Used Hall Heating Hot Air Generators for sale (38,156)

Condition: good (used), Reznor UDSA Gas Hot Air Generator Gas WLE Type: UDSA050-4E Gas appliance Type: BSP-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.90 mbar Max. Nominal heat load (Hs) QN: 58.60 kW Max. Nominal heat load (Hi) QN: 52.80 kW Min. nominal heat load (Hs) QN: Min. nominal heat load (Hi) QN: Max. nominal heat output: 48.58 kW Nominal heat output: 48.58 kW Min. nominal heat output: Supply voltage: 230V 1N ,50Hz Air flow rate: 5180 m3/h Protection class: IP20 Pin no. 0461BN0677 UDSA gas hot air generator - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Fsdpfswb Axrjx Adpsfw Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heating output up to 50% EC technology ErP Ready These devices are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may install the gas WLE and connect the gas and flue gas side. The gas WLEs are suitable for: - natural gas or LPG operation - recirculation operation - intake temperatures below 5°C with stainless steel heat exchanger * - heating operation 1-stage or 2-stage* Control via room thermostat and heating control switch - ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outside wall, version C ° Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: like new (used), functionality: fully functional, Cooking Modes AC (Automatic Cooking): Automatic cooking system with recipe images. Manual Cooking: Fan-assisted (30–300 °C), Steam cooking (30–130 °C), Combination (30–300 °C). Programmable Operating Mode: Up to 15 cooking cycles can be saved, with name, image, and recipe information. Clima®: Automatic humidity control. Fast-Dry®: Rapid dehumidification of the cooking chamber. Functionality Display: Customizable, frequently used programs are displayed prominently. One-Touch Start: Automatic start of cooking. Recipes: Folder structure with preview and intelligent recognition. Screen: 7" high-resolution LCD TFT touchscreen. Operation: Scroll wheel with push function. Controls & Features Auto-reverse: Fan reverse for even cooking. Delta T: Monitors cooking chamber and core temperatures simultaneously. Steam Regulation: Automatic condensation adjustment. Settings: Programmable user parameters. Delayed Start: Scheduled cooking times. Fan Speeds: 6 selectable speeds, automatic heat adjustment. Core Temperature Probe: Four-point probe with external interface. USB Port: HACCP data, software updates, cooking programs. Energy Optimization: SN system (optional). Service Program: Diagnostics, maintenance indicator. Self-Diagnosis: Pre-use check, audible/visual warnings. LED lighting for improved visibility. EcoSpeed: Optimized cooking temperature, reduced fluctuations. EcoVapor: Automatic steam regulation for water conservation. Cleaning & Maintenance LCS (Liquid Clean) System: Automatic cleaning with recyclable capsules. 7 cleaning programs. Manual cleaning: Optional hand shower. Fjdpev Hztajfx Adpjfw Technical specifications Capacity: 7 × 2/1 GN – 14 × 1/1 GN Insert spacing: 70 mm Space for croissants: 70 / 180 pieces Dimensions: H x W x D 850 × 1170 × 950 mm Weight: 180 kg Power: Total 19 kW, Cooking chamber 18 kW, Fan 0.55 kW Power supply: 3N-AC 400 V, 50/60 Hz, 30 A Base frame Material: Stainless steel Mobile: Yes (with casters) Dimensions: H x W x D 860 × 1170 × 800 mm Financing through our bank is also available. komplett-konzept.leasingo.de

