Used Hakomatic B 655 S for sale (84,342)

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier -Manufacturer: Bachmann, electronic module valve amplifier from Battenfeld injection molding machine Cjdsg Tizxjpfx Ab Iora -Type: CPPV 200 SB 7621/00 -Quantity: 1x module available -Price per piece -Dimensions: 125/85/H30 mm -Weight: 0.2 kg/pc.

Condition: ready for operation (used), MAC115D-1-DS-S-F/180-B-0 Permanent magnet motor, hole spacing of the mounting holes: 152 x 152 mm, Ø drive shaft: 32 mm, used, normal signs of wear, 100% functional ATTENTION: Please inquire charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Codji D Ngkepfx Ab Isra

Condition: like new (used), Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Static autoclaves: these are suitable for any format and are used for food packaged in cans, jars and other flexible materials. CHARACTERISTICS: * Forced ventilation *Shower system. * Temperature and time recorder. CONSUMPTIONS: - Steam: Maximum flow rate 2100 kg/h. Approximate consumption 475 kg/cycle. - Electrical energy in KW: 22kw - Cold water in tn/hr: Flow rate 25m³/h. - Compressed air in m³/min. The theoretical required to cool the autoclave in the worst air requirement condition (empty or with low load) is 2.91 m³/minute. - Total amount of drainage in ton/day: Depends on the number of cycles. Approximately 0.8 m3/cycle will be drained from inside the autoclave at the end of the cycle. The water output of the exchanger will be the same as the water input during cooling, 25 m³/h. Cedpfx Abex S Ipws Isra - Total raw water consumption in tn/day: 0.8 m³/cycle final + 12-16 m³ cooling.

Year of construction: 1992, condition: used, Raimann B110S band saw Roller diameter 1100mm Roll width 100mm Credpfob R Ty Asx Ab Iea Cutting width right and left of saw blade 200mm Cutting height max. 400mm

Condition: good (used), Ride-on Scrubber Dryer Hakomatic B 750 R – used - : Price ex location: only €1,250 (net)! The battery is deeply discharged, possibly defective! Manufacturer: Hako Model: Hakomatic B 750 R Year of manufacture: unknown Codpfx Asx El S Aob Ijra Serial number: 7090205065514 Operating hours: 850 h Battery is deeply discharged Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: ready for operation (used), Rexroth HCS01.1E-W0003-A-02-B-ET-EC-NN-S4-NN-FW single-axis converter IndraDrive MNR: R911340075 S:7260408025786, used, in good condition, 100% fully functional, scope of delivery as shown in the photos. Codpfx Aex Dw S Ajb Ijra

Year of construction: 1995, condition: used, Max. sawing length: 5,000 mm Max. saw blade diameter: 500 mm Automatic positioning via diamond control of length and angles Angles can be swiveled inwards and outwards (20-135°) Crodpsv Ip T Dofx Ab Ija Moving roller conveyor Soundproof cabin Minimum quantity spray device chip conveyor belt Weight: approx. 2,800 kg

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: Nr.50086, New machine for sale due to circumstances: 6 connection points with ventilation duct. Collection only! Price ex location 31637 Rodewald. Crsdpfx Aew Uf S Hsb Ioa

Condition: excellent (used), Year of construction: 2004, Arburg 630 S 2500 - 1300 with robot Multilift H mit B-Actise (2004) Clamping force: 250 t Tie-bar spacing: 630 × 630 mm Platen size: 900 × 900 mm Mold height (Min / Max): 300 – 700 mm Maximum daylight (open space): 1,300 mm Opening stroke: 600 mm Credjxwxciopfx Ab Isa Ejector stroke: 225 mm Ejector force: 86 kN Screw diameter: 55 mm Shot volume: 558 cm³ Injection pressure: ~2,380 bar Number of heating zones: 12 Control system: Selogica Machine dimensions: 6.4 m × 2.1 m × ~2.2 m (L × W × H) Machine weight: 14,000 kg Installed power / electricity: ~68 kW Robot / automation interface: Euromap 2500‑1300 Core pullers: hydraulic

