High pressure washing part cleaner

Glogar HP25

Year of construction: 2012, condition: excellent (used), machine/vehicle number: MBHF-KBK1, DEMAG KBK crane sky crane track dimensions approx. 12m x 3.5m Please inquire about other dimensions! Payload / lifting load 125 KG - 0.125ton Rcedpfx Ahepiarnjgsf Technical data of the system: Crane track made from Demag KBK1 rails The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drag, power supply, holders/suspenders etc. including 1 bridge with 125KG Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please ask for your crane runway with cantilever capacity and dimensions.

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Rjdpfx Asul Svlshgscf Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Weight: 1050kg The machine is fully refurbished and tested.

Condition: used, Year of construction: 2013, operating hours: 14 h, functionality: limited functionality, machine/vehicle number: TJ-350-20/40 KPSI //TJ-160-20/40 KPSI, total width: 1,500 mm, total length: 3,000 mm, total height: 2,500 mm, pressure: 2,800 bar, operating pressure: 2,800 bar, fuel: diesel, overall weight: 3,000 kg, rotational speed (min.): 700 rpm, rotational speed (max.): 1,500 rpm, high-pressure hose length: 60,000 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, A Bundle of 5 ea. UHP waterblast machines, c/w a vast variety of spares and accessories, as follows: 1 x High-Pressure Water Jet Unit with Deutz-MWM V-8 Diesel Engine adjustable pressure 0–1400 bar and 0–2800 bar, dump system, with plunger changeout kit as follows: 1400 bar at 99 liters/minute, and 2800 bar at 46 liters/minute. The fluid head of this pump, including stuffing boxes and valves will be used for both 1400 bar and 2800 bar. Changing pressure range between 1400 and 2800 Bar is carried out by a simple and easy plunger changeout. The unit was built in 2013 and kept operational as a backup machine, but was only used once for 14 hours at 2800 bar for a bundle heat exchanger cleaning project. This UHP machine is mounted on a zinc coated steel skid. The Deutz-MWM engine was purchased as a used engine, with approx. 3,000 operating hours , and was fitted in 2013 with a new Jetech UHDW high-pressure water jet pump. In addition, a large amount of accessories and spare parts are included, such as dump guns & foot valves, swivel joints, surface cleaners, rotary nozzles, high-pressure lances, nozzle inserts, seals, special tools, etc. An identical UHP waterblast unit is also available, but with a Scania V-8 engine and counting 850 operating hours at max. 1400 bar / 99 liters/minute. That unit is housed in a 20ft. container, with an 800 l Diesel Tank, a work bench /vise, Furthermore, there are 3 additional high-pressure water jet units with 110 kW power each, 2 of which have Volvo TD71A Diesel Motors, plunger changeout kits for 1400 and 2800 bar. Redpfoxc E Trex Ahgocf A third unit is a Kamat K11000 with 2800 Bar OP. and a JCB Dieselmax engine. Also available is a hydraulic heat exchanger cleaning device with a rotating lance mounted on a scissor lift table, suitable for very large heat exchangers. All equipment comes from the closure of my company due to retirement. A buyer is sought for all machines and accessories as a complete package.

Condition: ready for operation (used), Year of construction: 2013, This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Dimensions of machine (lxwxh): 2500 mm x 6600 mm x 6350 mm / weight (kg): 59000 kg • Max workpiece width: 2540 mm / max workpiece length: 5540 mm • Table size (width × length): 2500 mm × 6300 mm /max load on table: 30000 kg table height from floor: 850 mm /effective width between columns: 3050 mm/ t-slot (width × number): 24h7 × 13 • Cutting feed rate: 1 to 10000 mm/min/ rapid feed rate: 20000 mm/min/ table movement x-axis: 6500 mm /x-axis travel: 6500 mm /y-axis travel: 3500 mm/ z-axis travel: 650 mm • Tool holder: bt50 + masz type/ tool storage capacity: 50 tools /max tool length: 300 mm • Power supply: 400v, 3 /phases, 50hz rated capacity: 513 kva /full load current: 741 a /peak current: 117/138 a /short circuit current: 18 ka • Spindle diameter: 100 mm /spindle speed: 30 to 4000 min⁻¹ Rcodpfx Ahjx D S Eksgof • Large table size suitable for heavy loads. /extensive tool storage capacity. /high rapid feed rate for efficient operations.

Condition: new, Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Rcedpfx Ashl H Ubohgof

Condition: as good as new (ex-display), Year of construction: 2026, HD washbasin - HD brush washbasin The washbasin has an adjustable 60 bar high pressure pump with which cleaning takes place in a closed work area. The cleaning takes place with an aqueous degreaser (10kg included in delivery) and at approx. 45 ° C. Rcodpfx Ajhl If Njhgsf Viewing window including lighting Medium filtration through a candle filter Comfort operation by means of a foot switch including turntable Technical specifications: Working area: 1,200 x 700 mm Usable height: 400 mm Payload: 50 kg Operating pressure: adjustable up to max. 60 bar Pump output: 14 lt / min Washing temperature: adjustable up to max. 45 ° C Tank capacity: 170 lt Heating capacity: 4,000 W. Total output: 8.0 kW Voltage: 400 V ac 1 P + N + PE; Frequency: 50 Hz Machine weight: approx. 180 kg Overall dimensions with the lid open: 1,480 x 991 x 2,080 mm

Condition: new, Year of construction: 2025, Dry Rotary vane vacuum pump. Available in stock. Completely new. With 12 months warranty. Nominal flow: 25 m3 / h at 50Hz. Final vacuum: 150 mbar abs. Rcodjftzpvspfx Ahgef Any clarification, do not hesitate to contact us.

Year of construction: 2026, condition: as good as new (ex-display), Manual cleaning is performed using special gloves in the front section. The effectiveness of the cleaning process is ensured by a high-pressure pump and a special spray nozzle. In these devices, a temperature of up to 60°C can be set for the cleaning fluid. The pressure is adjustable from 1 to 80 bar. Technical data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optionally up to 150 kg Spray pressure: adjustable from 1-100 bar Tank volume: 75 liters / heating power 2 kW Standard configuration: • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Upward-opening flap with 2 handles and gloves • Window made of tempered glass • Door opening/closing system with gas spring assistance • Monitoring of door opening by means of a safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for operating the cleaning pump • Interior lighting Rcedpsf A Nq Asfx Ahgof • Neoprene gloves, length 600 mm (chemical resistant) • Adjustable feet +/- 50 mm Optional: • Candle filter made of stainless steel with pump (10/25/50 microns) • External mini-pneumatic oil separator

Condition: good (used), Distance between centers: 1000 mm Center height: 175 mm CNC brand: FANUC Rodpfxstrgn To Ahgjcf CNC model: Oi-TD

Condition: used, Wall-mounted slewing crane DEMAG type KBK 2 Demag boom no.: KBK-982 040 44 Demag wall bracket no.: 85104044 Year of manufacture: 2000 Load capacity: 500 kg Jib length: 4000 mm Slewing range: 270° Wall mounting plate: 1170 x 440 mm Height lower edge of boom to upper edge of wall bracket: 1000 mm Rcjdpfxstqwrve Ahgjf Flange plate of wall bracket to centre of pin: 270 mm Total length from flange plate of wall bracket to tip of jib: 4330 mm - Jib profile: DEMAG KBK 2 C-profile rail - Trolley for DEMAG KBK 2 C-profile rail - Original yellow paint Net weight: 170 kg Very good condition Price without chain hoist – chain hoist or crane can also be found in our shop.