Used High Pressure for sale (30,734)

Year of construction: 2020, operating hours: 0 h, condition: as good as new (ex-display), High-pressure cleaning device, high-pressure flushing device, high-pressure built-in flushing device on hot-dip galvanized and painted high-quality steel frame with fork-lift truck lugs suitable for installation in company vehicles. PTC Salmon similar but no Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/200 | 60l/min. at 200bar | Engine: Vanguard 35 HP 26kW Salmon 75/150 | 75l/min. at 150bar | Motor: Vanguard 35 HP 26kW Salmon 30/300 | 30l/min. at 300bar | Motor: Vanguard 35 HP 26kW Salmon 45/240 | 60l/min. at 200bar | Motor: Vanguard 35 HP 26kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 760x1.250x1.200 mm. Dimensions with 400l water tank LxWxH: approx. 1.220x1.250x1.200 mm Dimensions with 800l water tank LxWxH: approx. 1.670x1.250x1.200 mm Empty weight without water tank: approx. 300 kg Empty weight with 400l water tank: approx. 320 kg Empty weight with 800l water tank: approx. 350 kg HIGH PRESSURE PUMP: Manufacturer: HPP Model: CLW Flow rate: max. 60 or 75 l/min. Working pressure: max. 200 or 150 bar MOTOR: Manufacturer: Vanguard Model: 35 HP Fuel: Petrol Max power: 35 HP (26 kW) CONTROL PANEL: Start button Hour meter Electronic fuel gauge LED indicator for oil temperature LED indicator for low lubrication oil pressure LED indicator for clogged air filter LED-indicator for speed measurement LED-indicator for generator LED indicator for spark plugs Emergency stop button ELECTRICAL CONTROL [...] Kfedpfxef Arugs Affsa

Year of construction: 2013, condition: excellent (used), machine/vehicle number: B3.00122.2279, Stationary high pressure pump unit Hammelmann HDP 122 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 122 Working pressure: 440 bar Delivery rate: 92 l/min. Drive speed: 1500 rpm. Drive power: 75 kW with AC motors ACM 208S 75 kW electric motor, IP55, with pressure regulating valve, with safety valve, with oil cooling system. dimensions LxWxH: approx. 1.800x900x1.450 mm weight: approx. 1.230 kg year of construction: 2015 Condition: in very good used condition. Kfjdpehf Ixmjfx Affja

Year of construction: 2008, condition: excellent (used), Stationary high pressure pump unit Hammelmann HDP 127 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 127 Working pressure: 600 bar Delivery rate: 66 l/min. Drive speed: 1500 rpm. Driving power: 74 kW with SCHORCH KA7280S-BB01B-Z 3~ IP55 75kW electric motor, with pressure regulating valve, with safety valve, with oil cooling system. dimensions LxWxH: approx. 1.700x1.000x1.300 mm weight: approx. 1.300 kg Year of manufacture: 2008 Condition: In very good used condition. Kjdpfx Afjh Uc Iujfofa

Year of construction: 2020, operating hours: 0 h, condition: as good as new (ex-display), High-pressure cleaning device, high-pressure rinsing device, high-pressure rinsing device with suction device on hot-dip galvanized and painted high quality steel frames with forklift lugs. The following models are available: Vortex Combi 800 Sewer B - 800 l sludge tank - 2750 l/min. suction power - Petrol engines: for suction Honda GX390 8,8kW and for cleaning - Honda GX690 17,9kW Vortex Combi 1000 Sewer D - 1000 l sludge tank - 3600 l/min. suction power - Diesel engines: for vacuuming Yanmar L100 8,0kW and for cleaning Kohler KDW 1003 18,9kW high pressure pump 160 bar at 55 l/min. Manufacturer: COMET Model: TW Premium HIGH PRESSURE HOSE REEL: Type: manual hose reel Material: stainless steel Capacity: max. 50 m ½" High pressure hose Hose: 50 m ½" High pressure hose (Included) LOW PRESSURE WATER SUPPLY HOSE REEL: Type: manual hose reel Kfedpfofdkb Eox Affoa Material: stainless steel Capacity: max. 35 m ¾" Low pressure hose Hose: 35 m ¾" Low pressure hose (Included) FUEL TANK: Capacity: approx. 13 l WATER FILTER: With washable cartridge and drain valve Filtration degree: 50 mesh IN THE SCOPE OF DELIVERY: Multifunction radio remote control IMET; - On / Off Motor; - On / Off bypass; - Electrical speed control +/-; - Emergency stop button; Battery charger for radio remote control; 300 o. 500 l water tank made of polyethylene; OPTIONAL ON REQUEST: 60 m ½" High pressure hose; Pulsation/booster pump; ACCESSORIES ON REQUEST: Kit STORZ for the connection to the water hyd

