Used Hard Candy Line for sale (12,276)

Condition: used, Year of construction: 1995, Hole row and fitting drilling machine Year of manufacture: 1995 Single-row hole row and fitting drilling machine Hinge plates and fittings can be processed without major retooling Workpiece width max. 600 mm Drilling bar with 15 spindles, spacing 32 mm Knodpfx Alsz H Dwnjbsc Indexing system, manual, with stop guides Drilling length max. 480 mm Motor 2.2 kW - 2800 rpm Drill chuck 10 mm with clamping surface Operating pressure 6 bar Weight: approx. 220 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2025, Overview New complete filling and packaging line for beer and carbonated soft drinks in aluminium cans, with an output of 6,000 cans/h at 500 ml and 8,000 cans/h at 330 ml. The line runs from the depalletizer through can rinsing, filling and seaming, tunnel pasteurization, inspection and drying to sleeve labelling, tray shrink wrapping, ABB robot palletizing and pallet stretch wrapping. Two-floor layout: depalletizing on the upper floor, a clamping conveyor lowers the cans to the ground floor for all following machines. All machines are built by Ningbo Cixi except the ABB robot. Technical data - Year of manufacture: 2025 - Capacity: 6,000 cans/h at 500 ml Standard, 8,000 cans/h at 330 ml Standard - Can formats: 330 ml Standard (Ø 66 x 115.2 mm), 500 ml Standard (Ø 66 x 168 mm) - Lid size: 202 for all formats (plug Ø 52.40 mm) - Electrical supply: 380 V / 220 V, 50 Hz - Filler: compressed air and CO2 at 0.4 MPa - Pasteurizer heating: steam at 0.4 MPa, steam boiler not included Scope of Delivery - Depalletizer | XD400 | automatic tier sheet removal and empty pallet stacking, Siemens PLC and touch screen, 10,000 cans/h, 7.8 kW, approx. 8 x 4 x 3.3 m - Can lowering conveyor | JSJ-A | S-type clamping conveyor from the upper to the ground floor, fits both can formats - Can rinser | CX-1 | inline spray rinser, 2 sets of can cages, approx. 4,000 mm total length - Filler-seamer monoblock | AXW20-4Q | 20 filling valves, 4 seaming heads, automatic lubrication, change parts for Ø 66 mm cans, 7.5 kW, approx. 5,000 kg, 3,050 x 2,000 x 2,000 mm - Tunnel pasteurizer | BG-PLG | 8 temperature zones, 4 plate heat exchangers, 25 kW, 16,000 x 2,400 x 1,800 mm including heat exchangers and piping - Fill level inspection | YMXS-180G | inline - Leak inspection | inline internal pressure check - Can inverters | FGJ | 2 units - Air knife dryer | CG-1 | 24,000 cans/h, 7.5 kW fan - Can conveyors | magnetic chain conveyors, approx. 97 m up to the labeller with 13 drives and control cabinet, plus 22 m of belt conveyor from the labeller to the shrink wrapper - Sleeve labeller | SLM-150 | up to 9,000 cans/h, PM-1800 steam shrink tunnel with steam generator, mandrels for both can formats - Tray shrink wrapper | BT25 (TPM-250A) | film-only packs and tray with film, up to 25 packs/min, max. pack size 420 x 280 x 350 mm, approx. 3,000 kg - Robot palletizer | ABB | IRB 460 | 4-axis robot, 110 kg wrist load, 2.4 m reach, vacuum gripper for 6, 12 and 24 packs in both can formats - Pallet magazine | automatic, holds 8 to 10 empty pallets - Pallet conveyors | heavy-duty roller conveyors - Pallet stretch wrapper | automatic inline turntable wrapper, 2,000 mm turntable, loads up to 1,200 x 1,200 x 1,800 mm, 20 to 30 pallets/h, Siemens PLC and touch screen Knedez Dv Uyspfx Albsc Condition New and unused, packed in export wooden cases. The photos show reference machines of the same models from the manufacturer's documentation. Availability Immediately. Location: Serbia.

