Used Holz Her Sprint 1417 for sale (163)

Condition: used, Used machine Condition: consistent with age, suitable only for rough cutting Kledpfxjwka Ngo Ah Nol Technical data: - Cutting length approx. 5300 mm - Cutting height approx. 2200 mm - Cutting depth approx. 80 mm - Maximum saw blade diameter: 300 mm - Motor power: 4 kW Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 2015, functionality: unexamined, workpiece width (max.): 920 mm, rotational speed (min.): 1,000 rpm, rotational speed (max.): 18,000 rpm, number of slots in tool magazine: 6, tool diameter: 80 mm, Equipment: rotational speed infinitely variable, Holz-Her EVOLUTION 7405 4mat (Customer machine / Brokerage offer) - Milling spindle 7.5 kW - Campus NC-Hops V6 software - Hand scanner - Vacuum pump 8 m³/h - Workpiece length measurement (laser) TECHNICAL SPECIFICATIONS Workpiece size: X = 200 - 3200 mm (longer with additional support) Y = 70 - 920 mm Kledpox I A Elofx Ah Nel Material thickness: Z = 8 to 70 mm Max. travel distance in X-direction without reclamping: X = 1500 mm Z stroke: Z = 240 mm Maximum programmable speed: Vector speed: 68 m/min X = 25 m/min, Y = 60 m/min, Z = 20 m/min Machine can be refurbished by us (the manufacturer), as well as dismantled, installed and operators trained. No warranty / guarantee from the manufacturer, as this is a brokerage offer!

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, cutting length (max.): 4,300 mm, cutting width (max.): 4,250 mm, Holz-Her pressure beam saw ZENTREX 6215 Power, with storage connection Cutting length: 4300 mm Cutting width: 4250 mm Saw blade projection: 115 mm Main motor: 15 kW, scoring unit: 2.2 kW Mobile support tables Clean Protection & Dust Control extraction package Laser indicator – strip width detection Kledpfx Ahjx Id U Ij Nel Intelligent workpiece clamps Switchable clamp pressure Cutting gap closure system Handheld control device Label printer Software and more...

Condition: good (used), Year of construction: 2002, functionality: fully functional, Edgebander HOLZHER, type 1310, equipped with: cartridge glue station, flush end trimming, two multi-milling units, profile scraper, buffing units, condition good Ksdpfx Aox H Sutsh Nsll

Condition: used, Year of construction: 2014, Feed direction of the panel: to the right from the operator Maximum edge thickness: 3 mm Minimum workpiece thickness: 8 mm Maximum workpiece thickness: 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Feed speed: 10 m/min Jointing unit: Yes, with 2 milling units Jointing tool: Diamond cutters Diameter: 70 mm Height: 48 mm Infeed fence adjustment: manual Chopping shear up to: 3 mm Single edge feeding: possible Gluing: GlueJet PU gluing: possible Cross-cut saw: Yes Combination unit for flush/bevel/radius: pneumatically adjustable Corner rounding unit: pneumatically adjustable Profile scraper: yes Klodpjw R Hirefx Ah Nol Flat scraper: yes Aggregate display: on the display Control type: via limit switches Operation: Control panel with buttons Transport device: No Extendable roller support: Yes Protective hood: Yes Working height or feed table height: 874 mm Weight approx.: 1400 kg Extraction diameter: 160 mm Storage location:

Condition: used, Year of construction: 1987, total height: 2,600 mm, total length: 4,300 mm, total width: 1,350 mm, Weight: 1.250 kg Kledpfx Ahsw Rm Ino Nol - Year: 1987 - Documentation available: No - CE certificate present: No - Serial number: 1454/8- 75 - Max. cutting height vertical [mm]: 1900 - Max. cutting width [mm]: 3300 - Min. saw blade diameter [mm]: 100 - Horizontal cutting: Yes - Vertical cutting: Yes - Transport dimensions: 4300mm x 1350mm x 2600mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2003, total height: 2,900 mm, total length: 5,100 mm, total width: 1,700 mm, Weight: 650 kg - Year: 2003 - Documentation available: No - CE certificate present: No - Serial number: 633/0-306 - Max. cutting height vertical [mm]: 2200 Kedpfx Ahjxbhmlo Njll - Max. cutting width [mm]: 4300 - Min. saw blade diameter [mm]: 240 - Max. saw blade diameter [mm]: 250 - Arbor saw blade diameter [mm]: 30 - Horizontal cutting: Yes - Vertical cutting: Yes - Transport dimensions: 5100mm x 1700mm x 2900mm (l x w x h) - Transport weight [kg]: 650kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Condition: Guides slightly worn, only suitable for rough cutting Equipment and technical data: - Cutting length: 4300 mm - Max. passage height: 2200 mm - Max. trimming height: 2100 mm - Max. scoring height vertical: 2100 mm - Cutting depth: 80 mm - Motor: 5.5 kW - Saw blade speed: 4500 rpm - Saw blade diameter: 300 mm - Extraction: 2 x 100 mm - Compressed air consumption: 60 NL/min Ksdpfx Ahowqifkj Nsll Dimensions: 5620 x 1480 x 2990 mm Availability: short-term Storage location: Flörsheim

Condition: used, Holz Her UNO 1303 + PU Edge thickness 0.4 -3 mm (6 mm) Control panel with selector switches for setting the units Fully automatic edge magazine for rolls and strips Adhesive application station: cartridges + PU gluing Workpiece height 6-55 mm Pneumatic pressure unit Cutting unit for rolls and strips up to 3 mm (6 mm) edge thickness with adjustment of 0-10° angle of the cutting saws Klodpexlz Nzofx Ah Nol Milling unit, flush milling, radius milling, bevel milling - 15° Scraping unit for bevels and radii Surface scraping unit - finish Machine is CHECKED in TOP CONDITION from a very well-maintained craft business from the Lieboch warehouse

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, CNC machining center HOLZ-HER DYNESTIC 7507 Year of production: 2017 Technical condition: very good Technical data: - 3-axis machine - Table dimensions: 4600 × 2200 mm - 8-position tool changer - Drilling head with 10 vertical and 6 horizontal drill bits - 3 vacuum pumps - Multi-zone table (Multizone) - Labelling unit - External reference stops Kjdox Haa Dopfx Ah Njll

Condition: excellent (used), Year of construction: 2023, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, Holz-Her Edge Banding Machine LUMINA 1380 Multi PUR & EVA adhesive (up to 60 mm) + NIR unit / laser edges up to 45 mm, as interchangeable station Jointing milling Klodpex E A Dijfx Ah Nel IntelliSet - tool correction fa.s.t. - setup in the gap iTronic - pressure and glue quantity control Fully motorized equipment for all units Multi-function milling - radius 1.3 mm (2x) & 2 mm (2x) Spraying devices and more... The machine is currently being refurbished at the factory in Voitsberg, Austria.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, workpiece length (max.): 4,600 mm, workpiece width (max.): 2,200 mm, workpiece height (max.): 250 mm, Equipment: rotational speed infinitely variable, Holz-Her 5-Axis Nesting Machining Center DYNESTIC 7535 Working area: 4600 x 2200 mm. Vector speed: 128.0 m/min. The routing spindle delivers 13.0 kW (S6) and accepts tools up to a maximum diameter of 350 mm via an HSK interface. Drilling unit with 24 spindles, including 18 vertical and 6 horizontal. Maximum drilling diameter: 35 mm. For grooving, the drilling head is equipped with an integrated saw unit for a saw blade with up to 125 mm diameter and a maximum width of 4 mm. 18-position rotary tool changer, pneumatically liftable, with protective cover for the HSK 63F tool holders, as well as a single Pick-Up changer for saw blades up to 350 mm diameter. Pneumatically retractable stops integrated in the table, for special machining operations on the nesting table or with vacuum pods. 750 m³/h vacuum capacity, provided by two pumps (500 m³/h and 250 m³/h respectively), smartly controlled via ECO-VAC software. To concentrate vacuum power, the table features a 16-zone vacuum system. Kodex E Ah Ijpfx Ah Nell The pre-installed discharge unit is connected to the extraction system and can clean the panels and/or the nesting table.

