Used High Z S 1000 for sale (88,605)

Condition: new, Siemens 1FT5044-0AF01-1-Z permanent magnet motor, Z= see nameplate, SN:EF593898710001, unused in opened original packaging, 100% functional, scope of delivery as per photos Nljdpoi D R A Tjfx Afasa

Condition: ready for operation (used), Siemens 1PH7184-7NL230AJ0-Z motor SN: N-V21194793010001 with Ziehl-Abegg RF22P-2DK.3F.5R axial fan, used, in good condition, 100% functional, delivery as shown in the photos. ATTENTION: Please enquire separately for packaging and shipping costs! See nameplate for details. Nedpfsx Dv Dqox Afasla

Condition: used, Year of construction: 2014, x-travel 550 mm Nodpfx Afetycrneajla y-travel 320 mm z-travel 420 mm

Condition: used, first registration: 10/2011, Year of construction: 2011, M&V 902 Container Chassis High Cube Extendable ● ABS ● Air suspension ● Lift axle ● Raise/lower system ● 3 x SAF axles with disc brakes ● Tyres: 385/55 R 22.5 ● Container mounts: 20 ft / 2 x 20 ft / 1 x 30 ft / 1 x 40 ft ● Gross weight: 39,000 kg ● Unladen weight: 6,300 kg ● Payload: 32,700 kg !! Extendable at rear and in the middle !! - German semi-trailer - TÜV / MOT: New on request and at extra cost! Subject to errors and prior sale! Nsdpfx Afsx Nc D Dsajla = Further information = Please contact Joannis Arpantzanis or Kai Bühler for further details.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, spindle bore: 80 mm, turning length: 1,000 mm, turning diameter: 430 mm, swing diameter over bed slide: 430 mm, spindle speed (max.): 3,600 rpm, TECHNICAL DETAILS Machining Area Turning diameter: 430 mm Turning length: 1,000 mm Swing diameter over bed: 430 mm Swing diameter over carriage: 220 mm Spindle bore: 80 mm Quill taper: 5 MT Spindle and Feeds Speed: 1 – 3,600 rpm Rapid traverse: 10/7 m/min Stepless feed: 0 – 5,000 mm/rev Control: Heidenhain MPlus 620 HSCI MACHINE DETAILS Electrical Data Njdpow A Rp Uofx Afaola Drive power: 16 kW Total power requirement: 16.5 kW Dimensions & Weight Dimensions: 2,800 x 2,100 x 1,900 mm Weight: 3,300 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 425 mm, TECHNICAL DETAILS Control: Sinumerik Njdpfx Afewtravjaola X travel: 550 mm Y travel: 300 mm Z travel: 425 mm Rapid traverse: 30 m/min Spindle mount: ISO SK 40

Condition: used, Year of construction: 1975, workpiece diameter 8-125 mm grinding depth 130 mm clamping length 50-1100 mm max. workpiece diameter 0 mm min. workpiece diameter 0 mm workpiece length mm total power requirement 1 kW weight of the machine ca. 500 kg dimensions of the machine ca. m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 1000 Year approx. 1975 Serial No. J 1400 _____ Distance between centres 50 – 1,100 mm Height of centres 145 mm Workpiece Ø 8 – 125 mm Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice 4 – 150 mm Stroke of grinding head 130 mm Stroke of grinding tool on workpiece 0.75 – 5 mm Grinding tool Ø 15 – 60 mm Grinding spindle speeds 13,000 – 45,000 rpm Workpiece drive 0 rpm Total electrical load, approx. 0.5 kW - 380 V - 50 Hz Weight, approx. 500 kg Accessories / Special Features: * A cone shaped grinding wheel is employed, but it is only in line contact with the centrehole surface, in addition it is reciprocating simultaneously along this line. * The workpiece remains stationary, enabling the procuction of perfect centre holes. * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw chuck which gives three point contact and always coincides with the center of the grinding spindle. * Height-adjustable workpiece centering tool with carbide inserts. Manual adjustment of appropriate workpiece diameter with a rachet coupling. Njdjt Hwuvjpfx Afasla * Manual dressing device, mounted on the side of the grinding spindle, stroke approx. 40 mm, for producing a geometrically exact conical form. * Pre-centering device for Workpiece only partially available. * Height-adjustable tailstock and bore in machine base allow longer workpieces. Condition : average to good/should be reconditioned. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: excellent (used), Year of construction: 2017, SIEMENS 840D SL control Nlodpfxewwundj Afaea Working travels 550 x 320 x 420 mm Milling head swivellling +100 / -10 ° Spindle taper HSK A50 Spindle speeds -12'000 rpm Tool changer with 64 Pos. Turning spindle 4'500 rpm NC swivel rotary table with B- + C-axis Tool breakage control system Tool lenght measuring device 3D-measuring tracer Misc. accessories MARCELS MASCHINEN CH

