Used Hf Welding Machine for sale (85,113)

Condition: used, Year of construction: 1975, Stock number: 2480 Manufacturer: Rade Koncar Year of manufacture: 1975 Type: 2B-1 Device number: 75271 Welding current primary: 220 V 16 kVA 92 A 380 V 16 kVA 53 A Secondary welding current 220 V 100 A 380 V 200 A Tsdpfx Aernrtrjdnef Equipment: mobile Dimensions: 500 x 700 x 600 mm weight: 120 kg

Condition: good (used), Year of construction: 2003, machine/vehicle number: 18220203, System for automated robot welding Mains voltage:3 x 400 V Mains voltage tolerance:+ /- 15 Mains frequency:50 / 60 Hz Mains fuse protection:35 A slow-blow Primary continuous current:18 - 29.5 A - 100 duty cycle Primary continuous power:13.1 kVA Power factor:0.99 Efficiency:0.9 Welding current range:MIG/MAG: 3-500 A Rod Electrode: 10-500 A TIG: 3-500 A Welding current:40 duty cycle: 500 A 60 duty cycle: 450 A 100 duty cycle: 360 A Welding voltage range:MIG/MAG: 14.2 - 39.0 V Rod electrode: 20.4 - 40.0 V TIG: 10.1 - 30.0 V Max. Welding voltage:49.2 V Open circuit voltage (OCV):70 V Dimensions (mm) H x W x D:626 x 287 x 477 mm Weights:35.6 kg Included in the scope of delivery: Power source on steel platform (RS 422 interface) Cooling unit (FK 4000-R) Fronius VR 1500 4R/W/E robot wire feed case Supply voltage 55 V DC Rated current 4 A Wire diameter 0.8 - 1.6 mm Tedoqpgntjpfx Adnjf 0.03 - 0.06 in. Wire speed 0.5 - 22 m/min 19.69 - 866.14 ipm. Torque 4 Nm Protection class IP 21 Dimensions I x w x h 405 x 208 x 205 mm 15.94 x 8.19 x 8.07 in. Weight 7 kg 15.43 Ib. Drive 4 roller drive Maximum shielding gas pressure 7 bar 101 psi. Coolant Original Fronius coolant Maximum coolant pressure 6 bar 87 psi. Welding torch Robacta Drive W/E/6.25m Hose package 6.5m Various wearing parts (e.g. pipe bends, gas nozzle, contact pieces) Suction unit with hose guide

Condition: used, From company closure: Esab LAW 400 The unit has been function tested! 350 amperes output at 60% duty cycle Welding range 30–350 amperes 4-roll wire feed Water cooling 2/4 stroke Torch 4 meters + wire + ground cable Without pressure regulator-- Dimensions in mm approx. 1400x630x1020 Tsdpfx Adsxq Rdfsnjf

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, welding current (max.): 280 A, No Warranty. For sale: VLH TR 280 C 280 AMP 400 Volts 21 steps adjustable 2/4 Step Spot welding Steel and Stainless Steel weldable Refurbished, tested, and Serviced Test welding possible Including 3 Meter Mig welding torch, earth work lead with clamp, and gas cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. Todpfxexmtc Aj Adnof We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: good (used), Inert gas welding machine with pulse function, pulse-arc welding system, MIG/MAG pulse welding system -with: 3 hose packages (1x aluminum, 1x stainless steel, 1x steel) -Max. welding power: 330 A -Equipment: remote control connection, with removable wire feed, including ground cable, gas fitting Tjded I U Dwopfx Adnof -Wire feed: 4-roller drive -Cooling: Water-cooled -Dimensions: 655/900/H1490 mm -Weight: 160 kg

Condition: good (used), Year of construction: 2009, machine/vehicle number: 48277, MIG-MAG pulse machine of the renowned manufacturer MERKLE. The machine is technically in perfect condition. All switches work and the machine welds perfectly. Only the hinge of the wire feed flap is broken. Tedpfx Ademk H Awsnjf The technical performance data is best taken from the photographed nameplate. The machine is ready for welding in our warehouse. Test welding is possible at any time. In addition, we supply all accessories and spare parts that you may need. You can download the operating instructions for the machine directly in the advertisement. Shipping possible.

Condition: good (used), Year of construction: 1987, machine/vehicle number: Kahny, Fully working Todpfx Aoxp N I Hodnef

Condition: ready for operation (used), Manufacturer: Jung Type: HF 50 Magnet table: 450x175mm Tedpfxonr E Dxs Adnsf

Condition: used, machine/vehicle number: 23500716, From business liquidation: Pulse welding system Kemppi Pro 4200 Evolution. The unit has been function-tested! 420 amperes power at 80% duty cycle. Welding range: 10-420A. Wire feed case Promig 530. MXE MLS control. 4-roller wire feed. Water cooling. 2/4-stroke operation. Torch 4 meters + wire, ground cable and pressure regulator. Dimensions in mm approx. 1260x440x1020. Tjdsxq Rcujpfx Adnof

