Linde h 25 for sale

Your location was not identified (Edit)
Enter your address
or
Move
8
Drive type Diesel Load capacity 2500 kg Load center of gravity 500 Available immediately Condition visually very good Condition technically very good Mast type Triplex Lifting height 5800 mm Free stroke 1880 mm Forks length 1200 mm Attachments side sliders Attachments Description integrated Optional equipment 3. ValveFull cabinExplosion-proof Working height 2620 mm Front tyres type super elastic Front tyres state 60 - 80% Rear tyres type super elastic Rear tyres Condition 40 - 60% Gearbox Hydros... more
6
Vehicle data - make: Linde - type: H25D / / HH 4,300 mm / FH 2.130 mm / Sideshift / duplex - drive type: diesel - carrying capacity: 2500 kg - load Centre of gravity:-lifting height: 4300 mm - range: 0 mm - year: 2013 - operating hours: 16095 - internal No.: G0008 _ Nn709 Mast data - mast type: duplex - lifting height: 4300 mm - height: 2700 mm - free lift: 2130 mm - carriage: 0 mm - forks: 0 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 2700 mm - weight: 3755 kg _ Ba... more
1
Type VL0102504B1P03 Bdmaq9uyjl hoist speed 125 kg: 2 gt; 8 m/min hoist speed 250 kg: 1 gt; 4 m/min power: 0,2 kW more
12
two-shaft shredder Dimensions in mm, LxWxH: 5000 x 2050 x 1200 cutting size: 1850 mm x 1400 mm Knife discs -width: 74 mm (new armour-plated) Hydraulic motors: 2 radial piston motors HÄGGLUNDS Mucmgw 1 x type: MA 200 1 x type: MA 400 Weight shredder, without hydraulic unit: 20 tons HYDRAULIK drive: max. operating pressure: 400 bar Drive motors: 2 x 132 kW High pressure pumps: axial piston pumps Dimensions in mm,LxWxH: 2850 x 1100 x 2350 Weight without fuel tank: approx 4000 kg Tan... more
4
Pneumatic cylinder, pneumatic cylinders, pneumatic stamp, air stamp Stroke 125 mm Piston diameter 63 mm Piston rod 20 mm thread holder M16 -Gesamtlänge 320 mm Extended-Gesamtlänge 445 mm Ng3sh -Luftein-and adjustable output -4 x cylinders available Price per piece Weight 2.7 kg more
5
Hydraulic cylinder, vertical Moovable cylinder, hydraulic stamp, printing stamp 20v3un Piston diameter about 100 mm Piston rod ø 60 mm stroke 250 mm-Gesamtlänge Center retracted center hole 690 mm Recording piston rod ø M48 mm Recording cylinder Ø 60 mm -universell can be used -1 x cylinder available Award pieces Dimensions 750/250/H160 mm Weight 52 kg / piece more
5
Hydraulic cylinder, vertical Moovable cylinder, hydraulic stamp, printing stamp Piston diameter 220 mm Bazav92wf0 Piston rod ø 125 mm tube outside Ø 260 mm Stroke 500 mm-Gesamtlänge retracted mid center hole 1195 mm Recording piston rod ø 100 mm Recording cylinder Ø 100 mm -universell can be used -21 x cylinders available Award pieces Dimensions 1360/530/H300 mm Weight 364 kg / piece more
5
Hydraulic cylinder, vertical Moovable cylinder, hydraulic stamp, printing stamp Piston diameter 40 mm Piston rod ø 20 mm stroke 150 mm-universell can be used -1 x present price per piece Bd3x8utlj8 Ø50/H445 dimensions mm Weight 6 kg more
5
Liniarantrieb, linear geared, hub gears, spindle drive DC motor 24 V Hub 766 mm Piston rod 30 mm -Gesamtlänge Center bolt retracted 956 mm -Gesamtlänge Center bolt 1722 mm extended -with adjustable magnetic limit switches 2zlzaazh (several available) more
4
Hydraulic cylinder, vertical Moovable cylinder, hydraulic stamp, printing stamp 9biodlkk3 Piston diameter 25 mm Piston rod ø 16 mm hub 260 mm recording Rod M10 mm -universell can be used -1 x cylinder available price per piece 457/43/H38 dimensions mm Weight 2.45 kg / piece more


linde h 25
daily

New machines via email!

