Used Hermle U 1130 for sale (136)

Condition: ready for operation (used), Year of construction: 2003, Make: HERMLE Type of machine: C 800 U Year of manufacture: 2003 Control system: Siemens 840D Machine's weight: 9.000,- Tool holder: SK40 x-travel: 800 mm y-travel: 600 mm Nkedpfx Ahotmtxmo Het z-travel: 500 mm Speed range: 16.000 min-1 Number of tools in the magazine: 80 Pl.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 10,249 h, functionality: fully functional, machine/vehicle number: 15137, travel distance X-axis: 1,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 550 mm, table width: 800 mm, spindle speed (max.): 7,000 rpm, number of slots in tool magazine: 28, Well-maintained machine with a spindle from 2022 TECHNICAL DETAILS Longitudinal travel (X): 1,000 mm Transverse travel (Y, slide): 630 mm Vertical travel (Z, milling head): 550 mm Control: Heidenhain TNC 430 C-axis: Full-featured A-head: Manually swivelable to 0° and 90° Spindle Nsdpewmm D Nofx Ah Hokt Spindle speed (max.): 7,000 rpm Spindle type: Geared spindle with high torque in the lower speed range Special feature: Suitable for M30 synchronous thread cutting Spindle head swivel (manual): ±90° Milling spindle diameter in the front bearing horizontal/vertical: 80 / 55 mm Tool changer: 28-station Working area Milling spindle vertical - Distance from milling spindle to top edge of rotary table: 130 - 680 mm Milling spindle horizontal - Milling spindle to the rotary axis of the milling head, rotary table: 140 - 690 mm Milling spindle vertical/horizontal - Distance from the milling spindle axis to the rotary axis of the milling head: 120/110 mm NC rotary table 4th axis: Ø 800 mm Condition & Maintenance Spindle: renewed 2022 Maintenance: carried out regularly Geometry: laser measured 2022 Tool changer: lifting unit recently replaced Maintenance reports: available MACHINE DETAILS Control on: 35,165 h Machine on: 21,574 h Program run: 11,750 h Spindle on: 10,249 h Axes in motion: 10,285 h Weight: 6,500 kg Rated power (apparent power): 17 kVA Input current: three-phase EQUIPMENT - Documentation and manual - Chip conveyor - A-head with manual tilt function to 0° and 90° - Tool changer with new lifting unit - Spindle with high performance in the lower speed range, suitable for M30 synchronous threads - Maintenance and geometry reports available

Condition: ready for operation (used), Year of construction: 2000, operating hours: 14,430 h, functionality: fully functional, machine/vehicle number: 13479, travel distance X-axis: 875 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 300 kg, rotary table diameter: 500 mm, spindle speed (max.): 7,000 rpm, Machine can be shipped free of charge for €1,850 net! TECHNICAL DETAILS Control: Heidenhain TNC 410 Travel X / Y / Z: 875 / 500 / 500 mm Quill stroke: 75 mm Table Njdpfx Ahevn Si Is Hskt NC rotary table: 500 mm C-axis: 360° B-axis: ± 30° Speed: 11 rpm Resolution: 0.001° Part accuracy: ±15'' Table load: 300 kg Drive Drive power (100% / 40% duty cycle): 7.5 / 11 kW Torque (100% / 40% duty cycle): 266 / 390 Nm Speed: 20 - 7,000 rpm Vertical milling head Quill stroke (vertical and transverse): 75 mm Swivel range: 0 - 90° Feed drives Feed forces X, Y and Z: 8,000 N Rapid traverse: 15 m/min Diameter and pitch of the feed spindles: 32 / 10 mm Measuring system Direct position measuring system, resolution: 0.0001 mm Position tolerance Tp in X-Y-Z axis according to VDI/DGQ 3441: 0.010 mm Tool system Spindle cone: SK 40 (similar to DIN 2079, for tool holders according to DIN 69871 A) Number of tool positions: 16 pieces Tool diameter: 80 mm Tool diameter with free adjacent positions: 100 mm Tool length: 250 mm Tool weight: 6 kg MACHINE DETAILS Operating voltage: 400 V / 50 Hz Total power: 14 kVA Weight: 4,800 kg Dimensions: 3.0 x 2.3 x 2.2 m Control switch-on time: 50,052 h Program run: 15,142 h Spindle switch-on time: 14,430 h Coolant system Tank capacity: 120 l Flow rate at a flow pressure of 3 bar: 24 l/min

