Used High Pressure Air for sale (47,960)

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump -Drive: 0.75 kW 2810 rpm -Max. flow rate: 9.0 m³/h -Max. pressure: 18 mWS -Quantity: 1 available -Dimensions: 380/225/H565 mm Lhsdpjcxq Atsfx Abzol -Weight: 36 kg

Condition: new, Year of construction: 2024, functionality: fully functional, operating pressure: 6 bar, total height: 1,270 mm, total width: 1,500 mm, pressure: 6 bar, type of input current: AC, empty load weight: 300 kg, input voltage: 230 V, heating capacity: 9 kW (12.24 HP), water tank capacity: 300 l, rotary table diameter: 1,000 mm, table load: 300 kg, table width: 1,000 mm, The ROT1000 rotary basket washer is a combination of modern technology and precision workmanship at every stage of the washer's development - this is, in short, the definition of an innovative design that will facilitate the process of washing large-size parts. The rich equipment of the device will provide us with high efficiency, economy and reliability at the workplace. A motor-driven rotary basket and spray nozzles increase the efficiency of the washing process. Parts undergoing the process are placed on a circular basket that rotates around its own vertical axis. The fully automatic control panel controls the work of the washer. STANDARD EQUIPMENT OF THE WASHER: - Sensor for disconnection of the closing lid when opening it during the washing process, Lodpfxjq I N S He Abzehl - Liquid level sensor in the tank, protecting against dry operation, - Liquid temperature sensor, - One adjustable, stainless steel spray arm from the renowned spraying company System - Mechanically rotating basket, - Dual filtration, - Coarse insoluble impurities filter (1mm mesh filter), - Drain valve

Condition: as good as new (ex-display), Year of construction: 2025, High-pressure cleaning unit, high-pressure flushing unit, high-pressure built-in unit on hot-dip galvanized and painted high-quality steel frame with forklift pockets, suitable for installation in service vehicles. PTC Salmon, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/200 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW Salmon 75/150 | 75 l/min at 150 bar | Engine: Vanguard 35 HP 26 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Vanguard 35 HP 26 kW Salmon 45/240 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW DIMENSIONS / WEIGHT: Dimensions without water tank (L x W x H): approx. 760 x 1,250 x 1,200 mm Dimensions with 400 l water tank (L x W x H): approx. 1,220 x 1,250 x 1,200 mm Dimensions with 800 l water tank (L x W x H): approx. 1,670 x 1,250 x 1,200 mm Empty weight without water tank: approx. 300 kg Empty weight with 400 l water tank: approx. 320 kg Empty weight with 800 l water tank: approx. 350 kg HIGH-PRESSURE PUMP:  Manufacturer: HPP  Model: CLW ENGINE:  Manufacturer: Vanguard  Model: 35 HP  Fuel: Gasoline  Max. Output: 35 hp (26 kW) CONTROL PANEL:  Start button  Operating hour counter  Electronic fuel gauge  LED display for oil temperature  LED display for low lubricating oil pressure  LED display for clogged air filter  LED display for engine speed  LED display for generator  LED display for spark plugs  Emergency stop button ELECTRICAL CONTROL:  Winding/unwinding of hydraulic hose reel;  On/Off bypass;  Engine speed control +/-;  Emergency stop button;  Switching to wireless remote control; INSTALLED ALARM:  Water shortage protection against dry running of the high-pressure pump with automatic shut-off function. SAFETY AND PRESSURE REGULATING VALVES:  The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH-PRESSURE HOSE REEL:  Type: Electric hose reel  Material: Stainless steel  Capacity: max. 80 m ½“ and 80 m 3/8" high-pressure hose  Hose: 80 m ½“ high-pressure hose (included)  Hose guide: manual LOW-PRESSURE WATER SUPPLY HOSE REEL:  Type: manual hose reel  Material: Stainless steel  Capacity: max. 35 m ¾“ low-pressure hose  Hose: 35 m ¾“ low-pressure hose (included) WATER FILTER:  With washable cartridge and drain valve.  Filtration degree: 50 Mesh INCLUDED IN DELIVERY:  Multi-function wireless remote control IMET; - On/Off motor; - On/Off bypass; - Engine speed control +/-; - Winding/unwinding of hydraulic hose reel; - Emergency stop button;  Battery charger for wireless remote control;  300, 400, 500 or 800 l (with steel frame) water tank made of polyethylene; OPTIONAL ON REQUEST:  Pulsation/booster pump;  50 or 60 m ½“ high-pressure hose;  50, 60 or 80 m 3/8“ high-pressure hose with G3/4“ connection; ACCESSORIES ON REQUEST:  STORZ kit for connection to the water hydrant;  UNI 45 kit; Lhsdpfx Ajf Arugsbzol  Version with 2 HD hose reels;  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint and quick coupling;  High-pressure lance kit with flat jet nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispenser kit;  Step cleaning device;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles;  Other accessories on request.

