High Pressure Washing Machine / Pump

WATECH AS MS36

Condition: used, System: used piston diaphragm pump / pump Type: HMD-G-50-500 Dwedsdkdi Tjpfx Akvja Flow rate: 40.0 m3/h Pressure: 1,6 MPa

Condition: like new (used), Rotary vane bacuum pump in oil bath. Available in stock. Completely overhauled pump. With warranty. Nominal flow: 300 m3 / h at 50Hz. Final vacuum: 0,1 mbar abs. Dwodpsftzzgofx Akvoa Any clarification, do not hesitate to contact us.

Condition: used, Year of construction: 2022, operating hours: 45 h, functionality: fully functional, operating pressure: 3,000 bar, fuel: electricity, Demonstration machine, Dwjdpfx Ajxwb Egjkvea Machine available immediately. Only used for demonstrations. Only 45 hours on the hour meter. Technical condition: like new. Complete set: Robot + radio remote control + control unit + support winches. Operates with a 200 kW high-pressure pump (recommended by the manufacturer, but can be configured differently). Worldwide shipping available. Similar to, but better than: Vertidrive, Falch, Kamat, Robot PlusPlus. SPIDERJET® surface preparation devices — Whether cleaning, paint stripping, or de-coating large steel structures such as ships, tanks, or vessels, the SPIDERJET® surface preparation equipment delivers fast and clean results and, thanks to compact versions, can be maneuvered even through the narrowest areas. Minimal setup times ensure rapid deployment, and the use of high-pressure water without additives or chemicals protects the environment. High coverage rates and semi-automatic operation reduce working time and costs while increasing work safety.

Condition: new, Year of construction: 2026, Disc cutter for the efficient shredding of rejected rolls. Features: -Automatic safety locking system -Blade guard -Emergency stop pull cord -Siemens PLC Technical data: Blade length: 1500mm Cutting channel opening: 1200mm Motor power: 7.5kW Cutting force: 30 tons Machine in stock, immediately available. Dwedpfxsn Hyxls Akvsa Price and further information upon request. We will gladly provide you with a non-binding offer.

Condition: excellent (used), Well-maintained Hammelmann HDP 42, 970 bar and 16.5 litres, year of manufacture 2012. Dwjdpfx Akjxgvhnevsa

Condition: used, Year of construction: 2013, operating hours: 14 h, functionality: limited functionality, machine/vehicle number: TJ-350-20/40 KPSI //TJ-160-20/40 KPSI, total width: 1,500 mm, total length: 3,000 mm, total height: 2,500 mm, pressure: 2,800 bar, operating pressure: 2,800 bar, fuel: diesel, overall weight: 3,000 kg, rotational speed (min.): 700 rpm, rotational speed (max.): 1,500 rpm, high-pressure hose length: 60,000 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, A Bundle of 5 ea. UHP waterblast machines, c/w a vast variety of spares and accessories, as follows: 1 x High-Pressure Water Jet Unit with Deutz-MWM V-8 Diesel Engine adjustable pressure 0–1400 bar and 0–2800 bar, dump system, with plunger changeout kit as follows: 1400 bar at 99 liters/minute, and 2800 bar at 46 liters/minute. The fluid head of this pump, including stuffing boxes and valves will be used for both 1400 bar and 2800 bar. Changing pressure range between 1400 and 2800 Bar is carried out by a simple and easy plunger changeout. The unit was built in 2013 and kept operational as a backup machine, but was only used once for 14 hours at 2800 bar for a bundle heat exchanger cleaning project. This UHP machine is mounted on a zinc coated steel skid. Dwodpoxc E Trefx Akvsa The Deutz-MWM engine was purchased as a used engine, with approx. 3,000 operating hours , and was fitted in 2013 with a new Jetech UHDW high-pressure water jet pump. In addition, a large amount of accessories and spare parts are included, such as dump guns & foot valves, swivel joints, surface cleaners, rotary nozzles, high-pressure lances, nozzle inserts, seals, special tools, etc. An identical UHP waterblast unit is also available, but with a Scania V-8 engine and counting 850 operating hours at max. 1400 bar / 99 liters/minute. That unit is housed in a 20ft. container, with an 800 l Diesel Tank, a work bench /vise, Furthermore, there are 3 additional high-pressure water jet units with 110 kW power each, 2 of which have Volvo TD71A Diesel Motors, plunger changeout kits for 1400 and 2800 bar. A third unit is a Kamat K11000 with 2800 Bar OP. and a JCB Dieselmax engine. Also available is a hydraulic heat exchanger cleaning device with a rotating lance mounted on a scissor lift table, suitable for very large heat exchangers. All equipment comes from the closure of my company due to retirement. A buyer is sought for all machines and accessories as a complete package.

Year of construction: 2022, condition: new, Cable stripping machine G.R.S. 9 This incredible machine strips 33 meters cable per minute. You need 380 volts and 3 kW, but the processing capacity of about 2 mm to 80 mm, is reasonable. With a mass of 405 kg, you can move the machine short distances on it's own wheels - for longer distances a other transport method is necessary. The criteria for this machine: Very fast and reliable processing of cable thicknesses between 2 mm and 80 mm. Dwsdpfx Ashpcnqskvea Technical Data: Cutting speed: 33 Meter / min. (forward) 23 Meter / min. (backwards) Processing capacity: Ø 2 mm — Ø 80 mm Motor power: 3000 Watts Voltage: 380 Volt Weight: 405 Kg Dimensions in cm: 108 × 85 × 120 Color: blue

Condition: excellent (used), Year of construction: 2011, pressure: 13 bar, operating pressure: 13 bar, For sale: Jumag steam generator with oil burner. Gas burner available on request. The unit is in very good condition. Model DG 360. Year of manufacture: 2011. Steam output: 360 kg/h. Maximum steam pressure: 13 bar. Delivery available at extra cost. Inspection on site possible. Please contact us if you have any questions. Dwjdpfsydqxdox Akvsa

Year of construction: 2022, condition: new, Wire stripping machine G.R.S. 5 This is the second model by G.R.S., what stands on its own feet. Compared to the G.R.S. 4 this model weighs about double, has 30% more power and requires 380V for operation. Technical Data: GRS 5 10mm - 90mm Dimensions: W / H / D 78 cm / 120 cm / 84 cm Weight: app. 220 Kg Dwodohpcprspfx Akvea Cutting speed: 30 Meters p. Minute Engine: 380V / 3000W Stripping of cables with a cross section of 10 - 90 mm and an insulation thickness up to 20 mm.

Condition: used, pressure 200 t distance between columns 1600 mm max. ram stroke 600 mm dayligth 900 mm table width 1600 mm table depth 1300 mm table height 1060 mm ram surface 1600 x 1300 mm T-slots Din 650 / 22H12 rapid traverse 400 mm/s return speed 325 mm/s pressing speed 42 mm/s bei 40% mm/sec pressing speed 20 mm/s bei 100% mm/sec die-cushion pressure 800 kN die cushion stroke 150 mm speed of die cushion auf 68/ ab 225 mm/s Dsdeg S R Twjpfx Akvswa