Used Gmx 250 Linear for sale (11,792)

Condition: refurbished (used), Year of construction: 2006, machine/vehicle number: 0372PO183, Model: JSO-IV-40-22TF Dkjdpfx Aioy Icgiswjl Year: 2006 Serial number: 0372PO183 Stock number: 1180G Belt width: 40 inch, 1010 mm Heating: thermal oil, 2 x 460kW Steam: max 2 x 545 kg/hr Compressed air: 6 - 10 Bar Power: 3 x 400V, 50Hz, 63kW Dimensions: 22500 x 3000 x 3000 mm Automated cleaning in place (CIP): Continuous hot water, single pass, belt washer with Stein Humitroll moisture monitoring and control.

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter Dksdoy Ia Ttepfx Aiwel • electrical control unit • compressor.

Condition: new, Year of construction: 2025, functionality: fully functional, The weighing system is also designed for mixing up to 4 products. Each of the 4 units can be programmed individually. Dksdpfeya Ahvsx Aiwsl The system can be tested at our test center, 20 km from Frankfurt am Main. Features - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing: coarse/intermediate/fine dosing, each programmable individually - Tool-free format changeover Technical data - Weighing range: 20g to 4000g - Accuracy: up to 0.5g, depending on product - 6-liter weighing hopper - Max. speed: 60 weighing cycles/minute - Weight: 240kg - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Linear Weigher: Gentle and Precise Filling Technology Dkodpfeyazywex Aiwol Our linear weigher is the ideal solution for simple and accurate dosing and filling of products. It seamlessly combines precision with gentle handling. Thanks to the minimal drop height, product damage is effectively avoided, ensuring the quality of your goods, even with sensitive items. Flexible and Efficient Operating Principle The core of our technology is a simple yet highly effective operating principle: Products are conveyed via linear belts or vibratory feeders and precisely dosed into the weighing bins. Features: - Easy operation and cleaning - Convenient control via color touch screen - Memory for different weighing recipes - Precise weighing results through three-stage weighing (coarse / medium / fine), each stage individually programmable - Tool-free format change - Intuitive design enables quick changeover and easy cleaning - Gentle handling: minimal drop height protects delicate and fragile products - Versatile: flexible use in both food and non-food sectors - Accurate dosing ensures consistent product quality - Robust and hygienic: parts made from 304 stainless steel, easy to clean - Compact design and durable construction save space and reduce maintenance effort With our linear weigher, you receive a reliable, precise, and hygienic solution that enhances the efficiency of your production processes. Technical data - Weighing range: 20g to 2,000g - Accuracy: up to 1g, depending on product - 4.5-liter weighing bin - Max. speed: 30 weighings/minute (double-head weigher) - Material: stainless steel 304 (V4A / 316 on request) - Connection: 220V / 50Hz / 6A

Condition: used, Year of construction: 2002, operating hours: 14,700 h, machine/vehicle number: 15115220514, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D/810D, total height: 2,650 mm, total length: 4,472 mm, total width: 2,780 mm, overall weight: 12,500 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 14,700 h, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: documentation/manual, Particularly interesting for export customers: Proper disassembly allows the machine to be loaded onto a standard semi-trailer with approximately 2.45 m loading width. Our disassembly team can prepare and load the machine accordingly. As a result, transport costs can be significantly reduced compared to a special transport. Technical Data Manufacturer: DECKEL MAHO Model: DMF 220 linear Year of manufacture: 2002 Dkedpfxey Nn Eyo Aiwjl Machine No.: 15115220514 Control: Siemens SINUMERIK 840D/810D Operator interface: ShopMill ShopMill version: 06.02.04 PLC version: 06.03.06 Tool holder: SK 40 Working spindle: up to 12,000 rpm Tool magazine: 30 stations Table size: 2,600 × 600 mm Max. table load: 2,200 kg Travel paths: X 2,200 mm / Y 560 mm / Z 720 mm Feed rate: up to 20,000 mm/min Rapid traverse X: 18,000 mm/min Rapid traverse Y/Z: 15,000 mm/min Machine weight: approx. 12,500 kg Transport weight: approx. 14,000 kg Max. installation weight: approx. 16,000 kg Electrical Data Connected load: 50 kVA Max. current consumption: 60 A Main fuse: 80 A Power supply: 400 V / 50 Hz Control voltage: 24 V Supply voltage: 230 V Electrical diagram available Equipment / Special Features Siemens SINUMERIK 840D/810D ShopMill operator interface SK40 tool holder 30-station tool magazine Large X-axis with 2,200 mm travel Rigid table design Documentation / technical documents available Electrical diagram available Machine under power Year of manufacture: 2002 Made in Germany Transport optimization possible through disassembly Loading onto standard semi-trailer possible Considerably lower transport costs compared to wide-load/special transport