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, Glue applicator for window glulam .Width of rollers 250 mm .Dispensing troughs .The applicator also has a glue tank with dispenser on top .Machine after renovation .Overlaying rollers new. Machine has input and output conveyor .Machine fully operational complete and after overhaul . Kedpot N H R Eefx Albenc

Condition: used, mileage: 58,515 km, power: 96 kW (130.52 HP), first registration: 03/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,986 mm, total width: 2,059 mm, total height: 2,547 mm, loading space length: 3,350 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and interim sale excepted! Internal number: 1171. PU05544 ----EQUIPMENT - Double rear wing doors 256°, without windows Kodpsz Edvzofx Albjnc - Speed limiter 130 km/h - LED lighting in cargo area - Cargo area floor – wood - SVO: Express Line Package - Side wall panels up to roof height - 6-speed gearbox - ABS, EBD, and DRIVER ASSISTANCE - Driver's airbag - Exterior mirrors electrically adjustable and heated - Battery: Extended battery life - On-board computer - Roof, medium height - Double rear wing doors/180° (without windows) - Tachometer - Third brake light - Electrically operated front windows - Electronic parking brake - Ford Easy Fuel - FordPass Connect - Halogen headlights with daytime running lights - Lockable glove compartment - Interior lighting with delayed switch-off - Automatic climate control - 70 l fuel tank - Paint: Solid color paintwork - Cargo compartment lighting - Emergency call assistant - Package: Technology Package 2 - Particle filter: Diesel particulate filter - Radio: 12" multi-function display & Ford SYNC 4 - Tire pressure monitoring system - Wheels: Full wheel trims - Wheels: Tire repair kit - Wheels: Steel 6.5 J x 16 with 235/65R16 - Windshield wipers with rain sensor - Sliding door: sliding door, right - Rear mud flaps - Side protection strips - Power steering - Seatbelts - Seats: Seat Package 18A - Start-stop system - Partition wall (plastic) at B-pillar height - Rear entry step - Air recirculation system - Lashing eyes - Immobiliser - Heat insulating, lightly tinted glazing - Central locking with remote control - Overhead storage compartment at the front ... and much more. ----The vehicle is in unprepared/untouched condition! Nationwide delivery possible for an additional charge. Errors and interim sale excepted. We are happy to consider your vehicle for trade-in. Financing / leasing possible even with no down payment! Do you have any questions? We are happy to advise you!

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, outer diameter: 1,600 mm, total height: 1,600 mm, total length: 1,400 mm, total width: 800 mm, inner diameter: 470 mm, input voltage: 400 V, overall weight: 850 kg, Equipment: documentation/manual, Year of manufacture: 2009 Load capacity: 1500 kg Coil inner diameter: 470 - 630 mm Coil outer diameter: 1600 mm Speed: 12 revolutions/min Frequency inverter Dimensions: approx. 1.7 x 1.4 x 1.7 m Weight: 850 kg Original documentation included, ready for immediate use. Knedpfx Alsz Riz Ijbsc

