Used Grain Dryer for sale (2,494)

Condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet -Manufacturer: Küppersbusch, Electrode dryer type SET-4 -Nominal temperature: up to 300°C -Usable space: WDH 140/140/460 mm -Voltage: 220 V -Power: 0.9 kW Kwedpfx Aex Ir Trod Net -Contents: see photos -Dimensions: 385/365/H695 mm -Total weight: 19.3 kg

Condition: good (used), functionality: fully functional, R A Lamb E28.5 Section Dryer • Compact instrument that quickly dries racks of slides using a stream of warm air • Selectable air temperature from ambient to 70°C allows efficient drying of slides • Hinged lid allows warm air to escape via spaces on either side • The lid and chamber lining are made from polished stainless steel for easy cleaning • Controls are located on top to protect them from moisture when lid is open • Deep chamber holds large slide racks • Racks containing slides are placed on a grill in the glass-fronted chamber Technical Specification Dimensions, external [w x d x h], mm 285 x 245 x 129 Dimensions [w x d x h], mm 260 x 80 x 108 (chamber) Kwsdpfx Adou Tkcxs Net Mass, kg 4.1 Electrical supply 220V to 240V, 50/60Hz Good working condition. Please check out our other listings as well.

Condition: used, functionality: fully functional, Textile Tunnel Dryer. Kwedev U D Ucepfx Ad Not Good working condition. Please check out our other listings as well.

Condition: new, -User-friendly operating concept -Efficient design for cost-effective and safe operation -Cooling fan speed-controlled from 0-100%, thus eliminating the need for the usual pressure switch and thermostat for fan control -Fewer wearing parts while maintaining a constant pressure dew point -Control system displays five different alarm states and stores them in memory -Refrigeration compressor shuts off below 15°C ambient temperature if no compressed air is flowing through -Clear layout and easy accessibility of all maintenance components -With built-in automatic condensate drain The advantages at a glance -High cost-effectiveness -Excellent price-performance ratio -No unnecessary compressed air losses thanks to the integrated electronic condensate drain -Connected tools and machines are optimally protected -User-friendly operating concept Kwedju T Hrvjpfx Ad Njt Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria - Air flow rate l/min: 1200 l/min - Air flow rate m³/h: 72 m³/h - Maximum pressure: 16 bar - Air connection: 1/2" - Power consumption: 0.2 kW Dimensions and weights: - Length (product) approx.: 325 mm - Width/depth (product) approx.: 430 mm - Height (product) approx.: 445 mm - Net weight approx.: 24 kg

Condition: used, KAESER TAH 6 Refrigeration Dryer - used - ----- Technical Data ----- Maximum pressure: 16 bar, Kjdpfswziflex Ad Newt Power supply: 230 Volt

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, available immediately, 12-month warranty -Max. temperature 180°C -External dimensions WxDxH: 2520 x 1870 x 2300 mm -Usable chamber WxDxH: 1700 x 1350 x 1660 mm -Connection: 400V / 50Hz / 21kW -Weight: 1,100 kg -Documentation Kwsdoxfvfkspfx Ad Not Not a paint dryer according to DIN EN 1539! Inspection at our warehouse by appointment. Oven, ovens, drying oven, kiln, heat oven, warming cabinet, industrial oven, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, recirculating drying cabinet, recirculating oven,

Year of construction: 2012, condition: excellent (used), functionality: fully functional, 12 months warranty, demonstration unit, very good condition, only approx. 250 operating hours, available immediately - Oven according to DIN EN 1539 for solvent-based materials - Max. temperature: 300°C - Oven chamber: 750 x 750 x 750 mm (W x D x H) - External dimensions: 1510 x 1150 x 2200 mm (W x D x H) Kwjdpsiq Uv Nofx Ad Not - Temperature controller: JUMO dTRON 04 - Permissible solvent quantity max. 19.30 g - Heating capacity: max. 21.78 kW, connected load 22.5 kVA, nominal current 32.6 A - Connection: 400V 3L/PE 50Hz - Cable with 63A plug, also suitable for fixed installation, then fused at 35 or 50 A - incl. 1 wire shelf insert - Weight 550 kg - Documentation Inspection possible by appointment at our warehouse. Oven, ovens, industrial oven, circulating air oven, chamber air circulating oven, tempering oven, heat oven, drying oven, curing oven, paint dryer, solvent oven

