Used High Pressure Air for sale (43,593)

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: B5.00172.1454, total width: 850 mm, total length: 2,000 mm, total height: 1,450 mm, pressure: 340 bar, operating pressure: 340 bar, type of input current: three-phase, overall weight: 1,700 kg, rotational speed (max.): 1,500 rpm, empty load weight: 1,700 kg, power: 147 kW (199.86 HP), year of last overhaul: 2026, pump capacity: 239 l/min, Equipment: type plate available, Stationary high-pressure pump unit Hammelmann HDP 172 mounted on a base frame. Similar, but not Kamat, Uraca, or Woma. Pump type: HDP 172 Operating pressure: 340 bar Flow rate: 239 l/min Drive speed: 1500 rpm Drive power: 147 kW with SIEMENS 160 kW 3-phase motor, IP55 Dimensions (LxWxH): approx. 2000x850x1450 mm Fpjdpfjyablmox Aalog Weight: approx. 1700 kg Year of manufacture: 2015 Condition: New piston seals installed and valves inspected in January 2026. In very good used condition.

Condition: good (used), Heavy duty high pressure washer. Fedpfeh Rkiljx Aalopg Two motors - 90kW + 1,5kW Machine was used for few hours and then stored at the warehouse. Delivery is available.

Condition: good (used), High-pressure standpipe -Pressure: maximum 30 bar -Predos is a special high-pressure stainless steel standpipe with a burst pressure of 70 bar. -Pressures of up to 30 bar may be required when clearing blocked drains. -High-pressure gauge Fpedpfx Aob A Shpealeg -with lid lifter type: Hercules -in the suitcase -Dimensions: 1200/360/H200 mm -Weight: 16 kg

Year of construction: 2007, operating hours: 2,000 h, condition: used, functionality: fully functional, cylinder diameter: 200 mm, pressure (max.): 6,000 bar, machine/vehicle number: 600/55, High-Pressure Food Processing Machine (HPP System) – Wave 6000/55 This high-pressure food pasteurization system (HPP) is a unit designed for batch processing of packaged food using hydrostatic pressure. The machine is fully operational, well maintained, and suitable for research, product development, and low-to-medium volume industrial production. High-pressure processing (HPP) offers significant advantages for food manufacturers seeking to improve product safety, quality, and shelf life without the use of heat or preservatives. By applying up to 600 MPa of hydrostatic pressure to already packaged products, HPP inactivates harmful pathogens such as Listeria monocytogenes, Salmonella, and E. coli while preserving the natural taste, texture, nutrients, and color of the food. This makes HPP an attractive technology for clean-label formulations. In addition, the process typically doubles or even triples the shelf life of many refrigerated foods, reducing waste and improving distribution flexibility. Because HPP is a post-packaging treatment, recontamination risks are minimized, enabling manufacturers to meet stringent food safety standards in domestic and export markets. The technology is suitable for a wide range of products, including meat, seafood, juices, plant-based foods, ready-to-eat meals, and high-value chilled items. Fedpfx Asx E Utioalepg The system offers a treatment chamber volume of 55 L, reaching pressures up to 6,000 bar (600 MPa), with automatic basket loading/unloading and an integrated intensifier. It is ideal for enhancing food safety, extending shelf life, and enabling clean-label product concepts. Technical Details Model: Wave 6000/55 Chamber layout: Horizontal Chamber dimensions: Ø 200 mm × 2,000 mm Chamber volume: 55 L Total equipment length: 8,020 mm Maximum working pressure: 6,000 bar (600 MPa) Pressure medium: Water, free of additives Processing water temperature: +5 °C to +30 °C Pressure-build time (0–6,000 bar): 3.9 min Intensifiers: 1 integrated Electrical power: 47 kW (50 Hz) Loading/unloading system: Automatic Total weight: ~20,000 kg Condition and Use Cases The machine is in very good condition and suitable for: Meat, seafood, ready-to-eat meals Dairy, beverages, plant-based products Shelf-life extension and pathogen reduction R&D, validation trials, pilot production Cycles completed (as of Jan 2025): 20,000 Included with the High Pressure Food Processor WAVE 6000/55: High-pressure vessel made of stainless steel, wire-wound with high-resistance cable; horizontal layout with 55 L useful volume Yoke constructed from high-quality steel layers, double-primed and painted Stainless steel vessel plugs Support beds Hydraulic power unit with vessel opening/closing mechanisms Integrated intensifier (1 unit) High-pressure stainless steel piping for intensifier–vessel connection Water filtration system (5 µm) Temperature probe for monitoring processing water via the client fluid circuit Tactile touch screen for automatic and manual operation (interface in German) Electrical control cabinet SCADA system for control and data recording Internet communication module for remote service Instruction manual The machine has been used for reasearch purposes and has only done ~20.000 cycles. It is assumed the average cycle length is 6minutes = 2,000 hours All technical specifications and details are provided without guarantee. Subject to prior sale and possible errors or omissions.

