Used Haas Vf 6 for sale (215)

Condition: used, Haas TM2 CNC Toolroom Milling Machine, Table Size 270x1460mm, CAT 40 Tooling with 10 pcs of tooling, Machine Vice and collets, Travels, X-1016mm, Y-406, Z-406mm, Year 2007, Serial No 1061737 Specifications: X: 40" Y: 16" Hsdpfjx Rcbrex Am Aefh Z: 16" Power: 7.5 hp RPM: 4,000 RPM # ATC: 10 Taper: CAT-40 Table-W: 10.5" Table-L: 57.75"

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 7,500 rpm, Equipment: chip conveyor, Longitudinal travel X: 508 mm Cross travel Y: 400 mm Vertical travel Z: 508 mm Hfjdpfx Ajxq D Ecsm Ash CNC type: Haas Table length: 600 mm Table width: 355 mm Max. table load: 1350 kg Tool magazine: 20 positions Spindle taper: ISO 40 Max. spindle speed: 7500 rpm Spindle motor power: 8.3 kW Dimensions (L x W x H): 2200.0 × 2000.0 × 2300.0 mm Weight: 3190 kg

Condition: excellent (used), Year of construction: 2013, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 305mm, 533mm maximum cutting length, 50mm Bar capacity, 8” chuck, 20Hp Spindle Motor, C axis 0.01 degrees, Y axis +/- 51mm, 4000rpm spindle speed, 6,000rpm milling speed, 12 Station turret, Hedpfx Amey Ex T Tj Aofh parts catcher, tailstock, tool setter, coolant

Condition: used, Year of construction: 2007, functionality: fully functional, HAAS Steuerung mit LCD Bildschirm Maximum turning length (Z-axis): 610 mm Maximum turning diameter over bed: 262 mm Number of CNC axes: 2 Spindle power: 14,7 kW Vector Drive Spindle bore diameter: 51 mm Max spindle speed: 4000 rpm Number of turrets: 1 Number of tools in turret: 10 Hfsdpfx Asy Du R Eom Aeh Spindle face A2-6 Weight approx. 4800 kgs Dimensions (L x W x H): 2600 x 1700 x 1800 mm Accessories: - Chipping snatches - Coolant system - Tailstock - Tool measuring arm - Hydraulic 3-jaw chuck - Foot pedals - Signal light The machine is being sold due to company closure. It is no longer powered.

Condition: used, Year of construction: 2018, An immaculate ex University research facility machine that is hardly been used. Photographed as it it arrived and not yet cleaned! 2018 built HAAS Mini Mill... Machine Control: Haas CNC Table Size: 36" x 12" Hodpfx Amowzyd Es Aofh Machine Travels (X/Y/Z) : 16" x 12" x 10" (406 x 305 x 254 mm) Spindle To Table Distance : 4" - 14" (100 - 346mm) Table Capacity : 500 Lbs.(1200 Kgs) Spindle Speeds : 6,000 Max RPM Rapid Traverse Rate (X/Y/Z) : 600 IPM (15M/Min) Maximum Cutting Feed Rate : 500 IPM (13 M/Min) Tool Changer Style : Carousel Tool Changer Capacity : 10 Stations Tool Change Time : 4.2 Seconds Max Tool weight : 12 Lbs. Spindle Drive : 7.5 HP Equipped with: 40 Spindle Taper, 10 Station Automatic Tool Changer, Coolant system, Rigid Tapping, Tooling & Manuals Control: HAAS Spec: Travel X406 Y305 Z254 mm | 8000RPM | BT40 Accessories: 40 Spindle Taper, 10 Station Automatic Tool Changer, Coolant system, Rigid Tapping, Tooling & Manuals

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, We are offering this used HAAS GR-510 gantry milling machine, year of manufacture 2015. Machine Options: Tool Changers: - 20-pocket carousel tool changer 4th / 5th Axis: - 4th-axis drive and wiring Probing: - Wireless intuitive probing system Chip & Coolant Management: - Chip and coolant guard - Gantry router coolant system - Programmable coolant nozzle The Haas Control: - Early power-failure detection module - Rigid tapping Product Options: - 6" extended Z-axis clearance - Steel table, metric Legacy Options: Hfjdoyxx Azopfx Am Ash - CT-style tool changer grippers - 10,000 rpm spindle, 15 hp - Remote jog handle, color LCD

Year of construction: 2007, condition: ready for operation (used), Turning diameter: 430mm, max. swing diameter over bed: 760mm, max. turning length: 860mm, center distance: 990mm, travel X/Y: 280mm/860mm, speed: 3400rpm, chuck diameter: 12inch, tool stations: 12. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/1900mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Hedoy Hvp Iopfx Am Ajfh

