Used Hardinge Gx 480 for sale (40)

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: NVLA7K0128, travel distance X-axis: 480 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: Fanuc, controller model: 0i-MC, total length: 1,575 mm, total width: 2,168 mm, table width: 400 mm, table length: 600 mm, overall weight: 3,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 7,500 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 16, Equipment: rotational speed infinitely variable, BRIDGEPORT HARDINGE GX480 Vertical Machining Centre. New 2007 With Coolant, Interlocked guards, Low Volt Light FANUC 0i-MC Control Crodpsxgqwdsfx Ab Tek Machine Dimensions: 1575 x 2168 mm Machine Weight 3000 kg Spindle Motor Power 7.5 kW Spindle Speed 10000 rpm Table Size 600 x 400 mm Tool Change Capacity 16 Station Tool Size BT40 Traverses XYZ 480 x 400 x 330 mm

Condition: good (used), Year of construction: 2014, operating hours: 921 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 640 mm, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 12 m/min, overall weight: 9,800 kg, spindle speed (max.): 6,000 rpm, Equipment: chip conveyor, Hardinge GX-1600 (Year 2014) Control System: FANUC Oi-MD Conveyor included Tool Magazine Capacity: 30 tools X-Axis Travel: 1,600 mm Y-Axis Travel: 700 mm Z-Axis Travel: 640 mm Table Size: 700 mm x 1,700 mm Maximum Table Load Capacity: 1,500 kg Spindle Speed: 6,000 RPM Spindle Taper: CAT 50 Spindle Motor Power: 18.6 kW (25 HP) Feed Rates (All Axes): 2.54 – 12,000 mm/min Rapid Traverse Rate: 29,159 mm/min Clearance from Tabletop to Spindle Nose: – Maximum: 790 mm – Minimum: 155 mm Machine Dimensions (L x W x H): Crjdpfxjw Hzu Nj Ab Tok 3,900 mm x 2,723 mm x 2,878 mm Machine Weight: approx. 9,800 kg

Condition: used, Year of construction: 2011, Used 2011 Hardinge plied with 8000 RPM Spindle, 30 station ATC, Swarf conveyor, coolant equipment & manual set. SPECIFICATION: TRAVELS: X Axis 1020 mm, Y Axis 540 mm, Z Axis 540 mm Credpfxsvq Ry Ds Ab Tsk Spindle Nose to Table (~ max) 685 mm, Spindle Nose to Table (~ min) 145 mm TABLE: Length 1120 mm, Width 540 mm T-Slot Width 18 mm, T-Slot Centre Distance 160.0 mm, Number of Std T-Slots 3 Max Weight on Table (evenly distributed) 700 kg SPINDLE: Max Rating 17.4 hp 13 kW, Max Speed 8,000 rpm, Max Torque 82.76 Nm, Drive System Direct Speed Belt Drive, Taper BT 40, Bearing Lubrication Air/Oil Injection Cooling Air Cooled FEEDRATES: Rapid and Jog (Max.) 36 m.min Cutting Feed Rate (Max.) 12 m.min AXIS MOTORS: Axis Motor Rating X Y Z - 2.29 12,29 3.3 KW TOOL CHANGER: Type Carousel, Capacity 20 Max tool diameter 89 mm Tool length Max. 250 mm Tool weight Max. 6 kg Tool change time 6 sec GENERALS: Air Required 4 scfm, 700 psi /min Power supply 45A FLA / 400 v / 3 phase Coolant Capacity 360 L Control: Siemens 828D Spec: Travel X 1020 Y 540 Z 540 mm | Max spindle RPM 8,000 | BT40 Accessories: Swarf conveyor, Coolant equipment, 20 tool ATC