Condition: used, mileage: 95,000 km, power: 235 kW (319.51 HP), fuel type: diesel, gearing type: automatic, first registration: 07/2021, next inspection (TÜV): 07/2028, emission class: euro6, color: white, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, soot filter, Special equipment: Ksdpfx Aez Iidpslbjnc AMG Line interior, Chrome interior package, Stainless steel pedals in sports design, AMG floor mats, Seat cover/upholstery: Artico/Dinamica imitation leather, Sports seats in front, Steering wheel (Nappa leather, flat bottom), Steering wheel (sports) with multi-function, Roof rack/base carrier, Black headliner, Night package, Diamond-look radiator grille, Exterior mirrors painted black, Black roof rails, Rear and rear window tinted, Light alloy wheels, Light alloy wheels, Side running boards (aluminum), Solid paint finish Polar White Additional equipment: Passenger airbag can be deactivated, Airbag driver/passenger side, Acoustic ambient protection (exterior sound), Ambient interior package, Chrome interior package, Seat cover/upholstery: Artico imitation leather, AC charging system, Exterior mirrors electrically adjustable and heated, both, Chrome package, DAB tuner (digital radio reception), Design and equipment line AMG Line, AMG optics/styling package 1, Diamond-look radiator grille, Light alloy wheels, Light alloy wheels, Electric motor 100 kW (hybrid drive), Electronic traction system (ETS), Lowered suspension, Vehicle setup (online services/apps), Vehicle monitoring (vehicle location system), Power windows electric front + rear, Luggage compartment cover/roller blind, Rear lights LED, Hybrid 235 kW (engine 2.0 liters - 143 kW diesel), Isofix mountings for child seat on rear seat, Body: 5-door, Automatic climate control (Thermatic), Knee airbag driver side, Instrument cluster with variable display (widescreen cockpit), Communication module (LTE) preparation Mercedes me connect, Head airbag system (window bag), Charging cable with Schuko plug, Mercedes-Benz emergency call system, Navigation system: hard drive navigation, Parking package, Driving assistance system: active parking assist, PRE-SAFE system, Wheelbase 2995 mm, Rear seat back divided/foldable, Low emissions according to emission standard Euro 6d, Side airbag (side bag) front, Service system: Extended navigation services, Seat heating front, Smartphone integrated, Mirror package, Exterior mirrors electrically foldable, Exterior mirrors with ambient lighting, Exterior/interior mirror with automatic anti-glare function, Voice control system with extended functions (MBUX), Underride protection (chrome), USB connections

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale is a complete, modern production line for manufacturing and processing electric motor stators, produced by the reputable NIDE Group (year of manufacture: January 2017). The machines are fully automated (CNC/PLC control) and formed a cohesive production flow within the facility. The equipment has CE certification. The complete line consists of 5 processing stations: Coil Winding Machine: Model RXL2-160. Winding Inserting Machine: Model QX1-150/160. Middle Forming Machine: Model Z2XJ1-160/190. Double Side Lacing Machine: Model BXIIL1-160/160 (with a rotary table integrated into the process). Final Forming Machine: Model Z3XJ1-200/210T (with its own hydraulic power unit). Ksdpfxjzuukqo Albonc Along with a comprehensive set of tooling! We also sell the original toolboxes containing mandrels, forming heads, and dies, which enable quick changeovers for production (as seen in the photos). The line is ready for loading from the warehouse in Ostrzeszów. Please contact us.

Condition: excellent (used), Year of construction: 2015, Brand: Makor Type: Robospray Twin Year: 2015 Inner dimension L: 670 cm Inner dimension W: 330 cm Inner dimension H: 213 cm Exhaust system: Yes Electric connection: 400 V Dimension L: 11000 mm Knodoiu Hbnspfx Alboc Dimension W: 4600 mm Dimension H: 4500 mm Includes - 2x electric foil roll-off units; - 1x Beerepoot mobile roller conveyor

Condition: excellent (used), Gluing line OBEL-P gluing length - up to 3 m Kedpfx Aleirm Rhsbonc gluing width - up to 200 mm The OBEL-P gluing line is a high-frequency (HF) press system designed primarily for applications in woodworking, particularly in the window and door industries. Known for its versatility, it can process materials such as window scantlings, laminated wood beams, and glue boards. OBEL-P’s HF gluing lines are manufactured with a range of configurations, from manual to fully automated setups that handle tasks like automatic loading, gluing, pressing, and stacking, maximizing efficiency and minimizing manual intervention. Key specifications for OBEL-P gluing lines include adjustable HF output ranging from 40 to 200 kW, rapid glue application speeds up to 300 meters per minute, and modular designs that allow for additional automation as needed. These lines can achieve high production capacities, with some systems producing up to 150 m³ of output per shift.