Condition: used, The Samputensili S 500 B bevel gear cutting machine was designed as a universal machine for flexible machining of gears and is used by manufacturers in gear and transmission technology for the milling of bevel gears. Technical data: Gear diameter: 500 mm Module – max.: 5 Tooth width: 100 mm Space requirement approx.: 4.5 x 3.2 x 2.4 m Machine weight approx.: 13,000 kg *The illustration shows the machine in its current used condition. Upon request, it can be supplied partially modernised, or as a completely retrofitted and modernised machine with new CNC control (SIEMENS ONE). Crsdpfx Aoxz Ef Seb Iea

Condition: excellent (used), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 31927596, available immediately: RENNER Riko 960/270 ST-KT piston compressor with sound box with star-delta starter Csdpsxzgilofx Ab Isra Technical data: Motor power: 5.5 kW Rated voltage: 400V Max. pressure: 10 bar Delivery quantity at 7 bar: 740 l/min Cylinder / Stages: 2/2 Sound level: 69 dB(A) Dimensions L x W x H: 985 x 722 x 802 mm Weight: 206 kg We always have a large selection of new and used compressors in stock! Available immediately.

Condition: used, operating hours: 172 h, overall weight: 1,500 kg, fuel type: electric, HAKO Automatic Cleaner and Scrubber-Dryer Name: HAKOMATIC B 1050 Drive: ELECTRIC Condition: see photos / TOP condition Item No.: B 1050 Manufacturer: HAKO Year of manufacture: see photos - visually TOP Operating hour meter reads "172" 4 brushes Crjdpewfflvefx Ab Iea Electric-operated Battery, full power 36 V DC / 5.5 KW Weight: 1500 kg New price: approx. €39,900 Price quoted for pickup from the warehouse in 47441 Moers Various cleaners and scrubber-dryers in stock We offer them as shown. Inspection is expressly offered. General: We offer various items here, which we describe as best as possible and provide informative photos. No further information about the item can be provided. We offer viewings on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by appointment. We offer viewings by telephone on Tuesdays and Thursdays between 9 a.m. and 4 p.m. The item can be picked up immediately if necessary. Due to time constraints, we can only offer answers to this question if you provide us with a telephone number with your inquiry. Unless expressly stated, this item is USED. We offer it as shown. All items are ex warehouse, 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. (Shipping costs are approximately €350 net, depending on distance.) All dimensions are approximate.

Condition: ready for operation (used), H & B / S & F AVL 220 Electrical transmitter, measuring range 0-250 mbar, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Crjdji Eac Nepfx Ab Iea

Condition: reconditioned (used), Connected load 380V 13A 5.5kW main drive motor + 0.7kW feed motor, planing width 630 mm, Tersa cutterblock with 4 knives, stepless feed 6-18 m/min, star-delta switch, mechanical table height adjustment via hand lever, drive via cutterblock, fine adjustment by handwheel, mechanical digital display for planing height, 1x table roller, extraction connection 160 mm, 1x steel infeed roller, 1x steel outfeed roller. Cedpfx Ajxdl U Ejb Iora

Condition: used, Year of manufacture 2003 2.2 kW Crjdow Upn Espfx Ab Ija 3.0 HP including documentation, COC

Condition: new, Year of construction: 2026, Working width 4500 mm Working height 3000 mm Number of cylinders 6 St. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg S&S frame press Bavaria 2000 L, built 2026 ----- SHORT TIMED availabe exw warehouse Engelfried, 73447 Oberkochen NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beams for the press corners in a low-abrasion machined version. Fast, smooth, manual width adjustment using ball-bearing carriage, fixing in 50 mm hole grid, optional motorized width adjustment with hydraulic clamping (at an additional cost). Height adjustment and pressing using long-stroke cylinders in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders is necessary, which avoids cylinder collisions. Lower support can be adjusted in several positions to the most suitable insertion height. 3 KW compact hydraulic system with integrated control block, variable pressure control from 20 - 120 bar, pressure gauge Control via touch button with separate control circuits for the vertical and horizontal press cylinders, mounted on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke adapted to working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint: RAL 7035 light gray with RAL 7016 anthracite gray Working size: length x height = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (length x height) Space required: 5,500 mm x 1,400 mm x 3,550 mm (LengthxWidthxHeight) Article medium pressure bar complete with pressure cylinder, pressure hose and shut-off valve up to 2,750 mm high Note: actual working height: 3,000 mm Article Individual pressure control for medium pressure bar, pressure control range up to max. 100 bar (For pressing cross-bar windows) Crjdpoyyqnfjfx Ab Isa Article infinitely height-adjustable cross pressure device, complete with pressure cylinder and abutment, throttle and shut-off valve Article Individual pressure control for cross pressure device pressure control range up to max. 100 bar (For pressing cross-bar window) Article Shut-off valve on the 3rd vertical cylinder Article Shut-off valve on the upper horizontal cylinder Article Shut-off valve on the lower horizontal cylinder ...

