Used High Pressure Air for sale (45,739)

Condition: new, ABEL air feed fitting on the pressure side for piston diaphragm high-pressure pumps. Codpfx Ajiyp Tzsc Nopu NEW ! We are your ABEL pump supplier, service and spare parts partner for ABEL pumps. Pumps and spare parts available from stock or at short notice.

Year of construction: 1989, condition: ready for operation (used), High pressure pump ABEL PC57.1S Article no.: RE-HU-2019-1102-P51e Machine: High pressure pump Type: ABEL PC57.1S Cpodpfx Aod Hiwioc Nou Mach.-Nr.: 12042E9 Capacity: 18 m3/h Pressure: 100 bar Motor: 75 kW

Condition: like new (used), Year of construction: 2025, operating hours: 250 h, functionality: fully functional, pressure: 2,800 bar, overall weight: 3,000 kg, rotational speed (min.): 1,900 rpm, pump capacity: 30 l/min, Equipment: type plate available, HAMMELMANN AQUAJET 144 Codpfsvgrpxox Ac Njpu Year: 09/2025 2800 BAR Manufacturer's warranty Engine: DEUTZ TCD 6.1 ST5, 140 kW Available immediately

Condition: new, Year of construction: 2020, A new high-pressure pump from Andritz Ritz GmbH is offered. Cpsdevu T A Njpfx Ac Nou Year of manufacture 2020. Technical details: see nameplate.

Year of construction: 2020, operating hours: 0 h, condition: as good as new (ex-display), High-pressure cleaning device, high-pressure rinsing device, high-pressure rinsing device with suction device on hot-dip galvanized and painted high quality steel frames with forklift lugs. The following models are available: Vortex Combi 800 Sewer B - 800 l sludge tank - 2750 l/min. suction power - Petrol engines: for suction Honda GX390 8,8kW and for cleaning - Honda GX690 17,9kW Csdpfx Aofdkb Ejc Njpu Vortex Combi 1000 Sewer D - 1000 l sludge tank - 3600 l/min. suction power - Diesel engines: for vacuuming Yanmar L100 8,0kW and for cleaning Kohler KDW 1003 18,9kW high pressure pump 160 bar at 55 l/min. Manufacturer: COMET Model: TW Premium HIGH PRESSURE HOSE REEL: Type: manual hose reel Material: stainless steel Capacity: max. 50 m ½" High pressure hose Hose: 50 m ½" High pressure hose (Included) LOW PRESSURE WATER SUPPLY HOSE REEL: Type: manual hose reel Material: stainless steel Capacity: max. 35 m ¾" Low pressure hose Hose: 35 m ¾" Low pressure hose (Included) FUEL TANK: Capacity: approx. 13 l WATER FILTER: With washable cartridge and drain valve Filtration degree: 50 mesh IN THE SCOPE OF DELIVERY: Multifunction radio remote control IMET; - On / Off Motor; - On / Off bypass; - Electrical speed control +/-; - Emergency stop button; Battery charger for radio remote control; 300 o. 500 l water tank made of polyethylene; OPTIONAL ON REQUEST: 60 m ½" High pressure hose; Pulsation/booster pump; ACCESSORIES ON REQUEST: Kit STORZ for the connection to the water hyd

Year of construction: 2008, condition: excellent (used), Stationary high pressure pump unit Hammelmann HDP 127 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 127 Working pressure: 600 bar Delivery rate: 66 l/min. Drive speed: 1500 rpm. Driving power: 74 kW with SCHORCH KA7280S-BB01B-Z 3~ IP55 75kW electric motor, with pressure regulating valve, with safety valve, with oil cooling system. Cpodpoh Uc Iujfx Ac Nou dimensions LxWxH: approx. 1.700x1.000x1.300 mm weight: approx. 1.300 kg Year of manufacture: 2008 Condition: In very good used condition.