Year of construction: 2025, condition: as good as new (ex-display), AVAILABLE IMMEDIATELY! Manual cleaning is carried out using special gloves in the front section. The effectiveness of the cleaning is ensured by a high-pressure pump and a special spray nozzle. A temperature of up to 60 °C can be set for the cleaning fluid in these devices. The pressure can be set from 1- 80 bar. Technical data: Work surface: 950 x 700 mm Internal height: 450 mm Fpjdpjf A Nqqsfx Aaleg Load capacity: 70 kg Optional up to 150 kg Spray pressure: 1-80 bar adjustable Tank volume: 75 liters / heating capacity 2kW Basic version: - Blow-off gun in the interior - Frame, feet, cover and housing made of stainless steel - Removable stainless steel plates above the tank - Flap can be opened upwards with 2 handles and gloves - Tempered glass window - Door opening/closing system supported by gas struts - Door opening monitored by safety limit switch - Filter on the suction side of the pump (500 micron) - Foot switch for operating the cleaning pump - Interior lighting - Neoprene gloves L 600mm (chemical resistant)- Adjustable feet +/- 50 mm - External mini-pneumatic oil separator

Year of construction: 2026, condition: new, machine/vehicle number: 1234, Teljesítmény: 300 L/óra, 4 kW Maximum hőmérséklet: 90 °C Feszültség: 400 V Méret: 850 x 1150 x 920 mm Súly: 365 kg FBF 1000 High pressure homogeniser Specification: Capacity: 300 L/h , 4 kW Maximum temperature: 90 °C Two homogenizing phase: 1.: 200 bar, 2.: 50 bar Feeding pressure requested: 2 bar Voltage: 400 V Consumption of water: 60 L/h Consumption of air: 5 bar, 0,3 Nl/minute Gross size: 850 x 1150 x 920 mm Gross weight: 365 kg Compression head and valve: - milled from one block - high pressure resistant pistons - vibration-free Structure: - vibration free pump - power transmission through „V” belts, 1:2 - automatic oil lubrication with oil level indicator Accessories: - wearing part set - tools - oil Fsdpfxsiu Hype Aalspg FBF 1000 Hochdruckhomogenisator - Leistung: 300 L / h 4 kW - Maximale Betriebstemperatur: 90 ° C. - Zweistufige Homogenisierung: 1 .: 200 bar, 2 .: 50 bar - Versorgungsdruck mindestens 2 bar - Stromspannung: 400V - Wasserbedarf: 60 L / h - Luftverbrauch: 5 bar, 0,3 Nl / min - Gewicht: 365 kg - Abmessungen: 850 x 1150 x 920 mm Kompressionskopf und Ventil: - Ein Block, der mit einer CNC-gesteuerten Maschine aus einem Block gefräst wurde, mit 5 Jahren Garantie. - Kolben aus speziell gehärtetem Edelstahl. - Energie- und kostengünstige Ventile sorgen aufgrund ihrer hohen Stabilität für einen vibrationsfreien Betrieb. Struktur: - Pumpe aus hochwertigem vibrationsfreiem Gusseisen - Die Übertragung erfolgt auf "Keilriemen" mit Doppelübertragung - 3-phasiger 4-poliger Motor - Ölgeschmiertes Gehäuse mit Ölstandsfenster Zubehör: - Verschleißteilset - Werkzeuge für die Wartung - Schmieröl - Anweisungen