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, workpiece length (max.): 4,580 mm, workpiece width (max.): 1,650 mm, workpiece height (max.): 300 mm, tool diameter: 350 mm, Equipment: rotational speed infinitely variable, Machining Center 7235, Demo Machine Working area: 4580 x 1650 mm – maximum workpiece size for milling around the edges, minus the cutter radius. A maximum panel width of 1,660 mm can be placed, with a maximum workpiece height of 300 mm. Simple and fast vacuum cup positioning with the Holz-Her VI.SE LED table. The differently colored LEDs indicate the position of the consoles & vacuum cups, including rotation angle for rotatable cups. 8 consoles, each with 2 cups per console and electronic stop monitoring. The routing spindle delivers 13.0 kW of power and accommodates milling tools up to 200 mm diameter via HSK interface, as well as saw blades up to 350 mm. Ideally suited for heavy-duty machining tasks, such as solid wood processing. 35 drilling spindles in total, with 25 vertical and 10 horizontal. Two saw units in X and Y, for saw blades up to 125 x 4 mm. 24-position rotary tool changer and 14-position pick-up tool changer, as well as a single-slot saw blade magazine for 350 mm blades, provide maximum flexibility for tool setup. Safe Detect – safety monitoring system instead of foot mats or light curtains. Kodpfx Aox E Afmjh Noll Integrated waste conveyor belt within the machine frame. And many other features.

Condition: excellent (used), functionality: fully functional, saw drive: 3,000 W, Holz-her 1220 automatic vertical panel saw. Multiple adjustment options, capable of cutting half or full sheets. Can be tested, operates well. Klsdpfx Aox Eyqyoh Nsl

Condition: used, Year of construction: 2015, functionality: fully functional, total length: 7,920 mm, workpiece height (max.): 60 mm, warranty duration: 3 months, HOLZ-HER Edgebander ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15mm. Simple program changeover and tool adjustment via the 18.5" touch control panel. Short heating time for the GlueJet adhesive system of approx. 2 to 3 minutes, depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet application system and glue cartridges. Changing PUR adhesive and cleaning the system is quick and easy within a few minutes. Axis adjustment via high-precision, repeatable servo motors. Special configuration for materials with protective film, such as high-gloss and supermatt surfaces! One of the true highlights of this machine is the multifunction package, which shows its strengths in companies processing a wide variety of edges. The DIA tools are constructed in multiple stages and can switch between radii and bevels as needed – from the longitudinal milling unit to corner copying and the profile scraper. The pull-out workpiece support and the extended infeed area facilitate processing of large workpieces, and a guide system assists in feeding small parts into the machine. Edging thickness (coil material): 0.4 – 3 mm (depending on material) Edging thickness (strips): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet in EVA and PUR, with minimal effort required. All common edge types, including high-gloss, supermatt, and solid wood edges up to 15mm. iTronic – pressure and glue quantity control Prepared for connection to a RETURN system Motorized pressure bridge with upper belt drive Multifunction units for rapid changeover between radius, flush, and bevel processing Vertical & horizontal spray systems Kedpfxox Emf De Ah Noll and much more.

Condition: new, Year of construction: 2019, functionality: fully functional, I am offering a new, originally packaged saw for sale. Klodpfowxr Dxsx Ah Nel

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical data: Cutting length 5300 mm Cutting height 2200 mm Max. workpiece thickness 80 mm Motor 5.5 kW Compressed air connection 6 bar, 50 NL/min Extraction connection 2 x 100 mm, 1200 m³/h Pneumatic unit lock Pneumatic immersion of the unit Kjdpoxymd Hofx Ah Nsll Digital horizontal display Availability: by arrangement Location: Hochheim