Condition: used, Year of construction: 2008, Used 2008 built Hardinge Bridgeport GX 600 in immaculate condition,with Heidenhain i530 control, swarf conveyor & fitted with the optional 12,000 RPM BT 40 spindle, an option very rarely fitted to this model! USB Port Please Note: Photos of the machine are taken as installed, better pictures will be taken on arrival. Control: Heidenhain i530 Spec: X600 Y540mm Z510 mm | 12000RPM | BT40 Accessories : swarf conveyor, USB Port Spindle: 20 HP (15kw) Spindle speed: 12,000 rpm (belt-driven) Rapid traverse rates: 30M/Min Tool changer: 20 Working surface: 750mm x 540mm Floor space: 2215 mm x 2490 mm Crodpsvq Ry Rofx Ab Tjk Max machine height at tool changer position: 2713mm Approx machine weight: 5500kg

Condition: used, Year of construction: 2001, functionality: fully functional, Control: GE FANUC Series 18i-T Travel range X-axis: 570 mm Working stroke X-axis: 250 mm Travel range Z-axis: 200 mm Swivel diameter: 260 mm Max. turning diameter: 220 mm Max. workpiece length: 100 mm FORCARDT 3QLC 250-72 Z8 S12 power chuck Max. spindle speed: 4,500 rpm Crsdpex A Ac Dsfx Ab Tek Main drive power, 100/40% duty cycle: 15/22 kW Torque 100/40% duty cycle: 202/303 Nm Rapid traverse speed in X: 60 m/min Rapid traverse speed in Z: 30 m/min Standard automation with 12 - 18 pallets Tool carrier with driven tools, 12 stations Max. speed of driven tools: 6,000 rpm Includes various driven tools and chip conveyor Dimensions without chip conveyor (LxWxH), approx.: 2,720 x 1,500 x 2,400 mm Weight approx.: 6,500 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, CNC turning center Hardinge Conquest 51T, low hours, year of manufacture 2021, inspection/test run possible at any time Cjdpfewtplcex Ab Tjrk

Condition: used, Year of construction: 2006, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Hardinge Lathe Model Talent 10/78 Siemens CNC Year 2006 With Tooling With Documentation With Chip Conveyor Crodjxzp R Sepfx Ab Tjk Video Available

Condition: ready for operation (used), Year of construction: 2006, General Data Measurements width 5500 mm Measurements depth 4400 mm Measurements height 2900 mm Crodpfx Abjxl Hzvj Tok Control Unit Brand SIEMENS Model 810T Main Drive Number of axis 3 Movement X-Axis Movement 1250 mm This 3-axis Hardinge Bridgeport MMD VMC1250 P3 vertical machining centre was manufactured in 2006. It features a Siemens 810T control system and offers an impressive X-axis travel of 1250 mm, making it suitable for various milling applications. The machine's transport dimensions are approximately 4400 mm in width, 5500 mm in depth, and 2900 mm in height. Consider the opportunity to buy this Hardinge Bridgeport MMD VMC1250 P3 machine we have for sale. Contact us for further details. Application Types Milling

Condition: like new (used), Year of construction: 2018, operating hours: 598 h, functionality: fully functional, The HARDINGE GS42 is a CNC lathe designed for precision turning of hardened surfaces. Reason for sale: Order was lost before full production commenced. ONLY 598 operating hours Control: FANUC Oi-TF Max. turning diameter: 284 mm Max. swing diameter: 457 mm Max. spindle speed: 6,000 rpm Spindle bore: 42 mm Csdpexx Rgisfx Ab Terk Turret with 12 stations (VDI 30) (non-driven) PERFORMANCE PLUS package - Linear glass scales for X and Z axes - Spindle chiller - Heat exchanger for motor and spindle. High-pressure coolant system, cooling through turret (20 bar) Live high-performance tailstock VOP40P complete system (precision measuring probe)

Condition: excellent (used), Hardinge HXL-S CNC Lathe Csdpsxrvdgjfx Ab Tsrk Fagor Control Year 1998 Manuals Great Condition - Fully Working with no faults. We welcome any inspections

