Used Holz Her Sprint 1417 for sale (168)

Condition: good (used), Chip extraction, filter extraction, bagging filter -Drive: 0.96 kW -Speed: 2800 rpm Pedjb A E Uhepfx Ahyjpr -Connection: Ø 50 mm -Connection: 380 V -Dimensions: 780/470/H340 mm -Weight: 135 kg

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Condition: Machine completely overhauled and serviced Equipment and technical specifications: Infinitely variable feed speed: 10–18 m/min Edge Control 19 control system with 18.5" touchscreen color display Ppjdpfxjwka N Ts Ahyer Jointing milling unit Edge feeding Cartridge adhesive application station with sensing nozzle and automatic glue height adjustment Pressure unit End trimming unit Multifunctional milling unit Corner copying unit Radius scraper unit Surface scraper Buffing unit Workpiece thickness: 6–60 mm Edge thickness: 0.4–8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: short notice

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Condition: Functionally tested Equipment and technical data: Travel distances: - X-axis: 2,685 mm - Y-axis: 1,095 mm - Z-axis: 140 mm Milling aggregate: - 6 kW, water-cooled - Tool holder HSK 63 F - Speed 1,000 - 18,000 rpm - Tool changer: 6-position, lateral Drilling head: - 9 vertical drilling spindles at 32 mm pitch - Horizontal drilling spindle: 1+1 - Vertical drilling spindle: 1+1 Grooving saw: in X direction Control: Twin CAM 32 Pedpfx Ajx Enqbshyepr Vacuum pump: 100 m³/h Including vacuum suction cups Dimensions: 5200 x 2843 x 1855 mm Weight: approx. 3,500 kg Availability: as agreed Storage location: Lower Saxony

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Condition: Guides slightly worn, only suitable for rough cutting Equipment and technical data: Ppedpfxewqifkj Ahyjr - Cutting length: 4300 mm - Max. passage height: 2200 mm - Max. trimming height: 2100 mm - Max. scoring height vertical: 2100 mm - Cutting depth: 80 mm - Motor: 5.5 kW - Saw blade speed: 4500 rpm - Saw blade diameter: 300 mm - Extraction: 2 x 100 mm - Compressed air consumption: 60 NL/min Dimensions: 5620 x 1480 x 2990 mm Availability: short-term Storage location: Flörsheim

Year of construction: 1989, condition: good (used), - tilting spindle under the account - shaft diameter 50mm - up and down adjustment Podpfx Ahjgxpiloyspr - pneumatic adjustment of the spindle position - 400V power supply - THE FEED IS NOT THE SUBJECT OF THE OFFER

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and Technical Data: - For classic nesting processing with wear plate - Machine frame of welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry-type traveling column - Helical rack and pinion drive in X and Y axes, ball screw in Z axis for precise positioning Pjdpfswka Upjx Ahyepr - Working dimensions: - Max. support area on nesting table: X = 3100 mm, Y = 1560 mm - Max. traverse paths: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - Arranged in U-shape - 5+4 in X direction, 4 in Y direction - 32 mm spacing - Max. drill diameter: 35 mm - Total drill length: 70 mm from screw-on end (depending on panel thickness) - Spindle stroke: 70 mm - Rotational direction: alternating clockwise/counterclockwise - Speed (max): 1000 - 4400 rpm, infinitely variable - Tool holder: M10 thread, 11 mm fit - Without tool, without holder - 6 horizontal spindles: - 2 double drill spindles in X direction - 1 double drill spindle in Y direction - Tool holder: M10 thread, 11 mm fit - Max. total drill length: 63 mm from screw-on end - Without tool, without holder - Milling unit 7842: - Power: 12.0 kW (S6) - Max. speed = 1000 - 24,000 rpm, infinitely variable - Max. power at 12,000 to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck for HSK shank - Ceramic ball bearings (hybrid bearings) - Tool weight max. 6 kg (incl. holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety enclosure according to CE standard - Side and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Personnel safety ensured by light barriers in the front machine area - Hand-held control device for remote operation of the machine with the following functions: - Start/stop of the processing program - Control of processing cycle speed - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional sealing against dust via pressurization in each guide carriage