Condition: ready for operation (used), Year of construction: 2003, spindle speed (max.): 3,200 rpm, travel distance X-axis: 318 mm, travel distance Z-axis: 660 mm, spindle motor power: 224,000 W, total height: 1,900 mm, overall weight: 7,200 kg, product length (max.): 3,800 mm, number of axes: 2, This HAAS SL-30 was manufactured in 2003. A robust horizontal turning machine featuring X/Z travel of 318/660 mm, turning diameter of 533 mm, and length of 660 mm. It includes a bar capacity of 76 mm, spindle power of 22.4 kW, and a maximum spindle speed of 3,200 rpm. Equipped with a 12-position tool turret and a semi-automatic hydraulic tailstock. Consider the opportunity to buy this HAAS SL-30 horizontal turning machine. Contact us for more information. • Turning diameter: 533 mm • Turning length: 660 mm • Spindle nose: A2-6 • Bar capacity: 76 mm • Spindle bore diameter: 254 mm • Max cutting speed: 10.2 m/min • Rapid feed rate: 24 m/min • Tool presetter: Yes • Tailstock: Semi-automatic hydraulic • Tool turret: 12 positions, VDI 40 Additional equipment • Chip conveyor: Screw type • Bar feeder: LNS Quik Load Servo III Dimensions Hfodpfx Amex D Irgo Aoh Machine Depth 1800 mm

Condition: ready for operation (used), Year of construction: 2018, table load: 227 kg, number of axes: 5, This 5-axis HAAS TR-310 was manufactured in 2018. It features a table diameter of 310 mm, a maximum part swing of 787 mm, and can handle loads up to 227 kg. With a maximum rotation speed of 50°/sec and travel range of ±120°, it's ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the HAAS TR-310 machine we have for sale. Contact us for more information about this machine. • Condition: Brand new, never used • Table diameter: 310 mm • Max part swing: 787 mm • Standard T-slots: 6 @ 60° • Max rotation speed: 50°/secB Axis (Tilting) • Backlash: 30 arc-sec • Ratio: 3:1 • Max speed: 50°/sec • Max runout: 0.025 mm • Travel range: ±120° • Resolution: 0.001°A Axis (Rotary) • Accuracy: ±15 arc-sec Hfodpsx D I H Refx Am Ash • Repeatability: 10 arc-sec • Max rotation: 999.999° (with rotary control) • Resolution: 0.001°

Condition: excellent (used), Year of construction: 2016, With B + C axis Working travels 762 x 508 x 508 mm Table diameter 500 mm Spindle taper 40 Spindle speeds -12'000 rpm Tool changer 40 Pos. Hjdslhqydjpfx Am Aefh Control HAAS Coolant through spindle Misc.accessories MARCELS MASCHINEN CH

Condition: used, X Axis 30.0 in 762 mm Hfjdpoiypzdsfx Am Ash Y Axis 16.0 in 406 mm Z Axis 16.0 in 406 mm Read for inspect Ready for delivery

Year of construction: 2006, condition: used, centre height 175 mm Hedpfxsmd Dido Am Asfh centre distance 300 mm number of spindle speeds 2.000 - 8.000 control SIEMENS 840D machine weight ab. 7.500 kg surface area 1.000 x 270 mm number of T-slots 3 groove width 12 H7 mm flute distance 50 mm spindle diameter in front bearing 55 mm Tool and Cutter Grinder | HAAS - MULTIGRIND AF1 Additional equipment: - Tool laser measuring system: Blum - Lasersystem MINI-MICRP-NANO The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: AF 1 | AF-1