Condition: used, Year of construction: 2001, functionality: fully functional, Control: GE FANUC Series 18i-T Travel range X-axis: 570 mm Working stroke X-axis: 250 mm Travel range Z-axis: 200 mm Swivel diameter: 260 mm Max. turning diameter: 220 mm Max. workpiece length: 100 mm FORCARDT 3QLC 250-72 Z8 S12 power chuck Max. spindle speed: 4,500 rpm Main drive power, 100/40% duty cycle: 15/22 kW Torque 100/40% duty cycle: 202/303 Nm Rapid traverse speed in X: 60 m/min Rapid traverse speed in Z: 30 m/min Standard automation with 12 - 18 pallets Tool carrier with driven tools, 12 stations Csdpfjx A Ackjx Ab Tsrk Max. speed of driven tools: 6,000 rpm Includes various driven tools and chip conveyor Dimensions without chip conveyor (LxWxH), approx.: 2,720 x 1,500 x 2,400 mm Weight approx.: 6,500 kg

Condition: used, Year of construction: 2005, CNC Machining Center HARDINGE BRIDGEPORT XP610 (Year 2005) Condition: Good, technically sound. Manufacturer: Hardinge / Bridgeport (USA / UK) Model: XP610 Year of manufacture: 2005 A compact and reliable CNC vertical machining center designed for precise milling, drilling, and tapping of metal parts. The Bridgeport XP series is known for its high accuracy, robust construction, and reliable control system, making it an excellent solution for manufacturing processes where precision and repeatability are crucial. Main technical specifications: Cedpfx Absxqp Eno Tsrk (according to Hardinge Bridgeport XP610 model specifications) Control system: Heidenhain iTNC 530 Travel (X / Y / Z): 610 × 510 × 510 mm Table size: 800 × 520 mm Max. table load: 500 kg Spindle speed: up to 10,000 rpm Spindle taper: BT40 Tool changer: 20 positions (automatic) Spindle motor: 11–15 kW Cooling: integrated coolant system Power supply: 400 V / 50 Hz Machine weight: approx. 6,000 kg Application: The Hardinge Bridgeport XP610 is designed for precision machining of components and parts: - Metal, aluminum, copper, and brass workpieces - Tool and die manufacturing - Production of mechanical components and industrial parts Suitable for both small batch and series production where a precise, stable, and repeatable result is required. If you have any further questions, please feel free to contact us.

Condition: good (used), Year of construction: 2007, operating hours: 30,000 h, CNC Lathe Hardinge Quest 6/42 SP Technical Data and Scope of Supply TECHNICAL DATA Manufacturer: Hardinge Model: Quest 6/42 SP Year of manufacture: 2007 Control: GE Fanuc 18i-TB Supply voltage: 400 V Phases: 3 Frequency: 50 Hz Machine current: 78 A Spindle drive: 44 A Control voltage: 115/24 V Operating hours: approx. 30,000 h Spindle mount: A2-5 Bar capacity: 42 mm Chuck size: 150 mm Max. workpiece length with collet: 381 mm Max. workpiece length with chuck: 270 mm Max. turning diameter: 309 mm Cedpfxoxflpro Ab Tsrk X-axis travel: 89 mm Z-axis travel: 406 mm Rapid traverse X-axis: 28 m/min Rapid traverse Z-axis: 38 m/min Turret: 12 station VDI 30 Indexing time: 0.1 s Machine length: 2,576 mm Depth: 2,025 mm Height: 1,905 mm Weight: approx. 5 t SCOPE OF OFFER Includes (not exhaustive): - CNC lathe Hardinge Quest 6/42 SP - Toolholder set - Chip conveyor - Transformer - Chip tray - Renishaw probe For the exact scope of supply, please refer to the photo documentation. The CNC Lathe Hardinge Quest 6/42 SP with Fanuc 16i/18i/21i control system from 2007 is a high-precision machine designed for a wide range of turning operations. It features a robust A2-5 spindle mount, a 42 mm bar capacity, and a 150 mm chuck, allowing flexible machining of different workpiece sizes. With a maximum turning diameter of 309 mm, even larger components can be machined reliably. The axes provide generous travel ranges of 89 mm (X) and 406 mm (Z), as well as high rapid traverse speeds, ensuring maximum productivity. The 12-station VDI 30 turret with an extremely short indexing time of 0.1 seconds guarantees fast tool changes and minimizes downtime. Thanks to the solid construction and the proven Fanuc control, the Hardinge Quest 6/42 SP is ideally suited for series production with the highest accuracy demands. No guarantee is given for the correctness, completeness or currentness of the information provided.

