Used Gmx 250 Linear for sale (18,732)

Condition: used, functionality: fully functional, overall weight: 20 kg, -KOM 3124- Offered here is a used Brinkmann submersible pump, model TA 302/250. Hnsdpfxewl U Aqj Ah Nog The pump can be mounted directly on a tank. Dimensions: approx. (550 mm x 180 mm x 210 mm) Submersible depth: 250 mm Weight: approx. 20 kg Voltage: 230/400 V Frequency: 50 Hz Current: 4.3 / 2.5 A Speed: 2850 rpm

Condition: excellent (used), Chain hoists - DEMAG / STAHL - LIFTKET - 14 units: 1. Demag DKUN 10 - 2000 kg. 2. Demag PK 10 - 1000 kg. 3. Demag DKUN 5 - 500 kg. 4. Demag D-BE - 160 kg. 5. Demag PK 2 F - 500 kg. 6. Demag PK 2 N-F - 250 kg. 7. Demag PK 1 N - 125 kg. 8. Demag DKUN 2 - 250 kg. Hjdpfx Ahsvv Idws Njng 9. Demag PK 2 N - 500 kg. 10. Demag PKVUN 1 - 125 kg. 11. Demag PKUN 1 Motor - 125 / 250 kg. 12. Steel T 405 M - 1000 kg. 13. Steel T 302 S - 500 kg. 14. Liftket Star 021/51 - 500 kg.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, table width: 1,700 mm, table length: 2,000 mm, passage height: 250 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Hedpfxsvvlyij Ah Njng KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, controller model: Cybelec DNC 1200, bending force (max.): 250 t, working width: 3,550 mm, distance between stands: 3,000 mm, overall weight: 18,500 kg, TECHNICAL DETAILS Press force: 250 t Bending length: 3,550 mm Distance between uprights: 3,000 mm MACHINE DETAILS Controlled axes: y1, y2, x, r, z1, z2, back gauge tilt Control unit: Cybelec DNC 1200 Dimensions & weight Footprint (L x W x H): approx. 4,300 x 2,750 x 3,750 mm Machine weight: approx. 18,500 kg Hnjdpfxex I Ebio Ah Neg EQUIPMENT Two-hand foot switch Lasersafe Fisseler Hydraulic tool clamping top and bottom Die shifting Hydraulic crowning Support arms 1 set of upper and lower tools Safety guard

Condition: like new (used), Year of construction: 2012, input voltage: 400 V, 2 X Zentner Washer 250 - Screen Cleaning Units Unit 1 Unused and New Condition $20,000.00 USD Unit 2 Used - Excellent Condition $16,000.00 USD Hedpfxjv Dpy Nj Ah Nsng

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1114.3705-24, Used CNC Lathe Make: Boehringer Type: VDF 250Cm Year of Manufacture: 1997 VDF Boehringer 250C The machine has the following features: 1000mm turning length No tailstock Driven tools Special indexing chuck Siemens 840C control system The Boehringer VDF 250Cm is a CNC lathe designed for machining chucked parts. It is characterized by its robust construction and precise machining capabilities. Technical Specifications (Model Year 1997) Working Area: Swing over Bed: 550 mm Swing over Cross Slide: 480 mm X-Axis Travel: 405 mm Z-Axis Travel: 1,099 mm Maximum Turning Length: 1,000 mm Hodpfx Aswlap Aoh Neng (None) Tailstock: Tool Turret: Number of Positions: 12 Tool Holder: VDI 50 DIN 69880 Live Tools: YES Spindle: Spindle Head Size: 8 DIN 55026 Spindle Bore: 103 mm Max. Chuck Diameter: 315 mm Max. Drive Power (50% Duty Cycle): 53 kW Max. Torque: 780 Nm Speed Range: 30–3,000 rpm Feeds: Automatic Feeds: 1–10,000 mm/min Rapid traverse speed: 10 m/min (X and Z axes) Max. feed force: 15 kN Dimensions and weight: Machine dimensions (L × W × H): approx. 5,400 × 3,200 × 2,400 mm Machine weight: approx. 11,000 kg Equipment: Pivoting control panel Hydraulic system from HYDROKRAFT Coolant system with 600 l tank, max. pump pressure 5.5 bar, flow rate 60 l/min, pump power 1.1 kW Chip conveyor with 325 l tank capacity, right-hand discharge 3-jaw power chuck Oil mist extraction Control cabinet with cooling unit and temperature controller from RITTAL Control system: SIEMENS SINUMERIK 840 C Variants and Differences There are various variants of the VDF 250 series, such as the VDF 250 CU, which can be equipped with different control systems (e.g., PHILIPS B2T) and technical specifications. Some models feature driven tools and a tailstock, while others are designed as pure chuck-type lathes without a tailstock. Conclusion The Boehringer VDF 250 Cm is a versatile CNC lathe characterized by its stability and precision. With its robust construction and extensive features, it is ideally suited for machining chucked parts in a variety of production environments.