Condition: ready for operation (used), Year of construction: 2002, operating hours: 28,384 h, functionality: fully functional, machine/vehicle number: 15594, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, swivel angle A-axis (min.): -90 °, swivel angle A-axis (max.): 20 °, TECHNICAL DETAILS Control: Heidenhain iTNC 530 X-axis: 600 mm Y-axis: 450 mm Z-axis: 450 mm A-axis rotation range: +20° / -90° C-axis rotation range: 360° Rotary table diameter: 280 mm Spindle data Spindle mount: HSK A 63 Tool changer: 30 positions Nksdpfx Ajvytgfjh Hst Feeds and speed Feed range: 1 - 30,000 mm/min Rapid traverse speed: 35 m/min MACHINE DETAILS Machine weight: approx. 6,500 kg Control switch-on time: 64,299 h Machine switch-on time: 61,676 h Program run: 29,320 h Spindle hours: 28,384 h Drive hours: 37,893 hours

Year of construction: 1997, condition: ready for operation (used), X-travel: 630mm, y-travel: 500mm, z-travel: 500mm, table diameter: 900x528mm, NC rotary table diameter: 500mm, connected load: 14kVA, length: 3600mm, width: 3900mm, height: 2100mm, weight: 6t, with documentation. Nedolc N Stepfx Ah Hekt

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Model: UWF 902 S Year of manufacture: 1995 Operating hours: 65,071 Control system: HEIDENHAIN TNC 426 Working range X/Y/Z: 600 x 450 x 500 mm Spindle speed range: 20 - 6,300 rpm Nedpfxjv Rxa Sj Ah Hskt Tool holder: SK 40 M & H 3D probe (for workpiece measurement) Vertical-horizontal milling device Quill Coolant system Angle table: 900 x 458 mm Weight: 4,000 kg Machine dimensions LxWxH approx.: 3,900 x 2,000 x 2,000 mm ä21126

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Nkjdev Rpr Sspfx Ah Hst Model: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control: HEIDENHAIN TNC 426 Travel X/Y/Z: 600 x 450 x 500 mm Swivel table: 900 x 458 mm Renishaw 3D probe Speed range: 20 to 6,300 rpm Tool holder: SK 40 Coolant tank Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 18,000 rpm, overall weight: 12,500 kg, We offer in very good condition Hermle C42U Dynamic with following options: Nkodpfx Asya I Dish Hjt Dynamic variant with Ø800 x 630 table Internal coolant with paperbelt filter Heidenhain Touchprobe Blum Laser

Condition: not inspected (used), x-travel 850 mm y-travel 440 mm z-travel / mm Nksdpfxjud Illj Ah Hot Control TNC 355C

Condition: used, Year of construction: 1996, x-travel 850 mm Nsdpfsuxfz Ajx Ah Hjkt y-travel 630 mm z-travel 500 mm Control Heidenhain total power requirement 16 kW dimensions of the machine ca. 5 x 4,2 m

Condition: excellent (used), functionality: fully functional, Universal milling machine Hermle UWF 802M with HS 401 path control GREAT CONDITION!! Technical data: Nedpfx Ahev Ed U Do Hskt >> Year of manufacture approx. 1995 Machine no. 10212 >> Rigid angle table >> Speed: 17 to 3550 rpm >> Feed continuously variable in 3 axes from 0 to 1600 mm/min >> Drive power: 6 KW >> Travels X/Y/Z: 500/430/400 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1800 kg >> Dimensions length 1.8 m, width 1.8 m, height 1.9 m Accessories and equipment: >> HS 401 line control >> Hydraulic tension vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions for the control and programming examples About the machine : A Hermle UWF 802M tool milling machine with HS401 path control is on offer. This universal milling machine is in very good condition. A very easy-to-use path control. Length and radius corrections are possible in the program. No major CNC knowledge is required for this. Of course, the Hermle can also be operated manually without a control. The machine also has hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal is very easy by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Hermle was mechanically and electrically tested by us. Take the opportunity to view and try out the Hermle on site under power.