Condition: excellent (used), Dr. Hönle Dr. Hönle UV Technology – Bluepoint LED High-Power + Bluepoint 2 easycure – Complete System incl. LED Spots & Manuals For sale is a complete UV curing system by Dr. Hönle, consisting of two control units and several LED spots. Ideal for professional applications in electronics manufacturing, medical technology, optics, plastics processing, and laboratory operations. Description: The system includes: - Bluepoint LED High-Power Control Unit (REF 45250.c) - Bluepoint 2 easycure Control Unit (REF 33900.a) - Several UV LED spots (e.g., 365 nm, air-cooled) - BP-LED 4-1 Adapter (REF 45970.a) – for controlling up to 4 spots - Original operating manuals + CD The units enable precise control of exposure time, intensity, and energy – ideal for reproducible industrial UV curing processes. Technical Data: Bluepoint LED High-Power (45250.c): - Power supply: 36 V / 5.5 A - Control for up to 4 LED spots - Adjustable UV intensity - Timing programs and energy measurement Bluepoint 2 easycure (33900.a): Kfodpfxox E T Uxj Affja - 230 V AC, 50 Hz - 570 VA power consumption - High-performance LED control - Industrial quality, Made in Germany Total Dimensions/Weight: approx. 12–15 kg Important Note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) - Bluepoint LED High-Power - Bluepoint 2 easycure - LED spots (air-cooled) - BP-LED 4-1 adapter - Operating manuals - CD - Original documentation (subject to changes and errors in technical data and information!) We are happy to answer further questions by phone.

Condition: used, Year of construction: 2013, total height: 2,220 mm, total length: 6,100 mm, total width: 2,350 mm, Weight: 6.000 kg Kfsdpfownhn Ejx Affoa Horizontal band saw machine High point HP-400 Year of construction 2013 Serial number 213-051 Saw wheel diameter 860 mm Maximum cutting width 400 mm Motor 22kW (30hp) (Per piece!) Conveyor belt in poor condition. - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: 213-051 - Transport dimensions: 6100mm x 2350mm x 2220mm (l x w x h) - Transport weight [kg]: 6000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), functionality: fully functional, load capacity: 750 kg, Equipment: foot remote control, APS welding rotary table DSE 750 kg Speed continuously variable from 0 - 1.7 rpm. Length 1250mm, width 1550mm, height 940mm Height from floor to center of hole min. 500mm, max. 780mm Diameter of clamping disc 600mm Hollow shaft or hole 110mm Kfedpev A Rppsfx Affja

Condition: used, Year of construction: 2017, operating hours: 49,000 h, functionality: fully functional, machine/vehicle number: 170015, Nitrogen generator model number Nitro -Gen 250. This generator is in operation and running 24 hours 5/6 days a week, it is in excellent condition and routinely serviced. It produces nitrogen gas at 99.5 to 99.9% purity with a flow rate of 40/55 M3/hour for packing food to MAP. requirements. Flow rate varies depending on the purity of Nitrogen required. It is estimated it will have a higher flow capacity than that quoted, but in it's present location is sufficient to supply our 4 production lines. There are also 2 buffer/storage tanks included as shown. In addition there is a 11Kw compressor that supplies the generator- if required. With the buffer tanks and compressor[if required] this is a complete working Nitrogen generation system. Operation & installation Manual available. Documents -PDF with rating of this 250 model relative to different purity level settings The machine is for sale only due to expansion of the business resulting in additional new production lines requiring higher capacity equipment. Kedpfxexbta Do Affefa