Stay updated!
4
Hydraulic cylinder, vertical Moovable cylinder, hydraulic stamp, printing stamp Piston diameter 25 mm Piston rod ø 12 mm stroke 50 mm recording Rod M10 mm 9binz0ew2 -universell can be used -1 x cylinder available price per piece 242/43/H38 dimensions mm Weight 1.37 kg / piece more
4
Hydraulic cylinder, vertical Moovable cylinder, hydraulic stamp, printing stamp Piston diameter 40 mm Piston rod ø 25 mm stroke 320 mm-universell can be used -1 x present price per piece Dimensions 51/64/H530 mm Weight 4.75 kg Bs9pncgs more
4
Start hole EDM machine model 3525 CA Traverse path x/Y mm 350 x 250 Maximum workpiece size 600 x 300 mm Maximum workpiece weight kg 250 Machine dimensions W = 1200 mm H = 2100 mm T = 1100 mm J7g7x0i Machine available from July 2019 Identical machine is gone but available - with water more
2

Double Column Press - mechanical SCHULER SA 125

Eislingen, GermanyGermany dealership location
17981 km
1977
used
pressure:125 t stroke:25 fix mm 88u7n0usu no. of strokes:70 - 700 /min distance between columns:1150 mm distance table/ram, max. stroke up, adjustment up:400 mm table surface area:1150 x 1000 mm hole in the table:900 x 220 mm side window:650 mm ram surface:990 x 850 mm ram adjustment:60 mm material width:250 mm material thickness:2,5 mm power requirement:46,5 kW weight:29,5 t Dimensions (WxDxH): m list price: in running function in our warehouse: German Safety: permitted for automatic mode: i... more
2
Make De Dietrich & Cie. France, Type AE-2500, No 57949, New 1989, Lining material Glass - Enamel (3009), Reactor (1x), Capacity 3468 Ltr, Vessel sizes dia. 1600x1600mm, Dished bottom , Dished top side , Manhole dia. 350x450mm (oval), Top connections 5x dia. 100mm + 2x dia. 200mm, Outlet dia. 100mm, Working pressure vac/6 bar, With jacket (380 Ltr), Working pressure vac/7 bar, Max. temperature -25/+200 Degr. C., With anchor stirrer , Motor 500 Volt (Ex), Speed mixing shaft variable, Floorspace 2,... more
3
Dry resin transformer ZUCCHINI LEGRAND 250 KVA manufactured in 2011. The transformer was used for five years. Technical parameters : - power: 250 kVA - 3 phases - cooling: AN Bfgrkpqx7n - temperature insulation class: 155 degrees C - temperature increase: 100 K - weight: 1070 kg more
6

Cycle Lathe CHEVALIER FCL-2580H

Bochum, GermanyGermany
18019 km
2018
as good as new (ex-display)
Cycle lathe, built 2018, immediately available, including 2 daily programming training at the customer's 4-speed turret head quick-change holder PARAT Reinforced coolant pump LED lighting W9gco Additional portable handwheel High-quality 315 RÖHM wedge rod chuck SIEMENS 828D with full-fledged ShopTurn dialog programming 3D simulation Thread repair cycle Positionable rotary spindle more
5

Vise RÖHM RKE-125 LV

St. Ingbert, GermanyGermany dealership location
18132 km
used
thickness of jaw:125 mm : mm clamping width:225 mm 2riqdm weight of the machine ca.:30 kg tension force:40 kN more
10
Max edge length: 2500 mm Max sheet thickness: 2.5 mm steel 0i8ed9zx Manual rear stop up to 500 mm Automatic bending mode with stopover more
5