Year of construction: 2026, condition: new, machine/vehicle number: 12134, Teljesítmény: 1000 L/óra, 7,5 kW Maximum hőmérséklet: 90 °C Feszültség: 400 V Méret: 1300x1600x1500 mm Súly:1000 kg FBF 1000 High pressure homogeniser Specification: Capacity: 1000 L/h 7,5 kW Maximum temperature: 90 °C Two homogenizing phase: 1.: 200 bar, 2.: 50 bar Feeding pressure requested: 2 bar Voltage: 400 V Consumption of water: 70-90 L/h Consumption of air: 5 bar, 0,3 Nl/minute Gross size: 1300x1600x1500 mm Gross weight:1000 kg Compression head and valve: - milled from one block - high pressure resistant pistons - vibration-free Structure: - vibration free pump Fpodpsiu Hyzjfx Aaljg - power transmission through „V” belts, 1:2 - automatic oil lubrication with oil level indicator Accessories: - wearing part set - tools - oil FBF 1000 Hochdruckhomogenisator - Leistung: 1000 L / h 7,5 kW - Maximale Betriebstemperatur: 90 ° C. - Zweistufige Homogenisierung: 1 .: 200 bar, 2 .: 50 bar - Versorgungsdruck mindestens 2 bar - Stromspannung: 400V - Wasserbedarf: 70-90 L / h - Luftverbrauch: 5 bar, 0,3 Nl / min Kompressionskopf und Ventil: - Ein Block, der mit einer CNC-gesteuerten Maschine aus einem Block gefräst wurde, mit 5 Jahren Garantie. - Kolben aus speziell gehärtetem Edelstahl. - Energie- und kostengünstige Ventile sorgen aufgrund ihrer hohen Stabilität für einen vibrationsfreien Betrieb. Struktur: - Pumpe aus hochwertigem vibrationsfreiem Gusseisen - Die Übertragung erfolgt auf "Keilriemen" mit Doppelübertragung - 3-phasiger 4-poliger Motor - Ölgeschmiertes Gehäuse mit Ölstandsfenster Zubehör: - Verschleißteilset - Werkzeuge für die Wartung - Schmieröl - Anweisungen

Condition: excellent (used), Year of construction: 2017, operating hours: 4,000 h, functionality: fully functional, operating pressure: 2,500 bar, Used Falch Trail Jet 125 high-pressure washer with 2500 bar pressure. The unit is in very good technical condition and ready for operation. Included with the device are the following items: - 3 new Falch high-pressure hoses - 3 used Falch high-pressure hoses - 3 control cables for connecting the Falch gun - New Falch 4-nozzle rotary head - Falch gun - 3 lance extensions for the Falch gun - Additional components for the machine: sets of seals, filters, etc. The machine has been serviced at the Falch headquarters and has operated for 5 hours since service. Machine data: Year of manufacture: 2017, power: 129 kW, Deutz engine. Fsdpfxsxzk U Sj Aalopg The machine allows for adjustable working pressure.

Year of construction: 1998, condition: good (used), machine/vehicle number: 98.01112.1773, Stationary high pressure pump unit Hammelmann HDP 122 on base frame without engine. Similar but no Kamat, Uraca, Woma. Pump type: HDP 112 Working pressure: 530 bar Delivery rate: 55 l/min. Drive speed: 1500 rpm. Driving power: 55 kW without motor, with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 2000x1000x1400 mm weight: approx. 300 kg Fjdpegz H Akjfx Aalspg year of construction: 1998 Condition: in good used condition.

Condition: good (used), KSB VF35-5 Movitec high-pressure inline pump 11 kW Manufacturer: KSB Fedpfxsq Tqnqs Aalepg Type: Movitec VF32 5 ID No.: 47110112 Maximum flow rate: 27 m³/h Maximum flow rate: 2850 l/min Mains voltage: 3~400/690 V Protection class: IP55 Power: 11 kW 21.8 A You can find more centrifugal pumps - new and used - in our store! International shipping costs on request!

Condition: new, MSP – Manual Hand Spray Systems The MSP range of manual hand operated washing systems are made entirely from high quality stainless steel 304 and can be supplied high-pressure ump option achieving pressures of up to 60 bar. Thanks to a specially designed heavy-duty washing chamber the MSP range washes parts within a closed sealed envireonment ensuring the surrounding workplaces is kept clean, tidy and dry from pressurised water. Fsdpfx Aash E Szmeljpg The MSP range is enviromentally friendly by utilising alkaline aqueous biodegradable detergents and allows for effective energy consumption using a foot pedal operation that oprates the pump only when pressed. This makes the MSP a very capability unit and a must have for any workshop enviroments cleaning heavy soiled contaminants.