Year of construction: 2004, condition: excellent (used), used machining center Brand: Hermle Model: U740 Year: 2004 Serial No.: 16716 Weight: 7300kg Power: 26KVA CNC: Heidenhain iTNC 530 Type: 4 + 1 axis (Spirsin model 8117CF/225) 16 tool charger. General technical data: Fast forwards: - X axis: 30m/min. - Y axis: 30m/min. - Z axis: 20m/min. - Axis B: 15 rpm. Tours: - X axis: 915mm / 895 to 915mm (Tool holder head -5º to 90º / Tool holder head > 50º to 95º) - Y axis: 500mm (In all positions of the tool holder head) - Z axis: 500mm / 470mm (Tool holder head 90º-95º) Positioning precision in the 3 axes 0.010mm (Temperature at 20º) Maximum load on table: 700kg Table measures: 900x500mm Spindle rpm: 12,000rpm Hollow Shaft Water Cooled Spindle Motor Milling head with automatic degree rotation from -5º to +95º sk 40 tool clamping system Nedjktkdbjpfx Ah Hekt 16 tool magazine - Maximum tool diameter: 80mm - In case of adjacent free posts maximum tool diameter 100mm - Maximum tool length: 250mm - Maximum tool weight 6kg Cooling system by coolant with a 210L tank and a flow rate of 30Ltrs./min. It has an electronic control for manual handling of the machine. Chip collector: - Brand: BMF - Model: SPE 63/12-300 Z600 - Year: 2004

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 35,000 m/min, rapid traverse Z-axis: 35,000 m/min, workpiece weight (max.): 200 kg, total length: 500 mm, total width: 400 mm, table load: 200 kg, rotary table diameter: 280 mm, Coolant system Filtration tank HR 410 Handwheel iTNC530 controller 1e owner machine Nkedpfx Ahjx R S Sme Het X - Travel: 600mm Y - Travel: 450mm Z - Travel: 400mm A - Axis: 110° B - Axis: 360° Table Length: 500mm Table Width: 400mm Table load: 200 Table Ø: 280mm Feed rate X-Axis: 35000mm/min. Feed rate Y-Axis: 35000mm/min. Feed rate Z-Axis: 35000mm/min. Feed rate A-Axis: 10Degrees/min Feed rate B-Axis: 15Degrees/min Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 3500mm Width: 3500mm Height: 2800mm Weight: 6600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2003, For technical data, see images.... Nedpsx R S R Njfx Ah Hokt

Condition: good (used), Year of construction: 1983, functionality: fully functional, Universal Production and Tool Milling Machine Type: UWF 700 PH Machine No.: 5670 Serial No.: 034650 Year of manufacture:1983 Control system: Positioning and path control incl. display Nkjdpfx Ahex Ry Ate Hjt HEIDENHAIN TNC 135 3-axis manual input control TECHNICAL DATA Working area X-axis (longitudinal) manual/automatic: 410/390 mm Y-axis (transverse) manual/automatic: 310/290 mm Z-axis (vertical) manual/automatic: 400/380 mm Quill travel vertical: 63 mm Clamping surface, vertical: 830 x 224 mm Number of T-slots: 4 Angular table clamping surface: 700 x 285 mm 6 T-slots: 12 H8/45 mm Workpiece weight: 200 kg Distance table – spindle nose (vertical): 0 – 515 mm Distance table – spindle center (horizontal): 30 – 565 mm Drive power (at 1500 rpm): 2.2 kW Speed range: 45 – 2000 rpm Number of speeds: 12 Speed progression (geometric steps): 1.4 Tool holder (DIN 2079): ISO 40 Feed range (all axes): 2 – 1500 mm/min Rapid traverse (all axes): 1.5 m/min Operating voltage: 380 V/50 Hz Machine dimensions: 1.2 x 1.6 x 1.7 m Space required: 2.1 x 2.1 m Machine weight: 1100 kg EQUIPMENT / ACCESSORIES  Hand operation and CNC program control  Vertical and horizontal machining  Swiveling vertical milling head  Adjustable-angle vertical milling head  Various tool holders  Manual quill feed (vertical)  Angular table 700 x 285 mm  Coolant system  Coolant and chip tray  Electrically secured chip guard in work area  Mounting elements  Machine lamp  Documentation Condition: Control system overhauled, workshop tested