Double Column Press - mechanical SCHULER SA 250

Eislingen, GermanyGermany dealership location
17981 km
1978
used
Pressure:250 t stroke:30 mm no. of strokes:60 - 500 /min Distance between columns:1500 mm Ibjosox distance table/ram, max. stroke up, adjustment up:390 mm table surface area:1580 x 1100 mm hole in the table:1270 x 300 mm table height over floor:1470 mm side window:600 mm ram surface:1500 x 900 mm ram adjustment:100 mm material width:500 mm material thickness:0,5 - 1,5 mm coil weight:6,5 t coil internal diameter:420 - 560 mm coil external diameter:1500 mm no. of straightening rolls: straighteni... more
2
Make Thyssen Henschel, Type TK/D 125, No 850026, New 1993 (has never been used), Material Stainless steel 1.4541 (321), Cold mixer "Continuous high speed mixer" (1x), Capacity 7,5 Ltr, Vessel sizes dia. 125mm, Max. temperature 200 Degr. C., With jacket (2,5 Ltr), Working pressure 5 bar, With motor 15,0 KW + 5,5 KW, 500 Volt (Ex), Rotor speed Outer mixing tool 60-2000 Rpm/Inner 1500 Rpm, Mounted on frame , Floorspace 3,5x0,5 M, Total height 1,0 M, Extra Specifications - Easy clean - 2 counter-rot... more
6
Vehicle data - make: Linde - type: E18L-01 / / HH 3,300 mm / side-shift / fork positioner / good condition - drive type: electric - load capacity: 1800 kg - load Centre of gravity:-lifting height: 3300 mm - range: 0 mm - year: 2014 - hours of operation: 14386 internal No.: E0544 _ Mast data - mast type: standard - height: 3300 mm - height: 2150 mm - free lift: 0 mm - carriage: 0 mm - forks: 1200 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 2150 mm - weight: 3600 kg _ Zj... more
5
work piece width:75 - 1250 mm workpiece height:19 - 610 mm drill diameter:8 - 50 mm Nnrdf The saw drilling line consists of a Peddinghaus BDL 1250 D beam drilling line and a Meba 1020 DGP band saw. The Meba 1020 DGP band saw and the Peddinghaus BDL 1250 D are both from yoc 2008. Specifications Peddinghaus beam drill BDL 1250 D This high-speed drill line with Siemens control 840 Di is optimally suited for the signing and marking of profiles. The maximum working width is 1250 mm, the maximum wo... more
6

- NEW - TEACH-IN LATHE PINACHO SE 325 X 2000

Matelica (MC), ItalyItaly dealership location
17814 km
2017
ready for operation (used)
DISTANCE BETWEEN CENTRES: 2000 mm CENTRE HEIGHT: 325 mm MAX SWING OVER BED: 652 mm BAR CAPACITY: 80 mm SPINDLE: 1500 rpm; 7,5 Kw; ASA 2-8 ; 315 mm TURRET HEAD: 4 POS CONTROL UNIT: FAGOR 8037 T BED WIDTH: 350 mm WEIGHT: 2600 Kg OVERALL DIMENSIONS: 3850 x 1450 x 1875 mm ACCESSORIES: SWARF CONVEYOR; STEADY REST; FOLLOW REST PRICE: On demand Dpjcug7 more
6
Single column - KRUPP eccentric press type PEKRD 125 h Masch. No. 2861 built in 1977 Pressure force 125 ton. Throat depth 400 mm Table size 950 x 750 mm Tappet surface 800 x 540 mm Table opening 100 x 250 mm Stroke adjustment 8 mm to 160 mm Tappet adjustment 100 mm Height of largest hub of up to 550 mm Number of strokes 60 strokes/min. Table height above floor 800 mm Motor power 10 kW Bc9wpa7z9d Power supply 380 v, 50 Hz -Hydraulic overload in the RAM -Pneumatic clutch brake comb... more
4
Pressure:63 t throat:250 mm stroke:10 - 100 mm no. of strokes:120 /min distance table/ram, max. stroke up, adjustment up:380 mm table surface area:700 x 500 mm hole in the table:180 x 140 mm table height over floor:700 mm ram surface:360 x 275 mm Ihosnv30k ram adjustment:60 mm power requirement:5,5 kW weight:3,8 t Dimensions (WxDxH): m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic overload protection in ram:mechanical two-hand and foo... more
2
Make Glatt Process Technology GmbH Binzen, Type FBE-125 R, No 6154, New 1995, Material Stainless steel 1.4301 (304), Fluidbeddryer (1x), With pan mounted on wheels (2x), Capacity 125 Ltr, Pan sizes dia. 725x450mm, Can be heated by steam (to be heated with hot water, cap. 45,49 KW), With fan make Fima, type RCR3-U-160-MBGX, Capacity 0,417 M3/Sec, Motor 7,5 KW, 380 Volt, With dust filter , Filter surface 4,0 m2, With switchgear , Floorspace dryer 1,5x1,5 M, Total height 4,5 M, Weight ± 2950 KGS W... more
11