Year of construction: 2001, condition: ready for operation (used), General Data Measurements width 1950 mm Measurements depth 3860 mm Measurements height 1905 mm Crjdpfoxuw E Rex Ab Tsk Machine weight 5550 kg Control Unit Brand FANUC Model 21iT Main Drive Spindle speed range 50–4200 Spindle motor power 15 kW Movement X-Axis Movement 189 mm Workpiece Workpiece drm over bed 520 mm Additional Equipment High-speed tailstock Parts catcher Bar feed interface This HARDINGE Quest 51 SP was manufactured in 2001. It features a swing over bed of 520 mm, a maximum turning diameter of 356 mm, and a spindle speed up to 4200 RPM. The machine includes a 12-station live tooling turret with integrated C-axis and Y-axis for multi-axis machining. Control is managed via a 21iT CNC system. Consider the opportunity to buy this HARDINGE Quest 51 SP horizontal turning machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 110 mm, spindle speed (max.): 160,000 rpm, spindle speed (min.): 8,000 rpm, workpiece weight (max.): 250 kg, overall weight: 6,000 kg, travel distance W-axis: 400 mm, Hauser Coordinate Grinding Machine S35. Fully functional. Very good motors and additional accessories available. The machine is under power and can be inspected. Grinding trials can be arranged by appointment. U-axis in excellent condition. Positioning is highly precise. C-axis for contour grinding is available and fully operational. Control: Fanuc O-M The machine is in daily use and continues to be highly accurate. Crjdpfx Absxp Hq Eo Tek Fanuc components have been replaced over the last two years. Old parts have been exchanged for new ones. Machine is being sold - > bought as seen -> "As is where is" - no manufacturer or seller warranty. Training on the machine and control system is possible at any time, either at our facility or on your premises. (We are also happy to assist with any further questions.)

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, controller model: Siemens 810D, spindle speed (max.): 8,000 rpm, Hardinge VMC‑1000 P3 Vertical Machining Centre Year : 2006 Control: Siemens 810D X-axis travel: 1020 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Linear way Table size: 1120 × 510 mm Spindle taper: BT‑40 Spindle speed: up to 8000 rpm Spindle motor power: 13 kW Rapid traverse X/Y/Z: 30 000 mm/min Tool changer capacity: 20 tools Coolant-through-spindle: 20 bar Chip conveyor: included Machine footprint (approx): 3300 × 2100 × 2100 mm Crodpfow Naufox Ab Tsk Alle technische specificaties zijn ontleend aan betrouwbare bronnen. Voor uw zekerheid adviseren wij deze nogmaals te controleren.