Condition: used, Mechanical High-Pressure Machine Vice GRESSEL Type MHS 126-3 High-pressure clamping device Jaw width: 125 mm Jaw height: 40 mm Opening width: 221 mm Clamping force: 2 / 3 / 4 tons Guideway height: 62 mm - Clamping force adjustable in 3 stages - High-pressure vice with mechanical power amplifier - Clamping range adjustable in 2 stages - Lateral thread for workpiece stop Dimensions: 440 x 140 x 102 mm Fsdpfx Aajxlkvdelspg Weight: 26 kg

Condition: good (used), Year of construction: 2002, Ingersol rand streamline plus waterjet intensifier pump. Fsdpfxsnp Iywo Aalopg good working condition

Year of construction: 2011, condition: like new (used), Offer on request 2 pieces available Motor power: 3 KW Voltage: 400 V Maximum capacity: 40 LM Pressure: 20 Bar Tank capacity: 980 Lt. Weight: 900 kg with cooling system EUROCHILLER GC-B A 009 SP - year 2011 400 V 50 HZ 6 Kw 9 A 24 Vaux Fpodjdtyx Ejpfx Aalsg 500 VI 54 IP R407c gas Air condenser: 25°C Water process: 15°C Weight: 4 kg

Condition: used, Vertical multistage high-pressure centrifugal pump KSB Type Movichrom N CN 3/10 2R Serial no. 1-P30-837561 Nominal flow rate max. 3 m3/h Nominal delivery head 70 meters = 7 bar Nominal speed 2900 rpm Motor power 1.5 kW Mains connection 400 Volt, 50 Hz - Pump construction in 10 stages Fodpfx Aajrl U S Eslepg - Pump elements made of stainless steel, pump base made of cast iron - Connection flanges DN 32 - Suitable for drinking water supply, irrigation and drainage Space required for pump L x W x H 250 x 220 x 830 mm Weight 38 kg Unused replacement pump from stock, as good as new Not a submersible pump or submersible pump

Condition: good (used), Year of construction: 2011, machine/vehicle number: HD 11009208-2, pressure: 350 bar, overall weight: 890 kg, rotational speed (max.): 1,500 rpm, power: 31 kW (42.15 HP), Equipment: type plate available, Used high pressure pump. Fodpfxotuqmge Aaljpg Technical specifications: Year of manufacture: 2011 Type: RS716E/350 Serial number: HD 11009208-2 31 kW 350 bar 1500 1/min 47 l/min With Hammelmann ACM 225S-4/HE 400/690V 66.2/38.4A 50Hz 37kW 1480 1/min Condition: used (see pictures and type plates) Scope of delivery: 1 pump

Condition: good (used), Year of construction: 2009, machine/vehicle number: HD 10906347, pressure: 350 bar, overall weight: 850 kg, rotational speed (max.): 1,500 rpm, power: 35 kW (47.59 HP), Equipment: type plate available, Used high pressure pump. Technical specifications: Year of manufacture: 2009 Type: RS716E/350 Fedpfotuqmkjx Aaljpg Serial number: HD 10906347 35 kW 350 bar 1500 1/min 47 l/min With Küenle KDGN 225S4 NV 400 / 690V 67.2 / 39A 50Hz 37kW 1475 1/min Condition: used (see pictures and nameplates) Scope of delivery: 1 pump

Condition: good (used), Year of construction: 2017, machine/vehicle number: HD 11610556, pressure: 350 bar, overall weight: 850 kg, power: 30 kW (40.79 HP), Equipment: type plate available, Used high-pressure plunger pump with integrated gearbox and special crosshead seal. Designed for low-viscosity media. Main areas of application in industry and services: - Sewer cleaning - Descaling - Industrial high-pressure cleaning - Special applications Technical specifications: Type: KD716-GK Year of construction: 2017 30kW Pressure: 350 bar 1500 1/min 47 l/min With Elektra electric motor 14BG 220-4AA60-Z 225S 400 / 690V 68 / 39.5A 50Hz 37kW 1475 1/min Condition: used (see pictures and type plates) Scope of delivery: 1 PUmpe Fjdstuqlxepfx Aaljpg

Year of construction: 1987, condition: ready for operation (used), Second-hand stainless steel pressure STAWAG container 100 L/26 gallons (brewing keg) Year of manufacture: 1987 Producer: STAWAG Useful volume: 100 L Total Ø: 400 x 950 mm Test pressure: 4,5 bar Operating pressure: 3 bar Operating temperature: 130 °C Fpsdpfxedyqacs Aalsg Condition: excellent