Condition: ready for operation (used), x-travel 510 mm y-travel 450 mm z-travel 410 mm taper in main spindle MAS BT 45° (SK40) table surface area 800 x 395 mm T-slots 6 Stk. turning speeds 50 - 2500 U/min feed stepless 4-1600/4-1000 mm/min voltage 400 V total power requirement 5.0 kW weight of the machine ca. 1400 kg range L-W-H 2300 x 2300 x 1800 mm from a training workshop maintained condition (!!) - in checked conditions - machinevideo - ?v=iSTVEdv2fO8 Furnishing : - robust universal milling machine - swiveling control panel, right front - rotatable universal milling head (re/li = 90°) * with hydraulic tool clamping - manual milling spindle feed, with locking - swiveling milling spindle protection - Stable T-slot clamping/angle table - Axis feeds with rapid traverse - Central lubrication unit - Control cabinet, installed on the left * Digital display - without function Nsdoxaam Uspfx Ah Hskt

Condition: excellent (used), HEIDENHAIN TNC430 with B + C axis Working travels 800 x 600 x 500 mm Table size Ø 280 mm Table swivelling +/-110° Table rotating 360° Spindle taper HSK63 Spindle speeds -15'000 rpm tool changer 30 pos. Coolant through spindle 3D tracer Renishaw MARCELS MASCHINEN CH Njdsk Dz Ngepfx Ah Hekt

Year of construction: 1997, condition: used, x-travel 600 mm y-travel 400 mm z-travel 420 mm Control Heidenhain TNC 407 quill stroke 75 mm table surface area 900x458 mm Tool bore SK 40 DIN 2080 oder DIN 6 turning speed range - stepless 20-4500 U/min transmission ratio 3 feed stepless 1-5000 mm/min Nsdpfx Ahjlp U Akj Hokt rapid motion -longitudinal/cross/vertical 7-7-6 m/min total power requirement 13 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 4x3,8x2,0 m

Condition: used, Year of construction: 1996, Technical details: x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm control: Heidenhain TNC 425 Nkjdpfx Aeu Nc T Reh Hjt spindle taper ISO: SK 40 DIN 69871 quill stroke vertical: 75 mm distance between column - table edge: 190 (fest) vertikal mm spindle head swivable left - right: 90° Vertikal-Spindel ° distance between table/spindle: min./max.: 165/565 Vertikal-Spindel mm distance between table/spindle: min./max.: 165/565 Horizontal-Spindel mm turning speed range: 20 ... 4500 U/min tool changer with: 32 tools (Typ HTC 32) feed:: 1 ... 5000 mm/min Table dimensions: 850x440 mm table swivelabel +/-: nein = starr ° table load: 500 kg total power requirement: 15 kW weight approx.: 3500 kg dimension machine xH: 2,5 x 3,0 x 2,1 m dimensions electric cabinet LxWxH: 1,6 x 0,6 x 1,7 m Universal Milling and Drilling Machine Equipment: - cooling tank capacity 100 litres, flow rate 16 l/min - control panel with jib length arm - hand wheel control unit - 8 pieces machine base The machine can be demonstrated under power. i.D. *

Condition: used, Year of construction: 1992, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 420 mm spindle taper ISO: SK 40 control: Heidenhain TNC 360 quill stroke vertical: 75 mm turning speed range: 20 ... 4000 U/min spindle head swivable left - right: 90° links / rechts ° feed:: X/Y/Z: 1...6000 mm/min. feed:: X/Y: 7 m/min. + Z: 6 m/min. Table dimensions: 900 x 460 mm table load capacity: 400 kg weight approx.: 2300 kg dimension machine xH: 4,0 x 3,8 x 2,0 m total power requirement: 13 kW Equipment: - separated production cell - coolant system - control panel with swivel-mounted boom - measuring probe SK 40 Heidenhain TS 120 Njdpfxou Nc U Ij Ah Hekt - oil collecting basin *