Bed type Correa Milling machine CORREA CF22/25 - 9670311CF22/25

Burgos, SpainSpain dealership location
19180 km
1997
ready for operation (used)
Retrofitted: 2018 Numerical control: HEIDENHAIN TNC-426 Technical features Dimensions Bzuo9rj Table dimensions: 2500 x 700 mm Number of slots: 5 T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mm Y axis traverse: 800 mm Z axis traverse: 800 mm Milling head Head type: Universal ma... more
2

Cutting mill Tria Schneidmühle Tria Typ 30/25 B

Zuzenhausen, GermanyGermany dealership location
18019 km
ready for operation (used)
Power: 5.5 kW Suitability: Rubber, plastics, wood, organics Tep7kqhg 3-blade rotor 2 Statormesserreihen Rotor diameter 220 mm Working width 300 mm Inlet cross section approx. 320 x 250 mm Drive motor 5.5 kW (Serial number: 1639 / second-hand machine) more
6
Vehicle -Factory: Linde Type: H70T-01//HH 3.450 mm/side sliders -Drive type: Drift gas -Load capacity: 7000kg -Load focus: -Lift height: 3450 mm -Range: 0 mm -Built: 2012 -Engine hours: 4196 -Internal No.: E0596 _____ Mastast data -Masttype: Standard -Lift height: 3450 mm -Height: 2900 mm -Free hub: 0 mm -Fork carrier: 0 mm -Forks: 1200 x 0 x 0 mm _____ Dimensions -Length:... more
3

Bügelsäge Behringer KS 325 HY

Bruchsal-Büchenau, GermanyGermany
18046 km
1984
excellent (used)
Bügelsäge Behringer KS 325 HY 19-03-027 Lieferzeit: sofort Nummer: 19-03-027 Maschinendaten Baujahr: ca. 1984 L x B x H: ca. 1700 x 900 x 1300 mm Gewicht: ca. 800 kg Sehr Guter Allgemeinzustand Nmu9p Technische Daten Sägeblattabmessungen: ca. 550 x 40 x 2,5 mm Schnittbereich: 90 Grad Rund: ca. Ø 325 mm Schnittgeschwindigkeit: ca. 15 / 24 & 35 m/min Bff8zw8b2i Antriebsleistung: ca. 3,0 kW Zubehör -Schnittdruck einstellbar -Hubzahl einstellbar -Kühlmittelei... more
4

Toggle Press SCHULER PKnr 250/0,36

Eislingen, GermanyGermany dealership location
17981 km
1965
used
pressure:250 t distance between columns:360 mm stroke:60 mm Stroke rate:60 / min Distance table/ram, max. stroke up, adjustment up:340 mm Table surface area:340 x 470 mm table height over floor:710 mm Ram surface:240 x 240 mm Ram adjustment:12 mm Power capacity:4,0 kW Bfdyjvzfgw Weight:5,2 t Dimensions (WxDxH):1,6 x 1,3 x 2,7 m more
2
Make Technoglass/De Dietrich (vessel/cover), Type AE-2500, No 2804/62331 (vessel/cover), New 1984/1997, Lining material Glass - Enamel, Reactor (1x), Capacity 3510 Ltr, Vessel sizes dia. 1600x1500mm, Dished bottom , Dished top side , Manhole dia. 350x450mm (oval), Top connections (7x), Outlet dia. 80mm, Working pressure vac/6 bar, Test pressure 9,1 bar, With jacket (373 Ltr), Working pressure vac/7 bar, Test pressure 10,4 bar, Max. temperature -25/+200 Degr. C., With paddle stirrer , Motor 5,5/8... more
6

Bed type Correa Bed type milling machine CORREA A25/25 - 9253906A25/25

Burgos, SpainSpain dealership location
19180 km
1998
ready for operation (used)
Retrofitted: 2019 Numerical control: HEIDENHAIN TNC-407 Technical features Dimensions Table dimensions: 3500 x 1000 mm Nnhrh Number of T slots: 7 T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mm Y axis traverse: 1200 mm Z axis traverse: 1500 mm Milling head Head type: New! Auto... more
4