Condition: good (used), Year of construction: 2013, operating hours: 59,861 h, functionality: fully functional, Control: Fanuc 32i A Automation: FMB Unirobot MH5LS-SP Grinding spindle: Jäger HF spindle Chuck: MicroCentric 4-410-3-QC Max. Ø80 Chip conveyor: Liqui gravity filter type UR1020 with clean container 180L Year of manufacture: 2013 Hours: 59861h Hardinge GT27SP CNC lathe: Control: Fanuc 32i Axes: 2 (X and Z) Crjdpfx Aevntk Tsb Tsk Travel paths: From the operating manual measured on the tool top plate Z: 286mm / X: 607mm Spindle speed max.: 6000rpm Dimensions of the machine L x W x H: 1850 x 1750 x 1750 Weight: approx. 2100Kg MARPOSS measuring system with automated dimension compensation Oil mist filter S400 on the machine Spindle cooling possible, currently out of service due to MircoCentric chuck FMB Unirobot MH5LS-SP Robot: Yaskawa Motoman MH005LS Control: DXM100 with handheld programming device Jaws: 3 jaws double gripper system with integrated presser Axes: 6 Serial number robot: RH9G49-3303-1 Serial number robot control: S21K60-2-4-O Year of manufacture: 08/2012 Dimensions of the robot cell L x W x H: 1900 x 950 x 2000 Weight of the robot cell: No exact details approx. 1000kg With blow-off unit Turning station in the robot cell 5x workpiece pallets 400x600mm, side 1: 77 parts / Page 2: 150 parts Liqui gravity filter type UR1020 with clean container Filter type: belt filter Serial number: 33145 Year of manufacture: 2013 Dimensions LxWxH: 1500 x 800 x 1100 Weight: approx. 250Kg Grinding spindle: Jäger SF spindle Type: Z80-M530.05 K1,2CK Max. speed: 30,000 rpm Supply voltage: 3-phase 200V-480V AC 50/60hz Frequency converter installed in the control cabinet, operated via external control interface External cooling unit KKG15 1.5kW Grinding spindle holder Grinding wheel holder RINECK Accessories / tools: 2x MAS-MEX20-GT27-1-S385H holder 2x MAS-MEX20 turn sleeve 2x MAS-turn ring 2x hydraulic expansion for internal extractor 1x holder for rotary holder + rotary holder 1x MARPOSS probe with holder

Condition: used, Year of construction: 2005, functionality: fully functional, Manufacturer: Hardinge / Bridgeport (USA / UK) Model: XP1000 Year of Manufacture: 2005 Reliable and efficient CNC vertical machining center designed for milling, drilling, and tapping a wide range of metal components. The Bridgeport XP series is renowned for its robust construction, high precision, and fast processing capabilities, making it ideal for both job shop and series production. Main technical specifications: Crodpfx Abjxqpruo Tok (based on Hardinge Bridgeport XP1000 specification) Control: Heidenhain iTNC 530 Travel: X = 1020 mm / Y = 510 mm / Z = 635 mm Table size: 1200 × 520 mm Max. table load: 700 kg Spindle speed: up to 10,000 rpm Spindle taper: BT40 Tool changer: 20 positions (automatic) Spindle motor: 15 kW Machine weight: approx. 7,000 kg Power supply: 400 V / 50 Hz Cooling system: integrated Application: The Hardinge Bridgeport XP1000 is designed for precision metalworking—milling, drilling, tapping, and contour machining. Ideally suited for: - Tool, mold, and component manufacturing - Automotive, equipment, and industrial sectors - Situations requiring accuracy, reliability, and consistent performance If you have any further questions, we will be happy to assist you.

Condition: used, Year of construction: 2007, A 2007 Built Hardinge Bridgeport XR760 with Fanuc 18iM control, 12,000 RPM RPM spindle with through coolant, 30 tool rapid ATC & swarf conveyor X Axis 760mm, Y Axis 610 mm, Z Axis 610 mm Working Surface 1000 x 600mm, Table Load 900 kg, Number of T-Slots 5, T-Slot Size 18 mm, T-Slot Center Dimension 100 mm Table Surface to Spindle Gauge Plane Distance 100 to 710 mm Feedrate Range (X and Y Axis) .0025 - 20 m/mm Feedrate Range (Z Axis) .0025 - 20 m/mm Ball Screw Dia. and Pitch (X and Y Axis) 45 x 16 mm, Z Axis 45 x 12 mm, Spindle 12,000 RPM Fanuc Motor HP Rating (S6 40%) 25Kw, Torque (S6 40%) 159.2Nm, Spindle Taper BT 40 Magazine Capacity 30 Tools Max. Tool Diameter 125 mm (adjecent pocket) 80 mm Max. Tool Length 300mm, Max. Tool Weight 7 kg, Coolant and Chip Management Swarf Removal Chip Conveyor, Coolant Tank Capacity 355L, Wash Down Standard, Wash Gun Standard, Cutter Air Blaster Standard, Through Spindle Coolant Accuracy - ISO 230-2. Positioning - A 0.010 mm, Repeatability - R 0.004 mm, Machine Size, Machine Dimensions (WxD) 2528 x 3000 mm. Electrical Supply (Input)—Balanced 3-Phase 50 or 60 Hz, Power 25 KVA, Voltage, Compressed Air (Pressure / Flow) 4.9 cfm, Coolant Flow Rate at Cutter 160 L/min. Through Spindle Coolant Pressure 20 bar (Std) Washdown 140 L/min Control: Fanuc 18iM Specification: Travel X 760 Y 610 Z 610 mm | 12000 RPM | BT40 Accessories: 30 tool rapid ATC & swarf conveyor Name of machine: Hardinge Bridgeport XR 760 Credpfjvkwk Aex Ab Tek Rapids: Auto Mode (X and Y Axis) 43 m/mm. Auto Mode (Z Axis) 36 m/mm