Condition: good (used), Production line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robots BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 2700mm Max working height: 180mm Max working width: 500mm Max working width with round end: 350mm Max speed working table: 15m/min Max table return speed: 50-100m/min BACCI DOUBLE JET DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces. Knjdjt Tw S Ujpfx Alboc

Condition: good (used), Production line consisting of: - BACCI FC 8 Ksdpet Txfpofx Albenc - BACCI DOUBLE JET - KUKA robots BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 4000mm Max working height: 180mm Max working width: 500mm Max working width with round end: 350mm Max speed working table: 15m/min Max table return speed: 50-100m/min BACCI DOUBLE JET DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Condition: used, Fully automatic scarf jointing line for the following dimensions: thickness: approx. 24 – 100 mm, width: approx. 80 – 240 mm, scarf joint lengths: 400 – 1,500 mm, finished length: 2.50 m – 13.50 m, infinitely adjustable. Consisting of the following plant components: - SMB vacuum stacking system, longitudinal, with 2 lifting tables and 2 package conveyor lines, year of manufacture 2013, package dimensions max. 1.20 x 1.20 x 6.00 m, 4 suction pads, Sicko system, singulation and infeed into a conveyor line for scanner feeding, board turner, diverter for too moist, too dry, diverter for B-quality, marking station or automatic operation - Bidac end-face scanner for scarf joint detection, year of manufacture 2013 - Brookhuis moisture measurement FMI 5, year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras, and new optimization software - Dimter Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009, and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT scarf jointing system with rotary table, special pack AH 1050, year of manufacture 2005, consisting of: milling machine, tipping station, infeed section, length 5.0 m, cycle press, length 6.00 m, crosscut saw - SMB stacking machine, year of manufacture 1998, length 2.50 – 13.50 m, divisible into 2 units (e.g. 2 x 5.0 m), 8 stacking arms, 8 stacking tongues, manually adjustable stop, infinitely adjustable, electro/hydraulically controlled, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package ejector. Kjdpevvi Tysfx Albjnc Location: Customer

Condition: used, Year of construction: 2001, machine/vehicle number: LC651, Used KRONES filling line for Vodka - glass 6000 BPH - Year 2001Technical Specifications & Performance DataThis complete glass bottling line, engineered around Krones equipment, is optimized for still strong spirits in non-returnable glass bottles. Configured with a dedicated rinser, a vacuum filling monoblock, a dual-carousel cold-glue labeling and tax-stamp system, and tray-plus-film secondary packaging, it delivers consistent performance for premium spirits presentation.Year: 2001Nominal speed: 6,000 bph on 0.7L formatContainers: Non-returnable Glass bottles; shapes handled: round, flask, shtoffFormats supported: 0.2L, 0.25L, 0.37L, 0.375L, 0.5L, 0.7L, 0.75LRinser: Krones Varioject 1440-24-188; rotary, 24 nozzles; single-channel; fixed nozzles; pre-treated water; gravity draining; no air blowFiller-Capper: Krones Vacufill 960-024-124-V; vacuum filling for still spirits; 24 filling valves; capper with 4 headsClosures: ROPP aluminum and Guala non-refillableLabeler: Krones Prontomatic / Taxomat 720-9-3-180 TA; cold glue; pre-cut paper labels; U-shape tax stamp 160 x 20 mmPacker: MEYPACK VP410; tray + filmConveyors: Krones Synco S bottle conveyors; Krones pack conveyorsControls: Siemens S7 PLC; electrical cabinets includedAdvanced Automation & Control SystemsThe line integrates centralized automation using a Siemens S7 PLC for reliable sequencing of rinsing, vacuum filling, labeling, and packaging. Electrical cabinets are included, supporting line interlocks, safety circuits, and device control. The rotary platforms and mechanical cam systems in the labeling/tax-stamping station ensure repeatable precision at rated speeds, while format-specific change parts support quick, accurate format transitions.PLC/HMI: Siemens S7 PLCControl architecture: Centralized line control with machine-to-machine interlocksSafety: Emergency-stop circuits and guarding typical of Krones rotary equipmentChangeover: Format parts for multiple glass shapes and volumesProduction Line Integration CapabilitiesDesigned for cohesive in-line operation, this used bottling line connects rinsing, vacuum filling, cold-glue labeling with tax stamping, and tray-plus-film packaging via Krones conveyor systems. It is ideal for second hand industrial packaging upgrades in beverage production focused on spirits in glass bottles. The broad format coverage supports brand portfolios requiring flask and shtoff bottles across multiple sizes.Machine typeManufacturer / ModelYearVarious EquipmentKrones Synco S (Conveyors) Kedpfxjz E Di Uo Albenc