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: Well-maintained (ready for demonstration at customer site) Equipment and technical specifications: Console machine Working size X: 3,200 mm Working size Y: 1,470 mm Max. travel height Z: 325 mm Milling unit 7939, 6 kW (S6) Including laser pointer Including traveling disc tool changer 7996 with 18 positions Including stationary tool changer on the right side Including 7893 magazine for manual tool change position 8 consoles including 12 vacuum suction cups for 4-field machining 4 pneumatically raisable and lowerable loading aids Including hand control unit Including 3-field safety tread mats Including saw unit for sawing/grooving in X Including C axis 7997 Horizontal drilling units: 6 Vertical drilling units: 16 Double drilling spindle in X Heat exchanger for control cabinet cooling CAMPUS software for CNC machining centers Vacuum pump 100 m³/h Weight: approx. 4,450 kg The tools shown in the tool changer are not included in the scope of delivery! Availability: by arrangement Klsdjxymfkopfx Ah Nsl Location: Rhineland-Palatinate

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and Technical Data: - For classic nesting processing with wear plate - Machine frame of welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry-type traveling column - Helical rack and pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Max. support area on nesting table: X = 3100 mm, Y = 1560 mm - Max. traverse paths: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW Ksdpswka Upefx Ah Noll - 13 vertical spindles: - Individually selectable - Arranged in U-shape - 5+4 in X direction, 4 in Y direction - 32 mm spacing - Max. drill diameter: 35 mm - Total drill length: 70 mm from screw-on end (depending on panel thickness) - Spindle stroke: 70 mm - Rotational direction: alternating clockwise/counterclockwise - Speed (max): 1000 - 4400 rpm, infinitely variable - Tool holder: M10 thread, 11 mm fit - Without tool, without holder - 6 horizontal spindles: - 2 double drill spindles in X direction - 1 double drill spindle in Y direction - Tool holder: M10 thread, 11 mm fit - Max. total drill length: 63 mm from screw-on end - Without tool, without holder - Milling unit 7842: - Power: 12.0 kW (S6) - Max. speed = 1000 - 24,000 rpm, infinitely variable - Max. power at 12,000 to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck for HSK shank - Ceramic ball bearings (hybrid bearings) - Tool weight max. 6 kg (incl. holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety enclosure according to CE standard - Side and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Personnel safety ensured by light barriers in the front machine area - Hand-held control device for remote operation of the machine with the following functions: - Start/stop of the processing program - Control of processing cycle speed - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional sealing against dust via pressurization in each guide carriage

Condition: ready for operation (used), Year of construction: 2007, Brand: Holz Her Model: PRO-MASTER 7123K Serial no: 527/0-705 5010147 Year of manufacture: 2007 - 2 HSK cones included + various drills for drill box - Comes with a number of suction cups and some spare parts Tech. info: 4-axis (c-axis) 6 beams Motor-controlled adjustment of beams Number of vertical boring bits: 24 Number of vertical boring bits in X axis: 10 Number of vertical boring bits in Y axis: 8 Centres distance: 32 mm Horizontal double spindle in X axis: 2 Horizontal double spindle in Y axis: 1 Centres distance: 64 mm Kedpfx Asrz Irroh Nsll Working area: 3200x1260 mm Maximum travel path: X= 3866 mm Y= 1650 mm Z= 325 mm Workpeice pass height for tool change spindle with HSK 63F tool connection: 345 mm Max. machining thickness/ feed-in height (rear stop): 175 mm Max. workpiece size for vertical bores: X=3730R/ 3460L mm Y=1570 mm Max. workpiece size for horizontal bores X: X=3450R/ 3370L mm Y= 1315 mm Max. workpiece size for horizontal bores Y: X=4760R/ 3300L mm Y= 1385 mm Max. workpiece size for edge milling, less cutter radius (tool 25 mmdiameter x 125 mm, HSK): X=3510R/ 3525L mm Y=1445 mm Z=280 mm Max. workpiece size for grooving in X (dim. centre grooving tool approx. 120 mm): X=3300R/ 3760L mm Y=1585 mm Max. workpiece size for grooving in Y (dim. centre grooving tool approx. 120 mm): X=3200R/3860L mm Y=1485 mm Max. travel speed X axis: 100 m/min Max. travel speed Y axis: 100 m/min Max. travel speed Z axis: 25 m/min Max. travel speed C axis: 60 m/min Motor power of boring unit: 3 kW Motor power of saw: 1,5 kW Motor power of electro spindle unit with clamping system: 6 kW Speed electro spindle 1000-18000rpm Power: 22 kW, 50 Hz, 400 V, 3-phase Compressed air: operating pressure 6,0 bar permissible limit pressure 8,0 bar Air requirement: 300 l/min Extraction capacity: approx. 5300 m3/h Dust nozzle diameter: 250 mm Size: Length with control cabinet: 6420 mm Overall width: 3760 mm Height with extractor hood: 2475 mm Weight: 4200 kg Program Campus NC-HOPS Operating system Microsoft Windows Graphic variants system with HOP and CAD/CAM properties For the creation of parts variants with macro technology Program operation Windows-conform surface configuration and operator guidance Macro / variant programming Indication and simulation modes Export and import facility to the various branch programs Interaction possibilities with a variety of branch programs Stock no: 2002061BXA with reservation for incorrectly presented technical data