Condition: used, Year of construction: 1996, Technical details: x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm tool taper: IBAG SKI 25 control: Heidenhain TNC 425 quill stroke vertical: nicht bekannt mm turning speed range: 2400 - 24.000 U/min feed:: 1 ... 5000 m/min m/min table surface area: 850 x 440 mm table swivelabel +/-: starr ° table load: 500 kg tool holder / places: 32 places für IBAC SKI 25 weight approx.: 3600 kg dimension machine xH: 2,5 x 3,0 x 2,1 m dimensions electric cabinet: L:1550 X B:550 x H:1700 mm Universal Milling and Drilling Machine - with IBAG high frequency spindle type HF 100A-30/24 - milling spindle taper Tool taper IBAG SKI with IBAG tightening bolt - cooling tank, capacity 16 l/min and 100 litre capacity Accessories: - 3-D push-button Heimer - Vertical head Hermle - Tool holders according to availability Nkjdeu Nc Uhjpfx Ah Het i.D. *

Condition: excellent (used), Hermle UWF 900 Year of manufacture (according to circuit diagram): 1992 Heidenhain 407 control Handwheel Network connection Spindle speed: 4,000 rpm Technical data: X travel: 600 mm Njdpfxexf Ec Se Ah Hskt Y travel: 400 mm Z travel: 420 mm Tool holder: SK 40 Distance spindle/table: 127 - 567 mm Spindle diameter at front bearing: 55 mm Videos of the machine available!

Condition: used, Table size 900 x 460 mm X/Y/Z - 600/400/420 mm Spindle speeds 20-4000 rpm Spindle taper ISO 40 Hydraulic tool clamping Quill stroke in vertical head Vertical head swivels +/- 90 deg. Tool changer w/32 stations Control: Heidenhain TNC 407 Equipped with: Vice 19 tool holders Coolant Nkedpsl Dvx Esfx Ah Hst

Condition: used, Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: 460, rotational speed (max.): 15,000 rpm, spindle nose: HSK 63A, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Used HERMLE C800U high-speed 5-axis continuous vertical machining center; this is a medium-sized CNC machine equipped with a gantry granite structure, weighing 8,200 kg. Axis travels: X 800 mm, Y 500 mm, Z 600 mm, with a 5-axis table featuring a 280 mm diameter platter. Year of manufacture: 2000, fitted with HEIDENHAIN TNC 430, HSK 63A spindle at 15,000 rpm (max 19 kW) cooled by a dedicated chiller, 30-position pick-up type tool changer, and remote electronic handwheel. Nkedpfjxryfzsx Ah Hjt The equipment is completed by a KNOLL chip conveyor, high-pressure through-spindle coolant, and a RENISHAW MP10 wireless 3D workpiece probe.

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, mount diameter: 40 mm, total height: 1,800 mm, total width: 1,500 mm, total length: 1,600 mm, table width: 800 mm, table length: 395 mm, For sale is a conventional milling machine from the Hermle brand and the type UWF 801 Nsdpfxevtpl Re Ah Hjkt The machine is fully functional, easy to use and yet efficient, which makes it ideal for the DIY enthusiast but also for industry. x-travel: 500 mm y-travel: 430 mm z-travel: 400 mm Spindle mount ISO: SK40 Spindle head swivels left and right: right/left = 90° ° Quill stroke vertical: 80 mm Speed range: 40 - 2000 / 18 step rpm Feed: X+Y: 4 - 1600 steples mm/min Feed: Z: 4 - 1000 steples mm/min Rapid traverse: X+Y: 1.6 and Z: 1 m/min Table size: 800 x 395 mm Spindle drive: 3 kW Weight approx.: 1300 kg Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Chip collection tray Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website