Condition: used, Year of construction: 2019, machine/vehicle number: LC681, Used complete 10hl craft brewery lineTechnical Specifications & Performance DataThis complete 10 hl craft brewery and bottling line is built around a BBC INOX Essential 1000 steam-heated, two-vessel brewhouse. Designed for bottle-conditioned beer production, the plant combines brewing, fermentation, glycol cooling, gravity filling, labeling, crown capping, cold storage, cleaning and handling equipment in one integrated industrial packaging installation.Brew length: 10 hl / 1,000 L per brewBrewhouse: BBC INOX Essential 1000, two vessels, AISI 304 stainless steel, steam heatedHot liquor tank: 2,000 L AISI 304 tank with internal steam coilFermentation: 3 x 18 hl gross-volume cylindro-conical fermenters, approximately 15 hl working volume eachFilling system: six-head linear gravity bottle filler, 480 L/hBottle formats: compatible with 0.33L, 0.5L and 0.75L bottlesWort cooling: Kelvion plate heat exchanger, 2,000 L/hCellar output: approximately 700–800 hl/year with the installed fermentation capacityAdvanced Automation & Control SystemsThe brewhouse is equipped with a digital control panel featuring recipe programming, with capacity for 15 stored recipes, brewing-temperature display and control, and management of the wort pump and lauter rake. Individual temperature controllers on the fermenters support controlled glycol cooling across cone and shell zones.The semi-automatic OMB labeling machine uses an electric drive, label photocell and micrometric adjustments for accurate front and back label application on round bottles. The bottling section includes quick couplings and supply hoses, while the pneumatic AIR-MATIC crown capper requires compressed air for operation.Power supply: 380–400 V, three-phaseOMB labeling machine: 230 VMalt mill motor: 1.5 kWGlycol operation down to -5 °CProduction Line Integration CapabilitiesThis used bottling line forms part of a complete brewing and beverage production plant. The process moves from malt milling and wort production through cooling and fermentation, followed by priming, gravity filling, labeling, crown capping and cold-room bottle conditioning. It is suited to craft beer operations requiring a compact, coordinated production line with packaging machinery for glass bottles.Machine typeManufacturer / modelYearVarious EquipmentBBC INOX Essential 1000 Brewhouse2019ChillerMonobloc glycol chillerFilling MachineLinear gravity bottle filler... Kodpfx Ajz E Dfcelbsnc

Condition: used, Year of construction: 2017, machine/vehicle number: LC677, Used Wild GoosePak canning line - Year 2017Technical Specifications & Performance DataThis used bottling line is a 2017 Wild Goose 4-head canning line configured for industrial packaging and beverage production in standard LOE aluminum cans. The line is identified as WGC-250 and includes Wild Goose M-250 equipment together with a Wild Goose Paralleltrain unit. It is configured for three established can formats, allowing operators to run multiple retail pack sizes within the same second hand canning system.Manufacturer: Wild GooseLine model: WGC-250Year: 2017Configuration: 4-head canning lineCan formats: 0.355L, 0.473L and 0.568L standard LOE cansElectrical supply: 110 VAdvanced Automation & Control SystemsThe line is described as functional and is arranged as an integrated can handling and filling solution. The supplied information does not identify a PLC type, while the 110 V electrical requirement should be considered during commissioning and site electrical planning. The equipment is supported by available manuals and spare parts, helping maintenance teams prepare routine service procedures and operational changeovers.Safety guards are not included. A buyer should evaluate the safeguarding arrangement, operator access points, interlocks and emergency-stop integration as part of installation planning and before production use.Production Line Integration CapabilitiesThis Wild Goose canning line combines depalletizing, can turning or rinsing and 4-head canning functions in a compact process arrangement. Empty aluminum cans are supplied from the depalletizer, pass through the twist rinser section and continue to the M-250 canning equipment. The configuration is suitable for integration with upstream product preparation and downstream coding, secondary packaging, palletizing and conveying equipment according to the required beverage production layout.Machine type/categoryManufacturer/modelYearDepalletizerWild Goose2017Can Twist ConveyorWild Goose Paralleltrain2017Filling MonoblockWild Goose M-2502017Machine Condition & Maintenance HistoryThe equipment is stated to be functional, supporting its use as a used bottling line for buyers seeking a ready-for-operation canning solution. Manuals are available and spare parts are available. Maintenance records are not supplied, so standard pre-installation inspection, cleaning, functional testing and service planning remain important steps for a smooth handover into production.Operational Performance & Versat... Knedpfxez E Df Ae Albec

