Large Capacity Radial Arm Crosscut Saw

Graule ZS200

Condition: new, Year of construction: 2026, machine/vehicle number: diverse, The professional for cutting to length, miter and bevel cuts The ZS 200 N is ideally suited for cutting to length, mitre and bevel cuts. Materials such as wood, PVC and aluminum profiles can be cut cleanly and precisely. The saw unit runs on a hardened guide arm and can be tilted horizontally on both sides for miter cuts. The N stands for tilt and means that the saw unit can also be tilted vertically to the side, making it easy to carry out rip cuts. Fact check ZS 200 N Crosscut and mitre circular saw with a maximum cutting height of 200 mm Sturdy cast iron construction precise ball bushing guide of the tool carriage on hardened and ground steel shafts manual saw feed fast miter adjustment up to 65° horizontal and up to 60° vertical Adjustable fixed stops Lower saw blade guard Can be connected to extraction system Machine can be tilted on both sides from the front Hydraulic feed brake Technical details: Gbjdpfjh Nu Iuox Agbog Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°-90°-25° Vertical mitre range 60°-90°-30° Saw blade Ø 520 mm Weight 310 kg Scope of delivery: ZS 200 N cross-cut and shifter saw Machine stand Machine can be tilted from the front on both sides Hydraulic feed brake HM Z 60 neg. circular saw blade Operating tool and hand crank

Condition: used, IDC000100 Complete sawmill Gsdpjvgdy Aefx Agbsbg - Valon Kone VK26M with infeed and outfeed conveyors - merry go around system - ARIVislanda KS12 37 kW x 2 - ARI Slab saw - ARI KL10 split saw - Soderhamn Eriksson 519C, edger with chipper heads - Bruks Chipper 1300 Complete with control system and mechanization.

Condition: new, Year of construction: 2026, crosscut and miter saw type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake u. Automat. Star delta motor control cutting width at 90deg: 420 mm cutting width at 45deg: swivelled: 295 mm Cutting height at 90deg: 200 mm Godpfxei Dfids Agbjbg Cutting height at 45deg tilted: 140 mm Saw can be tilted on one side up to approx. 25 degrees to acute angles and tilted flat to the left up to 30 degrees Machine stitched: approx. 250 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, functionality: fully functional, nominal power: 5 kW (6.80 HP), 5 kW 7.5 HP Cutting height 200 mm Tiltable up to 60° to the left, up to 30° to the right using a hand crank from the front Cutting height when tilted at 45°: 140 mm Gbjdpfx Aodxw U Ijgbsg Cutting width 420 mm; cutting width when swiveled at 45°: 290 mm Swivable up to 60° to the left, up to 45° to the right Incl. saw blade for wood 6,000 mm heavy-duty crosscut roller conveyor, mounted on the left, stop-slider adjustable from the machine with handwheel, pneumatically lockable, length digitally readable, digital display in 230V version 4,000 mm heavy-duty infeed roller conveyor, mounted on the right Machine tiltable on both sides from the front using hand crank and worm gear Various options available on request, e.g. greater cutting height, material clamping, laser cutting guide

Condition: used, machine/vehicle number: 11481, Rotor diameter: 300 mm Rotor width: 600 mm Gsdpsghgmzjfx Agbsbg 3-blade rotor 4 rows of stator blades Inlet cross-section approx. 250 x 600 mm Drive motor 37 kW

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 520 mm, total length: 1,750 mm, total width: 1,030 mm, total height: 1,800 mm, type of input current: three-phase, input voltage: 400 V, saw blade bore: 50 mm, ❇️ Graule ZS 200 N – Crosscut and Mitre Saw | Very Good Condition | Fully Functional | UVV Safety Inspected For sale on behalf of a client is a high-quality Graule ZS 200 N crosscut and mitre saw from a window manufacturing facility. The machine is in very good, well-maintained, and fully functional condition and has been regularly used until recently. Current UVV/safety inspection available (see photos). Viewing and function testing on site can be arranged at any time. ⸻ ❇️ Technical Specifications: • Manufacturer: Graule Maschinenbau GmbH, Aalen • Model: ZS 200 N • Machine type: Crosscut & Mitre Saw (for aluminium, wood, plastic) • Saw blade diameter: 520 mm • Bore: 50 mm • Swivel range: large, finely scaled mitre range • Drive: 400 V Gedpfsx N Hxxox Agbobg • Application area: Primarily for processing aluminium and profiles • Design: Heavy-duty industrial standard construction ⸻ ❇️ Features & Highlights • Very robust machine stand • Large dual-sided worktable (multiplex coated) • Pneumatic hold-down clamps • Extraction hood / extraction port • Digital measuring/length stop system (display mounted on top) • Precise swivelling mechanism with angle scale • Ideal for aluminium profiles in window manufacturing • Ready for immediate operation • Only original Graule circular saw blades permitted (manufacturer’s note) ⸻ ❇️ Condition • Very good, well-maintained, immediately ready for use • Fully functional • Well-kept appearance • Still in use • UVV safety inspected ⸻ ❇️ Sale & Processing • Invoice with VAT shown is possible • Delivery or transport available upon request and cost coverage • Location: 72229 Rohrdorf • On-site loading by overhead crane possible ⸻ ❇️ Price: Net asking price: €8,990 + VAT ⸻ ❇️ Dimensions: • Approx. D 175 cm x W 103 cm x H 180 cm ⸻ ⚠️ Other accessories for the workshop and metalworking are also available in my other listings. ‼️ Please also take a look at my other items. It’s worth it!