Condition: good (used), Year of construction: 2002, functionality: fully functional, Edgebander HOLZHER, type 1310, equipped with: cartridge glue station, flush end trimming, two multi-milling units, profile scraper, buffing units, condition good Ppedpfex H Sutjx Ahyjr

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Condition: Function tested Equipment and technical data: Milling unit: 4.4 kW Tool holder: HSK 63 F Speed: 1,000 - 18,000 rpm Water-cooled Tool changer: 4-position, lateral Drilling head: Ppodpew I Ug Hjfx Ahysr 9 vertical drilling spindles on a 32 mm pitch Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X-direction Control: Twin CAM 32 Vacuum pump: 40 cbm/h Including vacuum suction cups Travel paths: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Weight: approx. 3,500 kg The machine is completely checked for all mechanical, electrical, and electronic components and overhauled where necessary. All guides checked; console guides replaced New PC control system for the TWIN CAM control All axis modules checked and serviced Location: Flörsheim Availability: by arrangement

Condition: used, Year of construction: 2007, Used machine Year of manufacture: 2007 Equipment and technical data: Nesting system with grid table Processing dimensions: - X: 5000 mm - Y: 1240 mm - Z: 135 mm Traverse paths: - X: 5665 mm - Y: 1650 mm Pjdpfjwka Ipex Ahyspr - Z: 325 mm with milling unit 7933: - Motor 11 kW (S6) - HSK 63 - water-cooled with C-axis with 18-position disc tool changer with vacuum pump 250 m³ with handheld control device with central lubrication with minimum quantity lubrication system Availability: short-term Location: Röllbach

Condition: used, Year of construction: 2012, Used Machine Year of Manufacture: 2012 Base Machine - Dynestic 7521 20.6 Dynestic Table For classic nesting processing with wear plate Processing length 6250 mm (DYNESTIC 20.6 comes with additional 4th stop in Y already included) Machine frame in welded construction with ground and hardened prism guides for the gantry, unit head, and consoles Gantry-type design Rack and pinion drive, helical-toothed, in X and Y directions, Ball screw spindle in Z direction for precise positioning Technical Data: The technical data refers to the DYNESTIC 7521 - 20.6 Please refer to the respective datasheets. Processing Dimensions: Max. workpiece size for trimming: X = 6250 mm Y = 2100 mm Max. travel distances: X = 7360 mm Y = 2720 mm Z = 325 mm Pjdow I U Ecjpfx Ahyjpr Max. clearance height on DYNESTIC table: Z = 1st level 318 mm / 2nd level 418 mm from table surface (without tool, without holder) Maximum programmable speed: Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and observation window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system Windows XP 80 GB hard disk / 1 GB RAM RJ45 network port 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD writer) Remote maintenance Integrated network card for transmission of control and program data. Data transfer via high-speed internet connection required. Requirement: High-speed internet connection at the machine. DYNESTIC Table Fixed, continuous processing table with grid layout, continuous grooves in X and Y direction, distance between grooves 50 mm with 25 meters of sealing cord for fixing the wear plate 1 processing field with stop rails / stop Height 30 mm, pneumatically retractable 2 stop rails each in Y-direction and 1 stop in X-direction right side (from machine front edge perspective) Vacuum Fields Single-circuit vacuum system Drilling Unit 7976, 24 spindles Motor power 3.0 kW 18 vertical spindles, individually selectable L-shaped arrangement: 10 in X and 8 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from mounting end (depending on board thickness) Spindle extension stroke: 70 mm Rotation: Alternating right/left n(max.) 1000 - 5710 rpm steplessly adjustable Mounting: M10 thread - 11 mm fitting Without tool, without holder 6 horizontal spindles 2 double drilling spindles in X-direction (Distance 32 mm between 1st and 2nd horizontal spindle) 1 double drilling spindle in Y-direction Mounting: M10 thread, 11 mm fitting Max. total drill length 70 mm from mounting end Without tool, without holder Free slot 1 for: Optional double drilling spindle in X-direction or Vertical adapter with double pressing force Free slot 2 for: Optional saw in X-direction or Vertical adapter with double pressing force Milling Unit 7831, 2-stage Power: 11.0 kW (S6) n(max.) = 1000 - 24000 rpm, steplessly adjustable, two-stage feed stroke max. power at 12000 rpm to 24000 rpm Air-cooled with HSK-F 63 tool holder with right-hand rot...