Condition: used, Milling head FC-10KZ6: Milling spindle: 50 mm Motor: 18 kW Spindle speed: 6000 rpm Tool dimensions: 250/50 mm Dust extraction nozzle diameter: 150 mm Chipper: 300 mm x 8 mm Chipper motor: 6 kW - 3000 rpm Dust extraction nozzle diameter from chipper: 80 mm Working width of the table: 600 mm Board thickness: 20-50 mm Working height: 25 - 120 mm Length of glued board: 200 - 600 mm Table drive: electromechanical Feed rate: 3 - 30 m/min, steplessly controlled Glue applicator: special glue unit with comb Loading of glued boards: manual, onto a loading belt system Remaining operations: automatic Press FC-10PZ6/2: Width of glued board: 25 - 120 mm Thickness of glued board: 20 - 50 mm Length of finished board: 6000 +20 -50 mm Pressing: hydraulic Hydraulic cylinder: 100 mm Hydraulic unit: up to 100 bar Unit motor: 3 kW - 1500 rpm Cut-off saw: 400 mm Saw motor: 3.5 kW Set performance, depending on the material used: up to 4 cycles/min (up to 4 six-meter strips/min) Dimensions: Length: 13600 mm Width: 3800 mm Height: 1850 mm Knodpsy Ud Uuefx Albjc

Condition: new, Year of construction: 2023, Coperion ZSK 27 MV Plus extrusion line. Application: Pet food and dental sticks. Year: 2023, never used, still in its original packaging. Kjdexr Hgxjpfx Albsnc

Condition: excellent (used), Year of construction: 2006, 513 USED KEMPER MINI QUADRO ROUND bun divider-rounder. Line for rolls, ciabatta, and bread. Production: - square and elongated buns - round buns - stamping/marking Knsdpfszugm Dsx Albsc - 4 rounding drums - moistening station - seeding station TECHNICAL DATA: - year of production: 2006 The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, Consisting of: “GEA-CFS” battering machine Type ER 900 all stainless steel belt width 900 mm mobile mesh width 5 mm adjustable speed with air knives with batter pump outside dimensions (l x w x h) : ± 1.700 x 1.500 x 1.700 mm + “GEA-CFS” breading line Type PR 900 2,83 kW suitable for standard belt width 900 mm mobile adjustable speed adjustable working height Knjdszza Alspfx Albjc with air knive outside dimensions (l x w x h) : ± 2.800 x 1.200 x 2.100 mm