Condition: used, Year of construction: 2022, operating hours: 45 h, functionality: fully functional, operating pressure: 3,000 bar, fuel: electricity, Demonstration machine, Machine available immediately. Only used for demonstrations. Fjdpfoxwb Egsx Aaljpg Only 45 hours on the hour meter. Technical condition: like new. Complete set: Robot + radio remote control + control unit + support winches. Operates with a 200 kW high-pressure pump (recommended by the manufacturer, but can be configured differently). Worldwide shipping available. Similar to, but better than: Vertidrive, Falch, Kamat, Robot PlusPlus. SPIDERJET® surface preparation devices — Whether cleaning, paint stripping, or de-coating large steel structures such as ships, tanks, or vessels, the SPIDERJET® surface preparation equipment delivers fast and clean results and, thanks to compact versions, can be maneuvered even through the narrowest areas. Minimal setup times ensure rapid deployment, and the use of high-pressure water without additives or chemicals protects the environment. High coverage rates and semi-automatic operation reduce working time and costs while increasing work safety.

Condition: new, Year of construction: 2024, operating pressure: 250 bar, total length: 878 mm, high-pressure hose length: 10,000 mm, total height: 702 mm, total width: 538 mm, empty load weight: 57 kg, fuel: super 95, warranty duration: 24 months, We offer for sale the HD 9/25 G Classic petrol-powered high-pressure washer. Condition: New Year of manufacture: 2024 Technical specifications: - Pump performance (l/h): 900 - Working pressure (bar): 250 - Maximum pressure (bar): 300 - Water connection: R 3/4″ - Drive type: petrol - Engine type: G390FA Fpodpfx Aaox At R Ejljg - High mobility - Colour: anthracite - Weight with accessories (kg): 56.8 - Dimensions (L x W x H) (mm): 878 x 538 x 702 Scope of delivery: - Standard spray gun - 10 m high-pressure hose - Crankshaft pump with ceramic pistons - Power nozzle - Protection frame - Water filter Features: Independence - No reliance on external power sources. - Compliant with EU STAGE V emission standards. - Convenient manual start. High mobility - Puncture-proof wheels. - Compact and easy to manoeuvre in confined areas. - Fits inside a vehicle. Robust and durable design - Sturdy tubular frame protects the pump from damage. - High-pressure pump equipped with a safety valve and water filter. - Crankshaft pump with ceramic pistons. Accessory storage - Holder for power leads and accessory compartment for easy storage and transport. - Ergonomic handle and convenient hose storage. The HD 9/25 G Classic cold-water high-pressure cleaner, with a working pressure of up to 250 bar, a delivery rate of 900 litres per hour, and a durable crankshaft pump, is designed to handle even the most demanding cleaning tasks. Its high-performance EU STAGE V petrol engine eliminates the need for external power sources. Sturdy tubular steel frame and puncture-proof tyres make it ideal for challenging tasks on construction sites, in industry, municipal areas, or service companies in the construction sector. The ergonomic handle, very compact dimensions, and dedicated accessory holders (e.g., for high-pressure hose and lance) simplify operation and allow for easy transport by vehicle. All major components are easily accessible for servicing and are effectively protected by thermal and safety valves. Please note: The machine does not support suction from alternative water sources.

Condition: new, Year of construction: 2025, functionality: fully functional, operating pressure: 150 bar, high-pressure hose length: 10,000 mm, empty load weight: 40 kg, warranty duration: 24 months, input frequency: 230 Hz, SPECIFICATION: Model: KPC-3.5P Code: K8.011.0051 Voltage/Hz: 230/50 Pressure (Bar): 120/150 max Flow Rate (L/h): 660 Power (W): 3000 Motor: Induction RPM: 1450 Fodpfsw Iccisx Aalspg PREMIUM CRANKSHAFT PUMP BRASS HEAD WITH INTEGRATED BYPASS VALVE 18 mm CERAMIC PISTONS STAINLESS STEEL INLET AND OUTLET VALVES INDUCTION MOTOR WITH THERMAL PROTECTION AND COPPER WINDINGS STOP&GO FUNCTION EQUIPPED WITH PROFESSIONAL ACCESSORIES FEATURING 4 NOZZLES WITH DIFFERENT SPRAY ANGLES FOR REMOVING ALL TYPES OF CONTAMINANTS AND SURFACES INCLUDES A PRACTICAL ACCESSORY HOLDER AND A PROFESSIONAL BRAIDED HOSE Why choose a crankshaft pump with ceramic pistons? - The crankshaft pump is a solution renowned in industrial applications. Its robust design ensures a significantly longer service life compared to more affordable washers equipped with axial or rotary pumps. - Ceramic pistons offer exceptional resistance to high temperatures and wear, providing reliable and quiet operation for years. - Thanks to this construction, the unit can be used in continuous operation mode without the risk of overheating or excessive component wear.