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, infeed width: 720 mm, Placing a bid obligates the buyer to collect the equipment on time, no later than 31/12/2025! The offer includes: - MBO R 700 Feeder (Serial no.: 0722420, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1543, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1544, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1545, Year: 2002) - MBO SBAP-46-ME Vertical Delivery (Serial no.: 90020602, Year: 2002) - H+H 148/2 Transfer Unit (Serial no.: 820-411, Year: 2002) - Bickel SGU Die Cutter (Serial no.: 033, Year: 1997) - MBO 3-Up Delivery for SAP 66-ME (Serial no.: 910913362) - Polar L-1000-W-3 Pallet Lift Table (Serial no.: 6072421) TECHNICAL DETAILS Fold Plates Fold plates 1st folding unit: 6 (individually driven, removable sheet transfer) Fold plates 2nd folding unit: 6 Fold plates 3rd folding unit: 2 Nljdjxyhnyopfx Afasa Infeed Width Infeed width 1st folding unit: 720 mm Infeed width 2nd folding unit: 720 mm Infeed width 3rd folding unit: 520 mm This machine comes with a gate fold plate (usable in units 1 and 2), as well as 2 separate sheet diverters and 1 auxiliary frame for setup. Units 2 and 3 are electrically height adjustable! Note: The MBO delivery unit is defective.

Condition: used, mileage: 130,934 km, power: 96 kW (130.52 HP), fuel type: diesel, empty load weight: 2,494 kg, overall weight: 3,500 kg, color: white, Equipment: ABS, air conditioning, airbag, onboard computer, Special features Nlodpfx Afjwg A Tmjaea - 6 seats - Airbag - Air conditioning - ABS - Radio - Central locking with remote control - Immobilizer - Electric windows Body Rear tipper: - Body dimensions: 3.2m x 1.8m Renault Maxity with tipper body. Thanks to its total length of 5.95 m, it is perfectly suited for maneuvering in urban areas. Moreover, due to its lightweight body, it boasts a payload capacity of 1000 kg! New TÜV (vehicle inspection) ACR-Juretzki Commercial Vehicle Trading Ltd. – Your reliable partner for used commercial vehicles All vehicles offered by us are owned by ACR-Juretzki Nutzfahrzeughandels GmbH. Presentation is done exclusively with original photos taken directly at our facility – this guarantees full transparency regarding the actual condition of the vehicle. Our vehicles undergo a comprehensive reconditioning process in our own specialized workshop before being sold – including mechanics, bodywork and paint. They are optimally prepared for the next technical inspection. We also guarantee the authenticity of the specified mileage. Trust is good – control is better: On request, the vehicle can be inspected by independent organizations such as TÜV, DEKRA, or KÜS – also as part of a remote inspection. Our services for you: Delivery of your vehicle to your desired location Complete handling of export formalities, including export license plates Tailored financing and leasing offers Trade-in of your current vehicle Installation of special equipment as desired Looking for something specific? If you currently do not find a suitable vehicle for your business in our stock, please contact us – we are happy to help. For technical details, more photos, or a personal consultation, we are always available to assist you. All stated prices are net prices. The contents of our website have been created with the greatest care and are regularly updated. However, they serve solely for general information and do not replace individual advice. Only the information in the purchase contract is binding. Subject to change, errors, typos, and prior sale.

Condition: used, 2012 De Gouwe Jacketed Stainless Steel Buffer Tank Jacketed Stainless Steel Year 2012 Nsdpswq Slaofx Afaola With ancillary equipment

Year of construction: 1995, condition: used, machine/vehicle number: 18891, Force: 10 to. Nsdpfx Afobrcmkeajla Stroke: 1000mm 3 Broaching-stations With chip-conveyor + platform and safety door

Year of construction: 1971, condition: used, machine/vehicle number: 51, Color: yellow Nledobrclzepfx Afaea Force: 6,3 to Stroke: 1000 mm Weight: 3.300kg

Condition: good (used), functionality: fully functional, machine/vehicle number: 100/6349, Year of construction: 1999, operating hours: 398 h, Faba EG-S 1000 Pallet stacker, year of manufacture 1999 with a Standard mast Details: Faba EG-S 1000 Year of manufacture: 1999 Work hours (h): 398 Mast type: Standard Lift height (mm): 3000 Freelift (mm): 0 Build height (mm): 1970 Initial lift: No Lift capacity (kg): 1000 Fork length (mm): 1150 Weight (kg): 617 Njdpfoy E Hnlox Afajla Front wheels: Polyurethane Rear wheels: Polyurethane Battery YOM: 2023 Battery capacity (Ah): 110 Battery voltage (V): 24 (2 x 12 V) Accessories: Internal charger.