Condition: excellent (used), Here we offer you a chamber dryer. Outer dimensions approx. width: 1.885 mm depth: 1.200 mm height: 2.425 mm Usable space dimensions approx. width: 1.030 mm depth: 1,000 mm Height: 2,100 mm Usable space: 2.2 m³ Nominal temperature: 100 °C Working temperature: 85 °C Heating medium: 3 x 400 V, 50 Hz Heating capacity: 20 kW Circulating air volume: 4,500 m³/h / 400 Pa Motor power: 1,1 kW Protection class: IP 54 The chamber heating furnace must not be used for flammable or explosive substances. The chamber heating furnace must not be installed in the Ex-area. Paternoster device External dimensions: Height: 1,880 mm Width: 809 mm Depth: 950 mm support sets: 13 pieces Pitch: 228 mm Carrying set width: 354 mm Carrying set depth: 320 mm useful height: 135 mm Power of drive motor: 0.25 kW at 189 Nm Transport speed: on average 5 m/min. Payload/carrier set: max. 10 kg total payload: max. 130 kg total weight loaded: max. 730 kg year of construction: 2005 Type: Ke/SO Condition: used / used Kwodpfx Adsgm Hwuj Nst Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Labotek Type: FMD-M-M-15-15-V Model 101134 The Labotek FMD-M-M-15-15-V model is part of the FMD-M series by Labotek, a leading manufacturer of material drying, dosing, and conveying systems for the plastics industry. The FMD-M series comprises modular dryers designed for processing plastic granules. Technical Specifications of the FMD-M Series Model designation: FMD-M 15/15 Dimensions: 80 x 120 x 120 cm Net weight: 88 kg Shipping weight: 113 kg Shipping dimensions: 80 x 120 x 120 cm Shipping volume: 1.15 m³ These dryers are specifically designed for processing plastic granules and are characterized by their modular construction, allowing flexible adaptation to a wide range of production requirements. Voltage: 3x400 Vac+PE Current: 10.4 Amp Overcurrent protection: 16 Amp Power: 2.6 kW Frequency: 50/60 Hz The Labotek AVR3G is an industrial vacuum conveyor with a 1-liter capacity, designed for the automatic conveying of free-flowing plastic granules. It is particularly suitable for small to medium-sized production facilities where space and weight are critical factors. Technical data for Labotek AVR3G (1 liter): Capacity: 1 liter Conveying capacity: Up to 15 kg/h Conveyed material: Free-flowing, granular raw material (minimum grain size 3 mm) Operating noise level: Below 69 dB Material contact surfaces: Stainless steel AISI 304 Maximum material temperature: 80°C Alarm function: Low material level Power supply: Compatible with 50/60 Hz Weight: 88 kg Condition: used Scope of delivery: (See image) Kwedpfowwh Evjx Ad Njt (Subject to change and errors in technical data. Details are provided without obligation!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), Vötsch Type: LTU 60/60 Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances of 40 % of the lower explosion limit (LEL) Highest temperature of the heating surface above 750 °C Device description: Technical data: Interior (usable space) 0.216 m3 Internal dimensions: Width 600 mm Height 600 mm Depth 600 mm Kedpoun Rr Refx Ad Njwt External dimensions: Total width 796 mm Height 1725 mm Depth 850 mm Loading / load capacity Total roller conveyor 55 kg Loading height above installation floor 820 mm Weight (net) kg 275 Minimum exhaust