Used Graule Zs 200 for sale (18)

Condition: new, Year of construction: 2024, Product detail Crosscut and mitre circular saws Type ZS 200NF Crosscut and mitre circular saw with maximum cutting height of 200mm solid cast iron construction precise ball-bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 65° horizontal and 60° vertical readjustable fixed stops lower saw blade protection connectable to suction unit machine mounted on mobile machine base with 1,5 mtr. long roller conveyors left and right side Kedpfxecnz Rve Afiodu left side with scale and stop slide technical data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm ( not included in standard ) Suction nozzle 100 mm Weight 490 kg Location: Ex stock 54634 Bitburg - Immediately available - On request we can also offer you the saw blade.

Condition: new, Year of construction: 2024, cutting hight at 90°: 200 mm cutting width: 410 mm miter square horizontal: 45° - 90° - 25° miter square vertical: 60° - 90° -30° roller convoyer/ supporting table: no saw blade diameter: 520 mm speed: 2800U/min motor power: 5 kW Kjdpfxjiuld Se Afisdu motor brake: yes suction connection: 100mm machine length: machine width: Gewicht: 300kg

Condition: new, Year of construction: 2025, functionality: fully functional, Technical Data: Cutting height: 200 mm Cutting height at 45° incline: 140 mm Tiltable to the left up to 67° Kodpfx Afen R A Eweijdu Tiltable to the right up to 45° 5 kW hydraulic feed brake (optional) Cutting length: 420 mm at 90° position Cutting length at 45° swivel: 295 mm Tilt angle: left 60°, right 30° Tilt adjustment from the front via hand crank. 1 wood saw blade, diameter 520 mm 1 heavy-duty cross-cut roller conveyor, length 6,000 mm, mounted on the left. The stop is adjusted from the front via handwheel. Length is digitally readable to the millimeter. The stop is pneumatically locked. 1 digital readout (230 V version) 1 heavy-duty feed roller conveyor, right side, length 4,000 mm Machine length: 11,700 mm Fully mobile Machine packed on wooden planks Images show a customer’s machine. Available upon request also with 215 mm or 240 mm cutting height.

Condition: new, saw blade diameter 520 x Ø 50 mm cutting diameter 200 mm cutting length 420 mm Cutting height at 45° 140 mm dimensions of saw-blade 520x3,6/3,0x50 mm turning speeds 2800 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 310 kg. range L-W-H 1400 x 900 x 1650 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60°/45°), with fixed stops - Shift cut on both sides (60°/45°), with fixed stops - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Furnishing : - 3.0 kW motor for ALU cuttings - Saw blade can be tilted via handwheel and worm gear (shift cut) - Saw blade diameter 520 mm - Saw blade mounting hole 50 mm - Saw blade speed 2,800 rpm - 400 Volt / 3 kW (S6/40%) motor with brake and automatic. Star-delta motor circuit - Machine weight approx. 250 kg Cutting data : - Cutting length at 90° = 420 mm - Cutting height at 90° = 200 mm - Cutting length at 45° = 295 mm - Cutting height at 45° = 140 mm Special accessories included: - HM saw blade 520x3.6/3.0x50 mm - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above best. from : 2 vertical clamping cylinders Kdedpfxsxaaxdo Afiju adjustable with lever valve - pneumaschine saw blade spray device - Machine can be tilted from the front on both sides using a hand crank - Machine stand

Year of construction: 1996, condition: used, Max. saw blade diameter: 520 mm Cutting height: 200 mm at 90°, 140 mm at 45° Cutting length: 420 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30° Pneumatic material clamps Minimum quantity spray device Kjdpfx Aewyur Isfijdu Powerful 5 KW motor

Condition: new, Year of construction: 2022, New machine Year of manufacture 2022 Motor 400 V / 5.0 kW speed 2800 rpm cutting length 420 mm Kedpfskwhmfsx Afiedu Cutting width 420 mm at 90 295 mm at 45° Cutting height 200 mm at 90° 140 mm at 45 Saw can be tilted on one side up to approx. 25° to acute angles and tilted flat to the left up to 30°. Saw blade-Ø 520 mm x 50 mm suction nozzle-Ø 100 mm Weight 250kg With the following equipment options: - HM circular saw blade 520x4,0/2,8 x 50 60 WZ for wood - Machine can be tilted on both sides from the front via hand crank Availability: short term/2022 Location: Solingen

