 1913 MOT cross-cut unit 1918 Milling unit 1942 top Milling unit 1942 top/bottom for round milling scraper 1929 Form milling unit 1983 Surface scraper 1964 Ksdpfsh Uyg Ejx Afiodu Buffing unit 1944 length approx. 5900 mm Connected load 21.4 A

Condition: used, Year of construction: 2010, Used machine Year of manufacture: 2010 Condition: Completely overhauled, excellent! Feed speed: infinitely variable, 10-18 m/min Control unit: edge control 19 with 18.5" color touchscreen display Jointing milling unit 1802 Edge feeder 1901 Glue application station Cartridge 1906MG, with tracking nozzle and automatic glue height adjustment Pressure unit 1913, pneumatic Kodpfxsw I Uhqj Afisdu End trimming unit 1918 Multifunction milling unit 1826 MOT 6 with 6 servo axes for flush, radius, and bevel milling Copy milling unit 1983 Radius scraper unit 1929 with pneumatic adjustment (retrofitted; see photo) Flat scraper 1964 Workpiece thickness: 6 - 60 mm Edge thickness: 0.4 - 8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Total length: 5195 mm Extraction connection: 180 + 80 mm, 2100 m³/h Compressed air connection: 6 bar / 327 NL/min Weight: approx. 2200 kg Availability: approx. 2-3 weeks after order confirmation Location: Flörsheim

Condition: reconditioned (used), Year of construction: 1993, functionality: fully functional, Weight approx. 1140 kg Connected load 380V 7.5kW Scoring unit 0.75 kW manually adjustable via pneumatic connection, can be raised and lowered Trimming length 2800 mm Ksdpfsq Au Huox Afisdu speeds 600/5000/4000/3000 rpm via V-belt Electric tilt with digital display Electric height adjustment with digital display Cutting width 1000 mm rear support table 950 x 400 mm wide angle fence 2500 mm with extension 2840 mm with 2 stops suction connection 120 mm + 80 mm for PSV Parallelogram protection device with narrow and wide hood Trimming fence Air requirement for scorer 6bar connection

Condition: new, Year of construction: 2023, Demo machine Year of manufacture: 2023 Equipment and technical data: Base machine 1057 XL C with Beckhoff touch-screen control Extendable workpiece support 600 mm Long infeed fence 1252 mm Jointing milling unit with 2 motors Ksdjw I Uytjpfx Afiodu DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation Edgebanding unit 1903 fully automatic Glujet 301 adhesive application system Automatic reloading function Magazine for 1.4 kg adhesive cartridges (holds 4 cartridges) GluJet collection container Pressure unit 1912-3 pneumatic Spray unit GM 201 after pressure unit End trimming unit 1918 pneumatic Extraction hoods for end trimming unit Combination milling unit FR201 with DIA cutters R=2 mm Profile trimming unit 1832 Shelf program Radius scraper ZK 301 Chip collection box Flat scraper FK 701 Spray unit front and rear TR201 Buffing unit 1940 Location: Solingen Availability: short notice

Year of construction: 1995, condition: not inspected (used), Connected load 380V 55A PMS control Pre-milling unit 1961 Magazine 1901 Glue station 1906 Printing unit 1926K Snipping unit 1916 Flush trimming unit 1962 Profile trimming unit 1966, 3 mm rounding up to 15 mm flush Rounding scraper 1927 Kdjdpfonxkm Eox Afiju Shaping trimming unit 1983 Buffing unit 1941 Extraction 1x160 1x125 mm Compressed air connection 6 bar