air volume flow 96 m3/h Purge time 5-fold air change 90 sec. Increased recirculation air volume flow 33 m3/h Total vapor space 0.414 m3 Sound pressure level (according to DIN 45635) < 70 dB(A) Switch-off temperature Temperature limiter (TB) fixed setting 300 °C Temperature selector limiter (TWB) adjustable above nominal temperature 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TB) 1 Temperature selector limiter (TWB) 2 Nominal temperature 200 °C Electrical data Rated voltage / frequency 400V, 3/(N)PE, AC 50/60 Hz Rated current 12.0 A Nominal power 6.0 kW Connected load 7.0 kW Weight: 275kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer you a Heraeus Vöstch dryer for coating materials. Maximum concentration of flammable substances of < 40 % of the lower explosion limit (LEL). Highest temperature of the heating surface above 750 °C Equipment description: Technical data: Interior (usable space) 0.216 m3 Inner dimensions: width 600 mm height 600 mm depth 600 mm External dimensions: Total width 796 mm Height 1725 mm Depth 850 mm Loading / load capacity Roller conveyor total 55 kg Loading height above installation floor 820 mm Kwjdpfohv Ru Sex Ad Not Weight (net) kg 275 Minimum exhaust air volume flow 96 m3/h Purge time 5-fold air change 90 sec. Recirculation air volume flow increased 33 m3/h Total steam space 0.414 m3 Sound pressure level (according to DIN 45635) < 70 dB(A) Switch-off temperature Temperature limiter (TB) fixed 300 °C Temperature selector limiter (TWB) adjustable above nominal temperature 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TB) 1 Over-temperature limit controller (TWB) 2 Nominal temperature 200 °C Electrical data Rated voltage / frequency 400V, 3/(N)PE, AC 50/60Hz Rated current 12.0 A Rated power 6.0 kW Connected load 7.0 kW Weight: 275kg Type: LTU 60/60 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), functionality: fully functional, Tennant Type: T7+ ec-H2O™ Compact design with high maneuverability Product description: Clean hard floors comfortably, nimbly, and economically: with the battery-powered Tennant T7+ ride-on scrubber-dryer. Thanks to its compact design, the ride-on machine is ideal for gaps and narrow aisles. The optional ec-H2O NanoClean technology reduces water and detergent consumption. Compact design – ideal for aisles and elevators. Clear sightlines and simple controls. Optimal water suction – no cleaning agent residue. Optional ec-H2O-Clean technology for reduced cleaning agent consumption. Easy-to-clean, hygienic tanks. Low noise level of 67 dB(A). Automatic brake and parking brake. Available in various working widths. Includes battery, on-board charger, and brush. Technical details: Area of application: Indoors. Battery operation: Voltage: 24 V. Battery type: Lead-gel battery. Battery capacity: 240 Ah/per unit. Frequency: 50-60 Hz. Kwedjv Tvq Hspfx Ad Nst Speed: 6.4 km/h. Direction of travel: Reverse, forward. Noise level in dB(A): 67 dB(A). Removable fresh/dirty water tank. Fresh water tank volume: 110 l. Dirty water tank volume: 110 l. Theoretical area coverage: 5120 m²/h. Practical area coverage: 5120 m²/h Working width 800 mm Brush diameter 400 mm Brush speed 260 rpm Brush contact pressure 36 - 73 kg Brush motor power 450 W Brush-assisted drive no Brush shut-off automatic yes Tires