Used Heating Element for sale (14,545)

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heater Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Usable Heating Plate Area: Width 600 mm x Depth 400 mm Maximum Part Dimensions: - Max. Part Width: 620 mm - Max. Part Depth: 420 mm - Max. Upper Part Height: 350 mm - Max. Lower Part Height: 350 mm (Combinations of part heights possible, depending on contour) - Max. Working Temperature for contact process: 400°C The machine's modular frame structure enables easy retrofitting and conversions. Side doors and the front door in the welding area are easy to open (for simple retooling). The automatic safety lift door ensures high operator safety. Temperature controllers on the operator panel are equipped with actual/target value displays. The operator panel is a Siemens PLC unit. Machine control is via Siemens PLC (S7-300 controller). The heating elements feature temperature sensors for temperature regulation and act as a safety shut-off in case of overheating. Locating pin systems on the tool clamping surfaces enable reproducible receptacle positions. Advantages of Heater Element Welding Technology: - Secure welding of parts with thin or varying wall thicknesses is possible - Low rejection rate due to precise and reproducible weld joints Hedpfoykvdlex Ab Iok - Thanks to precise time control, temperature control, and force dosing, even sensitive parts can be welded - Almost all thermoplastics can be welded with this process - Different plastic types can be welded together (compatibility should be checked) Technical Data: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Nominal current: 20 A - Required supply cable cross-section: 5 (supply cables) each 6 mm² - Required pneumatic connection: 6 bar Machine Dimensions: - Machine width approx. 1.22 m - Machine width incl. operator panel approx. 1.8 m - Machine depth approx. 2.1 m - Machine depth incl. operator panel approx. 2.6 m - Machine height approx. 2.4 m - Machine height with raised safety door approx. 2.85 m (door open) Weight: Approx. 2.2 t

Condition: used, Year of construction: 2007, Manufacturer : - Year : 2007 Type: Melter with heating elements - immersion heaters Volume : 35 L Anchor blade stirring with Teflon scrapers Tank lid Variable speed drive: mechanical and manual Jacketed : Yes Immersion heaters: 2 Workshop test temperature: 80°C Recirculation pump for jacket Electrical cabinet Hedpfsx R Dlxex Ab Isk Video available in running condition

Condition: used, Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge, heating element, heating register, finned tubular heater -Manufacturer: Siemens, heating element finned tubular heater -Type: Order no.: 2NW 3510 Instr. no.: J100 519 201 Hedpsqn Ap Rofx Ab Isk -Voltage: 220 V -Power: 1000 W -Immersion depth: 800 mm -Quantity: 2x heating element available -Price per piece -Total dimensions: Ø 122 x 910 mm -Weight: 6.8 kg/pc.

Condition: used, Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge, heating element, heating register, finned tubular heater -Heating element: finned radiator -Type: unfortunately no type designation Hedpfx Aeqpl R Ajb Iek -Voltage: V -Power: W -Total dimensions: 825/100/H130 mm -Weight: 8.4 kg

Year of construction: 1999, condition: used, Compressors, screw compressor, compressor heating, compressor heating, finned tube radiators, finned tube radiators, finned tube heating - frost guard Hsdpfx Absu Rv Tas Iek -Manufacturer: Helios, finned tube radiator from screw compressor BlitzTyp Monsun 7.5 P .: 06010021 -Power: 230 V / 1000 Watt -Dimensions: 560/110/H160 mm -Weight: 3.3 kg

Condition: good (used), screw-in heater, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Power: 9000 watts 230/400 volts -Material: steel (magnetic) Hedpfsc Rrt Aex Ab Iok -Number: 8x radiators available -Price: per piece -Dimensions: 1020/60/H60 mm -Weight: 1.7 kg

Condition: used, Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Manufacturer: HTT, heating element type 2132G311 -Power: about 12 kW 400 V Hedoh R Ny Eopfx Ab Iek -Bolt circle: Ø 145 x 18 mm -Immersion depth: 800 mm -Total dimensions: 940/185/185 mm -Weight: 13 kg

Condition: good (used), heating element, air heater, heating fan, hot air blower -Power: 3x 2.5 kW -Diameter: 45 mm Hedecccxvopfx Ab Iok -Length of heating element: 180 mm -Total length: 215 mm -Dimensions heater: 45/45/H215 mm -Quantity: 1 piece available -Weight: 0.37 kg

Condition: used, Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Power: 1.5kw -Number: 2x elements available -Price per piece -Dimensions heater: 65/65/H230 mm -Weight: 0.53kg Hsdpecccxpofx Ab Iek