Condition: used, Year of construction: 2019, Used Machine Year of manufacture: 2019 Base Machine - DYNESTIC 7532-10.5 Automatic Dynestic Table For classic nesting machining with wear plate Processing length: 3100 mm Machine frame in welded construction with ground and hardened prism guides for the moving gantry, aggregate head, and consoles Gantry-type moving gantry Rack and pinion drive, helical gear, in X and Y axes, Kdsdewkbbdepfx Afisu Ball screw drive on Z-axis for precise positioning Technical Data: Working dimensions: Maximum support area on nesting table: X = 3100 mm, Y = 1560 mm Maximum travel distances: X = 4695 mm Y = 2100 mm Z = 293 mm Maximum clearance height DYNESTIC table: Z = 100 mm from table surface (without wear plate) Maximum programmable speed: Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min DYNESTIC table: Fixed, continuous processing table with grid pattern, continuous grooves in X and Y direction, groove spacing 50 mm with 25 meters of sealing cord for clamping the wear plate Vacuum Fields: 1-circuit vacuum system Drilling Unit 7877, 19 spindles Drive power: 1.7 kW 13 individually controllable vertical spindles U-shaped configuration 5+4 in X-direction and 4 in Y-direction 32 mm pitch Maximum drill diameter: 35 mm Total drill length: 70 mm from mounting end (depending on panel thickness) Spindle stroke: 70 mm Rotation: Alternating right / left Speed (n(max.)): 1000 – 4400 rpm, infinitely variable Mounting: M10 thread - 11 mm fitting Without tools, without holders 6 horizontal spindles 2 double drilling spindles in X-direction 1 double drilling spindle in Y-direction Mounting: M10 thread, 11 mm fitting Total drill length max. 63 mm from mounting end Without tools, without holders Milling Unit 7842: Power: 12.0 kW (S6) Speed (n(max.)): 1000 – 24000 rpm, infinitely variable, max power at 12000 rpm up to 24000 rpm air cooled with HSK-F 63 tool holder with right-hand thread nut (for right-hand rotating tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Maximum tool weight: 6 kg (incl. holder) Tools: Milling and grinding tools max. diameter 160 mm Safety enclosure according to CE regulations Safety fence at sides and rear Vacuum pump 500 m³/h dry-running Personnel safety through light barriers in front area of the machine Handheld remote control for machine operation to include the following operating functions: > Start/Stop of processing program > Speed control of processing cycles > Reset button > Manual feed/rapid traverse for all axes > Emergency stop CAMPUS V7 CAD/CAM Software 1x machine license Consisting of: 1. CAMPUS NC-HOPS 2. CAMPUS MT-Manager 3. CAMPUS Workcenter 4. CAMPUS DXF interface CAMPUS NC-HOPS Graphical variant system with WOP and CAD/CAM functionality for creating part variants using macro technology Automatic central lubrication Automatic lubrication at defined intervals Additional sealing against dust through overpressure in each carriage Simultaneous lubrication for all linear guides in X, Y, and Z axes, for all ball screw drives in Y and Z axes, for all milling spindle

Condition: as good as new (ex-display), Year of construction: 2023, saw blade diameter: 300 mm, cutting length (max.): 4,300 mm, cutting height (max.): 2,110 mm, cutting depth: 80 mm, power: 5.5 kW (7.48 HP), Equipment: scorer, Holz-Her vertical panel saw with TRK extraction system Kdjdpfx Afstwpgmjisu Type SECTOR 1262 automatic Cutting height 2200 x cutting length 4300 mm, cutting depth 80 mm Motor power: 5.5 kW Automatic saw feed for vertical and horizontal cutting, infinitely variable from 6-25 m/min. incl. the following accessories: - CE extraction unit - Pneumatic aluminum sliding grid - center workpiece support - longitudinal stop with digital dimension display - strip stop - digital dimension display for horizontal cut on the control panel - 3 adjustable stop points in the saw beam - SuperCut scoring device incl. 2 WPL knives - Narrow parts unit (2 pieces)

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Base Machine - DYNESTIC 7532-10.5 Automatic Dynestic Table For classic nesting operations with wear plate Processing length: 3100 mm Machine frame of welded construction with ground and hardened prism guides for the gantry, tool head, and consoles Gantry-type carriage Helical rack and pinion drive in X and Y axes, Ball screw in Z axis for precise positioning Technical Data: Processing dimensions: Maximum workpiece area on nesting table: X = 3100 mm, Y = 1560 mm Maximum travel paths: X = 4695 mm, Y = 2100 mm, Z = 293 mm Maximum clearance height on DYNESTIC table: Z = 100 mm from table surface (without wear plate) Maximum programmable speed: Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min DYNESTIC Table: Solid, continuous machining table with grid pattern, continuous grooves in X and Y directions, groove spacing 50 mm with 25 meters of sealing cord for clamping the wear plate Vacuum zones: Single-circuit vacuum system Drilling unit 7877, 19 spindles Drive power: 1.7 kW 13 individually selectable vertical spindles arranged in U-shape 5+4 in X-direction and 4 in Y-direction 32 mm pitch Max. drill diameter: 35 mm Total drill length: 70 mm from mounting end (dependent on panel thickness) Spindle stroke: 70 mm Direction of rotation: alternates clockwise/counterclockwise n(max.) 1000 - 4400 rpm, steplessly adjustable Mount: M10 thread - 11 mm locating seat Without tools, without collet 6 horizontal spindles 2 double drilling spindles in X-direction 1 double drilling spindle in Y-direction Mount: M10 thread, 11 mm locating seat Max. total drill length: 63 mm from mounting end Without tools, without collet Milling unit 7842 Power: 12.0 kW (S6) n(max.) = 1000 - 24000 rpm, steplessly adjustable, Max. output at 12000 - 24000 rpm air-cooled with HSK-F 63 tool holder with right-hand thread (for right-handed tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (including holder) Kodowka Upspfx Afiodu Tools: milling and grinding tools max. Ø 160 mm Safety enclosure according to CE standards Safety fence on the sides and rear Vacuum pump 500 m³/h, dry-running Personnel safety via light barriers in the front machine area Handheld remote control for machine operation with the following functions: > Start / Stop machining program > Speed adjustment of machining cycles > Reset button > Manual feed / rapid traverse for all axes > Emergency stop CAMPUS V7 CAD/CAM software 1x machine license Consists of: 1. CAMPUS NC-HOPS 2. CAMPUS MT-Manager 3. CAMPUS Workcenter 4. CAMPUS DXF interface CAMPUS NC-HOPS: Graphical variant system with conversational and CAD/CAM features for creating part variants using macro technology Automatic central lubrication Automatic lubrication at defined intervals Additional dust sealing by positive pressure in each guide carriage Simultaneous lubrication for all linear guides in X, Y, and Z axes, for all ball screws in Y and Z axes, for all milling spindle guides

