Used Glw 4 for sale (57,579)

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm Hnjdpfeguk Dkox Ahvsi - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. Hjdpfx Asfdkbhjhvsni The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) Hnodpfxeguk Dvs Ahvoi - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Treif Breadslicer 4-24MM In good working condition for more information please sent an request Hedpoumpg Refx Ahvsni

Condition: new, SALES FROM STOCK Loading Capacity: 240 kg Max Platform Height: 4 m Occupants: 1 Platform Dimension: 1.15 x 0.6 m Overall Length: 1.32 m Overall Width: 0.76 m Overall Height: 1.92 m Platform Extension: 0.55 m Extension Load: 100 kg Up/Down Speed: 34/25 sec Turning Radius: 0 Maximum Slope: 1.5°/2° Drive Tyres: 230 x 80 mm Gradeability: 25% Wheel Base: 1.0 m Travel Speed (Stowed): 4 km/h Travel Speed (Raised): 0.5 km/h Battery: 2 x 12 V / 100 Ah Lifting Motor: 24 V / 1.3 kW Drive Motors: 24 V / 0.5 kW Charger: 24 V / 15 A Weight: 660 kg Proportional Controls Automatic Pothole Protection Drivable At Full Height Non-Marking Tyres Hnodpsulah Njfx Ahvsi Automatic Brake System Emergency Lowering System Emergency Stop Button Cylinder Holding Valve Onboard Diagnostic System

Year of construction: 1994, condition: excellent (used), 4 side planer 8 8 HARBS heads long table going 3 meters. Machine weight 5500 kg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm. Hodpfx Ael Dw Nxohvjni

Year of construction: 1980, condition: used, Sharpening TOOL VOLLMER FINZ 4-800 Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover Hnsdpocw Dg Dofx Ahvsi startup type negotiated Description Comments GRINDING AUTOMATIC CIRCULAR SAW WIDIOWYCH THE HYDRAULIC

Condition: excellent (used), Year of construction: 2014, 4 Qty Stainless Steel Hoppers 3 Qty Hoppers Dimensions 700mm x 1200mm x 1220mm H. 1 Qty Hopper dimensions 1200mm x 1200mm x 1220mm H Hedpfx Asurf Twohvsni With manual gate valve Gas strut opening lid Internal stainless mesh screen Mobile on lockable castors Some with pneumatic vibration device. Some with level sensor device In excellent condition

Condition: new, Year of construction: 2025, All stainless steel Tumbler Mixer - quick delivery of one machine Manufactured new to order Stainless steel drum in high grade 316 stainless steel Variable speed drum from zero to 24 rpm Electric tipping discharge Capacity 50 Kg to 90 Kg according to product type 2 x Models Hjdpeif Upfjfx Ahvoni

Condition: excellent (used), Year of construction: 1995, still preserved CNC because little in use was used for door production , but can be used for any purpose . Double table, can be mounted from left and right side 4 axes x 5000 mm y 1350 mm z 450 mm a 190° main spindle SK 40 8 kw water cooled up to 17 000 rpm chain magazine with 24 places Hsdpfsig T Epjx Ahvoni

Condition: excellent (used), Year of construction: 2011, WEISHAUPT WM-G10/A-4; With gas train Hsdpjwgym Dofx Ahvoni - Power: 110-1250 kW - Year of manufacture: 2011 - Design: ZM

Condition: excellent (used), Cnc rotary table, Nikken 5AX-230 4 and 5 axis for Mazak etc. was mounted on a VTC 300, due to new machine 5 axis now for sale, Hjdsp U Umkopfx Ahvoni

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 34,000 mm, shelf height: 3,500 mm, support length: 2,700 mm, shelf length: 8,500 mm, frame height: 3,500 mm, load per truss pair (max.): 3,000 kg, frame width: 1,100 mm, number of shelf rows: 4, pallet spaces: 108 euro pallets, 4 rows of pallet racks (4 x M35112711-2) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 2 beam levels, shelf load 3000 kg. - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load plates (BSMcP) Frames bolted, not pre-assembled Hsdpfxov Ukz Ao Ahvoni Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment. - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: used, Nordson Problue 4 Hot Melt Pump Model Problue 4 Complete with 2 heated hose and dispensing guns, air solenoid & modules Glue bead dispensing tub / storage container Mounted on a stainless steel frame Hnjdpfx Ahswq Sv Ejvsi