Condition: refurbished (used), Year of construction: 2005, operating hours: 14,923 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 534 mm, feed length X-axis: 762 mm, feed length Y-axis: 305 mm, feed length Z-axis: 534 mm, torque: 45 Nm, controller manufacturer: Haas, total height: 2,700 mm, total length: 2,200 mm, total width: 1,750 mm, table width: 267 mm, table length: 1,213 mm, rotational speed (max.): 6,000 rpm, overall weight: 1,315 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, spindle nose: CT40/ISO/BT40, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Three-axis vertical CNC milling machine Haas TM-1HE, numerically controlled, with a 6000 rpm spindle. The machine is being sold by Haas service technicians with 10 years of experience. The machining center has undergone a complete, comprehensive inspection; it has been refurbished and is ready for operation. The mill is equipped with a range of additional options: - Higher-speed spindle up to 6000 rpm - Rigid tapping - Rotation & scaling - M19 spindle orientation - Macro programming - HSM (High Speed Machining) - IPS (Intuitive Programming System) - Possibility to activate 4th axis after adding servo amplifier and wiring; can be sold separately (fourth axis option) - Air coolant system Machine Information: - Machine type: Three-axis vertical milling machine Haas TM-1 - Serial number: 41246 - Manufacturing date: 04/05 - Spindle speed: 6000 rpm - X-axis travel: 762 mm Hfedpsyanlaofx Am Ajh - Y-axis travel: 305 mm - Z-axis travel: 534 mm - Minimum spindle-to-table distance: 102 mm - Maximum spindle-to-table distance: 636 mm - Table size: 1213 × 267 mm - T-slots: 3 slots, 16 mm wide - Overall dimensions (W × D × H): 220 × 175 × 270 cm - Weight: 1315 kg - Spindle motor power: 5.6 kW - Maximum torque: 45 Nm - Spindle taper: CT40 / ISO / BT40 - Voltage: 366/425 V - Phase: 3 - Full load current: 13 A - Frequency: 50/60 Hz - Largest load current: 16 A The machine has undergone a full, comprehensive inspection. All of the following components have been checked and verified: - Ballscrews - Linear guides and ways - Lubrication system - Spindle assembly - Spindle motor - Encoder - Vector drive - Servo amplifiers - I/O board - Processor board - All electrical cabinet components - Axis drives - Tool change system - CNC controller - Additional subsystems and components The machine is fully refurbished and ready for immediate operation.

Condition: used, Year of construction: 2008, turning diameter 432 mm turning length 864 mm control HAAS bar diameter 76 mm 3-jaw-chuck diameter 254 mm travel -z axis 864 mm travel -x axis 287 mm spindle speed: 3400 1/min spindle bore 88 mm swing over bed 762 mm swing diameter over bed slide 432 mm Hfedpfx Aeupmhwom Aeh turret head 12 Pos. VDI 40 drive capacity - spindle motor 22 kW voltage 400 V weight of the machine ca. 7.250 t dimensions of the machine ca. 3,90 x 2,00 x 1,90 m - serial-no.: 3082298 - Machine Run Time: ---- h - control: HAAS - tool measuring arm - chip conveyor - collant equipment

Condition: excellent (used), Year of construction: 2013, Haas-Mondomix -Buhler , A-15, 2013, continuous aerator for mixing and whipping, marshmallow & nougat, choco pie, chocolate and creams for sugar confectionary and bakery with Touch screen control, Hfjdpfxsf Azwzo Am Aeh with product pump In good condition. with mondotherm

Condition: good (used), Parts on table not come. Marked with red. Hfjdpfx Amewxdyxo Ash

Condition: good (used), Year of construction: 1999, Machine is in good condition. X 750 mm Y 400 mm Hfjdpfx Amswx Rafo Ajh Z 500 mm 10.000 rpm

Condition: excellent (used), Year of construction: 2020, operating hours: 7,320 h, machine/vehicle number: 3119208, turning length: 406 mm, turning diameter: 305 mm, spindle motor power: 14,900 W, spindle speed (max.): 4,000 rpm, spindle bore: 64 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 406 mm, For sale: Used CNC lathe HAAS ST15 in very good technical condition. Operating hours: 7,320. Reason for sale: Standardization of machinery for compatibility with the rest of the machine park. Key features: • Automatic Door • Renishaw WIPS Probing System • Hybrid BOT/BMT Turret (Dual Mount Tooling) • Live Tooling (Driven Tools – milling option) • Sub-Spindle (6,000 RPM) • Parts Catcher (if installed) • Chip Conveyor • Control Cabinet Cooler • Wireless Networking (WiFi) • Rigid Tapping • Extended Program Memory (1GB) • VPS Programming (Visual Programming System) Hfodpfx Amey A I Nxj Ajh For more information, please contact us by phone or email.

Condition: excellent (used), Year of construction: 2019, operating hours: 2,739 h, machine/vehicle number: 3113763, turning length: 406 mm, turning diameter: 305 mm, spindle motor power: 14,900 W, spindle speed (min.): 4,000 rpm, spindle bore: 64 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 406 mm, mount diameter: 210 mm, For sale: Used HAAS ST15 CNC lathe in very good technical condition. Operating hours only 2,739. Reason for sale: standardization of machines for compatibility with the rest of the facility. Key options: - Renishaw WIPS Probing System → Renishaw measuring probe (WIPS) - 8” Hydraulic Chuck Hfsdpsy A Iw Nofx Am Ash - 12-Station BOT Turret - Parts Catcher - Chip Conveyor - Rigid Tapping - Extended Program Memory (1GB) - VPS Programming (Visual Programming System) - Custom Macros (trial active) For more information, please contact us by phone or email.