Condition: used, L + Z Lathe WEWAG Model 250 / 1500 make no. 20953 year of construction approx. 1975 center distance 1500 mm nominal turning diameter over bed Ø 500 mm turning diameter over bed max. Ø 510 mm Center height over bed 255 mm turning diameter over support Ø 300 mm Center height over support 150 mm spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm. 24 steps lathe chuck support short taper DIN 55022 tailstock inner taper MK 5 drive power 4 kW and 6,7 kW pole-changing - 3-jaw lathe chuck BISON, Ø 250 mm - steel holder 4-fold for turning - fixed lynette - control cabinet fixed on the back of the machine weight 2500 kg Hnsdpfxslzm Eqe Ah Neg

Condition: excellent (used), Year of construction: 2012, WALTER WD 250/350 30 and 37 kW shaft multisaw – Polish production – year of manufacture 2012 – DTR and CE TECHNICAL PARAMETERS: cutting height 170 mm cutting width 350 mm spindle diameter 2 x 70 mm diameter of circular saw blades 300 mm spindle motor 30 kW and 37 kW feed motor 1.5 kW seven lower pulling rollers two upper toothed pulling shafts length of the feeding table 3000 mm spigot diameter belt collecting waste from under the machine 2 x 200 mm Hnjdpsmv Elpefx Ah Nog dimensions (length / width / height) 320 / 200 / 200 cm weight 2000 kg

Condition: good (used), Year of construction: 2012, clamping force: 2,800 kN, Equipment: documentation/manual, Demag Systec 280/630-600 (2012) Clamping force: 280 t Screw diameter: 45 mm Shot weight: 294 g Distance between tie bars V: 630 mm Distance between tie bars H: 630 mm Shot volume: 323 cm3 Type: Horizontal Drive: Hydraulic Hnjdpfx Aoxykw Reh Nog

Condition: excellent (used), Catalogue number 7861 TECHNICAL DATA - Workpiece length: 2500 mm - Workpiece width: 800 mm - Main motor approx. 4 kW - Grinding belt width: 170 mm Hnjdpfx Aex U Tnqeh Neg - 2 speed settings - Extraction port diameter: 2x120 mm - Overall dimensions (L/W/H): 3640x1220x1500 mm - Weight approx. 800 kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Used sander, in very good condition Net price: 6900 PLN Net price: 1640 EUR at an exchange rate of 4.2 PLN/EUR (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2016, Schraml Topdrill M-RX 130 Vertical cnc glas milling and drilling centre Processing: Hodpfow Skzhjx Ah Njng Max. Glas-Length: 3.200 mm Max. Glas-height: 1.300 mm Min. Glas-length: 600 mm Min. Glas-height: 130 mm Thickness: 4-20 mm Options: - 2x Elektrospindle 5,5 kW 0-12.000 U/Min - Tool Magazin with 2x 8 slots - CAD/CAM - central lubrification