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, warranty duration: 3 months, welding current (min.): 20 A, welding current (max.): 380 A, For sale ESS E2 4100 20-380 AMP (100% 320A) 400 Volt 50-60HZ Pulse PowerPuls Synergic 2/4 Step 4 Roller drive Pre gas Post gas Start current End current Down slope Bi level Burnbacktime Fixed programs Program memory Steel – Stainless Steel – Aluminum weldable Refurbished, serviced, and tested Including 4 Meter PRO4000 welding torch, earth work lead with clamp, gas cable, and 3 months warranty. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. Tjdpfx Adjxmtb Eenef All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Year of construction: 2007, condition: used, Technax welding machine HWS2202 from relay production / welding system for contacts semi-automatic stranded wire to contact Tjdpfxju Eqtqo Adnsf incl operating instructions inside lined with black plastic plates without cooling unit Generator Harms-Wende HW2000 welding transformer: HWT 2108-6,3 (power rating at 20% 80kVA; voltage sec. 6,3V; 2 diodes) year 2007

Condition: good (used), Year of construction: 2010, MIG MAG inert gas welding machine Esseti Query 500 c with removable wire feed case 60 % 500 AH Tjdpfst Iq Edjx Adnof 100 % 380 AH Torch MB 501 4 meter incl. pressure reducer

Condition: as good as new (ex-display), FRONIUS MAGICWAVE 5000 AC DC Scope of delivery: ➤ Fronius MagicWave 5000 (500A) ➤ Fronius FK 4000 water cooling unit Tedoxhd Tujpfx Adnsf ➤ Fronius TIG hand welding torch ➤ Fronius trolley ➤ Ground cable 3-4m ➤ Pressure regulator

Condition: reconditioned (used), Year of construction: 1994, functionality: fully functional, Model: BAS 100. Flash Butt welding Machine for Band Saw Blades. Hydraulic clamping. Annealing pyrometer. Hydraulic weld de-burring tool. Blade positioning device. Year of manufacture: 1994. Automatic annealing temperature control. Welding strip up to 100 mm. Bimetal strip up to 80 mm. Connection: 400 V. Weight: 500 kg. Dimensions (W*D*H): 1400*900*1500 mm. Tedpjw Snqmjfx Adnef Operating instructions and packing included.

Condition: excellent (used), Esab Fabricator EM 401i Technical Data: Water-cooled MIG/MAG inverter Continuously adjustable with 400 A output Duty cycle: 400 A at 60% 310 A at 100% Todpfoxq N D Rjx Adnjf Digital display on the power source 4-roll wire feeder Faricator Feed 304 2-meter intermediate hose package Includes earth cable, pressure regulator, and one spool of wire Weight: 107.5 kg Dimensions approx. 1300x500x1020 mm

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, warranty duration: 24 months, type of cooling: water, hose package length: 4,000 mm, welding current at 60% duty cycle: 180 A, welding current at 100% duty cycle: 140 A, protection type (IP code): IP23, welding current (min.): 1 A, welding current (max.): 220 A, Equipment: type plate available, For sale: OTC DTX 2200 1A – 220A 30% 220A 60% 180A 100% 140A 230V 50/60Hz Pulse – Fast Pulse (0,5-500 Hz) – Ultra Fast Pulse (500-2000 Hz) ColdTack (0,01 – 10,0 Sec) Pre gas (0,05 – 1,00 Sec) Post gas (0,5 – 25,0 Sec) Up Slope (0 – 5,0 Sec) Down Slope (0 – 8,0 Sec) Start current (5 – 220A) End current (5-220A) Tedpexk Taiefx Adnsf IP23S IEC 60974-1 IEC 60974-10 IEC60974-3 Steel – Stainless Steel Weldable Including: SR26 U/D 4M TIG Welding Torch Earth work cable 35mm² 4 Meter with clamp Gas hose Pressure regulator 24 Months Warranty Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: new, Year of construction: 2025, A compact device using the FIBER technology, designed for welding many types of metals with precision far exceeding traditional welding methods. Advanced technological solutions used in the offered welding machine allow to perform high-quality and repeatable welding welds of thin-walled materials and parts without the risk of deformation. Advantages of a laser welding machine Easy to use - thanks to the applied solutions and well-thought-out structure, the operator can start working after a short training Tjdpfsizr Rlsx Adnjf Low indirect radiation, when working, it is enough to wear protective glasses to filter strong light, Welding much faster than with traditional methods, productivity can be increased by up to 3 to 10 times Concentrated beam: slight structure change due to the small heat-affected area, The repeatability of the welds, the welding seam is nice, the welds are high strength. Very thin materials such as 0.5mm stainless steel can be welded. Option of welding with or without wire. Technical parameters Maximum power 2000W Laser wavelength 1080nm Depth of penetration (stainless steel 1 m/min) 4.57mm Depth of penetration (black steel 1 m/min) 3.59mm Depth of penetration (aluminum 1 m/min) 4.0mm Depth of penetration (brass 1 m/min) 4.0mm Welding speed 0-120mm/s Automatic Wire Feeder Ø 0.8 - 1.6mm Maximum power consumption ≤6.0kW Cooling system aqua Working voltage 400V Shielding gas consumption 20L/min Dimensions 600 x 1100 x 1100mm Weight approx. 185 kg LATEST GENERATION WELDING HEAD WOBBLE head; Automatic wire feeder included; Adjustable spot size 0-5mm; The powerful welding head allows many types of beam guidance: -, ○, ◎, ⊙, 8, ∞; Integrated connections for shielding gases and cooling system, Interchangeable nozzles allow for welding at different angles, 10 m of optical fiber that connects the head to the source, Adjustment of welding parameters directly in the head without having to go to the control panel; Full ergonomics - thanks to the light and flexible design, the head can perform welds even in hard-to-reach places; Easy to service - quick and easy replacement of the protective lens. Automatic wire feeder included The wire feeding system is synchronized with the welding machine software. The task of the feeder is to feed the filling, thanks to which the operator can focus 100% on the work of the head. Set includes laser welding machine with built-in cooling system welding gun with adjustable focus and a set of accessories Fiber laser source automatic wire feeder set of cables starter kit of nozzles and protective glasses THICKNESS OF WELDED MATERIALS Material WELDER POWER 1000W 1500W 2000W Stainless steel 0.5-3.0mm 0.5-4.0mm 0.5-5.0mm Black steel 0.5-2.5mm 0.5-3.5mm 0.5-4.5mm Galvanized steel 0.5-2.5mm 0.5-3.0mm 0.5-4.0mm Aluminum 0.5-1.2mm 0.5-1.8mm 0.5-4.0mm Brass 0.5-1.2mm 0.5-1.8mm 0.5-2.5mm