Condition: new, functionality: fully functional, turning diameter over cross slide: 330 mm, spindle bore: 78 mm, turning diameter over bed slide: 520 mm, center height: 260 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,160 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,810 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Centre height: 260 mm Centre distance: 1000 mm Spindle bore: 78 mm Spindle nose according to DIN 55029 Camlock D8 Spindle speed range: 20-2000 rpm Drive power: 7.5 kW Features include: Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surfaces) for tool and cross slide Manual central lubrication with a pump for longitudinal and cross slide Complete coolant system with rear splash guard plate and splash guard on the slide Chuck guard Shifting rod with 3 adjustable cams Machine light Fixed centre Set of machine levelling plates Nlodpfx Ajh Rvxhsfaoa

Condition: new, functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 58 mm, turning diameter over bed slide: 470 mm, center height: 235 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,150 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,800 kg, quill mount: MK 4, Tip height: 235 mm Center distance: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 mm Features include Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Nsdpfxecirnie Afaola Set of machine mounting plates

Condition: used, Year of construction: 2014, machine/vehicle number: 1995880, This Joos hydraulic press, model: HP S 1000/OK, is being auctioned online in our industrial/machinery auction due to the closure of the ContiTech Transportsysteme location. Nledpeyz Siyefx Afaoa

Condition: used, Year of construction: 2023, Spraying machine KaMa, KR BM 1000 B, Nljdpfx Afeumvnhsaja The spraying machine is a demonstration model from a trade fair. It was only used for test and demonstration purposes. The machine is ready for painting and is already equipped with1 Bings Marple 8/25 high-pressure pump (up to 175 bar)and 4 Sames-Kremlin AVX Airmix spray guns. The machine is fitted with a changeover valve for quick paint changes, a lever switchable toa maximum of 3 paint circuits and 1 flushing agent pump (options) The machine is in an explosion-proof version. Machine is ready for demonstration at the warehouse in Blomberg. - Producer Ka-Ma - Type KR BM 1000 B - Year of construction 2023 - Working width 1.200 mm - Single gun drive system - Dry filter system - Transport belttransport System - Feed speed adjustable 2 - 8 m/min - Lacquer reclaiming system with v-belt - Gun control system SPS, LS - Number of installed lacquer circles 3 Stk. - Number of installed spraying guns 4 Stk. - quick change system for spraying guns - spray gun type Krautzberger KAA1300, Airless - Airless spraying system - Height adjustment for spraying guns 150 mm - Producer lacquer pump Binks Maple 8/25 bis max. 175bar - Supply air box - Suitably for water based lacquer - Length 3243 mm - Width 3482 mm - Height 2450 mm - Voltage / HZ 400 / 50 - Colour 7035, lichtgrau - Weight 3.100 kg _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 2124, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,375 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 4,000 rpm, 5-axis machine Njdpfx Afoyzxyxoaela Pallet size: 800 × 800 mm Automatic workpiece change: 5 pallets CNC control: FANUC 15M Spindle: 22 kW – 4000 rpm, FANUC Axis motor (20 m/min) + drive: FANUC Tool magazine: 118 tools, type 50, DIN 69871

Condition: used, Year of construction: 1990, functionality: fully functional, turning length: 1,000 mm, turning diameter: 500 mm, spindle speed (max.): 2,500 rpm, spindle motor power: 37 W, torque: 1,450 Nm, chuck outer diameter: 315 mm, Equipment: documentation/manual, rotational speed infinitely variable, Voest Alpine Steinel Lathe WNC 500 S x 1000 Turning diameter: 500 mm Turning length: 1000 mm Control system: Sinumerik 810 T-GA 2 2-speed gearbox i = 4 Power: 37 kW at 100% duty cycle Max. turning torque: 1450 Nm Manual tailstock with clamping and coupling Max. speed: 2500 rpm Electronic handwheel Njdpoydfy Nefx Afaela For milling operations: hydraulically swiveling servomotor with 720 Nm and max. 18.5 rpm 12-position disc turret with live tooling, max. 3000 rpm at 4 kW Tool holder: VDI 40 Numerous tool holders VDI 40 for internal and external machining as well as live tooling, including some tools – e.g., internal turning tools – otherwise without tools!

Condition: new, The DURMA AD-S 601000 is a powerful hydraulic press brake that ensures the highest precision and efficiency in sheet metal processing. With a pressing force of 1000 tons and a working length of 6 meters, it is ideal for demanding applications, especially when processing large and thick materials. Technical details: - Model: DURMA AD-S 601000 - Pressing force: 1000 tons - Working length: 6 meters - Control: SKY22 (3D control) - Back stop: 6 axes (X1, X2, R1, R2, Z1, Z2) - Bending aid: AP3-AP4 integrated for optimized handling of heavy workpieces - Condition: As good as new, available immediately Nedpfx Aovwm A Iofaela Features and advantages: - High bending accuracy thanks to the latest CNC control - Robust construction for a long service life - Flexibility thanks to the 6-axis back stop control - Support for heavy and large sheets thanks to integrated bending aid The machine is available immediately and can be inspected on request. We are happy to provide you with further information or to arrange an appointment.