Condition: excellent (used), Year of construction: 2012, operating hours: 500 h, functionality: fully functional, Holzher Uno 1302 , Year 2012 , Flat scrapers , Kodpexz Icgsfx Ah Noll Fully functional , Can be tested ,

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Condition: Function tested Equipment and technical data: Milling unit: 4.4 kW Tool holder: HSK 63 F Speed: 1,000 - 18,000 rpm Water-cooled Tool changer: 4-position, lateral Drilling head: 9 vertical drilling spindles on a 32 mm pitch Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X-direction Control: Twin CAM 32 Vacuum pump: 40 cbm/h Including vacuum suction cups Travel paths: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Weight: approx. 3,500 kg The machine is completely checked for all mechanical, electrical, and electronic components and overhauled where necessary. Kedsw I Ug Hspfx Ah Nsll All guides checked; console guides replaced New PC control system for the TWIN CAM control All axis modules checked and serviced Location: Flörsheim Availability: by arrangement

Condition: used, Holz Her STREAMER 1054 FÜ + PU Edge thickness 0.4 - 6 mm Modern control with selector switch for adjusting the units Pre-milling unit for attaching before the gluing part Fully automatic edge magazine for rolls and strips Glue application station GLU-JET cartridges + PU gluing Glue application using nozzle technology Workpiece height 6-60 mm Automatic glue height adjustment Kedpfx Asxu E Nwjh Nsll High-quality 3-roller printing unit, 1st roller motorized Cutting unit pneumatic. for rolls and strips up to 6 mm edge thickness with pneumatic adjustment of 0-10° bevel of the mitre saws pneumatic milling unit, flush milling 6 mm, radius milling - chamfer milling - 15°, pneumatic via control panel scraper unit for chamfers and radii with 2 scraper holders pneumatic engagement and disengagement surface scraper unit - finish spraying device - PU machine is WORKSHOP REFURBISHED in TOP CONDITION

Condition: used, Year of construction: 2007, Used machine Year of manufacture: 2007 Equipment and technical data: Nesting system with grid table Processing dimensions: - X: 5000 mm - Y: 1240 mm - Z: 135 mm Traverse paths: - X: 5665 mm - Y: 1650 mm - Z: 325 mm with milling unit 7933: - Motor 11 kW (S6) - HSK 63 - water-cooled with C-axis with 18-position disc tool changer with vacuum pump 250 m³ with handheld control device with central lubrication Kodpfx Aowka Ipjh Nell with minimum quantity lubrication system Availability: short-term Location: Röllbach

Condition: excellent (used), Horizontal milling machine Spindle diameter: 40 mm Spindle length: 220 mm Maximum spindle diameter: 250 mm Ksdsw N Ryrspfx Ah Njll