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, saw blade diameter: 850 mm, saw blade bore: 10 mm, TECHNICAL DETAILS Saw Blade Diameter (without loader): 80 – 850 mm Saw Blade Diameter (with loader): 250 – 450 mm Bore Diameter (from): 10 mm Saw Blade Magazine: Up to 40 pieces Control and Software Control: Industrial PC with Siemens standard PLC Software: For all tooth geometries, including special profiles Hodsypbx Eopfx Ahvsni Grinding Process Sequence 1st Step: After starting, the vacuum gripper picks the top saw blade from magazine 1 and transfers it to the Woodtronic NC4; the cover opens. 2nd Step: Loader returns. The Woodtronic NC4 closes and the grinding program starts. The loader removes the intermediate ring from magazine 1 and loads it into magazine 2. Wait position. 3rd Step: After grinding and opening of the Woodtronic, the loader takes the sharpened saw blade and transfers it to magazine 2. Process Repetition Steps 1 to 3 are repeated until the grinding cycle is complete. Pre-programming possible: The grinding operation continues without interruption, even while programming the next magazine. The Woodtronic NC4 can be preprogrammed during the day and will grind automatically overnight. Measurable with WALTER Saw Check: Rake angles, clearance angles, diameter, number of teeth Tooth geometry: manual input required MACHINE DETAILS Operating hours: 4,197 h (according to previous operator, information unverified) FEATURES - Automatic loader - Walter Saw Check - Measuring device for carbide-tipped circular saw blades

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 03, overall weight: 350 kg, total width: 130 mm, total height: 1,800 mm, input voltage: 380 V, type of input current: three-phase, input frequency: 50 Hz, Equipment: documentation/manual, We have 17 sets of NF42 4/54,2/130，2/84,2/66， Year 1987-2005 With double iron roller With rubber prester With 16-20 Harness Frame With binder thread motion With 6 Contact Rail and Stop Motion Device With 2 weft thread transport Hodpeu A Ir Ejfx Ahvsni State: Clean up and Clean, after repair testing

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 380 mm, roller (top) diameter: 430 mm, side roll diameter: 300 mm, roller diameter: 480 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 1,420 mm, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, overall weight: 20,000 kg, total length: 5,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 20 kW (27.19 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, model capacity 3000x35 mm Digital readout Hydraulic 4 roll plate bending machine, used year 2017 plate thickness rolling 35 mm Hnjdpfx Asyu Nr Djhvoi pre-bend 30 mm minimum rolling diameter ID 480 mm plate max width on the rollers 3100 mm top roll size 430 mm Power on hydraulic unit 20kW Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted Digital position readout Hydraulic rotation central rolls driven parallelism lifetime with torsion bar Pre-pinch load adjustable for pre-bending Drop-end top roll front open for unloading Re-rolling system for welded shells calibration. Safety and emergency stop Manuals and schematics – CE declaration of quality machine dimension 5500x2000x2100 mm weight 20ton --- Additional accessories installed with the machine See layout drawing in enclosed nr.1 central support hydraulic 4 ton capacity to support large shell dia up to 4,5 meters id nr.1 side support hydraulic left side 4 ton doble arm nr. 1 side support hydraulic right side 4 ton double arm

Condition: good (used), mileage: 593,041 km, first registration: 11/2020, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x2, wheelbase: 4,750 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 9,500 mm, total width: 2,550 mm, total height: 3,880 mm, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, retarder, seat heater, traction control, trailer coupling, = Additional Options and Equipment = - 2nd Diesel Tank - Heated Mirrors - Bluetooth - Digital Tachograph - Tachograph (Control Device) - Fixed - LED Lamp - Manual - Radio/Cassette - Lane Departure Warning System - Fabric Upholstery - Topline Hnsdjyu H A Hspfx Ahvji - Additional Brake System = Remarks = Number of axles: 3, Configuration: 6x2, Total tank capacity: 100 liters, 2nd diesel tank, Trailer coupling, Kingpin diameter: 40 DIN, Fifth wheel coupling: Fixed, Number of differential locks: 1, Suspension type: Air suspension, Cab type: Topline, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Auxiliary air conditioning, Auxiliary heating, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: LED lamp, Lane departure warning system, Air conditioning, Seat heating, Bluetooth, Fuel: Diesel, Euro: 6, Transmission type: Opti-cruise, Gearbox type: Scania, Gears: 12, Clutch pedal, Additional brake system, Retarder brand: Retarder, Power steering, ABS, ASR, PTO type: 1, Starter battery, Rotation direction: 1x20, System length: 80 cm, Central locking, Seating configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual = Further Information = Transmission Transmission: SCA, 12 gears, automatic Axle Configuration Tire size: 315/80R22.5 Brakes: disc brakes Suspension: air suspension Axle 1: steered; left tire tread: 9 mm; right tire tread: 9 mm Axle 2: twin tires; left inner tread: 14 mm; left outer tread: 14 mm; right inner tread: 14 mm; right outer tread: 14 mm Axle 3: lift axle; left tire tread: 9 mm; right tire tread: 13 mm Functionality Loading platform height: 123 cm Condition Technical condition: good Optical condition: good Damages: none Number of keys: 2 Financial Information Lease price: €861 per month (default, 60 months); Please inquire for further information and terms Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simply: • Large, fast-changing inventory • Recognizable quality • Good prices • Professional business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration handled quickly • Expert technical service • The security of 'recognizable quality' • And more.... Visit our website for special offers and the full stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 3,153 h, load capacity: 1,800 kg, lifting height: 4,620 mm, fuel type: electric, mast type: triplex, drive type: Elektro, Electric 4-wheel forklift Hjdjyuz R Sopfx Ahvoni Mast type: Triplex Technical condition: good Battery voltage: 48V Battery type: PzS Battery year: 2020 3rd valve, 4th valve, rear work lights, front work lights, roof cover, front windscreen, heater,