Condition: used, Year of construction: 2007, operating hours: 5,573 h, functionality: fully functional, operating pressure: 1,200 bar, power: 122 kW (165.87 HP), pump capacity: 40 l/min, Equipment: type plate available, FALCH type T12, year of manufacture 2007, machine output 122KW/1200BAR/40 litres per minute. The unit is fully functional, featuring a bypass modification from water to air and a refurbished external machine cover. Supplied with basic equipment: control gun with rotary nozzle, control cable, and 20m high-pressure hose. Codjxyx Evspfx Ac Nopu

Year of construction: 2008, condition: used, High-pressure KAMAT pump with IVECO diesel power unit in fully operational condition featuring new Siemens electronic controls. Machine output: 130 kW/1180 bar / 57 l-min. The unit has its own stainless steel water tank with a capacity of 3,000 liters. VOLVO FL 240 truck with hydraulic tail lift, year 2009, 154,989 km. The machine can also be sold separately without the truck. Price for standalone KAMAT unit: €20,000. Price for VOLVO: €13,500. Cpedpfxsxyxy Hs Ac Neu

Condition: excellent (used), mileage: 312,116 km, power: 265 kW (360.30 HP), first registration: 05/2010, fuel type: diesel, axle configuration: 6x4, wheelbase: 4,200 mm, fuel: diesel, fuel tank capacity: 15,000 l, brakes: engine braking, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro4, suspension: steel, loading space volume: 15 m³, Year of construction: 2010, Equipment: ABS, air conditioning, differential lock, electric window regulation, = Additional Options and Accessories = - Leaf suspension - Brake booster - Differential lock - Enclosed cab - Speed limiter - Refrigerator - Air-suspended seats - Sleeper cab Csdpfx Ajxyvzzsc Njpu - Sun visor - Toolbox = Notes = MAN TGS 33.360, 6x4, vacuum and high-pressure truck, tipper tank, manual gearbox, steel suspension, Wittig pump RFW 200, high-pressure pump Pratisolli K32, Belgian registration. Good working condition! = Further Information = Technical information Number of cylinders: 6 Transmission Gearbox: ZF, 16-speed, manual transmission Axle configuration Suspension: leaf suspension Front axle: steerable; left tire tread: 70%; right tire tread: 70% Rear axle 1: twin tires; differential lock; left inner tread: 40%; left outer tread: 40%; right inner tread: 40%; right outer tread: 40%; reduction: planetary axles (outboard) Rear axle 2: twin tires; differential lock; left inner tread: 30%; left outer tread: 30%; right inner tread: 30%; right outer tread: 30%; reduction: planetary axles (outboard) Weights Unladen weight: 16,660 kg Payload: 16,340 kg Gross vehicle weight: 33,000 kg Condition Technical condition: very good Optical condition: very good Further information Please contact Gerrit Haverhoek for more information.

Condition: good (used), mileage: 119,077 km, power: 360 kW (489.46 HP), first registration: 02/2024, fuel type: diesel, tire size: 385/55 R22,5, axle configuration: 4x2, wheelbase: 38,000 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2024, Equipment: ABS, cruise control, electric window regulation, fridge, parking heater, power mirror, second fuel tank, spoiler, = Additional Options and Accessories = - 2 beds - Adaptive cruise control Cpodpfx Ajxyizzoc Nsu - Airflow system - Aluminum fuel tank - Roof spoiler - FCW (Forward Collision Warning) - High beam headlights - Speed limiter - LDWS (Lane Departure Warning System) - Radio/CD player - Reversing camera - Stationary air conditioning - VEB (Volvo Engine Brake) - Toll Collect preparation = Remarks = Full air suspension Stationary air conditioning 4.2 tachograph Reversing camera Adaptive cruise control Auxiliary heater Refrigerator VEB (Volvo Engine Brake) Lane Departure Warning System (LDWS) Forward Collision Warning (FCW) = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 8,428 kg Gross vehicle weight: 8,428 kg Axle Configuration Axle Brand: Anders Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/55 R22.5; Max. axle load: 8,000 kg; Steering; Left tire tread: 35%; Right tire tread: 35% Rear axle: Tire size: 315/70 R22.5; Twin tires; Max. axle load: 11,500 kg; Left inner tire tread: 35%; Left outer tire tread: 35%; Right inner tire tread: 35%; Right outer tire tread: 35% Interior Interior color: grey Identification License plate: BB-497-X Product Safety Supplier: Nijwa Used Trucks Vormerij 12 7621HL BORNE, NL