Condition: good (used), Year of construction: 1987, functionality: fully functional, tank capacity: 50,000 l, total height: 10,000 mm, outer diameter: 2,800 mm, overall weight: 10,200 kg, wall thickness: 15 mm, manhole location: side, operating temperature: 60 °C, operating pressure: 12 bar, 3 compressed air tanks are available. Lhedpfez Ahqaox Abzol !! Price per unit, net !! Capacity: 50,000 liters (50 m³) Diameter: 2.8 m Height: 10.0 m Empty weight: 10,200 kg Wall thickness: 15 mm Operating pressure: 12 bar Test pressure: 16.3 bar Year of manufacture: 1987 The internal condition is very good, and they could continue to be used as compressed air tanks. Tank documentation is also available. We will handle the dismantling and loading. Transport can be arranged. The stated selling price is net and per unit !!

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaner PTC Easypower L B, similar to but not a Dynajet, Oertzen, Falch, Woma, Kamat, or Denjet. - Operating pressure: 200-700 bar - Flow rate: 13-42 l/min - Engine: Kohler Stage V Diesel, 35 HP / 26 kW, 3400 rpm - Dimensions: 1,370 x 850 x 1,020 mm - Dry weight: approx. 260 kg - High-pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame made of painted steel with corrosion protection - Covers made of stainless steel Lhsdpfjfdzy Uox Abzol - Holder for gun with lance - Trolley with 4 industrial wheels, 350 mm - Electric starter - Operating hour counter - Incl. 20 m high-pressure hose with stainless steel quick-release couplings, spray gun, lance, and flat spray nozzle 15° The following models are available: Easy Power L D 16/500 | 16 l/min. 500 bar Easy Power L D 23/350 | 23 l/min. 350 bar Easy Power L D 20/400 | 20 l/min. 400 bar Easy Power L D 30/280 | 30 l/min. 280 bar Easy Power L D 42/200 | 42 l/min. 200 bar Easy Power L D 13/700 | 13 l/min. 700 bar