Condition: new, Year of construction: 2025, crosscut and miter saw type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Kdodpoi Dfidofx Afiou Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake u. Automat. Star delta motor control cutting width at 90deg: 420 mm cutting width at 45deg: swivelled: 295 mm Cutting height at 90deg: 200 mm Cutting height at 45deg tilted: 140 mm Saw can be tilted on one side up to approx. 25 degrees to acute angles and tilted flat to the left up to 30 degrees Machine stitched: approx. 250 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 2019/72/23, saw blade diameter: 520 mm, cutting height (max.): 200 mm, rotational speed (max.): 2,800 rpm, rotational speed (min.): 2,800 rpm, cutting length (max.): 500 mm, type of input current: three-phase, saw blade bore: 50 mm, space requirement length: 8,800 mm, space requirement width: 1,200 mm, length stop: 8,800 mm, input current: 16 A, I'm selling my Graule ZS 200N and Beck ESF 2 due to discontinuation. Kdsdpfx Afswauafjisu Mobile saw base Beck ESF 2 with Graule ZS 200N Mobile saw base; total length approx. 8600 mm for G-ZS 170 and 200 saws The base is mobile with 4 swivel casters (200 mm diameter), 2 of which have brakes The extensions on the feed and stop roller conveyors are equipped with retractable support feet; the saw base is powder-coated gray-white RAL 9002; With drawing holder; with 5 crank supports, ensuring stability during work. With electrical power distribution and 3-way 230 V socket Exact A on the left side, track length 5,200 mm, measuring length from 400 – 5,960 mm with digital LED measurement display. The stop is pneumatically fixed – otherwise as per ESF 1 – measuring length including extension approx. 8,800 mm

Condition: new, Year of construction: 2025, machine/vehicle number: diverse, The professional for cutting to length, miter and bevel cuts The ZS 200 N is ideally suited for cutting to length, mitre and bevel cuts. Materials such as wood, PVC and aluminum profiles can be cut cleanly and precisely. The saw unit runs on a hardened guide arm and can be tilted horizontally on both sides for miter cuts. The N stands for tilt and means that the saw unit can also be tilted vertically to the side, making it easy to carry out rip cuts. Fact check ZS 200 N Crosscut and mitre circular saw with a maximum cutting height of 200 mm Sturdy cast iron construction precise ball bushing guide of the tool carriage on hardened and ground steel shafts manual saw feed fast miter adjustment up to 65° horizontal and up to 60° vertical Kjdpfx Ajh Nu Iujfiodu Adjustable fixed stops Lower saw blade guard Can be connected to extraction system Machine can be tilted on both sides from the front Hydraulic feed brake Technical details: Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°-90°-25° Vertical mitre range 60°-90°-30° Saw blade Ø 520 mm Weight 310 kg Scope of delivery: ZS 200 N cross-cut and shifter saw Machine stand Machine can be tilted from the front on both sides Hydraulic feed brake HM Z 60 neg. circular saw blade Operating tool and hand crank

Condition: new, 400 Volt Drehstrom-Bremsmotor 5,0 kWSägeblattdurchmesser 520 mm,Sägeblattaufnahme 50 mm,Schnitthöhe 200 mmSägeblatt auf 45° geneigt: Schnitthöhe 140 mm,Schnittlänge 420 mm,mit Maschinenständer und Handkurbel hintenzur Neigungseinstellung Ksdpfx Afovxr Theisdu

Condition: new, Year of construction: 2025, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Kdjdpfx Afjk H Ic Usiou Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Location: From stock 54634 Bitburg - immediately available - Picture: similar. Machine is still in original packaging

Condition: new, Year of construction: 2024, Mobile chop station with extremely robust base, ready assembled and ready for use. Included special equipment: - Machine tiltable on both sides from the front - Circular saw blade HM 520x50 Z60 W neg. - Undercarriage mobile, especially stable Kdodpfxjb Nrg Uj Afisu Data of the machine: - especially due to constant zero point good when using measuring equipment and stop systems (miter and tilt!) - Powerful three-phase motor 5 kW with automatic Star-delta starting - stable guide arm with 4 ball bushings for precise and safe preference - swiveling left 45 ° (miter) - swiveling right 65 ° (miter) - Tilt left 60 °, right 30 ° - Cutting width at 90 ° 420 mm - Cutting width for miter 45 ° 295 mm - Cutting height vertical 200 mm - Cutting height at inclination 45 ° 140 mm - Cutting height at inclination 60 ° 80 mm - for saw blade 520x50 mm - Suction nozzle 100 mm - Weight with stand 300 kg - CE and GS signs. dust tested - German quality product Data base: Extremely stable frame construction from large dimensioned profiles, powder-coated, sturdy steel carrying rollers with ball bearing high wall thickness galv. galvanized, sustainable Double-stop swivel castors with PU tread, easy to move Roll width 450 mm Conditions about threaded spindles adjustable 1500 mm roller conveyor per side 2750 mm stop length per side Total length 5990 mm Stiff profile heavily ribbed 100x50 mm Anodised aluminum (extendable as option) 1 hinged stop right and left Measuring tape right and left

Condition: new, Year of construction: 2025, Crosscut and Mitre Circular Saws Type ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust grey cast iron construction Precise ball bushing guidance of the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Adjustable fixed stops Lower saw blade guard connectable to extraction system Kdodpfx Afsw Hl Aqjiou Machine mounted on mobile machine base with 1.5 m long roller conveyors on both sides (left and right) Left side equipped with scale and stop slider Technical Data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Location: In stock at 54634 Bitburg - Immediately available - On request, we are happy to offer the saw blade as well.