Condition: used, Heating element, air heater, heater fan, hot air fan Hodpfxocgqcxe Ab Isk -Power: 5.0-6.7 kW -Voltage: 380-440 volts -Number: 1x elements available -Price: per piece -Dimensions heating: 65/65/H160 mm -Weight: 0.4 kg

Condition: good (used), heating element, air heater, heating fan, hot air blower -Power: 3.0 kW -Length: heating element 120 mm .Diameter: 50 mm Hjdpfxscccxrs Ab Iok -Overall dimensions: 50/50/H160 mm -Quantity: 1 piece available -Weight: 0.26 kg

Condition: good (used), Year of construction: 1981, Heating elements control unit -for: heating elements -Connection: from the electrode welding machine Hsdpfx Abeb A H Uzs Iok -Regulator and recorder -Handover in its current condition as inspected -in transport crate -Weight: 80 kg

Condition: good (used), Year of construction: 1981, Heating elements control unit -for: heating elements Hsdsb A Ruispfx Ab Iok -Connection: from the electrode welding machine -Regulator and recorder -Handover in its current condition as inspected -in transport crate -Weight: 95 kg

Condition: good (used), Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Type: HLP 220 V 500 W Hsdpfx Aeb A Sdaeb Isk -Length: 165 mm -Diameter: 13 mm -Price: per piece -Quantity: 4x Available -Weight: 0.2 kg

Condition: good (used), Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Type: HLP 230V 500W -Length: 90 mm -Diameter: 13 mm -Price: per piece -Quantity: 9x Available -Weight: 0.2 kg Hodpjb A Sc Uefx Ab Ijk

Condition: good (used), Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Type: HLP 220V 800W Hodpfx Abeb A Sdbj Iek -Length: 140 mm -Diameter: 13 mm -Price: per piece -Quantity: 12 available -Weight: 0.2 kg

Condition: excellent (used), Carel HeaterSteam UR020HL10S isothermal steam humidifier The Carel HeaterSteam UR020HL10S is an isothermal steam humidifier. It produces steam by heating heating elements immersed in a steam cylinder filled with water. This can be regular tap water or fully demineralized water. The heat generated by the heating elements heats the water to a temperature of 100°C. Technical specifications: Dimensions: (L x W x H): 690 x 438 x 887 mm Weight: 63 kg Steam output: 20 kg/h Power: 15 kW Power supply: 400 V/3 Steam pressure: 0...3600 Pa Steam connection: 40 mm Water supply connection: 3/4" G male Steam distribution For optimal humidifier performance, the produced steam must be distributed evenly throughout the room to avoid droplet formation and condensate accumulation. This can be achieved either with vented steam distributors or steam lances. The choice of steam distributor depends on the room into which the steam is to be introduced. For direct room humidification (in rooms, factory halls, etc.), vented steam distributors (optional) with a motorized fan should be used. However, if steam is to be distributed via ducts or air handling units, Steam lances are used, which utilize the speed of the air flowing through them for humidification. Hjdpfxou Eb A Ns Ab Iok You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Separator element for pallet racking system. Suitable for frames with depths of 1000, 1050, and 1100 mm. Hjdpfek Tzzlex Ab Ijk Arm length: 500 mm For a 2700 mm bay with 6 arms: 24 pcs – 67 EUR + VAT/piece For a 2700 mm bay with 10 arms: 46 pcs – 89 EUR + VAT/piece For an 1800 mm bay with 7 arms: 4 pcs – 51 EUR + VAT/piece If you require racking or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking and accessories and are happy to assist you with your planning. Further accessories available upon request, including: Frame, corner, and impact protection, push-through protections, chipboard panels, wire mesh decks, rear mesh panels, and depth support bars. Shipping: Please inquire about shipping costs, specifying your postal code, location, and desired quantity. Additional services: Planning, racking assembly/disassembly, purchase/sale Technical data, specifications, and prices are subject to change and errors. Subject to prior sale!