Condition: new, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 5,500 kg, color: white, gearing type: automatic, number of seats: 1, total length: 7,336 mm, total width: 2,001 mm, Year of construction: 2025, Equipment: air conditioning, central locking, had accident, parking heater, soot filter, Sprinter 519 4x4 with M3 Preparation Optional partition wall and choice of single or double passenger seat can be supplied upon request. Lhjdpfx Aoz D Ix Robzol 4 identical vehicles available Special equipment includes: - Active Distance Assist DISTRONIC - Exterior mirrors without integrated indicator - Front side indicator lamps - Omission of load compartment/sliding door - Tachograph controls located front under headliner - No passenger side airbag - No load compartment partition wall - No seat in cab, right side - No lashing eyes - Exterior noise reduction features - Speed limiter set at 100 km/h - Grab handles on A-pillars - Partial LED rear lamps - Hold function - Interior: instrument panel air vents - Flip lid for storage compartment - Dashboard charging package (additional USB ports and 12V socket) - Cable duct at rear portal - Cable duct on sidewall - Heated steering wheel - Fog lights with cornering function - Programmable special module - Park package with reversing camera - Interior rearview mirror - LED High Performance headlights - Rear and front mud guards - Driver’s seat heated - Driver’s seat with lumbar support - Comfort suspension seat for driver - Low seat base for driver’s seat - Rear door step - Rear underride guard - Cab heat insulation - Additional electric auxiliary air heater - Additional water heater Additional features: - 3rd brake light - Overhead storage above windscreen - Storage compartment below passenger dashboard - Adaptive brake light - Driver airbag - Acoustic package - Hill-start assist - Towbar wiring - trailer socket electrics - Power folding exterior mirrors - Electrically adjustable & heated exterior mirrors (both sides) - Blind spot assist for exterior mirrors - Outside temperature indicator - DAB tuner (digital radio) - Load compartment ceiling light with door contact - Automatic headlight activation - Rear right entry grab handle - Grab handle for sliding door at partition wall - Safety assist: turning assistant - Safety assist: active brake assist - Safety assist: active lane keeping assist - Safety assist: start info assistant - Safety assist: Attention Assist (drowsiness detection) - Safety assist: Intelligent speed assistant - Safety assist: breakdown management - Safety assist: crosswind assist - Digital tachograph - 250A alternator - 9-speed GTronic automatic transmission - Rear doors (opening angle 270 degrees) - Body/type: high roof box with extended rear overhang - Instrument cluster with color display - Communication module (LTE) for digital services - Main fuel tank: 93 litres - Steering column adjustable (manual) - Multifunction steering wheel - Truck registration (N1 category) - Side marker lights - Mercedes-Benz emergency call system - Engine: 2.0 L – 140 kW CDI Euro 6 - MBUX multimedia system (10.25" touchscreen) - 4325 mm wheelbase - Tyre pressure monitoring system - Reversing camera - Euro VI emissions standard - Windscreen wipers with rain sensor - Seatbelt warning system (driver and passenger side) - Fabric seat upholstery - Engine start/stop system - Mid-dashboard USB charging port - 92 Ah AGM battery - Navigation pre-installation (for MBUX) - Remote Service Plus pre-installation - Heat-insulating glass (windscreen with top band filter) - Permissible gross weight: 5.2 t - Rain sensor We can...

Condition: as good as new (ex-display), Year of construction: 2026, The CE08 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotary nozzles, chemical injectors, and a sandblasting kit. It is similar to, but not a Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE08-series L/min CE08-200 bar 15 7.5 hp water blaster unit 50Hz CE08-200 bar 15 7.5 hp water blaster unit 60Hz CE08-200 bar 15 7.5 hp water blaster unit 50Hz with start/stop CE08-200 bar 15 7.5 hp water blaster unit 60Hz with start/stop Lhjdohf Nakjpfx Abzol General specifications: ----- Drive motor power: 6.0 kW Volt: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

Condition: used, This listing is for a Jun-Air OF302 Application Ljdpfxsxzg Rvo Abzehl Oil-free compressor 25 liter pressure vessel mounted on frames incl. 5 micron filter regulator with auto-emptied water several withdrawal options for compressed air adjustable rubber mounts flexible applications can also be used for retrofitting existing systems horizontal mounting manner possible ideal for installation in OEM applications 2-frequency driving motor Technical Data Suction - 108 l / min Delivery performance - 38 l / min at 8 bar Volume - 65 dB (A) Cylinder per compressor - 2 Pressure container volume - 25 l Permissible ambient temperature - + 1 ° C to + 40 ° C Supply voltage - 230 V, 50 Hz Engine Power - 0.44 kW Current consumption - 4.1A Thermal protection - Integrated Duty - 100% Weight - 28 kg Dimensions (LxWxH) - 380 x 380 x 610 mm

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, - High-pressure cleaner PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam – similar, but not a Dynajet, Oertzen, Falch, etc. - Cold water / hot water / steam 32 bar up to 140°C / high-pressure steam 150 or 200 bar up to 150°C for cleaning and disinfecting. Ledpfxefh Skas Abzjhl The following models are available: - TORPEDO MINI-E 3.8 M 230 Volt/50 Hz Powersteam, 8 l/min at 150 bar - TORPEDO MINI-E 5.8 T 400 Volt/50 Hz Powersteam, 8 l/min at 200 bar - Dimensions and empty weight: 110x64x98 cm, approx. 150 kg - Includes 10 m high-pressure hose, spray gun, lance, and flat spray nozzle 25°.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, operating pressure: 200 bar, total length: 1,100 mm, high-pressure hose length: 10,000 mm, total height: 850 mm, total width: 670 mm, pressure: 200 bar, empty load weight: 20 kg, fuel: super 95, overall weight: 80 kg, warranty duration: 12 months, power: 8.09 kW (11.00 HP), pressure (max.): 200 bar, water pressure: 200 bar, Equipment: chassis, The BMK series high-pressure cleaners are powered by a Honda gasoline engine and therefore do not require an external power connection. They offer maximum mobility and flexibility for work in areas with limited infrastructure. These devices are particularly characterized by their simple and, as a result, durable design. The machine can optionally be equipped with an electric starter (E-start). Included accessories: - 10 m high-pressure hose DN10, with kink protection on both sides - HP350 Soft CL high-pressure gun with swivel joint at the inlet - CL twin nozzle with nozzle protection, including flat jet high-pressure nozzle Lhedjzd Uawjpfx Abzol Dimensions: 1100 x 670 x 850 mm Weight: 80 kg Available models: BMK 160-25 | 160 bar | 25 l/min BMK 200-20 | 200 bar | 20 l/min BMK 250-15 | 250 bar | 15 l/min