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Equipment and technical data: Travel paths: - X-axis: 2,685 mm - Y-axis: 1,095 mm - Z-axis: 140 mm Milling unit: - 6 kW, water-cooled - Tool holder: HSK 63 F - Speed: 1,000 - 18,000 rpm Tool changer: 6-position, side-mounted Drilling head: Ppsdpfxjwka H Ej Ahyjr - 9 vertical drilling spindles, 32 mm pitch - Horizontal spindle: 1+1 - Vertical spindle: 1+1 Grooving saw in X direction Control: Twin CAM 32 Vacuum pump: 100 m³/h Includes vacuum suction cups Dimensions: 5,200 x 2,843 x 1,855 mm Weight: approx. 3,500 kg Availability: by arrangement Storage location: Röllbach

Condition: used, Used machine Equipment and technical specifications: Automatic edge feeder Cartridge glue system Ppjdpfx Ahow Nad Heyer 4-roll printing unit Cross-cut saw unit Flush trimming unit Combination trimming unit: flush/bevel/radius Radius scraper Buffing unit Edge band thickness 0.3 - 20 mm (depending on unit) Edge band height max. 66 mm Edge band length min. 200 mm Feed rate 8/16 or 12/24 m/min With LIGMATECH workpiece return system The return line of this return system is located above the panel processing level. The workpieces move back to the operator on an inclined plane. Special features compared to the ZHR 0x models: Automatic detection and rotation of parts from transverse to longitudinal Automatic adjustment of the rotation speed to the workpiece length Minimum and maximum workpiece dimensions For longitudinal edge processing: 2200 x 1000 For transverse processing with subsequent rotation: 250 x 120/2200 x 800 Maximum workpiece thickness: 60 mm Location: Bavaria Availability: Short-term

Condition: new, Year of construction: 2025, New Machine Year of manufacture: 2025 Equipment and technical specifications: - Base unit: Vertical panel saw SECTOR 1257, cutting height 2200 mm x cutting length 5300 mm - PowerPackage 400V incl. TRK extraction system, SuperCut scoring unit, digital vertical readout, stepless speed control (9 kW power) - Strip stop for repeat horizontal cuts, millimeter scale, max. strip height 650 mm Psdpfew Tfxwex Ahyopr - Alignment laser - Cut optimization package incl. touchscreen on operator panel Availability: Short-term Location: Flörsheim

Condition: new, Year of construction: 2025, Showroom machine Year of manufacture: 2025 Features and technical specifications: - Base machine DYNESTIC 7507 10.57 push - Upgrade from BetterNest rectangular nesting to: CAMPUS BetterNest freeform nesting software - Uninterruptible Power Supply - UPS (ZB27) - Touchtool tool length measurement - 10.3 kW router spindle - Drilling unit with 14 spindles - 1 additional machining field (Field A) at the rear with 1 stop, height 70 mm, pneumatically retractable - 2 electronically monitored side stops at the front, Field A + D, in X-direction for the front stop row (BF8) - 10-position tool changer 7873 - Tool changer 7872, one-position aggregate magazine, pivotable in X and Y direction for Clamex aggregate - 2 x 140 m³/h and 1 x 250 m³/h dry-running vacuum pumps, 400 V - 16-circuit vacuum system (VF16) - software controlled, incl. additional 25 meters sealing cord - Laser pointer - red (one laser pointer) Field D (ZB8) for positioning of vacuum suction cups or tracing the workpiece contour - Automatic central lubrication - Vacuum suction cups for smooth table surfaces, complete, 140x115 mm, height 30 mm with connecting hose - Thin sheet ejector as an addition to the ejector for special materials below 4 mm material thickness and standard wood-based materials under 2 mm - Complete conveyor belt, pusher conveyor belt, pusher table - TouchLabel PRO - touchscreen and label printer mounted on stand - Production control computer NEXTEC 4.0 - Extraction funnel at the end of the pusher conveyor belt Pjdpfx Ajxc Rmkohyopr - Availability: by arrangement - Location: Flörsheim