material rubber Wheels number 3 Non-marking wheels yes Wheel width 80 mm Wheel diameter 250 mm Turning circle 1840 mm Operator cockpit yes Squeegee material Linatex Squeegee width 1000 mm Suction motor power 450 W Body color Teal Frame color Teal Height 1270 mm Width 740 mm Depth 1270 mm Weight 443 kg Version with ec-H2O™ Rim material Polyamide Condition: used / Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: LTU 60/60 Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances of 40 % of the lower explosion limit (LEL) Highest temperature of the heating surface above 750 °C Device description: Technical data: Interior (usable space) 0.216 m3 Internal dimensions: Width 600 mm Height 600 mm Depth 600 mm External dimensions: Total width 796 mm Height 1725 mm Depth 850 mm Loading / load capacity Total roller conveyor 55 kg Loading height above installation floor 820 mm Weight (net) kg 275 Minimum exhaust air volume flow 96 m3/h Purge time 5-fold air change 90 sec. Increased recirculation air volume flow 33 m3/h Total vapor space 0.414 m3 Sound pressure level (according to DIN 45635) < 70 dB(A) Switch-off temperature Temperature limiter (TB) fixed setting 300 °C Temperature selector limiter (TWB) adjustable above nominal temperature 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TB) 1 Temperature selector limiter (TWB) 2 Nominal temperature 200 °C Electrical data Rated voltage / frequency 400V, 3/(N)PE, AC 50/60 Hz Rated current 12.0 A Nominal power 6.0 kW Connected load 7.0 kW Weight: 275kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Kedpfxsun Rrqs Ad Njwt We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), We offer here a Beko adsorption air dryer. BEKO activated carbon adsorber CLEARPOINT 2X times DRYPOINT dust filterS075RFWMX Kwjdenyh Tyopfx Ad Njt Kondensomat Bekomat 20 FM KA20K1ZAR BEKO activated carbon adsorber CLEARPOINT 2X Type: Beko adsorption dryer Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Year of construction: 2024, condition: new, machine/vehicle number: SPIN500, Co-lead Spin Dryer is a small-sized vegetable centrifuge machine that removes excess water from leafy vegetables and other fresh produce. The basket with the product is placed in the machine and once the lid is closed, the engine will start running. A magnet locks the lid during centrifuging. Suitable for dewatering leafy vegetables, fruit, and vegetable material surface after cutting. Kwsdpfxjiniz De Ad Not The body is made of SUS304 stainless steel, which has a delicate appearance. It is equipped with a basket for dehydration, which is more convenient to store. The machine can set the dehydration time and dehydration speed, and the operation is stable. It is suitable for all kinds of fruit and vegetable industries, and large and medium-sized industrial catering enterprises’ demand for vegetable dehydration. * Use frequency conversion centrifugal technology to complete the surface dehydration of the material; * Use frequency conversion technology and optical sensing technology to realize the draining time and speed, and turn on and off control. * Full open design, easy to install and take out during Vegetable Processing. * Driving by frequency conversion adjusting speed three or single asynchronous motor, stable running, convenient for speed adjustment