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, • Turret overhauled in 2021 • Coolant pump upgraded to higher pressure/flow rate in 2021 • Draw tube replaced and spindle head newly mounted and ground in 2022 • Prepared for automatic loading of parts via robot cell Control: CNC control including Siemens 840 D color screen TECHNICAL DATA Maximum swing diameter: 550 mm Maximum turning diameter: 480 mm Turning length: 1000 mm Spindle bore: 78 mm Drive power (50%): 53 kW Speed range (single stage): 30 – 4000 rpm Drum turret Number of stations: 12, of which powered: 6 Tool shank diameter: 40 mm Speed range (two-stage): 20 – 2500 rpm Tailstock (hydraulic quill adjustment) EQUIPMENT / ACCESSORIES Hedpfowwkx Eox Ah Njng  Full enclosure including work area lighting  Automatic power-operated sliding door  C-axis  Tailstock programmable drag function including various center points  12-position drum turret  Turret drive unit  Chip conveyor  Coolant system with reinforced pump, approx. 4 bar  Interface for automation  Various accessories  1 pc. Heimbuch collet chuck SK 80, without collets  1 pc. Schunk Rota NCF 315 three-jaw chuck  1 pc. Schunk Rota NCF 250 three-jaw chuck  1 pc. Schunk Rota NCF 250 two-jaw chuck  1 pc. WTO broaching head  2 pcs. driven tools CAPTO axial tool  2 pcs. driven tools CAPTO axial radial tool  3 pcs. driven tools CAPTO radial tool  7 pcs. static tool holders  Installation elements  Documentation

Condition: used, Year of construction: 2007, functionality: fully functional, film width: 1,500 mm, ILLIG Universal Thermoformer UA 250 1G with BE 250 sheet / roll, sheet size max. 2500 x 1500mm, forming area max. 2450 x 1450mm, mold height max. 860mm, material thickness max. 12mm Equipment machine: > automatic loading including roller block and Sheeter for additional roll production > Screen controls > Upper and lower heating can be regulated via 4 zones > Automatic pre-blow and demolding Hodpfoft S Eaex Ah Nong > Vacuum cascade can be set to 5 percentages - table speed, upper punch speed, pre-blowing, demoulding, table vacuum > 8-fold air-blowers D06 > Lot control at the table > Ball table for easier mold changes > pneumatic blow box ventilation > Plate loading with centering table > Various clamping frames / window panels incl. We offer the machine in the following technical state: 1. technically tested with dry run acceptance 2. technically overhauled, blending in green, tested with dry run acceptance 3. technically overhauled, completely repainted in white and blue, tested with acceptance in dry running (example image in white / blue)

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 199479, clamping force: 250 kN, screw diameter: 30 mm, Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 270U 250-170 injection moulding machine. Fitted with a Selogica controller. This machine is the four tie bar variant with good size platens for maximum versatility from a small clamp machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Hodpsx U Ax Eofx Ah Neng Please note that the video shown is of a near identical machine previously refurbished by STV Machinery. It’s a good example of what can be expected once this machine is fully refurbished by our team.

Condition: excellent (used), Year of construction: 2016, Equipment: documentation/manual, Engel victory 1350/400 tech (2016) Controll : CC300 Clamping force: 400 t Screw diameter: 55 mm Shot weight: 560 g Distance between tie bars V: 1100 mm Distance between tie bars H: 1220 mm Shot volume: 618 cm3 Type: Horizontal Drive: Hydraulic 8x core pullers 2x pneu valve conveyor Wittmann linear robot Hnodpfxsx H Nk Ee Ah Nog

Condition: good (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 650 mm, controller manufacturer: Siemens, controller model: Sinumerik 840 D, rotational speed (max.): 18,000 rpm, overall weight: 14,000 kg, spindle speed (max.): 18,000 rpm, coolant supply: 70 bar, number of spindles: 1, number of slots in tool magazine: 180, Horizontal machining center DECKEL MAHO DMC 60 H Linear with double pallet changer and 180 tool magazine positions Year of manufacture: 2009 Control: Sinumerik 840D Technical data: Spindle speed: 0–18,000 rpm Drive power: 35 kW Torque: Hnedpfx Aox Dlgnsh Njg Spindle taper: HSK 63 Number of magazine positions: 180 pcs Number of pallets: 2 Pallet size: 500x500 mm Travel distances: X-axis: 630 mm Y-axis: 800 mm Z-axis: 650 mm C-axis: 0.001° All axes with linear drives Equipment: -Coolant system -Chip conveyor The machine has been regularly maintained and is still very precise! More pictures will follow. Video available on request.