Condition: excellent (used), I am offering a vacuum pump from the renowned brand BUSCH, model SV 1016 B. The device is fully functional – tested and ready for operation. Technical data: • Model: SV 1016 B • Manufacturer: BUSCH • Country of production: Switzerland • Ultimate pressure: 150 mbar • Serial number: NH00770105 • Type: vacuum pump for air and gases Applications: • vacuum installations • vacuum packaging • industry • production machinery Cedeyxgmzspfx Ab Iora Condition: The item was used, shows normal signs of use, and is in good technical condition. Fully operational. Included in the set: • BUSCH SV 1016 B pump • connection as visible in the photos

Condition: excellent (used), I am offering a vacuum pump from the reputable brand BUSCH, model SV 1025 B. The device is fully functional – tested and ready for operation. Csdpfxjyxgc Ae Ab Isra Technical data: • Model: SV 1025 B • Manufacturer: BUSCH • Country of manufacture: Switzerland • Ultimate pressure: 120 mbar • Type: vacuum pump for air and gases Applications: • vacuum installations • vacuum packaging • industry • production machinery Condition: The item is used, shows normal signs of use, and is in good technical condition. Fully operational. Included in the set: • BUSCH SV 1025 B pump • visible installation/connection

Condition: good (used), Built-in control unit, control cassette, controller, bus controller, bus module -Manufacturer: B&R, Control unit controller -Type: X20 BC 0043 C01 Crsdpfxoyxc Ibj Ab Ioa -Power feed module: X20 PS 9400 -Number: 1 module available -Dimensions: 105/40/80 mm -Weight: 0.1 kg

Year of construction: 2010, condition: good (used), Our Asys buffer system is for sale. Type: FPS 30 B Crjdpfxsyylqzs Ab Iea Year of manufacture: 2008 Condition: good Available immediately

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 3,332 h, load capacity: 3,000 kg, lifting height: 6,550 mm, free lift: 1,940 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 2,780 mm, motor manufacturer: KUBOTA V1505-T, gearing type: hydrostat, fork carriage width: 1,400 mm, fork length: 1,200 mm, fork width: 125 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16x7x10 1/2, rear tire type: cushion tires (black), rear tire size: 22x10x16, overall weight: 9,555 kg, empty load weight: 6,555 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: red, Equipment: CE marking, all wheel drive, cabin, fork extension, lighting, pallet forks, retractable fork, sideshift, COMBILIFT CB3000 – 2018 | 3332 MTH | DIESEL | TRIPLEX 6550 mm Ready to work from day one – no investment, no risk Crodpfeyxy Ifsx Ab Iea --- ### Why this machine? Are you looking for equipment that keeps your production running smoothly? ⚙️ This COMBILIFT CB3000 is a proven model, fully serviced and ready for immediate operation – with no hidden costs. ✔ Major service completed (oils, filters, full inspection) ✔ Technical & cosmetic condition: like new ✔ Only 3332 MTH – low hours ✔ New tyres – no additional investment required --- ### Main Specifications ✔ Capacity: 3000 kg ✔ Diesel engine ✔ Triplex mast – 6550 mm lift height ✔ Fork positioner: 1400 mm ✔ Fork length: 1200 mm ✔ Fully heated cab --- ### Technical Details ✔ Year of manufacture: 2018 ✔ Own weight: 6555 kg ✔ Load centre: 600 mm ✔ Maximum lift height: 6550 mm ✔ Free lift: 1940 mm ✔ Dimensions: * Length: 1550 mm * Width: 1500 mm * Height: 2250 mm ✔ Tyres: Super-elastic (new) ✔ Equipment: cab, side shift, fork positioner ✔ Condition: * Technical: 5/5 * Cosmetic: like new, no corrosion --- ### Ideal Applications ✔ Narrow aisle warehouses ✔ Timber, steel & pipe industries ✔ Handling of long loads ✔ Indoor & outdoor operations --- ### Your Benefits Not just a used forklift – a ready-to-work solution: ✔ Fully tested before sale ✔ Ready for immediate deployment ✔ Online demonstration available ✔ Delivery/transport available --- ### Why FT LOGISTICS? We supply equipment that works – not that sits in the workshop. 🚀 ✔ 100+ machines available ✔ In-house service & preparation ✔ Extensive experience across Europe ✔ Hundreds of satisfied customers