Condition: good (used), Reznor UDSA gas air heater UDSA gas warm air heater - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation with CE system certification, version B or C Compact design for easy installation even heat distribution Vertical and horizontal air guide fins as standard Modulation of the heat output up to 50% EC technology ErP Ready Ffodpfx Adewb A Hijpew These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may carry out the installation of the gas WLE and the gas and flue gas connections. The gas WLEs are suitable for : - Natural gas or liquid gas operation - Recirculated air operation - Intake temperatures below 5°C with stainless steel heat exchanger * - 1-stage or 2-stage heating operation* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outer wall, version C ° Gas WLE type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. Nominal heat load (Hs) QN: 66.04 kW Max. Nominal heat load (Hi) QN: 59.50 kW Min. nominal heat load (Hs) QN: 33.02 kW Min. nominal heat load (Hi) QN: 29.75 kW Max. Nominal heat output: 54.74 kW Min. nominal heat output: 26.92 kW Supply voltage: 230V 1N ,50Hz Air flow rate: 5830 m3/h Protection class: IP20 Pin no. 0461BN0677 Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: new, Year of construction: 2025, The KANTENKING is the most favorable edge processing solution for creating the zero joint for the trades with feed speeds from 10m / min, as well as in the industrial sector, with high speeds up to 22 m/min. The Kantenking HTK3030 has a speed of max. 22 m/min.. Your edge edger is still "in good condition", but you have already heard a lot about the null joint and ask yourself, if this is also suitable for you. You can retrofit the HOT-AIR system in any existing edge banding or BAZ. The Hot-Air-System has low maintenance and reliable. You tell us your wishes and machine data. So we can together with you and your ideas make an offer for the optimal product. Feed speeds up to 22 m/min. are possible. The Hot-Air-System is optimally integrated in your edge banding or machining center. Ffedpfx Aod Dczzjdpsw Please don't hesitate to contact us.

Year of construction: 2020, condition: like new (used), functionality: fully functional, total length: 1,100 mm, total width: 865 mm, total height: 1,800 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 02/2027, Baking Oven Unox Bakertop 6 Convection oven for 6 trays 60x40 cm Exhaust hood with steam condenser on top Proofing cabinet below for 6 trays 60x80 cm Oven with USB port Only with us – DGUV V3 inspected Connection: 400V, 14 kW, 32A-CEE plug Ffjdjygc Ucopfx Adpsw Water connection 3/4", water drain DN 40 Dimensions: 865 x 1100 x 1800 mm (WxDxH) Used oven, SAB tested With warranty + spare parts service Options: Pure water filter Baking trays Ethernet connection DDC.App Spray & Rinse cleaner Service package Maintenance contract Delivery service Training & commissioning Visit our large showroom!

Year of construction: 2018, condition: used, functionality: fully functional, We offer this used Wolf WK-com N-W B127 Air Handling Unit with heat recovery (HRV) and Panasonic cooling, year of manufacture 2018. Nominal air volume flow (20 °C): 7,500 m³/h Nominal air volume flow (20 °C): 2.08 m³/s Total pressure difference (tot. Δp stat.): 721 Pa External pressure difference (ext. Δp stat.): 400 Pa System efficiency η: 67.0 % Fan speed at operating point nᵥ: 1,357 rpm Maximum fan speed nᵥ max: 1,550 rpm Current consumption at operating point Iᵦ: 3.4 A Nozzle differential pressure Δp Dü: 593 Pa Calibration factor k: 308 Motor rated power Pₙ: 3.4 kW Ffedpfx Asyir Nzjdpjw Motor rated current Iₙ: 5.4 - 4.2 A Rated voltage Uₙ: 3~380..480/50 V/Hz Control voltage at operational point: 8.8 VDC If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: excellent (used), Heat exchanger, shell-and-tube heat exchanger, liquid cooler, Baltimore Aircoil International BAC F100, used machine Fedeyfnulspfx Adpjfw Manufacturer: Baltimore Aircoil International Type: BAC F100 Year: 2015 Pressure: -10 / 10 bar Temperature: -20 / 82 °C Medium: Water / Glycol

Condition: ready for operation (used), There are two identical machines available, including documentation. Fjdjm Rg R Ajpfx Adpefw