Cutting mill Möser Profilschneidmühle Möser Typ KG 35/25 PW

Zuzenhausen, GermanyGermany dealership location
18019 km
ready for operation (used)
Power: 22 kW Suitability: Plastics, wood, organic materials 3-knife rotor 2 stator knife rows Rotor diameter: 350 mm Rotor width: 250 mm Inlet cross-section for profiles: approx. 250 x 100 mm Drive motor: 22 kW Machine in noise protection enclosure Be9jnwtbdj (Machine number: 10976 / used machine) more
6
Vehicle data - make: Linde - type: H16T-01 / / HH 6.470 mm / Sideshift / triplex / good condition - drive type: gas - load capacity: 1600 kg - load Centre of gravity:-lifting height: 6470 mm - range: 0 mm - built: 2013 - operating hours: 13181- Internal No.: E0429 _ Mast data - mast type: triplex - lifting height: 6470 mm - height: 2830 mm - free lift: 0 mm - carriage: 0 mm - forks: 1200 x 0 x 0 mm _ Zjoz0wld Dimensions - length: 0 mm - width: 0 mm - height: 2830 mm - weight: 3075 kg _ ... more
8

Wire cutter HITACHI 254Y/FF3

Brno, Czech RepublicCzech Republic
17479 km
2003
excellent (used)
In good technical condition. Year of production 2003. Ezafvcj Axis travel: X x Y x Z: 250 x 400 x 210 mm. U-axis travel V: 200 x 200 mm. Automatic wire threading. Automatic deionization. Automatic closed water conditioning. Input transformer. Basic clamping elements supplied with the machine. Geenerator FF3. Operating Instructions + Programming Manual. more
1

Surface grinding machine SCHLEIFPOWER FSM 2550 AHD

Wiener Neudorf, AustriaAustria dealership location
17519 km
2015
ready for operation (used)
Distance spindle nose to table 450 mm Table 0600 x 254 mm Delivery promptly, subject to prior sale Special price € 11.520,-(instead of € 14.400,-) Spindle nose to table distance: 450 mm Bdsmp93gzy Table: 600 x 254 mm Längsverfahrweg: 600 mm Magnetic clamping plate: 508 x 254 mm Spindle speed: 2.850 U/Min. Schleifscheibenabm.: 200 x 20 x 312 mm maximum workpiece weight: 180 kg Spindle motor power: 2,2 kW Length: 2200 mm Width: 1800 mm Height: 1.850 mm Weight: 1800 kg 2-axis digit... more
2
Make De Dietrich, Type CE-2500, No 56515, New 1987, Lining material Glass - Enamel, Reactor (1x), Capacity 3235 Ltr, Vessel sizes dia. 1600x1300mm, Dished bottom , Dished top side , Manhole , Top connections (various), Outlet dia. 80mm, Working pressure vac/6 bar, Test pressure 9,1 bar, With jacket (352 Ltr), Working pressure vac/6 bar, Test pressure 9,1 bar, Max. temperature -25/+200 Degr. C., With propellor stirrer , Motor 7,5 KW, 380 Volt (Ex), Floorspace 1,8x1,8 M What you can expect from Fo... more
1

Bed type Correa Milling machine CORREA A25/30 - 1988A25/30

Burgos, SpainSpain dealership location
19180 km
1988
ready for operation (used)
Numerical control: HEIDENHAIN TNC-155 Technical features Dimensions Table dimensions: 3300 x 900 mm Number of T slots: 7 T slots dimensions: 22 mm Traverses of axis X axis traverse: 3000 mm Y axis traverse: 1000 mm Z axis traverse: 1000 mm Milling head Head type: Universal Manual Tool clamping syst... more
6
L + Z lathe COLCHESTER / HARRISON type student 2500 Series. No. 307917P built in 2011 Top width 635 mm Turning diameter over bed 330 mm Swing over cross slide 210 mm Tip height over bed 167 mm Tip height over cross slide 106 mm Spindle hole 41 mm Longitudinal feed and plan Chuck short taper DIN 55029 camlock D1-4 Ø 63 mm Tailstock inner cone MT 3 Pinolverstellung 105 mm Spindle speed 40-2500 RPM. 12 steps Transmission-2,2 kW Power supply 400 Volt, 50 Hz -2-axis Digital ACU-RITE, ... more
6
Vehicle data - make: Linde - type: N20 VI / / 2432 STD liftable platform - type of drive: electric - load capacity: 2000 kg - load Centre of gravity:-lifting height: 210 mm - range: 0 mm - year: 2009 - operating hours: 2432 - internal No.: C0941 _____ Dvvqai Mast data - mast type:-lifting height: 210 mm - height: 1270 mm - free lift: 0 mm - carriage: 0 mm - forks: 1140 x 160 x 55 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 1270 mm - weight: ... more
15
Technical data ----- Belvqmhoql First allowance 04/1994 Built 1994 Permissible total weight 2,500 kg Empty weight 2170 kg Axes 1 Width 2160 mm Height 2620 mm Vehicle description ----- On offer is 1 Kärcher TFK 250 field kitchen, light system converted to 12 volts of operation, train equipment converted to ball head, curing brake, ... more
1