Condition: used, Year of construction: 1997, functionality: fully functional, power: 1,000 kW (1,359.62 HP), Boiler with feed system - Year of release: 1997 - manufacturer: Komforts - Power 1 mW. - moving floor supply system with hydraulic station, - chimney, - pumps, - control, - hot water accumulator. Hsdpfx Asv D Uz Ejb Ijk

Condition: like new (used), functionality: fully functional, machine/vehicle number: Geo Knight Maxi - Press, Year of construction: 2017, Please see PDF for detailed secifications: The Maxi Press AIR is an Automatic large format heat transfer press intended for more automated and higher pressure needs than the Manual version. The Maxi- AIR provides an oversized platen & a better production-oriented press with a single front loading table and high pressure pneumatic lifting system. This pressure system is powered by a dual air-bag, 10-ton, 20,000 lbs max force self leveling mechanism. The press Hodpfev Dm Udex Ab Iok is activated with a push of a button, and automatically releases at the end of the timing cycle. The front console features the Digital Knight control, regulating digital temperature and digital automatic timing control, as well as full air pressure regulation. Ideal applications that the Maxi- AIR has performed flawlessly include: large fabrics & piece goods, full-bleed printed sportswear, banners, fl oor mats, carpets, mouse pads, plastics, sheet metal and much more. Most importantly, the 20,000 lbs of regulated applied force allow for deep embedding of materials such as TILES into nomex padding for full bleed wrap-around printing, as well as larger embossing applications. The Maxi- AIR strongly supports the sublimation transfer process, as well as digitally produced transfers, hot and cold peel plastisol transfers and large format laminating processes.

Condition: used, tank capacity: 12,220 l, GENERAL Design: rectangular Remarks: 2 cooling plates inside the tanks; 1 manhole approx. 340 x 440 mm in the front bottom Overall width: 1,480 mm Overall height: 2,700 mm Overall length: 4,450 mm Heating/Cooling: available Location: Bremen Volume: 12,220 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: wine storage Hodpfx Abeyckupo Ijk TANK Support type: feet Number of feet: 7 pcs HEATING/COOLING JACKET Internal tempering: cooling plate EQUIPMENT Discharge: DN40 DIN 11851 MATERIAL SPECIFICATION Temper system material: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, Year of construction: 2023, tank capacity: 100,000 l, GENERAL Equipment: Venting/air release Design: Horizontal Year of manufacture: 2023 Hedpfx Aeyckwqjb Ijk Notes: Manhole diameter approx. 600 mm; includes optical leak detector, tank fitting for heating oil, overfill prevention device, and ladder with working platform; External diameter: 2,900 mm Total length: 16,050 mm Heating/cooling: present Location: External storage Minden Technical documentation: Drawing, various documents Nameplate: Volume: 100,000 liters Product-contact material: Steel Condition: used Cylindrical length: 14,960 mm Last application: Heating oil TANK Support type: Saddles welded on HEATING/COOLING JACKET Internal temperature control: Immersion heater EQUIPMENT Manhole / dome: on the tank

Condition: used, tank capacity: 565 l, GENERAL Equipment: Ventilation/air outlet, ball valve Design: Container Remarks: Frame, Fe (galvanized); External diameter: 1,080 mm Internal diameter: 1,077 mm Total width: 1,121 mm Total height: 1,041 mm Total length: 1,121 mm Heating/Cooling: present Location: Outdoor storage Technical documentation: Drawing Nameplate: Volume: 565 liters Cylinder wall thickness: 1.5 mm Product-contact material: V2A 1.4301 (AISI304) Hodpfx Asyck Agsb Ijk Condition: unused Cylindrical height: 500 mm TANK Base design: Frame HEATING/COOLING JACKET Internal temperature control: Immersion heater EQUIPMENT Manhole / dome: in the top head (DN 400) Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Feet material: steel

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: Level indicator (without guarantee) Design: upright Remarks: Manhole diameter: approx. 420 x 320 mm Internal diameter: 820 mm Total height: 2,350 mm Heating/Cooling: available Max. permissible operating overpressure: 6.0 bar Base type: feet Location: external storage Technical documents: drawing Cylinder tempering: Thermoplate Volume: 1,000 liters Product-contacting material: V2A 1.4301 (AISI304) Hsdpsx Dmbgsfx Ab Isk Condition: factory new Cylindrical height: 1,238 mm TANK Number of feet: 3 pcs EQUIPMENT Manhole / Dome: in the cylinder Outlet: DN50 DIN 11851 MATERIAL CHARACTERISTICS Exterior surface: marbled

Year of construction: 2004, condition: used, GENERAL INFORMATION Year of manufacture: 2004 Overall width: 470 mm Overall height: 1,200 mm Hedpsxqcimofx Ab Iek Overall length: 2,000 mm Miscellaneous: - Capacity: 213 liters - Design pressure: 10 bar - Design temperature: 110° C - Test pressure: 14.3 bar Location: Bremen Nameplate: Condition: used Last application: winery