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 3,332 h, load capacity: 3,000 kg, lifting height: 6,550 mm, free lift: 1,940 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 2,780 mm, motor manufacturer: KUBOTA V1505-T, gearing type: hydrostat, fork carriage width: 1,400 mm, fork length: 1,200 mm, fork width: 125 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16x7x10 1/2, rear tire type: cushion tires (black), rear tire size: 22x10x16, overall weight: 9,555 kg, empty load weight: 6,555 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: red, Equipment: CE marking, all wheel drive, cabin, fork extension, lighting, pallet forks, retractable fork, sideshift, COMBILIFT CB3000 – 2018 | 3332 HOURS | DIESEL | TRIPLEX 6550 mm Ready to work from day one – no investment, no risk --- ### Why choose this forklift? Are you searching for a machine that won't halt your production? ⚙️ This COMBILIFT CB3000 has been fully serviced and is immediately operational, with no hidden costs. ✔ Major service completed (oils, filters, thorough inspection) ✔ Technical & visual condition: like new ✔ Only 3332 hours – low operating time ✔ New tires – no additional investment needed --- ### Key Specifications ✔ Load capacity: 3000 kg ✔ Diesel engine ✔ Triplex mast – 6550 mm lift height ✔ Fork positioner: 1400 mm ✔ Forks: 1200 mm ✔ Fully enclosed, heated cabin --- ### Technical Details ✔ Year: 2018 ✔ Weight: 6555 kg ✔ Load center: 600 mm ✔ Max lifting height: 6550 mm ✔ Free lift: 1940 mm ✔ Dimensions: * Length: 1550 mm * Width: 1500 mm * Height: 2250 mm ✔ Tires: Super elastic (new) ✔ Equipment: Cabin, side shift, fork positioner ✔ Condition: * Technical: 5/5 * Visual: like new, no corrosion Crjdpfjyxy H Usx Ab Isa --- ### Ideal applications ✔ Narrow aisle warehouses ✔ Timber, steel, and pipe industries ✔ Long material handling ✔ Indoor and outdoor operation --- ### What you get Not just a used forklift, but a turnkey solution: ✔ Fully tested before sale ✔ Ready for immediate use ✔ Online demonstration available ✔ Transport available --- ### Why FT LOGISTICS? We deliver machines that work – not ones that spend time in the workshop. 🚀 ✔ 100+ machines in stock ✔ In-house service and preparation ✔ Extensive experience across Europe ✔ Hundreds of satisfied customers