Condition: used, operating hours: 16,911 h, Vehicle No.: 407-25 HITACHI ZX 250 LCN-3 Year of manufacture: 2008 * 132 kW * Hammer circuit * Quick coupler * Cabin protective grille Dkodpfx Asxw Apmoiwjl * Undercarriage approx. 70% Inspection possible at any time during our business hours, test drive by appointment! For export sales, a deposit will be retained and refunded upon receipt of the confirmation of arrival. Company logos or advertising markings on the vehicles may have been digitally edited in the photos. No guarantee is given for the functionality of the extras. All information is provided without guarantee - subject to errors, changes, typographical mistakes and prior sale. Vehicle descriptions explicitly do not constitute guaranteed characteristics. We refer to our General Terms and Conditions, which must be acknowledged.

Year of construction: 2018, condition: used, Manual underfloor circular saw for saw blade up to Ø 250 mm Swivel range for miter cuts -45°/90°/+30° Working area (Round) 90° 80 mm Dedpfx Aijy Nm N Rswekl (Round) 45° 80 mm (Square) 90° 70 mm (Square) 45° 65 mm 220 V

Condition: excellent (used), mileage: 46,000 km, power: 180 kW (244.73 HP), first registration: 04/2005, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,680 mm, fuel: diesel, brakes: retarder, gearing type: automatic, emission class: euro3, suspension: air, total length: 7,000 mm, total width: 2,450 mm, permissible axle load (axle 1): 5,000 kg, permissible axle load (axle 2): 9,200 kg, Year of construction: 2005, Equipment: ABS, differential lock, power assisted steering, retarder, = Additional Options and Equipment = - Power brake booster - Differential lock - High beam headlights - Air suspension - Air horn - Radio/CD player - Beacon light - Hose assemblies - Sun visor - Toolbox - Power Take-Off (PTO) = Further Information = Cabin: double Front axle: Max. axle load: 5,000 kg; Tyre tread left: 90%; Tyre tread right: 90% Rear axle: Twin tyres; Differential lock; Max. axle load: 9,200 kg; Tyre tread left inner: 90%; Tyre tread left outer: 90%; Tyre tread right inner: 90%; Tyre tread right outer: 90%; Suspension: air suspension Dedpey Nmdzofx Aiwekl Number of cylinders: 6 Unladen weight: 10,020 kg Payload: 3,480 kg Gross vehicle weight (GVW): 13,500 kg Technical condition: very good Optical condition: very good

Condition: used, Year of construction: 2020, For sale is a sprue picker robot from Sepro. Technical data: • Type: Industrial Robot Dkodjy Nlpvepfx Aiwsl • Year of manufacture: 2020 • Control unit: MPA 2 P • Payload: 2 kg • Equipment: Standard version with gripper

Condition: new, Year of construction: 2019, x-axis S400 mm y-axis S800 mm z-axis S1800 mm control SELOGICA (AMS) weight of the machine ca. 350 kg dimensions of the machine ca. 2,50x1,50x2,50 m ARBURG MULTILIFT SELECT 6 kg – Linear Robot System (Transverse Version) General Specifications - Manufacturer: ARBURG - Model: MULTILIFT SELECT 6 kg transverse - Year of manufacture: Net weight: approx. 350 kg Performance & Load Capacity - Maximum payload: 6 kg Control & Pneumatics - Control system: SELOGICA - Pneumatic operating pressure: 0.6 MPa - Axis configuration - Rotation axes A/B/C: - / 180° / 90° Travel ranges: - X-axis: 400 mm - Y-axis: 800 mm - Z-axis: 1800 mm Machine type Dsdjywzvzepfx Aiwokl - Linear robot for injection molding automation - Cross-axis removal system