Condition: ready for operation (used), Year of construction: 2007, General Data Machine weight 4800 kg Control Unit Brand SIEMENS Model Sinumerik 810D Main Drive Number of axis 3 Movement X-Axis Movement 1020 mm Y-Axis Movement 510 mm Z-Axis Movement 510 mm This 3-axis HARDINGE Bridgeport VMC 1000 vertical machining center was manufactured in 2007. Consider the opportunity to buy this HARDINGE Bridgeport VMC 1000 vertical machining center if you are looking to get high-quality milling capabilities. Contact us for more information. Application Types Milling Cedpfx Absxuav Se Tork

Year of construction: 2006, condition: ready for operation (used), Table dimensions X/Y: 1370mm/660mm, travel X/Y/Z: 1250mm/660mm/635mm, speed: 8000rpm, spindle mount: BT40, tool positions: 32, spindle-table distance: 790mm, control: Siemens 810 T. Documentation available. On-site inspection is possible. Crodpfx Abjv Ubp De Tok

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, controller model: Siemens 810D, spindle speed (max.): 8,000 rpm, Hardinge VMC‑1000 P3 Vertical Machining Centre Year : 2006 Control: Siemens 810D X-axis travel: 1020 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Linear way Table size: 1120 × 510 mm Spindle taper: BT‑40 Spindle speed: up to 8000 rpm Spindle motor power: 13 kW Rapid traverse X/Y/Z: 30 000 mm/min Tool changer capacity: 20 tools Csdpfx Abjw Etq Tj Terk Coolant-through-spindle: 20 bar Chip conveyor: included Machine footprint (approx): 3300 × 2100 × 2100 mm Alle technische specificaties zijn ontleend aan betrouwbare bronnen. Voor uw zekerheid adviseren wij deze nogmaals te controleren.

Condition: excellent (used), Year of construction: 2017, operating hours: 34,536 h, functionality: fully functional, Control: Fanuc 32i A Automation: FMB FANUC UNIROBOT Grinding spindle: Jäger HF spindle Chuck: MicroCentric 4-410-3-QC Max. Ø80 Chip conveyor: Knoll filter system KF110/500 Year of manufacture: 2013 / Commissioning 2017 (exhibition machine) Hours: 34536h Hardinge GT27SP CNC lathe: Control: Fanuc 32i A Axes: 2 (X and Z) Travel paths: From the operating manual measured on the tool top plate Z: 286mm / X: 607mm Spindle speed max.: 6000rpm Dimensions of the machine with robot cell LxWxH: 4600 x 1600 x 2700 without status light Weight: approx. 2100Kg MARPOSS measuring system with automated dimension compensation Oil mist filter S400 on extendable stand 1525 - 2740mm Spindle cooling possible, currently out of service due to MircoCentric chuck FMB Unirobot LR Mate Robot: FANUC LR MATE 200iD7L-P2TB Control: FANUC R30iB Max. part diameter feed: Ø70mm Jaws: 3 jaws Double gripper system for gripping in the bore with blow-off unit Axes: 6 Serial number robot: E-83200 Serial number robot control: E15X36204 Year of manufacture: 10/2015 Dimensions of the robot cell: Robot cell sits on the machine (see photos) Weight of the robot cell: No exact details approx. 1000kg Turning station in the robot cell Conveyor belt raw/finished part converted to 2900mm length each Knoll filter system KF110/500 with Knoll hinged belt conveyor type 320 S-1/50 Filter type: belt filter Cedpfx Absvntxke Tjrk Serial number: 581402 Year of manufacture: 2014 Tank volume: 500L Pressure: 5-30Bar Dimensions LxWxH: 1750 x 750 x 1550 Weight: No information, estimated at approx. 500-700Kg. Grinding spindle: Jäger SF spindle Type: Z80-M530.08 Max. speed: 30,000 rpm Control panel installed in the machine Frequency converter installed in the control cabinet Grinding spindle holder RINECK grinding wheel holder Accessories / tools: 2x MAS-MEX20-GT27-1-S385H holder 2x MAS-MEX20 turn sleeve 2x MAS-turn ring 2x hydraulic expansion for internal extractor 1x holder for rotary holder + rotary holder 1x MARPOSS probe with holder