Condition: excellent (used), Year of construction: 2021, Traverses X Y Z: 508 x 406 x 356mm, Table 1016 x 353mm, Spindle taper BT40, 20Hp spindle motor, Spindle Speed 10000rpm, HAAS Control, Hsdpeyw R Hpefx Am Aofh 20 Station ATC, coolant.

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 3,400 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 826 mm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS ST-30Y horizontal turning machine was manufactured in 2022. It features a 10-inch chuck, a maximum cutting diameter of 13.75 inches, and a cutting length of 32.5 inches. The machine includes a 12-station BMT-65 turret and live tooling speeds up to 4,000 rpm. Y-axis capabilities allow for off-center milling, drilling, and tapping. Consider the opportunity to buy this HAAS ST-30Y horizontal turning machine. Contact us for more information. • Chuck size: 10 in (≈254 mm) • Maximum bar capacity (through spindle): 3 in (≈76 mm) • Maximum part swing over front apron: 31.75 in (≈806 mm) • Maximum cutting diameter: 13.75 in (≈349 mm) using BMT65 turret • Maximum cutting length: 32.5 in (≈826 mm) Hodeyw N Dtjpfx Am Aofh • Rapid traverse: X 472 in/min (~12 m/min), Y 472 in/min (~12 m/min), Z 945 in/min (~24 m/min) • Spindle bore: 3.5 in (≈88.9 mm) • Maximum torque: 300 ft-lb @ 500 rpm (≈407 Nm) • Turret: 12-station BMT65 • Live tooling speed: up to 4,000 rpm • Y-axis capability: off-centre milling, drilling, and tapping • Coolant capacity: 55 gal (~208 L) • Air requirement: 4 scfm @ 100 psi (~113 L/min @ 6.9 bar) • Electrical: 3-phase, 195–260 V (region dependent) • Footprint: 151 in × 70 in × 79 in (without conveyor) Additional equipment • Powered (live) tool holders • Various tool holders • Liners

Condition: good (used), Year of construction: 2011, Swing 806mm, maximum cutting diameter 533mm, 762mm between centres, 660mm maximum cutting length, 76mm Bar capacity, Hfodpfx Amsywuvhj Ash 254mm 3 jaw chuck, 22.4kW Spindle Motor, 3400rpm spindle, 12 Station turret, tailstock, coolant, tool setter.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 863 mm, turning diameter: 432 mm, rotational speed (max.): 3,400 rpm, swing diameter over bed slide: 762 mm, controller model: Haas CNC Control, TECHNICAL DETAILS Turning diameter: 432 mm Turning length: 863 mm Spindle speed: 3,400 rpm Spindle bore: 88 mm Tool turret: 12 stations Tool holder: VDI 40 Swing diameter over bed: 762 mm Swing diameter over cross slide: 432 mm Three-jaw chuck diameter: 254 mm Tailstock quill ISO: 290 Bar capacity: 76 mm Travel Z-axis: 864 mm Travel X-axis: 287 mm MACHINE DETAILS Control: Haas CNC Control Spindle motor power: 22 kW Dimensions & Weight Required space: 3.9 x 2.0 x 1.9 m Hfjdeywhfvopfx Am Ajh Machine weight: 7.25 t EQUIPMENT Technical documentation

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We offer you: Manufacturer: Haas Model: ST-30Y Year of manufacture: 2019 Control: Haas Technical Data: Max. swing diameter: 533 mm Max. machining diameter (with BMT 65): 349 mm Distance between centers: 826 mm Bar capacity: max. 76 mm Travel distances: X-axis travel: 239 mm Y-axis travel: +/- 51 mm Z-axis travel: 826 mm Main spindle: Spindle speed: 3,400 rpm Drive power: 22.4 kW Turret: Number of tool stations: 12 positions Tool holder: BMT 65 Rapid traverse rates: Rapid traverse (x, y, z): 12 / 12 / 24 m/min Technical features & accessories: - Driven tools (C-axis) - Automatic tool presetting arm - Coolant tank - Coolant pump - Chip conveyor - 254 mm chuck Hjdpfxeyzz Uro Am Ajfh - Tailstock Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to alterations and errors in technical details and information, as well as prior sale!

Year of construction: 1995, condition: excellent (used), Very well maintained pre-cutting circular saw for side goods. With hydraulic power unit and accumulator, double clamping hydr. Attachment kit with measuring roller for riving knife. Electric control cabinet with control. Hedpfsh Eyqvex Am Asfh Control panel with digital dimension input and operation. Photos show original condition.