Condition: good (used), Year of construction: 1970, Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, compressor tank, compressed air reservoir, compressed air storage tank, compressor tank Lhedpfx Abjzyt Avezol -Manufacturer: Elektra-Beckum, compressed air tanks, compressed air storage -Contents: 1000 L -Operating pressure: 11 bar -Dimensions: 900/1000/H2350 mm -Weight: 322 kg

Condition: ready for operation (used), machine/vehicle number: 838 621, minimum pressure: 180 mbar at intake capacity: 2.2 m³/min outlet nozzle diameter: 50 mm Lododzw I Nepfx Abzehl speed: 2780 rpm drive motor: 220/380 V, 0.95 kW space requirement: 510 x 350 x 480 mm

Condition: excellent (used), Year of construction: 1998, Ultrafilter Laserpac LP ​​0072 Compressed Air Treatment Dryer Industrial adsorption dryer and CO₂ purifier from premium manufacturer Ultrafilter (Donaldson) This unit was specifically developed for applications requiring ultra-high-purity compressed air—ideal for operating laser cutting systems, as well as for use in the pharmaceutical, food, and electronics manufacturing industries. Using a 5-stage process, the system not only removes moisture but also highly efficiently purifies the compressed air of oil vapors, particles, and carbon dioxide (CO₂). Technical specifications at a glance: - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Power supply: 230 V / 50 Hz - Medium: Compressed air - Volume flow (at 5.5 bar g): Inlet approx. 36.3 m³/h | Outlet min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g - Temperature range (medium/ambient): max. 40°C - CO₂ purification: Inlet max. 1000 ppm → Outlet max. 100 ppm - Vessel test pressure: 20.8 bar - Year of manufacture: 1998 Dimensions: (H x W x D) 2000 x 600 x 800 mm We would be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request! Ledozwl Hzepfx Abzehl

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total width: 2,490 mm, total height: 2,700 mm, The M.A.L. Mechatronic industrial vacuum cleaner is a mobile, high-performance suction and recovery system for abrasive blasting media and industrial waste. The system operates with a powerful vacuum technology, generating up to 650 mbar of negative pressure, and achieves air flow rates of up to 5,700 m³/h. The integrated H13 filter technology with a separation efficiency of 99.995% ensures the safe removal of even the finest dust particles. The robust steel frame construction allows for use under demanding industrial conditions. The system is particularly suitable for blasting and surface treatment processes where abrasive blasting media should be economically recovered and reused. Lhedpfozarwgjx Abzsl Immediate purchase possible. Rental available, daily or monthly, upon request.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale are 2 industrial air filters of the Air-Fresh-Service brand and type F-V15D Lhsdpot Tyqmsfx Abzol The units are in very good condition and fully functional Units can be purchased individually or as a package, individual prices will be quoted on request Technical data: Year of construction: 2016 V/Hz: 400/50-60 A1,9-1,5 kW: 1.15 Structure: 2 filter chambers with 3 filters each On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: new, Year of construction: 2025, Viber-Air Power: 7.5 kW / 7.5 HP Motor speed: 3000 rpm Tank capacity: 500 liters Voltage and frequency: 400V / 50Hz Water resistance: IP23 Noise level: 65 dB Operating pressure: 10 bar Air flow: 800 l/min. Drive type: direct drive Outlet diameter: G 3/4 Dehumidifier: TR-10HP Cooling: Air Screw manufacturer: BAOSI Inverter: Included Display: HTK070 Dimensions (length/width/height): 1900/800/1660 mm Weight: 390 kg Lodpjxdbvrofx Abzshl Suction capacity: 950 l/min Discharge capacity: 800 l/min