Condition: reconditioned (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 869/9-302, Connected load 380V 21A Edge magazine gluing station 1906 printing unit 1914 Crosscut saw unit 1976 Milling unit rounding 1943 Rounding scraper 1927 Buffing unit 1944 Kdsdeiamufopfx Afisu Control panel top Suction nozzle D=100 mm operating instructions no exchange unit for flush milling

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Cutting height 2200 mm x cutting length 5300 mm (Edging height / max. horizontal cutting height 2110 mm) PowerPackage 400 V The package consists of the following options: 1. TRK extraction unit 2. SuperCut scorer 3. Vertical digital display 4. Stepless speed control (9 kW output) Pneumatic aluminum slatted support Medium workpiece support on all fields Strip stop for recurring horizontal cuts Digital measurement display for horizontal cut at control panel Visible cut line laser Paper storage compartment Kjdpfxowwdt Nj Afiedu Narrow parts device (2 pieces) Location: Solingen Availability: Short-term

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 315/0-110, Top control panel Edge feeding 1902 Glue application station 1906 cross-cut shear 1902 Printing unit 1816 Cross-cut unit 1918 Trimming unit 1942M Ksdjh Ux Sujpfx Afiodu Rounding scraper 1929 Form milling unit 1983 Surface scraper 1964 Buffing unit 1940 Weight approx. 970 kg Compressed air connection 6 bar suction connection Ø 120 mm Length approx. 5300 mm

Condition: new, Year of construction: 2023, MACHINESEEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Kdsdpfx Aewuwv Sjfisu MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. ----- New machine Year of manufacture 2023 Equipment and technical specifications: ARTEA 1030 BASE MACHINE Extendable workpiece support, 500 mm spacing Additional rigid workpiece extension, length 3080 mm Edge Control BC 15 with 15.6" touchscreen (Visual Setting mode) LED machine lighting for the processing units FG101 jointing unit with 2 diamond milling heads MG101 edge feeder Glu Jet GJ101 adhesive application system (2.3 kW, 50 Hz) Storage compartment for 1.4 kg cartridges (4 cartridges) GLU JET collection container Automatic reloading function KA101 trimming unit (50 mm) DW101 pressure unit Trimming, single-motor, linear guide FR101 multifunction trimming unit Flush 5 mm, R 2 mm Corner copying unit FF101, single-motor, linearly guided, 45 mm Scraper unit ZK101 Chip collection box Surface scraper FK101 Buffing unit SW101 Spraying device TR101 for the inlet and outlet areas Horizontal spraying device GM101 after the printing unit Availability: Short term Location: Hochheim

Condition: not inspected (used), Year of construction: 1991, Power connection 400V / 11kW suction connection Ø 1x100 mm Compressed air connection 6 bar weight approx. 980 kg width min/max 760 / 1605 mm, length 4425 mm, height 1720 mm Kdjdpfxoiw D Udj Afieu workpiece thickness min. 6 mm, max. 45 mm Workpiece length min. 180 mm workpiece width min. 60 mm feed rate 13 m/min edge thickness max. 5 mm, roll material 3 mm Edge magazine 1301 with DAZ 11 gluing station 1906 printing unit 1914 trimming unit 1976 Milling unit flush 1942 Milling unit radius R2 1943 scraper 1927 Buffing unit 1944

Condition: new, Year of construction: 2022, Exhibition machine Year of manufacture: 2022 Equipment and technical data: Base machine 7402 with Pin-Jet dowel insertion function Hand control device 2D barcode scanner Kdsdpfswt E Tvex Afiou UPS Quattro-HSK package incl. 4-position tool changer XL drilling head Double drilling spindle in Y-axis Automatic central lubrication Location: Hochheim Availability: approx. week 32/2022