Condition: good (used), water pressure: 1,500 bar, Aquablast DUO surface cleaner. Clean, demolish, and strip surfaces with high-pressure water. Cpedpfx Ajv S Ep Aoc Nou Clean, strip, remove, demolish, and roughen The Aquablast offers numerous applications for every surface. Different results are achieved depending on the pressure and flow rate. Applications range from thorough surface cleaning to targeted removal of solids.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Nilfisk Dryft is the effortless path to more thorough and efficient cleaning. Our first micro-scrubber dryer is more hygienic than a mop and as compact as a stick vacuum. It easily cleans even hard-to-reach areas—crowded spaces, challenging corners and edges, narrow gaps, and around obstacles. It is the natural, modern successor to the mop. Effectively removes bacteria. Orbital scrubbing head delivers high cleaning performance (4,200 oscillations per minute). Uses one third less water than comparable products. Rapid battery charging and swapping with 1 hour runtime/charging time. Click-on/off system for quick pad changes. Squeegee bar removes quickly and without tools. Service kits for easy replacement of wear parts. Control panel with only 3 buttons and customizable settings. S-motion pattern enables fast and effective cleaning of large areas. Low-profile scrub deck cleans under furniture and shelving. Unique scrub deck design enables edge and corner cleaning. Codpfoxx Tw Rex Ac Nspu

Year of construction: 2012, condition: excellent (used), Stationary high pressure pump unit Hammelmann HDP 47 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 477 Working pressure: 300 bar Delivery rate: 24 l/min. Drive speed: 1500 rpm. Drive power: 14 kW with AC motors ACM 160L-4/HE 3~ IP55 15kW electric motor, with pressure regulating valve, with safety valve, Cpjdpeh Uc Nkefx Ac Nju with oil cooling system. dimensions LxWxH: approx. 1.100x750x1.200 mm Weight: approx. 570 kg Year of manufacture: 2012 Condition: In very good used condition.

Condition: new, Year of construction: 2024, functionality: fully functional, HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. + Up to 40 % energy savings compared to conventional systems, Investment eligible for subsidies + High energy efficiency: servo direct drive, no reactive current, low and and flexible power consumption + Low connected load required: no power consumption when the WSS system is at a standstill of the WSS system, suitable for companies with low energy supply + 3-piston plunger pump: high liter capacity and high efficiency of up to 98 %, replaces 6000 bar technology, long maintenance intervals, simple design, no hydraulic system, no warm-up and start-up phase - ready to start immediately + Permanent pressure control and integrated pulsation damping: Cjdpfx Acou Hz Tqo Njpu Continuous readjustment of the cutting pressure to the set value - no pressure fluctuations, higher cutting speed than with a pressure intensifier in a comparable combination + Lowest noise level of 75 dB: high-quality complete unit with soundproof housing + Can be used universally for all waterjet machines and brands

Condition: ready for operation (used), A high-pressure pump BFT with Rexroth and VEM components is available. Pressure: approx. 4000bar, motor power: approx. 37kW. An on-site inspection is possible. Cpjdpfjxxa T Esx Ac Nou

Condition: new, Year of construction: 2025, functionality: fully functional, operating pressure: 150 bar, high-pressure hose length: 10,000 mm, empty load weight: 40 kg, warranty duration: 24 months, input frequency: 230 Hz, SPECIFICATION: Cpedow Icciopfx Ac Neu Model: KPC-3.5P Code: K8.011.0051 Voltage/Hz: 230/50 Pressure (Bar): 120/150 max Flow Rate (L/h): 660 Power (W): 3000 Motor: Induction RPM: 1450 PREMIUM CRANKSHAFT PUMP BRASS HEAD WITH INTEGRATED BYPASS VALVE 18 mm CERAMIC PISTONS STAINLESS STEEL INLET AND OUTLET VALVES INDUCTION MOTOR WITH THERMAL PROTECTION AND COPPER WINDINGS STOP&GO FUNCTION EQUIPPED WITH PROFESSIONAL ACCESSORIES FEATURING 4 NOZZLES WITH DIFFERENT SPRAY ANGLES FOR REMOVING ALL TYPES OF CONTAMINANTS AND SURFACES INCLUDES A PRACTICAL ACCESSORY HOLDER AND A PROFESSIONAL BRAIDED HOSE Why choose a crankshaft pump with ceramic pistons? - The crankshaft pump is a solution renowned in industrial applications. Its robust design ensures a significantly longer service life compared to more affordable washers equipped with axial or rotary pumps. - Ceramic pistons offer exceptional resistance to high temperatures and wear, providing reliable and quiet operation for years. - Thanks to this construction, the unit can be used in continuous operation mode without the risk of overheating or excessive component wear.