Condition: new, Year of construction: 2026, Display Model: COMPRESSED AIR REFRIGERANT DRYER ALMIG ALM-DGO 365 with time-controlled condensate drain Lodoz Egtispfx Abzehl Type: ALM-DGO 365 Volume flow rate: 6.08 m³/min* Year of manufacture: 2026 Constant pressure dew point of +3°C to +5°C for maximum process reliability. Minimal pressure drop ensures immediate energy savings. Short start-up and response times guarantee rapid availability. Optimized heat exchanger design for maximum efficiency. Robust construction for reliable continuous operation. Refrigerant R513a: efficient, eco-friendly, and durable. Compact footprint / Space-saving design. Technical Specifications: Max. operating pressure: 16 bar Max. inlet temperature: 70°C Min./max. ambient temperature: +5°C to +50°C Average power consumption: 0.94 kW Voltage / Frequency: 230V / 50Hz Compressed air connection: 1 1/2" Dimensions (L x W x H): 527 x 627 x 1123 mm Weight: 74 kg Financing & Showroom: Convenient leasing options via our partner bank are available for new machines. Feel free to visit our showroom / retail store. We constantly stock a wide selection of new and used compressors!

Condition: new, functionality: fully functional, operating pressure: 150 bar, empty load weight: 198 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 140 °C, KRANZLE THERM 1017 TR TECHNICAL DATA: Model: KRANZLE THERM 1017 TR Manufacturer: KRANZLE Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 1000 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 140 Operating pressure (bar): 150 Maximum pressure (bar): 150 Connected power (kW): 5.5 Weight with accessories (kg): 198 Fuel tank capacity (l): 35 Dimensions (L x W x H) (mm): 1050 x 800 x 1300 KRANZLE THERM 1017 TR WASHER EQUIPMENT KRANZLE pressure gun (M22 / quick coupler) Spray lance: KRANZLE (quick coupler) 25° flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt removal power. Integrated pressure hose reel 20m professional-grade pressure hose WHY CHOOSE THE KRANZLE THERM 1017 TR? The THERM 1017 TR is ideal for factories, workplaces, and industrial facilities. It is also successfully used by large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. Ljdpfey R Tfhex Abzjhl The THERM line emphasizes smooth operation and continuous operation, making the 1017 TR model suitable for use in a wide range of industries. Additional handles allow for transporting the unit with additional accessories. The brass pump head extends the unit's service life. A large water filter protects the pump from contaminants that may be present in the water. Standard equipment includes a high-pressure gun with lance, a 20m high-pressure hose, a reel, and a 25° power nozzle. The device also features a quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded systems. KRANZLE THERM 1017 TR RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires different locations. Additional handles allow for transporting the device with additional accessories. The brass pump head extends the device's lifespan. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. Standard equipment includes a high-pressure gun with lance, a 20m high-pressure hose reel, and a power nozzle. The device also features a quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded systems. The device is completely new.