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 3,332 h, load capacity: 3,000 kg, lifting height: 6,550 mm, free lift: 1,940 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 2,780 mm, motor manufacturer: KUBOTA V1505-T, gearing type: hydrostat, fork carriage width: 1,400 mm, fork length: 1,200 mm, fork width: 125 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16x7x10 1/2, rear tire type: cushion tires (black), rear tire size: 22x10x16, overall weight: 9,555 kg, empty load weight: 6,555 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: red, Equipment: CE marking, all wheel drive, cabin, fork extension, lighting, pallet forks, retractable fork, sideshift, COMBILIFT CB3000 – 2018 | 3332 MTH | DIESEL | TRIPLEX 6550 mm Ready to work from day one – no investment, no risk --- ### Why choose this forklift? Are you searching for a machine that won't halt your operations? ⚙️ This COMBILIFT CB3000 is a fully serviced and proven unit – ready for immediate deployment with no hidden costs. ✔ Major service completed (oils, filters, full inspection) ✔ Technical & visual condition: like new ✔ Only 3332 MTH – low operating hours ✔ New tyres – no additional expenditure --- ### Main Specifications ✔ Capacity: 3,000 kg ✔ Diesel-powered ✔ Triplex mast – 6,550 mm lift height ✔ Hydraulic fork positioner: 1,400 mm ✔ Fork length: 1,200 mm ✔ Full heated cabin Crjdpfx Abjyxy H Ij Ioa --- ### Technical Details ✔ Year: 2018 ✔ Weight: 6,555 kg ✔ Load centre: 600 mm ✔ Lifting height: 6,550 mm ✔ Free lift: 1,940 mm ✔ Dimensions: * Length: 1,550 mm * Width: 1,500 mm * Height: 2,250 mm ✔ Tyres: Super-elastic (new) ✔ Equipment: Cab, side shift, fork positioner ✔ Condition: * Technical: 5/5 * Visual: as new, no corrosion --- ### Ideal Applications ✔ Narrow aisle warehouses ✔ Timber, steel, and pipe industries ✔ Long load handling ✔ Indoor & outdoor use --- ### What you get Not just a used forklift – but a turnkey solution: ✔ Fully tested prior to sale ✔ Ready for immediate operation ✔ Online demonstration available ✔ Delivery can be arranged --- ### Why FT LOGISTICS? We deliver machines that perform – not stay in the workshop. 🚀 ✔ 100+ machines in stock ✔ In-house servicing and preparation ✔ Extensive experience across Europe ✔ Hundreds of satisfied customers

Condition: used, machine/vehicle number: 12400, functionality: fully functional, power: 24 kW (32.63 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 25 mm, spindle mount: MK 4, drilling depth: 120 mm, height adjustment type: mechanical, actuation type: manual, rotational speed (max.): 1,000 rpm, rotational speed (min.): 63 rpm, total width: 590 mm, total length: 700 mm, total height: 2,050 mm, throat depth: 315 mm, table width: 590 mm, table length: 700 mm, overall weight: 1,000 kg, VEB BK 25 AI Column Drilling Machine – Robust Industrial Version For sale is a stable and durable column drilling machine, model BK 25 AI, manufactured by VEB Werkzeugmaschinenfabrik Saalfeld (GDR). This machine features a heavy-duty cast iron design, making it ideal for use in workshops, mechanical engineering, maintenance, or training facilities. The machine provides a drilling capacity of up to 25 mm in steel and is equipped with an MK4 spindle taper. It offers a total of 12 mechanical speed settings, ensuring high torque and optimal adjustment for various materials. The quill stroke is 120 mm, with a throat depth of 315 mm. The generous worktable (700 × 590 mm) with T-slots offers versatile clamping options. Both drill head and table are adjustable, allowing for flexible operation. Power is supplied by a 2.4 kW motor (380 V, 3-phase, 50 Hz). The spindle speeds range from 63 to 1000 rpm. Technical Highlights: • Drilling capacity in steel: 25 mm • Spindle taper: MK4 • Speed range: 63 – 1000 rpm • 12 mechanical speed settings • Quill stroke: 120 mm • Throat depth: 315 mm • Table size: 700 × 590 mm • Total weight: approx. 1000 kg • Connection: 380 V / 3-phase Equipment: • Height-adjustable worktable • Mechanical speed selection • Solid cast iron construction • Industrial-grade design • Made in Germany (GDR) Cjdpfxoyw Rpwj Ab Iera The machine is in good used condition and ready for immediate operation. Inspection under power is possible.

Condition: new, For sale: EMG-DREHMO DR 39 B-40 electric valve actuator. The device comes from warehouse stock – condition: new, unused. Actuator designed for automatic valve control in industrial installations (water, gas, process technology, power engineering). Technical data • Manufacturer: EMG-DREHMO • Model: DR 39 B-40 Crjdpfx Aboyutpge Ija • Year of manufacture: 2005 • Torque: 40 Nm • Power supply: 380–420 V / 50 Hz • Motor power: 0.40 kW • Speed: approx. 30–40 rpm • Protection class: IP67 Condition Device is brand new – warehouse condition. Visible transport marks: slightly bent handwheel, small crack in housing by the gearbox (visible in photos). Not tested under voltage – sold as warehouse device / to be checked before installation. Scope of delivery • EMG-DREHMO valve actuator • Handwheel for manual operation Visual condition as per photos.