Year of construction: 2018, condition: ready for operation (used), Diameter of process lines/regeneration drain lines/compressed air lines: 50mm/50mm/8mm, max. inlet temperature: 34°C, max. hardness: 10/20°Fr, min./max. operating pressure: 2bar/8bar, min. degree of filtration: 5µm, max. glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, max. tank volume: 30dm³-200dm³, max. Glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, tank volume: 30dm³-200dm³, max. compressed air consumption: 300l-500l/h, machine dimensions X/Y/Z: approx. 800mm/650mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Fodpsuk I Etefx Adpsfw

Condition: good (used), Year of construction: 1998, gas heater WSG 100PA 9800m3 / h hall heating made by WSG 100PA Maximum air flow: 9800 m3 / h Fjdpfxshrnv No Adpofw heating power 110 kW Gas connection: 3/4 " gas: g20 natural gas axial fan 2pcs electric power: 230v 50Hz 0.62kw can be suspended mechanically adjustable slats honeywell gas regulator enclosure Size H: 150 cm SZ: 100 cm M: 155 cm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, cooling capacity: 56 kW (76.14 HP), type of cooling: water, input frequency: 50 Hz, heating capacity: 67 kW (91.09 HP), fuel type: gas, "SANYO" PANASONIC ECO G Gas heat pump air conditioner Model: SGP-E190J2GU2W Nissan K25 Engine Power source: 230 V AC, 1 Phase, 50 HZ Max electrical input: 1,16 kW, 5,4 A (Continuous) Unit protection: IP24 Cooling capacity: 56 kW Fsded Tiu Ejpfx Adpofw Heating capacity: 67 kW Heat input (HS)(Cooling): 43,5 kW Heat input (HS)(Heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high side: 30 bar Design pressure low side: 16 bar OUTDOOR USE ONLY! We have 4 pieces on Stock!

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Please note that the photos probably show two different ovens, both are very similar. Ffodpfsmrrwfex Adpsw

Condition: excellent (used), Hall heating system with Rlco gas burner. An oil/diesel burner can also be used if needed. Chimney is included—everything is complete. For further questions, please contact us. Fodped Tt Amefx Adpjfw In very good condition.

Condition: new, Electrically heated circulating air furnace (horizontal air flow) Ffjdpjdt R Uujfx Adpjw max. temperature: 550ᵒC useable dimensions (w x h x d): 900 x 1300 x 1800 mm charge weight: 800 kg gross heating power: 72 kW circulation fan: 1 x 7,5 kW

Condition: new, Electrically heated circulating air furnace (horizontal air flow) Fodjdhzimjpfx Adpsfw max. temperature: 650ᵒC useable dimensions (w x h x d): 1000 x 1000 x 2000 mm heating power: 72 kW circulation fan: 1 x 4 kW

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed McD factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Please note that the photos probably show two different ovens, both are very similar. Fjdpfjx Altfox Adpefw

Condition: excellent (used), functionality: fully functional, Unox Bakerlux Stefania Loading Oven Convection oven for 3 trays, 460 x 330 mm Stainless steel design with exhaust hood Manual control Direct water connection for steam injection 230V connection Dimensions: 600 x 665 x 720 mm (W x D x H) Used oven, cleaned Options: Water filter Maintenance contract Spare parts box Delivery service Instruction & commissioning Fodjyaf D Hepfx Adpjfw Visit our large Unox showroom!

Year of construction: 2026, condition: new, functionality: fully functional, Unox Bakertop X 10 Digital ID convection oven Convection oven for 10 trays 600 x 400 mm Unox oven with Intelligent Performance Touch panel with 1,000+ programs Core temperature probe USB connection Top model with AI DGUV V3 safety inspected exclusively by us Connection: 400V, 32A CEE plug Water connection 3/4 inch, drain DN 40 Dimensions: 860 x 1018 x 1219 mm (W x D x H) Oven NEW & SAB inspected 12 months warranty + spare parts service Fsdjyaf Dmjpfx Adpjfw Options: Pure water filter Baking trays Lievox proofing cabinet Ethernet connection for DDC.App Exhaust hood with vapour condenser Spray & Rinse cleaner Service package Base stand Maintenance contract Delivery service Commissioning & user training Visit our large showroom!