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display. OPTIMUM F 200 HSC Premium CNC milling machine, directly from the manufacturer. F 200 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control system is characterized by its performance, speed, precision, and long service life. Heavy-duty design · High productivity · High reliability · Heavily ribbed, torsion-resistant machine base · Profile rail with recirculating roller guides for high rapid traverse speeds in all axes · Powerful servo drives in all three axes · Telescopic guide cover on all three axes · Automatic lubrication · Solid, precise milling table with five T-slots, large dimensions, and precision-ground surface · The portable, electronic handwheel with feed override button and emergency stop switch facilitates the easy execution of programs Nwswouy Tckex Eb Ncsi · Coolant system with chip flushing system and cleaning gun · Spindle internal cooling with 20 bar · Chip conveyor in belt design ensures efficient chip removal · Chip cart · RJ45 connection and power connection 230 V · Enclosed control cabinet with integrated heat exchanger ensures optimal temperature and prevents the ingress of dirt particles · Machine light in the work area · Additional package SIEMENS material defect liability and free online/on-site service OSS Plus · 1 year maintenance contract Basic included in D/A/CH Milling spindle Inline spindle Machine data Electrical connection 400 V / ~50 Hz Total connected power 20 kVA Milling spindle Drive motor S1 operation 10.5 kW Torque of drive motor S1 operation 50 Nm Drive motor S6-30% operation 26.4 kW Torque of drive motor S6-30% operation 125 Nm Spindle mounting SK 40 / DIN 69871 Coolant system Performance of coolant pumps, 3 pieces 1 kW Flow rate 35 l/min Tank capacity 200 liters Cleaning pump Performance of cleaning pump 530 W Milling accuracy Repeatability ± 0.005 mm Positioning accuracy ± 0.005 mm Tool changer Type Double-arm gripper Number of tool positions 24 Tool diameter max. 78 mm Tool diameter (auxiliary positions free) max. 120 mm Tool length 300 mm Tool weight max. 8 kg Time for tool change: Tool to tool 2.5 seconds Travel range X-axis 850 mm Y-axis 500 mm Z-axis 550 mm Feed drive Rapid traverse X, Y, Z axis 48 m/min Torque motor X/Y/Z axis 16 Nm / 16 Nm / 20 Nm Feed forces X/Y/Z axis 5.34 kN / 5.34 kN / 6.68 kN Speed range Speeds* 12,000 min-1 Pneumatics Air pressure 6 - 8 bar Air consumption per hour 6 - 8 kg/m³ Milling table Distance spindle - table 100 - 650 mm Lhedpfjzi Ex Uex Abzel Table length x width 1,000 x 500 mm T-slot size / number / spacing 18 mm / 5 / 100 mm Load capacity max. 500 kg Dimensions Length x width x height 2,400 x 2,355 x 2,860 mm Total weight 5,500 kg

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 3,000 rpm, travel distance X-axis: 630 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,585 mm, spindle motor power: 30,000 W, overall weight: 15,200 kg, controller manufacturer: FANUC, number of slots in tool magazine: 40, number of axes: 7, This 7-axis DOOSAN PUMA MX3100S was manufactured in 2012. It features an impressive maximum turning diameter of 760 mm and a turning length of 1,500 mm. The machine is equipped with a 40-tool Capto C6 automatic tool changer and offers high spindle speeds of up to 12,000 rpm. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA MX3100S horizontal turning machine we have for sale. Contact us for further details. • Bed: Cast iron with linear roller guides on all axesLeft spindle (main) • Spindle nose: ASA A2-11 • Chuck: Hydraulic 3-jaw, Ø315 mm • Max available power from: 238 rpm • Max torque: 1,003 / 1,203 Nm • Built-in spindle motor; front bearing Ø160 mm • Spindle bore: 115 mm; draw tube ID: 103 mm • C1 positioning: continuous/interpolated, 0.001° resolution, hydraulic spindle lockingRight spindle (sub) • Spindle nose: ASA A2-8 • Chuck: Hydraulic 3-jaw, Ø254 mm • Speed: 40–4,000 rpm • Motor power (low/high electronic range): 15/22 kW | 22/26 kW • Max available power from: 450 rpm • Max torque: 398 / 539 / 700 Nm • Built-in spindle motor; front bearing Ø130 mm • Spindle bore: 86 mm; draw tube ID: 77 mm • C2 positioning: continuous/interpolated, 0.001° resolution, hydraulic spindle lockingAxis travels • B (upper turret rotation): 240° (±120°) • A (right spindle translation): 1,550 mm • C1/C2 (spindle rotation): ±360°Rapid traverse / feeds • X1 / Z1 / Y: 36 / 36 / 26 m/min • A axis: 30 m/min • B-axis rotation: 42 rpm • C1 / C2 axes: 400 rpm • X1/Z1 interpolation feed: up to 500 mm/revOrientable upper turret / milling spindle • B-axis driven orientable head with Roller Gear Cam (RGC) • Machining on either left or right spindle • B-axis resolution: 0.001°; up to 4-axis simultaneous with FANUC 31i-A • Hirth mechanical locking: head orientation 5°; spindle orientation for multi-edge tools 30° • Spindle interface: Capto C6 (double-contact) • Speed: 60–12,000 rpm • Motor power (low/high electronic range): 10/15/18.5 kW | 15/18.5/22 kW • Max available power from: 1,500 rpm; max torque: 64 / 96 / 118 Nm • Built-in motor; air sensor for tool clamping confirmation • Centralized cooling system; rigid tappingAutomatic tool changer • Type: Floor-mounted, double-arm; long-Z movable magazine • Drives: Servo-driven tool-change arm and tool-chain rotation • Taper: Capto C6 • Tool change time: tool-to-tool 1.8 s; chip-to-chip 10 s • Max tool diameter: 130 mm (adjacent empty) / 90 mm (adjacent occupied) • Max tool length: 400 mmMachining capacity • Max swing over bed: 1,000 mm • Max swing over carriage: 700 mm • Max turning diameter from chuck: 670 mm (upper head at 0°) / 760 mm (upper head inclined) • Max turning length between centres: 1,500 mm Ledpsz Eaz Tjfx Abzehl • Max distance between spindle noses: 1,540 mm • Y-axis through-hole capacity: Ø230 mm (±115 mm) • Max bar capacity: left Ø102 mm; right Ø76 mm • Max unsupported workpiece weight: left 400 kg; right 220 kgCoolant and standard equipment • High-pressure coolant through upper spindle: 12 bar • External coolant to upper spindle: 8 bar • Coolant tank capacity: 580 litres • Automatic lubrication system • Centralized hydraulic system with high-efficiency cooler • Electrical cabinet with heat exchanger • Work area lighting; 3-colour alarm/status lamp • Installation equipment; CE conformity declarationFANUC 31i-A CNC features • 10.4" colour LCD; extended keyboard • Manual Guide-i conversational programming • Minimum programmable increment: linear 0.001 mm; rotary 0.001°