Condition: ready for operation (used), Year of construction: 1994, A Stiegler side weld bag-making machine in need of repair is available. Working width: 1000mm, film material: PE/PP, feed range: 80mm-600mm, max. clearance: 900mm, film width range: 200mm-1380mm, film thickness range: 0.025mm-0.085mm, output: 160cycles/min, max. C-fold triangle: 1380mm. Including bottom gusset device, hot stamping units, thermal transfer units, ribbon unwinding unit, unwinding station and various accessories. The control system of the line must be renewed. Documentation available. An on-site inspection is possible. Nsdpfsyx H H Uox Afasla

Condition: used, functionality: fully functional, Year of construction: 2010, working width: 2,000 mm, sheet thickness steel (max.): 2 mm, sheet thickness stainless steel (max.): 1 mm, sheet thickness aluminum (max.): 4 mm, overall weight: 2,030 kg, input voltage: 400 V, input current: 4 A, input frequency: 50 Hz, We are offering this used Schechtl MAX 200/CNC S-1000/1 folding machine, year of manufacture 2010. Year of manufacture: 2010 Model: MAX 200/CNC S-1000/1 Serial number: MA5726 Take advantage of this opportunity to acquire a high-quality folding machine from Schechtl. This powerful machine is ideal for anyone engaged in sheet metal processing who demands maximum precision and efficiency. Product details: - Model: Schechtl MAX 200/CNC S-Touch Nodpfx Asyxpc Esfaela - Year of manufacture: 2010 - Condition: Used - Technical specifications: Bending length: 2,000 mm Steel 2.5 mm Aluminium 4.0 mm Stainless steel 1.5 mm Weight: 2,030 kg If you have any questions or require further information, please feel free to contact us by message or phone. "The machine is sold according to Incoterms® 2020 EXW [Frankenweg 2, 9100 Völkermarkt]. From the time the machine is made available at the designated location, the buyer assumes all costs and risks, including loading, transportation, and customs formalities."

Condition: reconditioned (used), functionality: fully functional, working width: 410 mm, overall weight: 32 kg, warranty duration: 12 months, input voltage: 230 V, NUMATIC BMD 1000 S SINGLE DISC SCRUBBER The cleaning head is equipped with a new disc brush and a holder with a complete set of pads for use on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Motor: 1000 W Voltage: 230 V Rotation speed (RPM): 150 rpm Brush/pad working width: 410 mm Weight: 32 kg Dimensions (L x W x H): 580 x 450 x 1185 mm INCLUDED: NEW 410mm PPL 0.8 disc brush (hard) NEW 410mm pad holder NEW white pad - very soft (cleaning effect / surface polishing) NEW red pad - soft (cleaning effect / surface polishing) NEW blue pad: - medium (daily / standard surface cleaning) NEW green pad - hard (daily / standard surface cleaning) NEW brown pad - very hard (cleaning of very dirty surfaces) NEW black pad - aggressive (cleaning (for very dirty surfaces) TENZI NORMAL Fluid 5 liters - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. A small turning radius allows operation even in narrow passages and alleys. The large working width (410 mm) ensures high surface coverage. Nedpfoyxb Adox Afaela A clearly legible and intuitive control panel.

Condition: reconditioned (used), functionality: fully functional, working width: 410 mm, overall weight: 32 kg, warranty duration: 12 months, input voltage: 230 V, NUMATIC BMD 1000 S SINGLE DISC SCRUBBER The cleaning head is equipped with a new disc brush and a holder with a complete set of pads for use on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Motor: 1000 W Voltage: 230 V Rotation speed (RPM): 150 rpm Brush/pad working width: 410 mm Weight: 32 kg Dimensions (L x W x H): 580 x 450 x 1185 mm INCLUDED: NEW 410mm PPL 0.8 disc brush (hard) NEW 410mm pad holder NEW white pad - very soft (cleaning effect / surface polishing) NEW red pad - soft (cleaning effect / surface polishing) NEW blue pad: - medium (daily / standard surface cleaning) NEW green pad - hard (daily / standard surface cleaning) Nlsdpfoyw S Afjx Afaoa NEW brown pad - very hard (cleaning of very dirty surfaces) NEW black pad - aggressive (cleaning (for very dirty surfaces) TENZI NORMAL fluid 5 liters - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. A small turning radius allows operation even in narrow passages and alleys. The large working width (410 mm) ensures high surface coverage. A clearly legible and intuitive control panel.