Year of construction: 2011, condition: excellent (used), Dry air dryer FarragTech CARD 10 S with container and 2 x suction conveyors ICEVA GS-4mD Kwodpox Iduuefx Ad Net Stock no.: 503577 Machine type / Device type: Dry air dryer Manufacturer: FarragTech GmbH Type: CARD 10 S Year of construction: 2011 Container volume: 10 ltr. Throughput: 2 h / 3.25 kg / 80° ABS Power: 1.1 kW Voltage: 230 Volt Hopper volume: 70 ltr Accessories: 2x suction conveyors ICEVA GS-4mD

Condition: excellent (used), Year of construction: 2014, Films up to 137 cm UV DRYER FCD-01 (S. No.: 82252 // Age: 2008) Kjdpfxexcamys Ad Nswt

Condition: used, Year of construction: 2012, functionality: fully functional, Adelco Jetforce Dryer 150 - Natural gas dryer - Belt width: 150 cm - Oven length: 300 cm Ksdpfx Ajx Nwinod Newt - Cooling bridge after the oven - Infeed belt: 200 cm - Outfeed belt: 150 cm The dryer is very efficient and reliable. We process output from two automatic MHM presses through it. Can be seen and tested daily in our production facility.

Year of construction: 2015, condition: excellent (used), Moretto XD20 (2015) Kwjdpfx Aox E Ur Eod Not Dehumidifier XD20 Dryer OTX60VP

Condition: reconditioned (used), Year of construction: 2013, operating hours: 777 h, functionality: fully functional, working width: 510 mm, area performance: 2,000 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO HAKOMATIC B45 TB510 SCRUBBER NEW 12V 105Ah SIAP GEL BATTERIES (2x) Manufactured in 2013 Machine has 777 hours of operation. 510mm cleaning head (TB510) equipped with a new medium-hard disc brush, allowing work on any surface. New polyurethane squeegee rubbers, resistant to contact with oily liquids, grease, and petroleum products. A built-in battery charger simplifies daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 510 Suction nozzle working width (mm): 860 Theoretical capacity (m²): 2000 Brush speed (rpm): 210 Tank capacity (l): 42/42 Machine weight, ready to use (kg): ~230 Power (kW): 1.31 INCLUDED: NEW GEL BATTERIES 12V 105Ah SIAP (2x) NEW suction turbine NEW suction hose Kjdpfx Adjxfadqj Njwt NEW drain hose NEW 510mm PPL 0.5 disc brush Squeegee with new oil-resistant rubbers Built-in battery charger 5 liter Tenzi Normal solution - FREE KEY FEATURES: The 42-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise solution extraction from the cleaned surface. The large working width (510mm) ensures high surface coverage. The control panel is easy to read and intuitive to use.

Year of construction: 2022, condition: like new (used), Immediately available, like new, 12-month warranty - For solvent-based materials according to DIN EN 1539 - Max temperature 150°C (can be increased upon request) - Useful volume 1,875 liters - Internal dimensions: W 1250 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Drive-in rails for loading the oven - Maximum allowable quantity of combustible materials at 150°C: 83.9 g - Minimum exhaust air volume flow at 20°C: 360 m³/h - Connection: 30 kVA, 3 x 400 V, 57 A, 50 Hz - Heating power: 36 kW - Net weight: 820 kg Kodoxbtvfspfx Ad Njwt - Loading trolley with 12 trays and 24 stainless steel shelf levels available separately; 4 units included in the offer - Documentation, CE Declaration Inspection at our warehouse by appointment. Oven, ovens, drying oven, firing oven, heating oven, heating cabinet, industrial oven, solvent oven, tempering oven, preheating oven, conditioning oven, drying cabinet, chamber oven, baking oven, circulating air drying cabinet, circulating air oven, paint dryer

Condition: excellent (used), For painting-finishing line (Ultra - Violet rays system) Max working width mm 1300 Total machine lenght: mm 2900 (ca.) Workpieces thickness (working height): mm 0 - 80 (ca.) Adjustable feeding speed: m/min 0 - 40 (ca.) PLC control panel (Touch Screen) Built-in electric and command panel Total installed power KW 36.9 Equipped with: No. 2 U.V. lamps Motorized feeding system by metal rods runned with two side-chains In-feed suction system (to take in the air) Kjdpegz Svnefx Ad Nowt Out-feed suction system (to take away the solvent fumes)

Condition: excellent (used), For painting-finishing line (Ultra - Violet rays system) Max working width mm 1300 Kedpfjgz Svgsx Ad Njwt Total machine lenght: mm 4000 (ca.) Workpieces thickness (working height): mm 0 - 80 (ca.) Adjustable feeding speed: m/min 0 - 40 (ca.) PLC control panel (Touch Screen) Built-in electric and command panel Total installed power KW 54.9 Equipped with: No. 3 U.V. lamps Motorized feeding system by metal rods runned with two side-chains In-feed suction system (to take in the air) Out-feed suction system (to take away the solvent fumes)

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Kwjdpfxjxgq I Nj Ad Njt Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw A total of four dryers of this model are available. Kwsdpfx Ajxgr Hgsd Net