Condition: excellent (used), Year of construction: 2002, Ultrafilter LP 0072 Compressed Air Treatment Dryer Industrial adsorption dryer and CO₂ purifier from premium manufacturer Ultrafilter (Donaldson) This unit was specifically designed for applications requiring ultra-high-purity compressed air—ideal for operating laser cutting systems, as well as for use in the pharmaceutical, food, and electronics manufacturing industries. Using a 5-stage process, the system not only removes moisture but also highly efficiently purifies the compressed air of oil vapors, particles, and carbon dioxide (CO₂). Lsdpjzwmacsfx Abzshl Technical specifications at a glance: - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Power supply: 230 V / 50 Hz - Medium: Compressed air - Volume flow (at 5.5 bar g): Inlet approx. 36.3 m³/h | Outlet min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g - Temperature range (medium/ambient): max. 40°C - CO₂ purification: Inlet max. 1000 ppm → Outlet max. 100 ppm - Vessel test pressure: 20.8 bar - Year of manufacture: 2002 Dimensions: (H x W x D) 2000 x 600 x 800 mm We would be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: new, functionality: fully functional, operating pressure: 165 bar, empty load weight: 222 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 155 °C, KRANZLE THERM 1165-1 TR TECHNICAL DATA: Model: KRANZLE THERM 1165-1 TR Manufacturer: KRANZLE Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 3 / 400 / 50 Lhsdpfx Ajy Sf N Uobzsl Pumping capacity (l/h): 1165 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 155 Operating pressure (bar): 165 Maximum pressure (bar): 180 Connected power (kW): 6.4 / 5.0 Power cable length (m): 7.5 Weight with accessories (kg): 222 Fuel tank capacity (l): 35 Dimensions (L x W x H) (mm): 1050 x 800 x 1300 KRANZLE THERM 1165-1 TR pressure washer EQUIPMENT KRANZLE [123272] pressure gun (M22 / quick coupler) Spray lance: KRANZLE [12420] (quick coupler) 25° flat jet power nozzle [D2507]. Flat high-pressure jet with high surface coverage and good dirt removal power. Integrated pressure hose reel 20m Professional-grade pressure hose [443812] WHY CHOOSE THE KRANZLE THERM 1165-1 TR? The THERM 1165-1 TR is ideal for factories, workplaces, and industrial facilities. It is also successfully used by large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. The THERM line emphasizes smooth operation and continuous operation, making the 1165-1 TR model suitable for use in a wide range of industries. Additional handles allow for transporting the unit with additional accessories. The brass pump head extends the unit's service life. A large water filter protects the pump from contaminants that may be present in the water. The standard equipment includes a high-pressure gun with lance, 20m high-pressure hose, hose reel, and a 25° power nozzle. The device also features a D12 quick-release coupling system, allowing for 5x faster accessory changes than traditional threaded systems. KRANZLE THERM 1165-1 TR RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires repetitive use. Additional handles allow for transporting the device with additional equipment. A brass pump head extends the device's service life. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. The standard equipment includes a high-pressure gun with lance, 20m high-pressure hose on a hose reel, and a power nozzle. The device also features a quick-release coupling system, allowing for 5x faster accessory changes than traditional threaded systems. The device is completely new.