Condition: good (used), Mixing Tank, Mixer, Pressure Vessel, Heating Jacket, Chemical Industry, Used Equipment Kedpfx Astrdyrjffjfa Design: Cylindrical tank with shallow dished bottom and top, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. The tank lid is removable with a flanged bolt connection. The lid has a cleaning opening. Material Quality: Carbon steel with painted surface. Manufacturer: Robert Hinkel & Co Type: 9601 Volume: 200L Operating Pressure: 3 bar Electrical Data: 380V; 0.75kW; 2.0A

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. Kfodefz Dvvjpfx Affoa High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Kfedpfewz Ukyox Affea Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 213-051, cutting width (max.): 400 mm, wheel diameter: 860 mm, TECHNICAL DETAILS Saw blade type: Horizontal Kfedpfx Aoxmgq Toffja Saw wheel diameter: 860 mm Maximum cutting width: 400 mm MACHINE DETAILS Model: Hhepunkt HP-400 Year of manufacture: 2018 Serial number: 213-051 Motor power: 22 kW (30 HP) EQUIPMENT Conveyor belt (in poor condition)

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions Kfjdpfx Asfz Ax Ssffsa The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: new, functionality: fully functional, power: 3 kW (4.08 HP), Year of construction: 2025, Equipment: air conditioning, cooling unit, G16 Kodjwz Ufwepfx Affofa Type: Two chucks

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps Kfedpfx Aoflpmqjffja The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily Kjdpfxjfzrapj Affefa • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. Ksdpfxofz A D No Affefa The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: excellent (used), mileage: 251,394 km, power: 231 kW (314.07 HP), first registration: 09/2006, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,450 mm, fuel: diesel, gearing type: automatic, emission class: euro5, Year of construction: 2006, Equipment: air conditioning, crane, cruise control, = More options and accessories = - Aluminium fuel tank - Remote central locking - Speed limiter - Radio/CD player - Sunshade - Power take-off (PTO) - Power take-off (PTO) - Central lubrication = More information = Kodpfx Aow I T Trjffofa Front axle: Steered; Tire profile left: 50%; Tire profile right: 50% Rear axle 1: Tire profile left: 50%; Tire profile right: 50% Rear axle 2: Lift axle; Steered; Tire profile left: 50%; Tire profile right: 50% Crane: Fassi 195 19tm kraan, year of manufacture 2006, behind the cabin Pump: Yes Technical condition: very good Visual condition: very good Contact John de Koning for more information.

Condition: excellent (used), Year of construction: 2014, operating hours: 11,440 h, DMG 5 axis Simultaneous HSC 30 Linear Year 2014 Heidenhian TNC640 Control Kjdpfxew Hxiws Affsfa Travel X320 / Y 300 / Z280mm B axis +/- 120 degree C axis 360 x 0.001 degree HSK-E40, 40,000rpm Swivel rotary table Touch Probe BLUM Tool Measuring system 3D Quick Set Application Tuning Cycle Air Blast through spindle Super Fine filter system c/w tooling ----- Clearance Sales -----

Condition: used, Year of construction: 1997, Pressure total: 315 ton Ram stroke: 160 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 1.050 mm Free frontal opening L-R: 2.740 mm Free lateral opening F-B: 1.500 mm Distance between oil tray: 2.400 mm Table surface area : 2.740 x 1.800 mm Slide area: 2.400 x 1.700 mm Number of strokes: 10 - 60 s.p.m. Required power: 75,5 kW kW Working hours machine: 77.341 h Height over floor approx.: 5.500 mm Dimensions L x W x H: 5.400 x 3.300 x 5.700 mm Weight of machine approx.: 80 ton Control: Siemens S5 Standard configuration hydraulic tool clamping device Kfodpfovmfzhex Affsa Extended machine accessories Tool changing cart