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Specifications and technical data: Base machine 1057 XL C with Beckhoff touch-screen control Extendable workpiece support 600 mm Extension for extendable outrigger Standard infeed fence 3 LED lights in the infeed area Jointing unit with two motors DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation Edge feeding system 1903, fully automatic Pjdpfx Aow I U Rfehyopr GluJet 301 adhesive application system Automatic reloading function Magazine for 1.4 kg adhesive cartridges (holds 4 cartridges) GluJet collection container Pressure unit 1912-3, pneumatic Spray device GM 201 after pressure unit End trimming unit 1918, pneumatic Extraction hoods for end trimming unit Combined trimming unit FR201 with DIA cutters R=2 mm Contour trimming unit 1832 Shelf program Radius scraper ZK 301 Chip collection box Flat scraper FK 701 Spray device front and rear TR201 Buffing unit 1940 Availability: short-term Location: Flörsheim

Condition: used, Panel saw Manufacturer: Holz-Her Model: 1265 Year: 1989 Technical specifications Working dimensions Cutting dimensions (mm) Length x Height 3300/4300 / 5300 x 1900 4300 / 5300 x 2070 4300 / 5300 x 2200 Trimming height = max. Cutting height - 65 mm Cutting depth (mm): 45 (50) Cutting depth depends on the workpiece Dimensions in brackets without Super Cut Saw unit Motor power: 3 kW, 400 V, 50 Hz Saw blade diameter (mm): 220 Saw blade speed (min) at 50 Hz: 5450 Extraction Air consumption (m/h): 2000 Air speed (m/s): 20 Connection (mm): 160 Machine dimensions Floor area Length (mm): 4315 / 5315 / 6315 Ppodpfxsw I A Dyo Ahyor Depth (mm): 1420 Height (mm): 2500 / 2640 / 2775 Weight (kg): approx. 760 (5300 x 2200mm) Gross weight (kg): approx. 990 (5300 x 2200 mm)

Condition: ready for operation (used), Year of construction: 2007, Brand: Holz Her Model: PRO-MASTER 7123K Serial no: 527/0-705 5010147 Year of manufacture: 2007 - 2 HSK cones included + various drills for drill box - Comes with a number of suction cups and some spare parts Tech. info: 4-axis (c-axis) 6 beams Motor-controlled adjustment of beams Number of vertical boring bits: 24 Number of vertical boring bits in X axis: 10 Number of vertical boring bits in Y axis: 8 Centres distance: 32 mm Horizontal double spindle in X axis: 2 Horizontal double spindle in Y axis: 1 Centres distance: 64 mm Working area: 3200x1260 mm Maximum travel path: X= 3866 mm Y= 1650 mm Z= 325 mm Workpeice pass height for tool change spindle with HSK 63F tool connection: 345 mm Max. machining thickness/ feed-in height (rear stop): 175 mm Podorz Irropfx Ahyepr Max. workpiece size for vertical bores: X=3730R/ 3460L mm Y=1570 mm Max. workpiece size for horizontal bores X: X=3450R/ 3370L mm Y= 1315 mm Max. workpiece size for horizontal bores Y: X=4760R/ 3300L mm Y= 1385 mm Max. workpiece size for edge milling, less cutter radius (tool 25 mmdiameter x 125 mm, HSK): X=3510R/ 3525L mm Y=1445 mm Z=280 mm Max. workpiece size for grooving in X (dim. centre grooving tool approx. 120 mm): X=3300R/ 3760L mm Y=1585 mm Max. workpiece size for grooving in Y (dim. centre grooving tool approx. 120 mm): X=3200R/3860L mm Y=1485 mm Max. travel speed X axis: 100 m/min Max. travel speed Y axis: 100 m/min Max. travel speed Z axis: 25 m/min Max. travel speed C axis: 60 m/min Motor power of boring unit: 3 kW Motor power of saw: 1,5 kW Motor power of electro spindle unit with clamping system: 6 kW Speed electro spindle 1000-18000rpm Power: 22 kW, 50 Hz, 400 V, 3-phase Compressed air: operating pressure 6,0 bar permissible limit pressure 8,0 bar Air requirement: 300 l/min Extraction capacity: approx. 5300 m3/h Dust nozzle diameter: 250 mm Size: Length with control cabinet: 6420 mm Overall width: 3760 mm Height with extractor hood: 2475 mm Weight: 4200 kg Program Campus NC-HOPS Operating system Microsoft Windows Graphic variants system with HOP and CAD/CAM properties For the creation of parts variants with macro technology Program operation Windows-conform surface configuration and operator guidance Macro / variant programming Indication and simulation modes Export and import facility to the various branch programs Interaction possibilities with a variety of branch programs Stock no: 2002061BXA with reservation for incorrectly presented technical data

