Used Heller Mci 25 for sale (58)

Year of construction: 2005, condition: used, functionality: unexamined, machine/vehicle number: 46787, 46787 Machining center for centric turning operations on crankshafts or shaft-like components with 2 independent machining spindles. Control: Siemens 840D Tool holder: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter: Ø700 in nominal dimensions – tools are not included, but can be acquired or newly manufactured for an additional charge. NC-controlled steady rest supports – without steady rests Retractable 3-jaw chuck on both sides, manufactured by Blessing Automatic loading door from above with a loading interface Dedicated chip conveyor with high discharge The machine can currently be inspected while powered on. Setup of components is possible after consultation and for an additional charge, including documentation of replacement parts and tools. Safeguarding of the control system and drives is included – delivery free to site. This is the machine base of a 1250mm machine; however, the usable length is limited to approximately 680mm between centers due to the main drive shaft. With a new main drive shaft, a length of over 1050mm would be possible. Year of production: 2005 Machine for centric turning operations of crankshafts or shaft-typical parts with 2 individual machining spindles Machine control: Siemens 840D Tool adapter: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter Ø700 nominal – tools are not included and may be subject to a separate purchase or new procurement from the supplier. Nedpfxozdpvgo Alnecu NC-controlled roller support – no workrest included Retractable 3-jaw chuck on both sides from Company Blessing Automatic gantry door for overhead loading and corresponding interface Individual chip conveyor with high drop Machine can be inspected while powered on upon request Setup of individual parts possible for a separate cost, including documentation of change-over parts and tooling Safeguarding of control and drives included – free location Machine base is DRZ1250 – effectively, on current driveshaft, limited to 680mm length; with a new driveshaft, it could be extended up to 1050mm.

Condition: used, Year of construction: 1955, saw blade diameter 70 - 230 mm sawblade width 12 mm hole of sawblade 10 - 50 mm Nsdpfxotqqk Ns Alnscu grinding wheel diameter 120 mm grinding wheel width 6 mm grinding wheel hole diameter 32 mm no. of teeth 30 - 400 total power requirement 0,33 kW weight of the machine ca. 350 kg dimensions of the machine ca. 0,80 x 0,70 x 1,70 m

Condition: excellent (used), Year of construction: 2006, Heller MCH 250 4 axes Year of manufacture: 2006 Control: Siemens 840 D Nedpfx Aljy Nyckenocu Spindle speed: 12,500 rpm Travel distances: X: 800 mm Y: 800 mm Z: 800 mm Pallet size: 630 x 630 mm Max. tool length: 600 mm

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2006. It features a maximum spindle speed of 6000 rpm and a robust tool capacity of 100 tools in the automatic tool changer. The machine is equipped with twin pallets, enhancing productivity and efficiency. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. • Twin pallet Ncjdpfx Ajy H D T Ujlneu Technical Specification Taper Size SK 50

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2007. It features a spindle speed of 6000 rpm and a BT50 tool holder. The machine is equipped with an automatic tool changer that holds 100 tools, enhancing productivity. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. • 4th axis rotary table, 1-degree indexing • Probe (workpiece/tool probing system) Ncjdpfsy Epfvox Alneu Technical Specification Taper Size BT 50

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2005. It features an XYZ travel of 800 x 800 x 800 mm and a pallet size of 630 x 630 mm. The machine is equipped with a 100-tool automatic tool changer and a 6-pallet pool for enhanced productivity. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. • Pallet size: 630 x 630 Nedpfoy Egbrjx Alnocu • Tool magazine: 100 ATC • 4th axis: 360° Additional equipment • 6x pallet pool • Probe Technical Specification Taper Size SK 50

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 710 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 52, number of axes: 4, This 4-axis HELLER MCP 250 was manufactured in 2000. It features a maximum spindle speed of 6000 rpm and an automatic tool changer with 52 positions. The machine is equipped with twin pallets and offers an XYZ travel of 800 x 800 x 710 mm. If you are looking to get high-quality machining capabilities, consider the HELLER MCP 250 horizontal machining centre we have for sale. Contact us for further details. • Automatic tool changer (ATC): 52 tools Ncodey Ef D Eopfx Alnou Additional equipment • Twin pallet changer Technical Specification Taper Size SK 50

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15000N/15000N/17500N, feed speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6000rpm. Magazine capacity for a maximum tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in the system: 6, coolant tank volume: 1500l, 50bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6300mm/4900mm/4000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring IPM, remote diagnostics via modem, Renishaw MP10 touch probe, RSP 4-position round storage, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing device, 6 pallets, 4 of which are clamping towers with universal clamping bars, approx. 100 HSK 100 tool holders, and Losma filter system. Documentation available. On-site inspection is possible. Expected to be available from the end of January 2025. Ncsdpouxdhuefx Alnju