Condition: used, Year of construction: 2003, max. Spindle speed 5000 U/min. travel -x axis 160 mm travel -z axis 450 mm numbers of turret head positions 12 tool taper VDI 30 Control Heidenhain iT Plus Dimensions (L x W x H) 4,5 x 2,5 x 2,5 m weight of the machine 3700 kg CNC Turning- and Milling Center | DMG GILDEMEISTER - CTX 310 Djdpov Ehawsfx Aiwskl Additional equipment: - C-Axis The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CTX310 | CTX-310

Condition: good (used), Year of construction: 1984, max. wheel diameter 250 mm gear width 275 mm max. module 6 weight of the machine ca. 5,5 t The gear hobbing machine ZFWZ 250 is suitable for the economical production of all hob-processable cylindrical gear types, such a: - spur and helical gear, wormgears and worms, splined shafts, keyed shafts, serrated profiles, chain wheels and ratchet wheels,as well as conical and crowned spur and helical gears. Interchangeable wheels and milling accessories Dksdpfx Aov T Nqasiwsl Technical data: - Workpiece diameter (max): 250 mm - Module (max): 6 mm - Axial feed travel (max): 275 mm - Tangential feed travel (max): 100 mm - Tooth helix angle (max): 45 degrees - Milling cutter diameter (max): 145 mm - Milling cutter length (max): 170 mm - Table clamping surface (min): 195 mm - Table clamping surface (max): 470 mm Power Milling cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (special version DC motor): 140 ... 400 rpm Weights - Machine net: approx. 5000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip transport: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3950 mm DC drive: 3450 mm (or 3350 mm according to table) - Width: 3300 mm - Height: Machine: 1980 mm Machine with DC drive: 2150 mm Electrical cabinet: 2200 mm

Condition: used, Year of construction: 1998, workpiece diameter with ratio 1:10 300 mm workpiece diameter with ratio 1:1 212 mm Dedpfx Aoul El Teiwjkl max. number of teeth 200 min. number of teeth 6 x-travel 300 mm X - Axis speed 0,1-5.000 mm/sec. y-travel 400 mm Y - Axis speed 0,1-5.000 mm/sec. A - axis -170 / +170 ° control Siemens Sinumerik 840 C total power requirement 38 kW weight of the machine ca. 10 t dimensions of the machine ca. 4,20 x 2,20 x 2,10 m incl. suction

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2006. It features a maximum spindle speed of 6000 rpm and a robust tool capacity of 100 tools in the automatic tool changer. The machine is equipped with twin pallets, enhancing productivity and efficiency. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. • Twin pallet Dedpfey H D T Uox Aiwokl Technical Specification Taper Size SK 50

Condition: used, mileage: 282,100 km, power: 188 kW (255.61 HP), first registration: 09/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2025, color: white, gearing type: mechanical, emission class: euro5, * VDL hooklift truck with flatbed + tarpaulin and tail lift body * Radio * Air conditioning * 3-seater * Manual transmission * 2nd axle steered * Flatbed with tarpaulin body and tail lift, electric side curtain Dkedpey Nhlyjfx Aiwsl -----Internal vehicle number: 11365 + 11365a1 + 11365a2----Errors & intermediate sale excepted WhatsApp support available! If you have questions about the vehicle or want further information, feel free to contact us conveniently via WhatsApp Whatsapp German, English -- Whatsapp German, English, Arabic

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 745 mm, travel distance Z-axis: 300 mm, spindle motor power: 18,000 W, spindle speed (max.): 4,500 rpm, total height: 3,200 mm, overall weight: 7,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840Dsl, number of axes: 2, This EMAG VSC 250 vertical turning machine was manufactured in 2014. It features a powerful main spindle drive with up to 28kW power at 40% duty cycle and a speed range of 0-4500 rpm. Equipped with a Siemens SINUMERIK 840Dsl control system and a robust 12-position EMAG flange turret, it ensures precise and efficient operations. Ideal for handling workpieces up to 6kg with its specialized hydraulic chuck. For more information about this vertical turning machine, please reach out to us. Additional equipment • Coolant tank capacity: 360 liters Machine Benefits Technical Machine Benefits Dkedsytfppopfx Aiwel • High working accuracy, rapid traverse speeds, high maximum speed of driven tools • Machine from single shift operation • Maximum room temperature: up to 30°c • Maximum humidity: 50% • Sound pressure level: 78db(a) Extra Information Machine still under power Dimensions Machine Depth 3900 mm Technical Specification Through-spindle Coolant Yes