Condition: used, functionality: fully functional, mileage: 52,441 km, power: 101 kW (137.32 HP), first registration: 10/2007, overall weight: 7,000 kg, fuel type: diesel, color: white, axle configuration: 4x2, operation weight: 4,520 kg, empty load weight: 4,520 kg, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, Year of construction: 2007, Equipment: ABS, High-pressure cleaner on transporter: + Nissan + Atleon 70.14 + 52,441 km + 5-speed manual transmission Lhsdpfx Aewyvvzjbzsl + 4-cylinder Cummins diesel engine, 4462cc; 101kW, type ISBe4-140 + 3-seater + electric windows + analog tachograph + heated mirrors + rearview camera + radio/CD + rear window + driver comfort seat + warning beacons + length: 598cm + unladen weight: 4,520kg; gross vehicle weight: 7,000kg High-pressure water system: + 4-cylinder Lombardini diesel engine, type LDW 2214, 2199cc; 65 HP + General Pump, type TS1511, 3500 PSI + electric throttle control + electric hose reel rewinding + 1x high-pressure lance + 2-chamber water tank, approx. 3,000L (180cm x 200cm x 85cm) Municipal vehicle from first owner Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Condition: new, functionality: fully functional, operating pressure: 195 bar, empty load weight: 222 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 155 °C, KRANZLE THERM 895-1 TECHNICAL DATA: Model: KRANZLE THERM 895-1 Manufacturer: KRANZLE Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 895 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 155 Operating pressure (bar): 195 Maximum pressure (bar): 215 Connection power (kW): 6.4 Ledpfx Abjy R U D Sezshl Power cable length (m): 7.5 Weight with accessories (kg): 214 Fuel tank capacity (l): 35 Dimensions (L x W x H) (mm): 1050 x 800 x 1015 KRANZLE THERM 895-1 EQUIPMENT: KRANZLE [123272] pressure gun (M22 / quick coupler) Spray lance: KRANZLE [12420] (quick coupler) 25° flat jet power nozzle [D2507]. Flat high-pressure jet with high surface coverage and good dirt removal power. 10m Professional-Class Pressure Hose WHY CHOOSE THE KRANZLE THERM 895-1? The THERM 895-1 is ideal for factories, workplaces, and industrial facilities. It is also successfully used by large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. The THERM line emphasizes smooth operation and continuous operation, making the 895-1 model suitable for use in a wide range of industries. Additional handles allow for transporting the unit with additional accessories. The brass pump head extends the unit's lifespan. A large water filter protects the pump from contaminants that may be present in the water. A high-pressure gun with lance, a 10m high-pressure hose, and a 25° power nozzle are standard. The device also features a D12 quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded systems. KRANZLE THERM 895-1 RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires different locations. Additional handles allow for transporting the device with additional accessories. The brass pump head extends the device's service life. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. Standard equipment includes a high-pressure gun with lance, a 10m high-pressure hose, and a power nozzle. The device also features a quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded systems. The device is completely new.

Condition: good (used), Year of construction: 2016, High-pressure cleaner, hot water high-pressure cleaner -Manufacturer: Ehrle, Hot water high-pressure cleaner -Type: HD 1140 Electronic II Lsdpfx Aboz Duf Rjzehl -Operating pressure: 30-230 bar -Spray flow rate: 16 l/min / Steam setting: 7 l/min -Hot water output: 30-98°C / Steam setting: 150°C -Power connection: 3/PE/AC/50Hz/400V -Cleaning agent: High-pressure jet application and quantity control -Dimensions: 1200/800/H1000 mm -Weight: 225 kg