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Ncsdpfx Alox Hn D Rensu Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: good (used), Year of construction: 2017, Ref. -No.: 10596 Ncsdsx Hn D Dopfx Alneu Manufacturer: HELLER Type: H - 2000 Year of construction: 2017 Type of control: CNC-Steuerung Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: 56XXX X-Travel: 630 mm Y-Travel: 630 mm Z-Travel: 630 mm B-Axis: 0,001 ° Table Load: 500 kg Max. Tool Length: 350 mm Max. Tool Diameter: 160 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 80 Turning Speeds: 16000 RPM Tool changer: Doppelgreifer Max. Workpiece height: 850 mm Max. Torque: 95 Nm Rapid Travel X/Y/Z: 60 mm / min Rapid Traverse X-Axis: 80 m / min Rapid Travel Y-Axis: 80 m / min Rapid Traverse Z-Axis: 90 m / min Drive Capacity - Spindle Motor: 40 kW Internal cooling: 50 bar Numbers Of Pallets: 2 Size Of Pallet: 400 x 500 mm spindle running time: 1000 H Operating hours: 3000 H Workpiece interference circuit max.: 720 mm Media interface: 5 - fach Further information: - Equipped with NC rotary table. - State-of-the-art spindle technology. - Ideal for precise machining tasks. - Spindle hours: 1000. - Pallet can be rotated manually 4 x 90 - Hydraulic pressure 200 bar - Quick drill breakage check Machine can be viewed under power by arrangement

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : SK50 - Spindle power : 60 [kW] - Spindle speeds : 50-8000 [rpm] - Gearbox - Speed ranges : 2 LINEAR AXES - Travels on X/Y/Z axes : 1250 / 1200 / 1400 [mm] - Rapid traverses rates (X/Y/Z) : 50 [m/min] A ROTARY AXIS - Travel : [°] - Indexing precision : 0.001 [°] B ROTARY AXIS - Travel : (+/-) 360 [°] - Indexing precision : 0.001 [°] - Cutting feed rate : 10 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 50 - Tool exchange time : 6.3 [sec] TABLE - Table dimensions : 1100 [mm] - Maximum weight upon table : 2000 [kg] - Maximum part dimensions (diameter x height) : 1810 x 1400 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 50 [kW] WEIGHT & DIMENSIONS - Machine floor space : 7400 X 5400 [mm] - Machine height : 4800 [mm] MACHINE HOURS - Number of hours under power : 14238 [h] EQUIPMENT - CNC : Siemens 840 D SL - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming : Shopmill - Electronic handwheel - Linear scales - Rigid tapping - 3 colors status lamp - Coolant tank : 2450 [l] * with high-pressure pump : 50 [bars] * with cooling unit for coolant * with magnetic filter * With washing gun Ncjdsuhb D Aepfx Alnsu - Coolant through spindle - Micro-lubrification coolant - Chips conveyor - Oil mist extractor - Spindle cooling unit - Tool probe : Renishaw - Workpiece probe : Renishaw - Tool breakage detection - Electric transformer - Tool-holders

Condition: ready for operation (used), Year of construction: 1999, spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis HELLER MC 16-2 was manufactured in 1999. It features a Siemens control system, a robust tool magazine with 160 slots, and an HSK-63A tool holder. The spindle operates at a speed of 10,000 rpm, ideal for detailed machining tasks. If you are looking to get high-quality milling capabilities, consider the HELLER MC 16-2 machine we have for sale. Contact us for more information about this machine. Nedpfox D I Alsx Alnocu • Control: Siemens Sinumerik 840D • Tool magazine: 160 • Tool holder type: HSK-63A

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 630 mm z-travel 560 mm total power requirement 60 kW weight of the machine ca. 12.5 t dimensions of the machine ca. m H E L L E R (Germany) 5 Axis - CNC Controlled Horizontal Machining Centre Model FST- MC 160 / 800 / E Year 1998 Only approx. 500 hours in operation _____ Working range: Longitudinal stroke X axis 800 mm Vertical stroke Y axis 630 mm Cross stroke Z axis 560 mm NC rotary table Tilting A axis 180 ° Turning B axis 360 ° Ncedpfxot Hwrho Alnsu Size of pallet, approx. 250 x 620 mm Tool holder HSK 63A Spindle speeds, infinitely variable 63 - 20,000 rpm Feeds / quick feeds XYZ 1 - 70,000 mm/min Spindle drive 24 kW Total electrical load, approx. 60 kW - 400 V - 50 Hz Weight, approx. 12,500 kg Accessories / Special Features * 5-Axis SIEMENS CNC Path Control, Model SINUMERIC 840 D, allows working operation on 5 sides. * Workpiece handling system: Workpiece is mounted on a pallet outside the machine and is transported via a conveyor into a lifting/turning device, which brings the workpiece onto the table, where it is automatically clamped and machined. * 40-position tool magazine with tool replacement door, and laser-operated tool breakage control. * Internal high pressure coolant supply, 50 bar. * Coolant preparation unit with filter and temperature control. * Oil mist exhaust. * Separate cooling aggregate for motor spindle and switch cabinet. * CO² fire extinguisher. * Chip conveyor. * Complete covers for the working area. Machine comes from the design department of an car manufacturer and was only used for trials. The new price in 1998 was approx. 1.3 million DM (EUR 650,000.00). The machine is very suitable for medium-sized production series. Ideal for aluminium.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Control system: Siemens 840D-SL Ncodpfszck U Aox Alnju Tool positions: 160 Tool holder: HSK 63 Spindle speed: 10,000 rpm / 242 Nm Pallet size: 630 x 500 mm Number of pallets: 2 X-axis: 800 mm Y-axis: 800 mm Z-axis: 1000 mm Table load capacity: max. 1000 kg