Condition: used, mileage: 20,373 km, power: 140 kW (190.35 HP), first registration: 08/2024, fuel type: diesel, empty load weight: 2,475 kg, maximum load weight: 725 kg, overall weight: 3,200 kg, fuel: diesel, color: grey, gearing type: automatic, suspension: other, number of seats: 5, total length: 5,140 mm, number of beds: 4, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), onboard computer, parking heater, second-hand vehicle warranty, soot filter, traction control, trailer coupling, Cab air conditioning, pilot seats, swivel seats, Mercedes chassis, blower heater, living area air conditioning, sun awning, pop-up roof with double bed, convertible seating/bed, touchscreen, lumbar support, 5 seat belts, thermal insulated windows, clock & tachometer, brake pad wear indicator, auto-dimming exterior mirrors, 360° camera, metallic paint, 4 doors, one owner, Euro6e, green environmental sticker (4), fabric upholstery, privacy tinted windows, trailer maneuvering assistant, fully digital instrument cluster, Apple CarPlay, Android Auto, glare-free high beam, distance warning, reversing camera, black, passenger airbag, front side airbags, front window/head airbags, right-hand sliding door, navigation with color monitor, color monitor for navigation system, leather steering wheel, shift paddles, parking assistance camera, rear parking sensors, front parking sensors, digital radio, electrically folding exterior mirrors, dual electric window operation, seat heating, front seat heating, multifunction steering wheel, live information system, Radio/MP3, outside temperature display, colored glazing, heated exterior mirrors, auto-dimming interior rearview mirror, power steering, non-smoking vehicle, electric exterior mirrors, brake assist, adaptive cruise control, alloy wheels, detachable tow hitch, rear-wheel drive, third brake light, center armrest, German market version, new inspection/roadworthiness (HU/AU), additional features available, subject to errors and prior sale. Trade-in possible. Financing available—please contact us, and we will provide a tailor-made offer. Options/Features: 553 Trailer Maneuvering Assistant B25 Electric Parking Brake BA3 Active Brake Assist BH1 HOLD Function C6L Multifunction Steering Wheel CA3 Active Steering Assist Dkedpfxsy Nfg Ie Aiwsl CA4 AIRMATIC CA5 Camper Level Control CK8 Steering Wheel Heating CL1 Steering Wheel Adjustable in Tilt and Height CL3 Leather Steering Wheel CU4 Aerodynamics Package E07 Hill Start Assist E1D Digital Radio (DAB) E1E Digital Extra: Hard Disk Navigation E1T Touchpad E28 Additional Battery for Retrofit Consumers E4S Digital Extra: Smartphone Integration E7H Multifunction Display

Condition: excellent (used), functionality: fully functional, Stozza Cams 250 Model 250 Sac Tool stroke: 250 mm Distance between column and toolholder: 425 mm Distance between table and end of upright: 520 mm Dodpfxey Nc N Hs Aiwekl Ram travel: 430 mm Table size: 340 x 560 mm Table travel: 350 mm Number of strokes: 16–60

Condition: ready for operation (used), Year of construction: 1996, operating hours: 5,387 h, functionality: fully functional, overall weight: 191 kg, total length: 1,500 mm, The machine was a backup unit intended to ensure uninterrupted operation, but its capacity is now too small for our needs, so we are selling it. We’ve only turned it on occasionally over the past 10 years or so. It can be tested on-site. Dksdpjy Ncn Aofx Aiwel