Condition: used, Year of construction: 2007, 106 369-11 bore diameter 3 - 65 mm number of spindles 1 total power requirement 45 kW . Siemens control Simens Sinumerik . weight 45 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Hodpjwizn Usfx Ah Nsng Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Thermo Scientific Heratherm Thermo Scientific Heratherm OMS180 Forced Air Drying Oven – 250 °C Product Description: For sale is a Thermo Scientific Heratherm OMS180 forced air drying oven. The unit comes from laboratory use and is in good used condition. Heating, forced air circulation, and controls are fully functional. Suitable for laboratory, industrial, educational, research, material and sample drying applications. Technical Specifications: Manufacturer: Thermo Scientific Model: Heratherm OMS180 Max. temperature: 250 °C Temperature control: Digital Interior: Stainless steel Forced air operation: Yes Power supply: 230 V / 50–60 Hz Power consumption: approx. 3.06 kW Protection rating: IP20 Weight & Dimensions: External dimensions (W × D × H): approx. 620 × 630 × 800 mm Internal volume: approx. 180 liters Weight: approx. 75 kg Important Note: “The table shown in the photos is not included in the sale.” Condition: used Hsdpfx Ahjx Uxz Ae Nong Scope of delivery: (See pictures) (Specifications and technical data are subject to change and errors!) If you have any further questions, feel free to contact us by phone.

Condition: reconditioned (used), functionality: fully functional, Technical Specifications: - Maximum material size: 2500 x 1500 mm - Maximum forming area: 2450 x 1450 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Equipment: Forming Station - Schleicher P03 control system - Automatic setup function - Top heater: ceramic emitters (500 W) with 4-zone control - Individual selection of upper heating elements, including lowering - Bottom heater: ceramic emitters (300 W) with 4-zone control - Individual selection of lower heating elements, including lowering - Program and heating settings storage - Clamping frame with quick-change system - Parallel upper frame, longitudinal runners for use of fixed format frames - Lower clamping frame for frame installation from below, central clamping via E-motor - Pneumatic lower table with rapid/creep speed, adjustable in 15 steps via control panel - Upper punch with rapid/creep speed, adjustable in 7 steps - Vacuum pump with cascade control, adjustable in 15 steps via control panel - Pre-blow automation, percentage adjustable - Pre-vacuum adjustment, percentage adjustable - Automatic demolding, percentage adjustable - Plate sag control via light barrier with support air - 8-fold cooling fan with spray nozzle cooling - Large front opening for tool change Loading Hjdpfxowf Eb Re Ah Neng - Automatic sheet loading system - Centering table for precise positioning of sheets in the feeder - Motorized sheet lifter - Motorized sheet positioning adjustment - Motorized transport lifter - Motorized adjustment of transport width

Condition: used, Year of construction: 2017, functionality: fully functional, Equipment: rotational speed infinitely variable, Pinacho lathe Type SC 250 Year 2017 Hnedpox Ux Dwjfx Ah Nsg With digital readout Centre distance 1500 mm Complete