Year of construction: 2017, condition: ready for operation (used), X-axis: 607mm, z-axis: 286mm, spindle speed: max. 6000/min, control: Fanuc 32i A, length: 4600mm, width: 1600mm, height: 2700mm, weight: 2.1t, operating hours: 34,536h. With automation FMB Unirobot LR MATE 200iD7L-P2TB, grinding spindle Jäger HF-Spindle, chuck MicroCentric 4-410-3-QC, MARPOSS measuring system with automated dimensional compensation, oil mist filter S400, belt filter Knoll KF110/500, hinged belt conveyor 320 S1 and other accessories. On-site inspection is possible. Crodpfsv Uz Akjx Ab Tsk

Condition: excellent (used), Year of construction: 2021, operating hours: 14,841 h, functionality: fully functional, Control: Fanuc 32i Automation: FMB UNIROBOT GP7-5Pkhs Grinding spindle: Jäger HF spindle Chuck: MicroCentric 4-410-3-QC Max. Ø80 Chip conveyor: Knoll compact filter with hinged belt conveyor Year of manufacture: 2021 Hours: 14841h Hardinge GT27SP CNC lathe: Control: Fanuc 32i Axes: 2 (X and Z) Travel paths: From operating manual measured on tool top plate Z: 286mm / X: 607mm Spindle speed max.: 6000rpm Dimensions of the machine LxWxH: 1850 x 1750 x 1750 Weight: approx. 2100Kg MARPOSS measuring system with automated Dimension compensation Oil mist filter S400 on extendable stand 1525 - 2740mm Spindle cooling possible, currently out of service due to MircoCentric chuck FMB UNIROBOT GP7 Robot: YASKAWA GP7 Control: YASKAWA YRC1000 Jaws: 3 jaws double gripper system with integrated presser and blow-off unit Axes: 6 Machine No.: 11-210314 R 1889290 Year of manufacture: 2021 Dimensions of the robot cell LxWxH: 1850 x 900 x 2000 Weight of the robot cell: No exact details approx. 1000kg Turning station in the robot cell 5x workpiece pallets 400x600mm, side 1: 77 parts / side 2: 150 parts Knoll filter system KF110/570 with Knoll hinged belt conveyor type 320 S-1/50 Credpfx Abjvnt Dtj Tek Filter type: belt filter Serial number: 1513866 Year of manufacture: 2021 Tank volume: 570L Pressure: 5-30Bar Dimensions of the filter system LxWxH: 1800 x 900 x 1900 Weight: No information, estimated at approx. 500-700Kg. Grinding spindle: Jäger SF spindle Type: Z100-M536.03 K1,2S5GS Max. speed: 36,000 rpm Supply voltage: 3-phase 200V-480V AC 50/60hz Frequency converter installed in the control cabinet, operation via external control interface Grinding spindle holder RINECK grinding wheel holder Accessories / tools: 3x MAS-MEX20-GT27-1-S385H holder 3x MAS-MEX20 turn sleeve 3x MAS-turn ring 2x hydraulic expansion for internal extractor 1x hydraulic expansion for rotary holder + rotary holder 1x MARPOSS probe with holder