Condition: new, Year of construction: 2025, functionality: fully functional, operating pressure: 200 bar, high-pressure hose length: 10,000 mm, empty load weight: 56 kg, warranty duration: 24 months, input frequency: 400 Hz, SPECIFICATION: Model: KPC-5.5TP Voltage/Hz: 400/50 Pressure (Bar): 200 Flow Rate (L/h): 900 Power (W): 7200 Motor: Induction RPM: 1450 Cpedpfx Acjw Ickae Nsu PREMIUM CRANKSHAFT PUMP BRASS HEAD WITH FLANGED BYPASS VALVE CERAMIC PISTONS, DIAMETER 18 mm STAINLESS STEEL SUCTION AND DELIVERY VALVES THREE-PHASE INDUCTION MOTOR WITH THERMAL PROTECTION AND COPPER WINDINGS EQUIPPED WITH PROFESSIONAL ACCESSORIES, INCLUDING 4 NOZZLES OF DIFFERENT SPRAY ANGLES TO HANDLE ANY TYPE OF DIRT AND SURFACE FEATURES A PRACTICAL HOLDER FOR ACCESSORY STORAGE AND A PROFESSIONAL BRAIDED HOSE Advantages of a crankshaft pump with ceramic pistons: - Precise operation and very high efficiency – these pumps are indispensable in environments where reliability over many hours of daily operation is crucial. - Minimal component wear – ceramic pistons are far more durable than steel ones, so they require less frequent servicing. - Resistance to chemicals and variable temperatures – they perform excellently even when working with aggressive chemicals and hot water. - Smoother operation – the pump runs more quietly and generates less vibration, improving operator comfort. Low-speed Motor – Professional design: - 1450 RPM ensures lower component wear and reduced noise emissions. - Designed for heavy-duty operations, ideal for tasks requiring continuous and extended use.

Condition: new, Year of construction: 2025, functionality: fully functional, operating pressure: 230 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, warranty duration: 24 months, SPECIFICATION: Model: KPC-7.5TP Voltage/Hz: 400/50 Max Pressure (Bar): 230 Flow Rate (L/h): 1080 Power (W): 10,000 Motor: Induction RPM: 1450 Cpjdpfx Acsw Icn Ss Nou PREMIUM CRANKSHAFT PUMP BRASS HEAD WITH FLANGED BYPASS VALVE CERAMIC PISTONS, 18 mm DIAMETER STAINLESS STEEL SUCTION AND DELIVERY VALVES THREE-PHASE INDUCTION MOTOR WITH THERMAL PROTECTION AND COPPER WINDINGS PROFESSIONAL ACCESSORIES INCLUDING 4 NOZZLES WITH DIFFERENT SPRAY ANGLES FOR ALL TYPES OF SURFACE AND CONTAMINANT EQUIPPED WITH A PRACTICAL ACCESSORY HOLDER AND A PROFESSIONAL, BRAIDED HIGH-PRESSURE HOSE Crankshaft pump with ceramic pistons – uncompromising quality: - This pump type represents the top tier among pressure washers – ensuring reliability, precise operation, and long service life. - Ceramic pistons are highly resistant to wear, significantly extending maintenance intervals. - Ideal for continuous use – with no performance loss, even after many hours of daily operation. Low-speed motor – built for extreme workloads: - Operates at 1,450 rpm, minimizing mechanical wear. - Powerful, efficient, and properly cooled for demanding, all-day applications.

Condition: good (used), Year of construction: 2011, machine/vehicle number: HD 11009208-2, pressure: 350 bar, overall weight: 890 kg, rotational speed (max.): 1,500 rpm, power: 31 kW (42.15 HP), Equipment: type plate available, Used high pressure pump. Technical specifications: Year of manufacture: 2011 Type: RS716E/350 Serial number: HD 11009208-2 31 kW 350 bar 1500 1/min 47 l/min Csdpfx Acotuqmge Nepu With Hammelmann ACM 225S-4/HE 400/690V 66.2/38.4A 50Hz 37kW 1480 1/min Condition: used (see pictures and type plates) Scope of delivery: 1 pump