Condition: new, Heller SL90 F A 23 Uni Pro CNC 90 interface card in opened original packaging, 100% functional. Nodpfx Aei Ea E Rslnecu

Condition: ready for operation (used), Heller uni-Pro 24.000914 monitor with 20.003 / E 23 control card, used, in good condition, 100% functional, scope of delivery as per photos Ncodpfx Asy Nrwaelnou

Condition: new, Heller CANCPU A 23 Uni Pro PLC 90 < unused > 100% functional. Njdpei Ea Exsfx Alnjcu

Condition: new, Gebr. Heller uni-Pro DIGI-Drive E3 23.020212 X VPS 30A-N12, new, in sealed original packaging, 100% functional. Nodpfxoi D U Sfs Alnocu

Condition: new, Heller CPU91 E93 H 23 Uni Pro PLC 90 < unused > 100% functional. Ncodpfei Ea E Hsx Alneu

Condition: ready for operation (used), Heller XGC90 H 23 Uni Pro CNC 90 graphics card, used, 100% functional. Nsdpfx Alsi Ea Hvonocu

Condition: ready for operation (used), Heller PLT 90 uni-Pro CNC 90 control panel SN:00214 - without key, used, good condition, 100% working, scope of delivery as per photos Nsdpfx Alstyr Avenecu

Condition: new, Heller ACPU90-SE D 23 Digi Drive ACPU90-S J 22 Uni Pro < unused > 100% functional. Nsdpfx Aloi Ea Emsnscu

Condition: excellent (used), Year of construction: 2007, Control: Siemens 840D powerline Travel paths X/Y/Z: 630/630/630 mm 2-fold pallet changer Spindle speed: 10,000 rpm Knoll coolant system with paper band filter Ncsdpfjzb R I Tjx Alnsu Tool holder: SK40 Tool magazine with 80 stations

Condition: used, Year of construction: 1999, Heller MC16 103 Serial No. 32-44069 Year of manufacture: 1999 Spindle speed: 45-16000 1/min SK40 X-axis travel: 630 mm Y-axis travel: 630 mm Z-axis travel: 630 mm Number of tools: 80 Tool diameter: 70/150 mm (with adjacent, free tool positions) Tool length: 320 mm Number of pallets: 2 Pallet dimensions: 400x500 Maximum pallet load: 500 kg B-axis: NC Tool length measurement: Yes Control system: Sinumerik 840D Ncsdpfx Ajydi H Telnju Probe: Heidenhain

Condition: used, Year of construction: 2003, Technical details: Ncsdpjw Ng D Hjfx Alneu x-travel: 450 mm y-travel: 450 mm z-travel: 450 mm weight of the machine ca.: 14 t size of pallet: 320 x 320 mm number of spindles: 2 Double spindle 4-axis machining center Horizontal 4 machine plates Renishaw probe Control Siemens Sinumerik 840D Working space (X / Y / Z): 450x450x450 mm Load pallet / table max .: 300 kg Acceleration: 10 m / s² Rapid traverse: 60 m / min Pallet size: 320 x 320 mm Chip-to-chip time: 2.6 s Workpiece height max .: 700 mm Tool holder: HSK 63 Tool places: 2x 60 Tool spindle: 10,000 rpm, 95 Nm Speed ??increase to 18,000 rpm Infrared receiver for probe, Make Renishaw Vaf72a0p Tool magazine with 60 places Control panel on the workstation Control panel on the tool installation site Workpiece positioning stations can be rotated manually with hydraulic workpiece clamping 60 bar Pneumatic support control on the workstation Automatic swing gate Extended coolant layer 70 bar / 1500I / VF 250 Coolant Cooler Working space flushing Emulsion mist suction Roto - Clear Automatic setup process Automatic disarming process Runtime and quantity recording Status lamp 3-color modem for remote diagnosis control cabinet lighting *