Condition: new, Year of construction: 2025, functionality: fully functional, operating pressure: 200 bar, high-pressure hose length: 10,000 mm, empty load weight: 56 kg, warranty duration: 24 months, input frequency: 400 Hz, SPECIFICATION: Model: KPC-5.5TP Voltage/Hz: 400/50 Pressure (Bar): 200 Flow Rate (L/h): 900 Power (W): 7200 Fpedew Ickajpfx Aalsg Motor: Induction RPM: 1450 PREMIUM CRANKSHAFT PUMP BRASS HEAD WITH FLANGED BYPASS VALVE CERAMIC PISTONS, DIAMETER 18 mm STAINLESS STEEL SUCTION AND DELIVERY VALVES THREE-PHASE INDUCTION MOTOR WITH THERMAL PROTECTION AND COPPER WINDINGS EQUIPPED WITH PROFESSIONAL ACCESSORIES, INCLUDING 4 NOZZLES OF DIFFERENT SPRAY ANGLES TO HANDLE ANY TYPE OF DIRT AND SURFACE FEATURES A PRACTICAL HOLDER FOR ACCESSORY STORAGE AND A PROFESSIONAL BRAIDED HOSE Advantages of a crankshaft pump with ceramic pistons: - Precise operation and very high efficiency – these pumps are indispensable in environments where reliability over many hours of daily operation is crucial. - Minimal component wear – ceramic pistons are far more durable than steel ones, so they require less frequent servicing. - Resistance to chemicals and variable temperatures – they perform excellently even when working with aggressive chemicals and hot water. - Smoother operation – the pump runs more quietly and generates less vibration, improving operator comfort. Low-speed Motor – Professional design: - 1450 RPM ensures lower component wear and reduced noise emissions. - Designed for heavy-duty operations, ideal for tasks requiring continuous and extended use.

Condition: new, Year of construction: 2025, functionality: fully functional, operating pressure: 230 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, warranty duration: 24 months, SPECIFICATION: Model: KPC-7.5TP Voltage/Hz: 400/50 Max Pressure (Bar): 230 Flow Rate (L/h): 1080 Power (W): 10,000 Motor: Induction RPM: 1450 PREMIUM CRANKSHAFT PUMP BRASS HEAD WITH FLANGED BYPASS VALVE CERAMIC PISTONS, 18 mm DIAMETER STAINLESS STEEL SUCTION AND DELIVERY VALVES THREE-PHASE INDUCTION MOTOR WITH THERMAL PROTECTION AND COPPER WINDINGS PROFESSIONAL ACCESSORIES INCLUDING 4 NOZZLES WITH DIFFERENT SPRAY ANGLES FOR ALL TYPES OF SURFACE AND CONTAMINANT EQUIPPED WITH A PRACTICAL ACCESSORY HOLDER AND A PROFESSIONAL, BRAIDED HIGH-PRESSURE HOSE Fpedsw Icn Sopfx Aaljg Crankshaft pump with ceramic pistons – uncompromising quality: - This pump type represents the top tier among pressure washers – ensuring reliability, precise operation, and long service life. - Ceramic pistons are highly resistant to wear, significantly extending maintenance intervals. - Ideal for continuous use – with no performance loss, even after many hours of daily operation. Low-speed motor – built for extreme workloads: - Operates at 1,450 rpm, minimizing mechanical wear. - Powerful, efficient, and properly cooled for demanding, all-day applications.

Condition: new, Year of construction: 2024, operating pressure: 140 bar, total length: 800 mm, total height: 1,700 mm, total width: 1,000 mm, water tank capacity: 95 l, power: 3 kW (4.08 HP), temperature: 45 °C, TurboClean Evo II is a professional high-pressure washer made of stainless steel. The washing process takes place in closed circuit with water with special detergent with max. temperature 45oC. Working pressure is 140 bar, thereby hard to reach places and heavily soiled items of carbon deposits, grease or oil can be thoroughly washed. The flap is equipped with pneumatic drives, to increase the safety and the quality of work the washing machine. It is also equipped with oil skimmer, a brush and an air gun. There are cleaning nozzles installed on the window, which improve visibility and ease of work. Fpjdpfx Aaoq Ru Amoljg It is a perfect solution for workshops and parts remanufacturing. Manufactured in Poland.