Condition: used, Year of construction: 1996, Cutting height at 90°: 200 mm Cutting length: 410 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Extraction port: 100 mm Hold-down device: yes Machine length: Machine width: Gjdpexu Dhxofx Agbjbg Weight: 300 kg

Condition: used, Year of construction: 1992, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm Godpfofrvzvex Agbsbg capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: new, Year of construction: 2026, Mobile chop station with extremely robust base, ready assembled and ready for use. Included special equipment: - Machine tiltable on both sides from the front - Circular saw blade HM 520x50 Z60 W neg. - Undercarriage mobile, especially stable Data of the machine: - especially due to constant zero point good when using measuring equipment and stop systems (miter and tilt!) - Powerful three-phase motor 5 kW with automatic Star-delta starting - stable guide arm with 4 ball bushings for precise and safe preference - swiveling left 45 ° (miter) - swiveling right 65 ° (miter) - Tilt left 60 °, right 30 ° - Cutting width at 90 ° 420 mm - Cutting width for miter 45 ° 295 mm - Cutting height vertical 200 mm - Cutting height at inclination 45 ° 140 mm - Cutting height at inclination 60 ° 80 mm - for saw blade 520x50 mm - Suction nozzle 100 mm - Weight with stand 300 kg - CE and GS signs. dust tested - German quality product Data base: Extremely stable frame construction from large Gsdpfx Ageb Nrg Uobebg dimensioned profiles, powder-coated, sturdy steel carrying rollers with ball bearing high wall thickness galv. galvanized, sustainable Double-stop swivel castors with PU tread, easy to move Roll width 450 mm Conditions about threaded spindles adjustable 1500 mm roller conveyor per side 2750 mm stop length per side Total length 5990 mm Stiff profile heavily ribbed 100x50 mm Anodised aluminum (extendable as option) 1 hinged stop right and left Measuring tape right and left

Condition: new, Year of construction: 2026, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Godjk H Ic Uspfx Agbsbg Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Location: From stock 54634 Bitburg - immediately available - Picture: similar. Machine is still in original packaging

Condition: new, functionality: fully functional, The Brugger PX130 wood chipper is operated via the PTO shaft of a tractor and is capable of shredding logs with a diameter of up to 13 cm. The robust design and high-quality materials ensure reliable performance. With hydraulic feed, it is an efficient solution for wood processing in various agricultural and forestry applications. Gedpsrblwdefx Agbsbg - Hydraulic feed - Diameter up to 13cm - Weight 420kg - PTO speed: 540 rpm - Horsepower tractor: 30-70 hp

Condition: new, Year of construction: 2025, functionality: fully functional, Technical Data: Cutting height: 200 mm Cutting height at 45° incline: 140 mm Tiltable to the left up to 67° Tiltable to the right up to 45° 5 kW hydraulic feed brake (optional) Cutting length: 420 mm at 90° position Cutting length at 45° swivel: 295 mm Tilt angle: left 60°, right 30° Tilt adjustment from the front via hand crank. 1 wood saw blade, diameter 520 mm 1 heavy-duty cross-cut roller conveyor, length 6,000 mm, mounted on the left. The stop is adjusted from the front via handwheel. Length is digitally readable to the millimeter. The stop is pneumatically locked. 1 digital readout (230 V version) 1 heavy-duty feed roller conveyor, right side, length 4,000 mm Machine length: 11,700 mm Fully mobile Machine packed on wooden planks Images show a customer’s machine. Gjden R A Ewepfx Agbobg Available upon request also with 215 mm or 240 mm cutting height.

Condition: new, Year of construction: 2026, Crosscut and Mitre Circular Saws Type ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust grey cast iron construction Precise ball bushing guidance of the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Adjustable fixed stops Lower saw blade guard connectable to extraction system Machine mounted on mobile machine base with 1.5 m long roller conveyors on both sides (left and right) Left side equipped with scale and stop slider Technical Data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Gbjdpsw Hl Aqefx Agbjg Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Location: In stock at 54634 Bitburg - Immediately available - On request, we are happy to offer the saw blade as well.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-5, empty load weight: 734 kg, maximum load weight: 2,766 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,840 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, color: silver, Year of construction: 2025, brakes: other, New series! Rear tipper with standard electric tipping function and low loading height, braked tandem high-bed trailer with all-round foldable and removable aluminum drop sides, welded, hot-dip galvanized steel frame, wooden floor covered with steel plate, lashing points on the sides of the floor in a V-groove, automatic jockey wheel, 13-pin electrical system with reversing light, low chassis. Plus freight to Gera and vehicle registration document €250 net. Optional accessories available at extra charge: mesh sides, tarpaulin and frame, 100 km/h equipment, integrated loading ramps, support stands, etc. Delivery available at extra cost! Financing / leasing possible. Gsdpfxjghpc Ne Agbsbg Pictures are for illustration only, some shown with optional accessories at extra charge!

Condition: new, Year of construction: 2026, Product detail Crosscut and mitre circular saws Type ZS 200NF Gedpfx Agjcnz Rvobobg Crosscut and mitre circular saw with maximum cutting height of 200mm solid cast iron construction precise ball-bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 65° horizontal and 60° vertical readjustable fixed stops lower saw blade protection connectable to suction unit machine mounted on mobile machine base with 1,5 mtr. long roller conveyors left and right side left side with scale and stop slide technical data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm ( not included in standard ) Suction nozzle 100 mm Weight 490 kg Location: Ex stock 54634 Bitburg - Immediately available - On request we can also offer you the saw blade.