Condition: used, Press capacity: 50 ton Ram stroke adjustable: 16 - 51 mm Slide adjustment: 78 mm Shut height (stroke down, adjustment up): 300 mm Table surface area : 930 x 590 mm Number of strokes: 620 - 1.120 s.p.m. Required power: 40 kW Dimensions L x W x H: 3.900 x 1.400 x 3.065 Kfsdpjw Hg S Tofx Affoa Weight of machine approx.: 9 ton

Condition: used, Year of construction: 1997, machine/vehicle number: 150069, Press capacity: 125 ton Ram stroke adjustable: 30 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 450 mm Free frontal opening L-R: 1.290 mm Free lateral opening F-B: 450 mm Table surface area : 1.250 x 800 mm Slide area: 1.250 x 650 mm Hole in table: 1.050 x 260 mm Number of strokes: 30 - 220 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 3.800 mm Dimensions L x W x H: 3.500 x 2.200 x 3.800 mm Weight of machine approx.: 21,5 ton Standard configuration electrical overload protectionpneumatic clutch2 connecting rodsPLC Siemens S5 Extended machine accessories Strip shear AI 40max. shear force 10tSheet thickness max. 4 mmSheet width max. 400 mmCross section 600 mm2 Kfsdpfx Asuqdhwsffoa Automation Kaiser Feeder KWV 400max. sheet width 400 mm

Condition: used, Year of construction: 1978, machine/vehicle number: 5042, Press capacity: 25 ton Ram stroke adjustable: 13 - 38 mm Slide adjustment: 51 mm Shut height (stroke down, adjustment up): 230 - 281 mm Max. die size: 430 x 360 mm Number of strokes: 100 - 1.500 s.p.m. Table surface area : 530 x 530 mm Required power: 18 kW Dimensions L x W x H: 2.075 x 1.355 x 2.620 mm Weight of machine approx.: 4,5 ton feeding speed: sheet width: 200 mm Extended machine accessories Press force measurement and tool locking Siegfried Kfedpeuqdxvjfx Affja Automation incl. Bruderer BBV 202 feeder

Condition: used, Year of construction: 1982, machine/vehicle number: 105981, Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7 Kfsdeuqc Ngjpfx Affea Standard configuration With gripper feedMachine was completely overhauled in 2001 with SIEMENS S7 control.

Condition: used, Year of construction: 2004, machine/vehicle number: 2177/03/9604014, Press capacity: 160 ton Ram stroke adjustable: 20 - 130 mm Slide adjustment: 100 mm Daylight: 560 mm Table surface area : 1500 x 800 mm Slide area: 1400 x 800 mm Number of strokes: 20 - 60 s.p.m. Distance between the columns F - B: 520 mm Height over floor approx.: 3550 mm Required power: 48 kW Weight of machine approx.: 26 ton Standard configuration Control system SIEMENS S7 Extended machine accessories Kfodpfsuqdzdsx Affea Automation PME feeding unit consisting of decoiler and feed / straightening unitDecoilerLoad capacity 2 tStrip width 400 mmMaterial thickness 0.5 - 4.5 mmCoil outer diameter 1800 mmSpreading range 470 - 630 mmHydraulic expansion of the spreadHydraulic pressure armElectronic feed / straightening unitMax. strip width 400 mmMax. material passage 410 mmMaterial thickness 0.5 - 4.5 mmCross-section 1200 mm²Number of straightening rollers 7Straightening roller diameter 80 mmNumber of feed rollers 2Pneumatic lifting of feed rollersFeed speed 50 m/minFeed length 0 - 10 m