Radial drilling machine BOHRPOWER BPC 50/1250

Wiener Neudorf, AustriaAustria dealership location
17519 km
2016
ready for operation (used)
Drilling capacity in steel 50 mm Projection-1220 mm Delivery promptly, subject to prior sale Special price € 9.360,-(instead of € 11.700,-) Drilling capacity: 50 mm MK: 5 Projection: 1,220 mm Speed: 25-2,000 rpm Wzw9k Feeds: 0.04-3.2 mm / Rev Motor: 4 kw Quill stroke: 315 mm Distance from the underside of the table spindle: 330 - 1.17 mm Length: 2,035 mm Width: 1,000 mm Height: 2.630 mm Weight: 3.000 kg 16 speeds 16 aut. Feeds with a dice table coolant system engine light hydrau... more
2
Make Schneider AG Pfäffikon, Type VMT-250, No 9269-1, New 1981, Material Stainless steel 1.4571 (316Ti), Paddle dryer (1x), Capacity 313 Ltr, Trough sizes dia. 600x1000mm, Manhole dia. 350mm, Outlet dia. 150mm, Working pressure vacuum, With jacket (38 Ltr), Working pressure 4 bar, Test pressure 6,5 bar, Shaft can be heated (14 Ltr), Working pressure 4 bar, Test pressure 5,2 bar, Max. temperature 150 Degr. C., Motor ± 5,5 KW, 400 Volt, With variable speed drive , Floorspace 2,6x1,6 M What you c... more
2

Bed type Correa Bed type milling machine CORREA A25/50 - 9252316A25/50

Burgos, SpainSpain dealership location
19180 km
1990
ready for operation (used)
Retrofitted: 2019 Numerical control: HEIDENHAIN TNC-320 (¡NUEVO! / NEW!) Technical features Dimensions Table dimensions: 5000 x 1000 mm Number of T slots: 7 Be9egqpm7y T slots dimensions: 22 mm Traverses of axis X axis traverse (mm): 5000 Y axis traverse (mm): 1200 Z axis traverse (mm): 1000 Milling head ... more
5

Shredder VECOPLAN-Maschinenbau VAZ 145/250

Saarland, DeutschlandGermany
18135 km
1995
ready for operation (used)
SHREDDER VECOPLAN. Bff2xci2u7 VAZ 145/250. more
6
Vehicle data - make: Linde - type: T20 / / 1101 STD shaft position determines the speed - drive type: electric - load capacity: 2000 kg - load Centre of gravity:-lifting height: 0 mm - range: 0 mm - year: 2011 - operating hours: 1101 - internal No.: C0329 _ Mast data - mast type:-lifting height: 0 mm - height: 1450 mm - free lift: 0 mm - carriage: 0 mm - fork: 950 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 1450 mm - weight: 625 kg _ Battery & charger - battery volta... more
1
- Furnace was used for assing plastics about 4 months ! Vsrqsq - 1100°C Tmax - With temperature controller more
3
For sale is the following machine Bewe3gmn7v Konica Minolta bizhub Press 1250P Including SD-506, RU-510.PF-702.Patilite, FS-532.FD-503 SN A4EX021000084 ACTION: This machine is only available with the assumption of a maintenance contract with Konica of €900net/month to 1.7.2020. This contract has 300,000 s/w clicks included and comprehensive technician maintenance at machine accident during this period. Used, normal signs of use, 100% functional, supplied according to photos, if nec... more


linde h 25
daily

New machines via email!

Stay updated!

to

to

Edit search
LINDE H 25
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.