Condition: new, Year of construction: 2024, Depth of cut at 90°: 200 mm Kdjdpsiy Ry Ajfx Afiou Depth of cut at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Miter range horizontal: 45° -90° -25° Miter range vertically: 60° -90° -30° Sawblade diameter: 520 mm rpm: 2800 U/min Motor: 5 kW motor brake: yes suction plant diameter: 100 mm weight: 490 kg

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 520 mm, cutting height (max.): 200 mm, feed length X-axis: 420 mm, rotational speed (min.): 2,800 rpm, cutting length (max.): 420 mm, space requirement length: 8,800 mm, space requirement width: 1,200 mm, length stop: 8,800 mm, pressure: 5 bar, power: 5.5 kW (7.48 HP), workpiece height (max.): 200 mm, Equipment: double-sided, Mobile saw base frame; total length approx. 8600 mm for Graule ZS 200 saw; stop roller conveyor on the left side 5200 mm, measuring length from 400 - 5960 mm, with digital LED measurement display, measuring length including extension approx. 8800 mm, Saw base frame with 6 crank supports ensure safe standing when working. With electrical power distribution and 3-way socket 230 V Mobile saw base frame Beck ESF 1, saw ZS 200 mounted on base frame Kedjv Hhg Topfx Afiodu

Condition: new, Year of construction: 2024, machine/vehicle number: MR005970, Perfect cutting 200mm high! In double miter and with a fixed zero point. When the machine is mitered, the saw blade continues to enter the material at the same point. Technical specifications: - Fixed zero point: Yes - Miter angle: 45-90-25 ° - Tiltable: Yes Kdodpsvzl Scefx Afiou - Tilt angle: 60-90-30 ° - Maximum cutting length: 420 mm - Maximum cutting height: 200 mm - Maximum saw blade diameter: 520 mm - Weight: 310 kg - Saw blade speed: 2800 /min - Motor power: 7 hp - Serial number: 2024/95/5

Condition: new, Year of construction: 2025, functionality: fully functional, nominal power: 5 kW (6.80 HP), 5 kW 7.5 HP Cutting height 200 mm Tiltable up to 60° to the left, up to 30° to the right using a hand crank from the front Cutting height when tilted at 45°: 140 mm Cutting width 420 mm; cutting width when swiveled at 45°: 290 mm Swivable up to 60° to the left, up to 45° to the right Incl. saw blade for wood 6,000 mm heavy-duty crosscut roller conveyor, mounted on the left, stop-slider adjustable from the machine with handwheel, pneumatically lockable, length digitally readable, digital display in 230V version 4,000 mm heavy-duty infeed roller conveyor, mounted on the right Machine tiltable on both sides from the front using hand crank and worm gear Various options available on request, e.g. greater cutting height, material clamping, laser cutting guide Ksdpjdxw U Iefx Afijdu

Condition: new, A heavy duty German built radial arm crosscut saw with swivel and tilting capability and a large cutting capacity of up to 200mm deep. A unique feature on this model of machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Both optional vertical (tilting) and standard horizontal (swivel) angles can be adjusted manually with either graduated scales or with an optional digital display unit for reading the position. The saw is also available with an optional automatic NC positioning system with 4 memorised pre set positions. The machine is ideally suited for easy and accurate cutting of compound angles for furniture and joinery components. The machine can be specified to cut wood, aluminium, plastics or composite materials. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand Heavy duty 5 KW motor. Spring return of saw carriage. 1 x 520mm dia TCT x 4.4mm kerf x 50mm bore - 60 teeth WZ saw alternate bevel. Kdjdpfxedy Hm No Afisu 50mm spindle diameter. 22 - 90 - 45 horizontal movement. (Swivel) 30 - 90 - 60 vertical movement. (Tilt - optional N model) Adjustable upper protection. 520mm TCT sawblade Z60. Cutting Capacity: 420 wide x 200mm deep at 90 degrees. 295 wide x 200mm deep at 45 degrees. 420 wide x 140mm deep at 45 degrees. (Tilt- optional N model). Dust extraction outlet 100mm. Working height of table 900mm