Condition: excellent (used), EDGE BANDING and CNC Flexible through-feed DRILLING and ROUTERING LINE Min/Max workpieces (panels) width (X axis) with Flexa 912: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with Flexa 912: mm 12 / 50 Min/Max workpieces (panels) length-depth (Y axis) with Flexa 912: mm 100 /1350 (o 650+650) 238000A) “DOUCET” motorised roller conveyor for feeding panels to the “HOMAG” edge-bander 238000B) “HOMAG” edge-banding machine, Model KL 73/A3/S2 238000C) “DOUCET” motorised roller conveyor for feeding edged panels to “MORBIDELLI” Flexa 912 238000D) “MAHROS” 90° transfer unit (infeeding “MORBIDELLI” Flexa 912) 238000E) "MORBIDELLI" Gantry (Portal) CNC (Drilling and Routering) Mod. Flexa 912 - N. 2 upper working head, EACH consisting of: - 1 type T35M drilling head with 35 vertical spindles (21 on the Y-axis + 14 on the X-axis) - 1 (movable) drilling head with 14 vertical spindles (on the Y-axis) for fittings - 2 heads with 2 horizontal spindles each (4 total) on the Y-axis - 1 HKS 63 vertical electric spindle (6.6 kW) - N.2 horizontal units (1 R + 1 L) EACH with 21 drilling spindle (21 + 21 = total 42) 238000F) “MAHROS” 90° transfer unit (outfeeding “MORBIDELLI” Flexa 912) 238000G) "RBO (BIESSE)" Stacker (Bridge Frame), double station Mod. Selecta SC Kedpfozza Rvsx Albenc

Condition: new, mileage: 20 km, power: 129 kW (175.39 HP), first registration: 05/2026, fuel type: diesel, fuel: diesel, brakes: retarder, color: other, gearing type: automatic, emission class: euro6, number of seats: 24, total length: 7,700 mm, total height: 3,100 mm, Year of construction: 2026, Equipment: ABS, USB port, air conditioning, retarder, = Additional options and accessories = - Air conditioning (driver) - Air conditioning - Webasto heater = Further information = Damage: none Kodpfx Aloy N Utwebjnc = Company information = We are an international company based in Belgium, near Brussels (approx. 20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses and offers an extensive parking area serving as a showroom. We always have numerous buses of all brands, capacities, models, and in every price range in stock. We can find the right coach, school bus, or city bus tailored to your needs and budget. All information is provided without guarantee. Errors, prior sale, and typographical errors reserved. Viewing hours for used buses: Mon.-Fri.: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: ZE60 A- Econ EUP 600, Stock- No.: 2858 1 used, partly overhauled and tested compounding-pelletizing line, consisting of: Berstorff ( Krauss Maffei ) compounding extruder Knsdpey At N Refx Alboc Type ZE 60 A - 34 L/D twin-screw co-rotating extruder Extruder drive 160 kW AC Degassing with vacuum pump Laser separating head / melt filter Eprotec Melt x10 melt pump ECON EUP 600 underwater pelletizing system, complete with Start-up polymer diverter valve incl. hydraulic Water system, complete incl. pellet spin-dryer / centrifuge Control boards with Siemens Touch panel >> 12-month PLASTICO warranty OPTIONAL at extra cost: Material conveying Gravimetric loss-in-weight dosing-blending Granule classification Pellet filling station for Big Bags or Octabins Start-up in your factory by our Technicians We have more complete compounding extruders, pelletizing systems, loss-in-weight gravimetric blenders & more in Stock. Visit us in D 42329 Wuppertal or send us your inquiry, you´re welcome.

Condition: used, functionality: fully functional, FAMAD PDFD-I Wood Jointing Line 1. FAMAD DFC-60M Milling and Tenoning Machine Unit Input element length 170-900mm Milling height 20-155mm Milled element package width 650mm Carriage operating speed: Work 10-23m/min Return 32m/min 2. PHSL Pressing Unit Glued element width 35-155mm Glued element thickness 20-70mm Glued element length min/max 4500-6600mm Possibility of programming inter-cuts Knsdpsw Iy Nyjfx Albjc Line capacity up to 4000mb/shift 3. General information Length 15700mm Width 3350mm Power demand 48kw Year of production 2006 Very good condition

Condition: used, Board packaging line Roller conveyor Cross chain conveyor Board hill Knedpfx Alexlgf Ijboc Packer Pack elevator Designed for boards up to 6 m long

Condition: used, Year of construction: 1962, rockwell hardness . brinell hardness . Hardness tester Rockwell measurement with underframe table Kedpswugq Sjfx Albenc all technical data without guarantee