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: HFT.130, cooling capacity: 139 kW (188.99 HP), type of input current: three-phase, type of cooling: water, ambient temperature (max.): 40 °C, ambient temperature (min.): -10 °C, input voltage: 400 V, total width: 1,096 mm, total length: 3,355 mm, total height: 2,205 mm, heating capacity: 139 kW (188.99 HP), Hitema International HFT.130 AIR TO WATER REVERSIBLE HEAT PUMP Cooling Capacity: 139kW Heating Capacity: 139kW Heat pump with 2 scroll compressors, R410A refrigerant, brazed plate evaporator/condenser, condenser/evaporator coil with copper tubes and aluminum fins, AC axial fans. IP54 protection rating, chillers suitable for outdoor installation Fodox E S Tyepfx Adpsfw Technical data sheet available on request

Year of construction: 2008, operating hours: 8,000 h, condition: used, machine/vehicle number: 508202292, The OCHSNER GMLW 19 (often referred to as "GMLW 19 plus") is a high-performance air-to-water split heat pump from the OCHSNER Golf series, suitable for heating and domestic hot water production in single-family and multi-family homes. It offers heating outputs around 17 kW (for example, 16.8 kW at L2/W35) and is designed for efficient operation with heating surfaces such as underfloor heating or radiators. The split design allows for space-saving installation while delivering high efficiency and low operating costs, even at low outdoor temperatures. Key features: - Type: Air-to-water split heat pump (separate indoor and outdoor units). - Series: OCHSNER Golf Maxi Plus. - Output: Heating capacity approx. 17 kW (e.g. 16.8 kW at L2/W35). - Heat source: Outdoor air. - Heat emission: Suitable for underfloor heating (low supply temperatures) and radiators. - Domestic hot water: Usually provided by the heat pump itself with an additional storage tank. - Efficiency: Achieves high efficiency levels even in colder conditions thanks to special evaporator technology. - Installation: Easy installation due to the split design; does not require ground collectors. Fsdeybv Urjpfx Adpefw Areas of application: - Ideal for properties with a heated area of approx. 300-350 m². - Perfect for retrofits and new buildings, as it can be integrated with existing heating systems (underfloor heating, radiators). This is a used air source heat pump.

Condition: ready for operation (used), Global HS-8307 Hot air welding machine Fjdpfx Adevaxfajpefw Automatic strip cutter You are welcome to come by for a viewing. We can also arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: good (used), fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: GEA Happel, air heater heat exchanger -Type: 4114/403/441 -Fan: Ziehl-Abegg -Operating pressure: max. 13.4 bar -Number: 2x air heaters available Fjdpsu Tytaefx Adpjfw -Price: per piece -Dimensions: 710/550/H495 mm -Weight: 60 kg/piece

Year of construction: 2015, condition: used, Fan heater, electric heater, heater, electric heater, electric fan heater, heat exchanger, air heater, air heater, duct air heater, duct air heater Ffsdpfxsfixa Ho Adpjw -Eltra item no.: 1BGL1CE04001 -Power: 30kW -Voltage: 467VAC -Dimensions: 460/350/H535 mm -Weight: 23kg

Condition: good (used), Heating fan, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 2-stage 157000573036 Ffedpfx Aou N Sibodpsw -Power: 53.5/64.9 kW -Fan: Ziehl-Abegg -Operating pressure: max 16 bar Quantity: 1 piece available -Dimensions: 800/390/H880 mm -Weight: 49 kg

Condition: good (used), fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 2-stage 157000573036 -Power: 11.4/14.7 kW -Fan: Ziehl-Abegg -Operating pressure: max 10 bar -Number: 2x air heaters available Fsdju Scqhspfx Adpsfw -Price: per piece -Dimensions: 800/710/H730 mm -Weight: 49 kg/piece