Year of construction: 2010, condition: excellent (used), I sell the automatic vertical saw without scoring knives HOLZ-HER Supercut. Cutting range 5300x2200mm Motor 3,0kW. Cutting head tilting 0-90° Pedpfxopl Svcs Ahyjpr Main saw blade 240-250mm / 2850rpm. Condition very good. Available immediately.

Condition: good (used), Year of construction: 2000, I sell the 3-axis CNC working centre HOLZ-HER ECO-MASTER 7113 with beam table Year 2000. Podpott Sy Hofx Ahyepr Configuration: 3-axis main spindle 7,5 KW Tool magazine 4 positions HSK63 1 grooving saw X-direction Drilling head 9+2 spindles Useful working area 2300 x 1000 x 130mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. Pump RIETSCHLE 2,2 KW Good condition. Available immediately.

Condition: good (used), Year of construction: 2009, I sell the 3-axis CNC working centre HOLZ-HER PRO-MASTER 7023 with beam table Year 2009. Configuration: 3-axis main spindle 6 KW Tool magazine 8 positions HSK63 1 grooving saw X-direction Drilling head 16+4+2 spindles Useful working area 3200 x 1060 x 378mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. Pump BECKER 250 m3/hr. Ppedott S D Rspfx Ahyer Good condition. Available immediately.

Condition: excellent (used), Horizontal milling machine Ppjdpfx Aew N Ryrjhyjr Spindle diameter: 40 mm Spindle length: 220 mm Maximum spindle diameter: 250 mm

Condition: ready for operation (used), IM Very good condition. Psdsvunm Aopfx Ahyopr

Condition: defective spare-parts repository (used), HOLZ-HER 1230 Automatic. The machine's controller lacks the panel required for automatic formatting. With the help of an electrician, it can be converted to normal automatic operation. Ppedpfjuuf Akex Ahyjr Until then, operation is not possible in either manual or automatic mode. Industrial machine in good condition, but thus it is advertised in incomplete condition.

Year of construction: 1995, condition: not inspected (used), Connected load 380V 55A PMS control Pre-milling unit 1961 Magazine 1901 Glue station 1906 Printing unit 1926K Snipping unit 1916 Flush trimming unit 1962 Profile trimming unit 1966, 3 mm rounding up to 15 mm flush Rounding scraper 1927 Shaping trimming unit 1983 Buffing unit 1941 Ppjdsnxkm Ejpfx Ahyjr Extraction 1x160 1x125 mm Compressed air connection 6 bar

Condition: as good as new (ex-display), Year of construction: 2023, power: 5.5 kW (7.48 HP), cutting height (max.): 2,110 mm, saw blade diameter: 300 mm, cutting length (max.): 4,300 mm, cutting depth: 80 mm, Equipment: scorer, Holz-Her vertical panel saw with TRK extraction system Type SECTOR 1262 automatic Cutting height 2200 x cutting length 4300 mm, cutting depth 80 mm Motor power: 5.5 kW Automatic saw feed for vertical and horizontal cutting, infinitely variable from 6-25 m/min. incl. the following accessories: - CE extraction unit - Pneumatic aluminum sliding grid - center workpiece support - longitudinal stop with digital dimension display Pedpotwpgmsfx Ahyepr - strip stop - digital dimension display for horizontal cut on the control panel - 3 adjustable stop points in the saw beam - SuperCut scoring device incl. 2 WPL knives - Narrow parts unit (2 pieces)