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electricity performance: 37,5weight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE!CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons) Now available at a special price ex works Böheimkirchen: only EUR 60,000!(Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards Hnsdovfy Sxepfx Ahvoi Condition: Very good One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electric current: 37,5 KWweight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE! CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons) Now available at a special price ex works Böheimkirchen: only EUR 60,000!(Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled Hjdpfx Ahsv Rtg Tevjni 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards Condition: Very good One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 667 h, load capacity: 3,000 kg, lifting height: 6,500 mm, free lift: 1,950 mm, fuel type: electric, mast type: triplex, construction height: 2,850 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Automatic Hodpfx Aheykcxijvsni Condition: As new Technical condition: Very good Front tires type: Superelastic Front tires condition: 40 - 60% Rear tires type: Superelastic Rear tires condition: 40 - 60% Battery voltage: 80V Battery year: 2020 Description: Price includes new UVV (accident prevention) inspection, very good paintwork (original), the 2020 battery will be reconditioned with a power cycler including Kappa test, matching charger with plug, we are happy to organize cost-effective transport. Leasing or hire-purchase available! We are an official Jungheinrich Germany partner. Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, half-cab, load guard, full free lift, CE certificate, safety light, half-cab with PVC doors.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 3,292 h, load capacity: 2,500 kg, lifting height: 4,000 mm, fuel type: electric, mast type: simplex, construction height: 2,640 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Mast type: Standard Transmission: Automatic Hsdpfex Axafox Ahveni Condition: Refurbished without warranty Technical condition: Very good Front tire type: Superelastic Front tire condition: 20 - 40% Rear tire type: Superelastic Rear tire condition: 20 - 40% Battery voltage: 80V Battery capacity: 775Ah Battery year of manufacture: 2019 Battery condition: 80 - 100% Description: Price includes new UVV safety inspection, paintwork in very good condition, 4x superelastic tires will be replaced, 2019 battery will be regenerated using a power cycler including Kappa test 92% (see last picture), charger included with suitable plug. We can also arrange affordable shipping. Leasing with purchase option available! We are an official partner of Jungheinrich Germany. Sideshift, rear work light, front work light, half-cab, load backrest, safety light, mini levers, PVC doors.

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 4,359 h, load capacity: 1,600 kg, lifting height: 4,500 mm, free lift: 1,450 mm, fuel type: electric, mast type: triplex, construction height: 2,120 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Mast type: Triplex Transmission: Automatic Condition: Refurbished without warranty Technical condition: Very good Front tyre type: Super elastic Front tyre condition: 80 - 100% Rear tyre type: Super elastic Rear tyre condition: 80 - 100% Battery voltage: 48V Description: Price includes new UVV inspection, NEW paintwork. The battery (inspection date: year of manufacture 2020) will be regenerated using a power cycler including a Kappa test. A new battery can be purchased for an additional EUR 3,500 net (offer valid only with forklift purchase). Compatible charger with plug included. We are happy to organise economical transport for you. Lease purchase available! We are official partners of Jungheinrich Germany. Hodpfoxzvx Aex Ahvoni Sideshift, 3rd valve, rear work lights, front work lights, full free lift, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 4,767 h, load capacity: 4,500 kg, lifting height: 4,670 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift Hodsyuz Iwepfx Ahvjni Load center: 600 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tires type: Superelastic Front tires condition: 40 - 60% Rear tires type: Superelastic Rear tires condition: 40 - 60% Battery voltage: 80V Battery year: 2019 Equipment: reach forks, sideshift, 3rd valve, 4th valve, front working lights, heater, road approval (STVZO), full cabin, full free lift, LED, seat,