Condition: ready for operation (used), Year of construction: 2005, operating hours: 23,607 h, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, table load: 800 kg, overall weight: 9,500 kg, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis DMC 104 V linear was manufactured in 2005. It features an impressive X-axis travel of 1040 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine includes a robust clamping surface of 1250 mm x 600 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMC 104 V linear vertical machining centre we have for sale. Contact us for further details. Dkedpfx Aeyu Sc Sjiwol • Spindle hours: 12,600 • Tool positions: 30 • Control: iTNC 530 • Clamping surface: 1250 mm x 600 mm • Transport weight: approx. 9.5 t • Control: iTNC 530 Additional equipment • 4th axis: Lehmann EA-420 Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2004, operating hours: 9,203 h, functionality: fully functional, machine/vehicle number: 8040939522C, total height: 2,276 mm, total length: 6,205 mm, total width: 2,214 mm, overall weight: 12,000 kg, For sale is a high-quality CNC lathe, model Gildemeister CTX 620 Linear, year of manufacture 2004. The machine underwent a comprehensive overhaul and technical refurbishment in 2025, during which various components were replaced. This overhaul by DMG Used Machine alone cost €60,000. A brief overview of the main works carried out during the overhaul: - Retrofitting of a steady rest (SMW) (clamping range 90-350mm) - Replacement of energy chain (Z axis) Dksdpfx Aijy I U Ulswjl - Replacement of all components in the X and Z axis energy chains (cables, hoses, fittings, etc.) - Tailstock repair The machine features a 12-station VDI 50 turret (Duplomatic), 6 tool holders for driven tools, and a 400 mm Berg (KH400) chuck. Control system: Heidenhain. The machine is still in occasional production use. Inspection possible at any time.

Condition: refurbished (used), Year of construction: 1995, functionality: fully functional, power: 367.75 kW (500.00 HP), filling opening width: 700 mm, filling opening length: 1,200 mm, rotational speed (max.): 1,050 rpm, rotational speed (min.): 950 rpm, - Engine: Deutz 500 HP - Fill opening dimensions: 1200x700 mm - Rotor: 4 shafts and 40 stars - 950-1050 rpm - Throughput: 4-6 t/h - incl. new spare rotor & stars Djdoy I Uwaspfx Aiwokl - completely overhauled & modernised

Condition: ready for operation (used), Year of construction: 2007, Make: MAZAK Type of machine: QuickTurn Nexus 250-II Year of manufacture: 2007 Control system: Mazatrol Matrix Nexus Machine's weight: 5.200 kg Tool holder: BMT Speed range: 4.000 1/min Cutting diameter: 380 mm Turning length: 500 mm Tool turret - slots: 12 Pl. Spindle opening: 76 mm Dkodpfx Ajy I Uvieiwjl

Condition: used, Year of construction: 1996, functionality: fully functional, Graule ZS 170 saw, year 1996, 2,000 EUR Graule 6/250 - 160 spindle moulder, year 2008 2,700 EUR Rotary rack for sashes and frames 500 EUR Roller conveyor 7.5 m as buffer for windows before glazing station 600 EUR Dsdpfx Aewp Stzsiwekl

Condition: used, Year of construction: 2001, machine/vehicle number: IntNr231491, Manufacturer: DECKEL MAHO, Model: DMF 220 linear, Year of manufacture: 2001 Control system: Siemens 840D Powerline Travel and Axes X-axis (longitudinal): 2,200 mm Y-axis (transverse): 560 mm Z-axis (vertical): 720 mm Rapid traverse X/Y/Z: 50 m/min X-axis drive: High-dynamic linear drive Work Table Clamping surface: 2,600 x 600 mm Max. table load: 2,200 kg Main Spindle Speed range: 20 - 12,000 rpm (standard) Drive power (100% duty cycle): 35 / 25 kW (S1/S6) Max. torque: 130 / 87 Nm (at 100% duty cycle) Tool holder: SK 40 according to DIN 69871 Tool Changer Number of stations: 30-position magazine Tool change time (chip-to-chip): approx. 4-6 seconds (depending on model) Dedpfoy Htq Aox Aiwjkl Dimensions & Weight Space requirement approx.: 6,500 x 3,500 mm Machine weight approx.: 12.5 t The machine can be inspected under power by appointment. Technical data and specifications subject to change and error; prior sale reserved! Refurbished 5-axis CNC machining center Deckel MAHO DMF 250 linear in good condition. Year of manufacture: 2004. Control: Heidenhain iTNC 530. Technical data: X travel: 2,500 mm. Y travel: 920 mm. Z travel: 820 mm. B-axis: x/- 105° Worktable: 3,100 x 900 mm Spindle interface: HSK 63 Spindle speeds: 20 - 18,000 rpm Tool changer: 30 positions Equipped with: - Chip conveyor - Through-spindle coolant 40 bar - Operating manual Country of origin: Germany Motor power: 35 kW Machine dimensions (LxWxH): 6,000 x 3,800 x 2,950 mm Machine weight: 25,000 kg The machine can be viewed by appointment. Technical data and specifications subject to change and error, as well as prior sale!