Condition: good (used), Year of construction: 2009, machine/vehicle number: HD 10906347, pressure: 350 bar, overall weight: 850 kg, rotational speed (max.): 1,500 rpm, power: 35 kW (47.59 HP), Equipment: type plate available, Used high pressure pump. Technical specifications: Year of manufacture: 2009 Type: RS716E/350 Serial number: HD 10906347 35 kW 350 bar 1500 1/min 47 l/min With Küenle KDGN 225S4 NV 400 / 690V 67.2 / 39A 50Hz 37kW Csdpfxjtuqmko Ac Nepu 1475 1/min Condition: used (see pictures and nameplates) Scope of delivery: 1 pump

Condition: good (used), Year of construction: 2017, machine/vehicle number: HD 11610556, pressure: 350 bar, overall weight: 850 kg, power: 30 kW (40.79 HP), Equipment: type plate available, Used high-pressure plunger pump with integrated gearbox and special crosshead seal. Designed for low-viscosity media. Main areas of application in industry and services: - Sewer cleaning - Descaling - Industrial high-pressure cleaning - Special applications Technical specifications: Type: KD716-GK Year of construction: 2017 30kW Pressure: 350 bar 1500 1/min 47 l/min Cedpfx Ajtuqlxoc Nepu With Elektra electric motor 14BG 220-4AA60-Z 225S 400 / 690V 68 / 39.5A 50Hz 37kW 1475 1/min Condition: used (see pictures and type plates) Scope of delivery: 1 PUmpe

Condition: used, Year of construction: 2022, operating hours: 45 h, functionality: fully functional, operating pressure: 3,000 bar, fuel: electricity, Demonstration machine, Machine available immediately. Only used for demonstrations. Only 45 hours on the hour meter. Technical condition: like new. Complete set: Robot + radio remote control + control unit + support winches. Operates with a 200 kW high-pressure pump (recommended by the manufacturer, but can be configured differently). Worldwide shipping available. Similar to, but better than: Vertidrive, Falch, Kamat, Robot PlusPlus. SPIDERJET® surface preparation devices — Whether cleaning, paint stripping, or de-coating large steel structures such as ships, tanks, or vessels, the SPIDERJET® surface preparation equipment delivers fast and clean results and, thanks to compact versions, can be maneuvered even through the narrowest areas. Minimal setup times ensure rapid deployment, and the use of high-pressure water without additives or chemicals protects the environment. High coverage rates and semi-automatic operation reduce working time and costs while increasing work safety. Cpjdpfxjxwb Egs Ac Neu

Year of construction: 2000, condition: excellent (used), Atlas Copco Crepelle high pressure compressor Type: D44 Year of manufacture: 2000 Operating pressure: 40 bar Cpjdpfx Acjf Hly So Nou Power: 220 kW Speed: 839 RPM Compressor can be inspected at any time.

Condition: repair required (used), Year of construction: 2011, functionality: not functional, machine/vehicle number: 8506, operating pressure: 2,000 bar, Equipment: documentation/manual, 1. Product Overview We are pleased to offer a second-hand MiniDeBEE New Generation of High Pressu Cpjdpfx Ajxuvm Hec Nou Homogenizer, specially suited for cell lysis, particle size reduction, production of nano and micro-emulsion. Perfect mix between laboratory and pilot scale. Scaling up guaranteed. 2. Technical Specifications Model: MiniDeBEE 2011 - up to 2000 bar Max Flow rate: 200 ml/min Condition: Used for 1.5 years at Cosaic - Currently NOT FUNCTIONAL ; (problem diagnosed with Pion’s support.Cost repair spare parts up to 2500 EUR;

Condition: reconditioned (used), Year of construction: 2017, operating hours: 1,651 h, functionality: fully functional, machine/vehicle number: G393, operating pressure: 500 bar, total length: 1,175 mm, total height: 945 mm, total width: 760 mm, pressure: 500 bar, type of input current: three-phase, empty load weight: 290 kg, input voltage: 400 V, power: 15 kW (20.39 HP), input current: 32 A, noise level: 78 dB, pressure (max.): 500 bar, input frequency: 50 Hz, water pressure: 500 bar, Dear Sir or Madam, Cpjdpfxexugifj Ac Neu For sale is an overhauled Falch WheelJet 15 Electric without accessories. 500 bar 15 l/min 32A plug Best regards, STS-Reinigungstechnik Team