Condition: used, MIG MAg welding machine Unistep 320 with removable wire feed case with torch MB 401 incl. pressure reducer Todst Iq E Repfx Adnjf

Condition: used, functionality: fully functional, Fronius TransSynergic 450 MIG MAG Maximum welding current: 450 amperes Todpfoxnvvnox Adnef Voltage: 400 volts, 3-phase Control method: synergic with automatic wire adjustment Wire diameter: 0.8 to 1.6 mm Duty cycle: approximately 60 to 80 percent at maximum current Suitable for steel, stainless steel, and aluminium Cooling: water-cooled. Optional: Seven rolls of 1.2 mm aluminium welding wire included.

Condition: used, Spot Welding Machine SCIAKY type S0 432 NT Capacity: from 0,5 to 6 mm thick Throat depth: 380 mm Tsdpfx Aoxnk Tnednof Arm spacing: from 190 to 340 mm Arm Length: de 250 à 500 mm Pressure: 6 bars Voltage: 380 V Width: 1100 mm Depth: 500 mm Total height: 1500 mm Weight: approx 500 KG

Condition: like new (used), Year of construction: 2018, From business liquidation: Abicor welding tractor model Abi-Car 1200, year of manufacture 2018, little used—very good condition. Power supply control unit from 2020. 220 Volt operation. With accessories—as pictured. Todpoxpm S Aefx Adnof

Condition: good (used), 1 used surface grinding machine Manufacturer: Jung Model: HF 50 Technical specifications: Tedjxgbb Tepfx Adnjf - Z-axis travel: 400mm - X-axis travel: 500mm - Y-axis travel: 200mm - Table length: 720mm - Maximum spindle speed: 4000rpm - Table width: 200mm - Minimum spindle speed: 1000rpm - Transport dimensions: 2300mm x 1500mm x 1700mm (L x W x H) - Transport weight: 2000kg Equipped with: - Digital readout - Diaform device

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: 7570, 1 used: JUNG Surface and Profile Grinding Machine • Model: HF 50-R(D) • Machine No.: 7570 • Year of manufacture: approx. 1977, overhauled 06-1998 • Grinding area: 500 x 200 mm • Grinding wheel: max. 250 x 25 x 51 mm EQUIPMENT: Electro-magnetic chuck 450 x 180 mm 1 straight dresser mounted on the side of the spindle head 1 grinding wheel holder with wheel 1 universal paper band filter 1 frequency converter for speed control Leveling feet Todpfx Adjw R Tqponsf

Condition: good (used), Year of construction: 1980, TIG welding machine Messer Griesheim GW 200 DC 400 Volt Tsdstd Hhdepfx Adnef

Condition: used, functionality: fully functional, Multi-function welding machine (MIG, TIG, electrodes) Brand: Kemppi Model: Pro 3000 / Promig 500 Water-cooled unit with Kemppi PRO Cool 10 chiller. TIG/electrode welding unit Kemppi PRO TIG 410 - Kemppi TL control panel - Functions for TIG welding: pre-gas, post-gas, arc, high frequency TIG generator Kemppi Pro 3000 MIG/wire welding unit Kemppi PRO MIG 500 - Duty cycle: 500A - 60% - Kemppi ML SYNERGIC control panel - 4 feed rollers - Pulsed arc current with Synergic panel - Dedicated functions for welding steel, stainless steel and aluminum Tedpoxf Hv Hofx Adnsf Includes: - TIG welding torch - MIG welding torch - Earth cable - Gas regulator