Condition: like new (used), Year of construction: 2023, SEPRO Success 11C (2023) Linear cartesian robot , 1500mm Number of axis: 3 X = 1500 mm Y= 500 mm Z= 1000 mm Payload: 5 kg Euromap 67 More information in photos of this robot, complete manuals available. SEPRO SUCCESS 11 – Technical Data (Summary) Robot type: Success 11 Serial number: R009519 Mechanics 1. Payload: 5 kg 2. Robot weight: 204 kg 3. Robot dimensions: 2430 × 1200 × 1570 mm 4. Max. pneumatic pressure: 7 bar 5. Air consumption: 140 l/min (normal), 260 l/min (peak) Stroke axes X-axis (horizontal stroke): 1. Stroke: 1500 mm 2. Speed: 2.0 m/s 3. Repeatability: ±0.1 mm Y-axis (horizontal take-out): Hjdpfx Aex Dnc Sjh Nsng 1. Stroke: 500 mm 2. Speed: 2.0 m/s 3. Repeatability: ±0.1 mm Z-axis (vertical): 1. Stroke: 1000 mm 2. Speed: 3.0 m/s 3. Repeatability: ±0.1 mm Rotations 1. R1 pneumatic rotation: 0–90° 2. R3 pneumatic rotation: 0–180° or 0–90° Control system – Visual 2 1. Weight: 43.5 kg 2. Dimensions: 550 × 400 × 295 mm 3. Power supply: 3×400–480 V ±10% 4. CPU: i.MX537 / Cortex A8 @ 800 MHz 5. Memory: 512 MB DDR + 512 MB Flash 6. SD card: 4 GB 7. I/O: 8. Robot: 16 inputs / 16 outputs 9. Cabinet: 7 inputs / 8 outputs 10. USB ports: 1× Master USB, 1× Slave USB 11. Ethernet 10/100 Pneumatics 1. 2 pneumatic circuits 2. Vacuum and pressure functions available Environmental conditions 1. Operating temperature: +5 to +40 °C 2. Storage temperature: –25 to +55 °C 3. Humidity: 30–95% (non-condensing) 4. Protection rating: IP22 / IK07 Options 1. PC Editor (Windows XP to Windows 7) 2. Conveyor control (3×42V AC to 3×550V AC) 3. Safety kit for access door 4. 1× conveyor

Condition: new, The ZNC-EDM 250 is a cutting-edge die sinking EDM machine in the Die Sinker EDM category, which is part of the EDM Machines group. Designed for mold and tool making, this machine excels in replicating injection molds and matrices with exceptional precision and surface quality. Its user-friendly CNC control streamlines the selection of work parameters, while the robust frame, equipped with preloaded ball screws on all axes, ensures low maintenance and high accuracy. The advanced spindle design with a dedicated lubrication circuit minimizes friction, thereby optimizing performance. With a compact design, this machine allows for efficient small part machining and features a separate dielectric reservoir for sustainable operation. Diagnostic systems contribute to the user-oriented experience, making it easy to learn and operate. For high-powered material removal and finishing in one process, the finely-incremented work parameters fulfill diverse operational needs. Don't miss the chance to enhance your production with this reliable machine—order online today to experience the precision and efficiency that KNUTH offers in the Die Sinker EDM category. Hnjdpfx Aheng Ai Ie Nsg

Condition: used, Year of construction: 1999, cutting width 150 mm machine weight ab. 300 kg 27468 Hodsva Nqgjpfx Ah Nong

Condition: reconditioned (used), Year of construction: 2006, CNC Lathe GILDEMEISTER CTX 420 linear Equipped with Siemens 840 D powerline control Year of manufacture: 2006 Max. turning diameter: 324 mm Max. turning length: 600 mm Max. swing diameter: 680 mm Spindle bore: 79 mm Max. spindle speed: 4,500 rpm Including the following accessories: Sliding guard with interior lighting 12-position turret with 12 driven stations Hjdpfxoxzt Dco Ah Njng Y-axis, C-axis Tool measuring device Parts catcher 3-jaw hydraulic chuck 210 mm with foot switch Hainbuch hydraulic collet chuck IRCO Breuning RBK 10012 bar feeder Signal lamp Tailstock with quill Chip conveyor Oil mist extraction Coolant system with high-pressure coolant (IKZ) and belt filter unit Operating manuals

Condition: good (used), Year of construction: 2001, M01.43870 frequency 50 Hz voltage 400 V 24 V Hnjdpfxerc Ip Se Ah Nsg connected load 48 kW rated current 63 A control Siemens 840 D turning diameter 250 mm turning length 100 mm weight of the machine ca. 7,5 t turning length external / innen 100 mm workpiece length - min. 29 mm workpiece length - max. 100 mm